Heat & Glo LifeStyle XLR-PB-CE manual

1 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 Model: XLR-N-CE XLR-PB-CE • DO NOT store or use gasoli ne or other am- mab le vap ors an d liqu ids in th e v ici nity o f t his or any other appliance. • Whattodoifyousmellgas - DO NOT try to light any appliance. - DO NOT touch any electrical swit[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 2 ListingLabelInformation/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on replace: _____________________ Dealership purchased from: ________[...]

3 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 Safety AlertKey: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicates a ha[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 4  = Contains updated information. D . D e c o r a t i v e F r o n t s ............................... 4 9 14 ApplianceSetup  A. Remove Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . 50 B. Remove the Shipping Materials . . . . . . . . . . . . . . . . .[...]

5 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 B. LimitedLifetimeW arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal an[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 6 B. LimitedLifetimeW arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor . A list of HHT authorized dealers is available on the HHT brande[...]

7 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 A. ApplianceCertication NO T IN TEN DE D FO R US E AS  A P RI MAR Y HEA T SOU RCE .  This appliance is tested and approved as either supplemen- tal room heat or as a decorative appliance. It should not be factored as primary heat in residen[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 8 Figure2.1GeneralOperatingParts B. Y ourFireplace W ARNING! DO NOT operate replace before read - ing and understanding operating instructions. Failure to operate replace according to operating instructions could cause re or injury . Thi s appl iance [...]

9 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 C. ClearSpace W ARNING! DO NOT place combustible objects in front of the replace or block louvers. High temperatures may start a re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. Figure2.[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 10 I. ControlModuleOperation 1. The control module has an ON/OFF/REMOTE selector switch that must be set. See Figure 2.3. OFF Position: Appli ance will ignore all power inputs and will not respond to any commands from a wall switch or optional remote. The unit should be i[...]

1 1 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 1. This appliance is equipped with an ignition device which automatically lights the burner. DO NOT try to light the burner by hand. 2. W ait ve (5) minu tes to clear out any gas. The n smell for gas, inclu din g near the oo r. If you sme ll gas , S TOP ! Fo llo w “[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 12 L. AfterFireplaceisLit InitialBreak-inProcedure • The fireplace should be run three to four hours continuously on high. • T urn the replace off and allow it to completely cool. • Remove xed glass assembly . See Section 14.E. • Cl ean xed gl as[...]

13 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 GlassCleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slamming glass • Avoid[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 14 B. MaintenanceT asks-QualiedService T echnician T o prevent inadvertent burner operation while servicing this appliance: • Unplug DC regulator from junction cord. • Remove batteries from battery pack (if installed). • Shut off gas supply to the appliance. T[...]

15 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 A. T ypical ApplianceSystem NOTICE: Illustrations and photos reect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Figure4.1 T ypicalSystem 4 Get ting[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 16 B. DesignandInstallationConsiderations Heat & Glo direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required. Before[...]

17 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 5 F ramingandC learances  A. Selecting ApplianceLocation Whe n sel ect ing a locat ion for the appl iance it is impo rta nt to con sid er th e r eq uir ed cle aranc es to wa lls (s ee Figur e 5 .1) . W ARNING! Risk of Fire or Burns! Provide adequate clearan[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 18 B. Constructingthe ApplianceChase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should enclosed inside the chase. NOTICE: T reatment of ceiling restops and wall shield restops an[...]

19 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 C. Clearances NOTICE: Install appliance on hard metal or wood surfaces extending full width and depth. DO N OT install d irectly on carpeting, vinyl, tile or any combustible material other than wood. W ARNING! Risk of Fire! Maintain specied air space clearances to applian[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 20 D. MantelandW allProjections W ARN IN G! Ri sk of Fi re! C om ply wi th al l mi ni mum cl ear - an ces to c omb us ti ble s as spe ci ed . F ram ing or  nis hi ng ma ter ial c lo ser t ha n th e mi nim ums l is ted m us t b e co nst ru ct - ed ent ire ly of no[...]

21 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 A. V entT erminationMinimumClearances Figure6.1MinimumHeightFromRoofT oLowestDischarge Opening H (MI N.) - M INIMUM HEIG HT FROM R OOF TO L OWE ST DIS CHA R GE O PENIN G VERTICAL W ALL TERMINA TION CAP HORIZONT AL OVERHANG 30,5 cm X ROO[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 22 O N P R Q V =VENTTERMINAL X = AIRSUPPL YINLET = AREAWHERETERMINAL ISNOTPERMITTED Figure6.3 MinimumClearancesforT ermination A = 31 cm ......................cle aran ce s abov e grad e, ver and a, por ch, de ck or bal cony B = 3[...]

23 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 A. ApprovedPipe This appliance is approved for use with Hearth & Home T echnologies SLP venting systems. Refer to Section 17.B for vent component information. DO NOT mix pipe, ttings or joining methods from differ- ent manufacturers. The pipe is tested to be run in[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 24 Figure7.3 T opV ent-HorizontalT ermination V entingwith1elbow H 1 V 1 VMinimum H 1 Maximum 90 Elbow 61,0 cm 30,5 cm 91,4 cm 61,0 cm 1,5 m 91,4 cm 2,1 m 120 cm 4,3 m H Max. =4,3 m V + H Max. = 12,2 m Fire Risk. Explosion Risk. Do NOT pack insulation or[...]

25 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 INST ALLED HORIZONT ALL Y H 1 H 2 V 1 Figure7.4 1. T opV ent-HorizontalT ermination - (continued) T opV ent-HorizontalT ermination V entingwith2elbows Note : Use SLP Series components only . VMinimum H 1 + H 2 Maximum 90° Elbow 3[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 26 Figure7.5V erticalV entMaximum Note : If installing a vertical vent/termination of f the top of the appliance, the optional exhaust restrictor may be needed. V 1 V 1 =13,4m T opV ent-V erticalT ermination NoElbows Note : Use SLP Series com[...]

27 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 Figure7.8 H 1 V 1 V 2 T opV ent-V erticalT ermination V entingwith2elbows Note : Use SLP Series components only . V 1 Minimum HMaximum V 2 V 1 + V 2 Minimum 90° Elbow 61,0 cm * * 15,2 cm 91,4 cm * * 45,7 cm 1,5 m * * 91,4 cm 2,1 m * * 1,1 m 4,6[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 28 IN STALLED HO RI ZON T ALL Y H 1 H 2 V 1 V 2 Figure7.9 T opV ent-V erticalT ermination V entingwith3elbows Note : Use SLP Series components only . V 1 Minimum H 1 + H 2 Maximum V 2 V 1 + V 2 Minimum 90° Elbow 30,5 cm * * 30,5 cm 61,0 cm * * 61,[...]

29 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 T opV ent-V erticalT ermination V entingwith4elbows Note : Use SLP Series components only . V 1 Min. H 1 Max. V 2 Min. H 2 Max. V 3 Min. 45,7 cm 1,2 m 1,2 m 1,2 m 1,0 m V 1 + V 2 + V 3 + H 1 + H 2 Maximum= 12,2 m V 1 H 1 V 2 V 3 H 2 Figure7.10[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 30 Note: Heat shields MUST overlap by a minimum of 38 cm. • SLP heat shield - designed to be used on a wall 1 1,1 cm to 19,4 cm thick. • If wall thickness is less than 1 1,1 cm the existing heat shields must be field tricmed. If wall thickness is greater than 19,4 cm a DVP-HSM[...]

31 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 C. InstalltheCeilingFirestop A ceiling restop MUST be used between oors and attics. • SLP pipe only - Frame opening 22,86 cm x 22,86 cm whenever the vent penetrates a ceiling/floor (see Figure 8.3). • Frame the area with the same sized lumber as used[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 32 D. Install AtticInsulationShield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc. requires the use of an attic shield. Attic shields must meet specied clearance and be se- cured in place. FlatC[...]

33 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 ELBOW HEA T SHIELD SHOWN IN SHIPPING POSITION A. T opV ent CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. 9 AppliancePreparation  Figure9.1ElbowShieldSho[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 34 B. SecuringandLevelingthe Appliance W ARNING! Risk of Fire! Prevent contact with: • Sagging or loose insulation • Insulation backing or plastic • Framing and other combustible materials Block openings into the chase to prevent entry of blown- in insulation.[...]

35 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 1 0 Inst allingV entPi pe( SL PP ipe )  Figure10.2HighT emperatureSiliconeSealant (300ºFminimumcontinuousexposurerating) A. AssembleV entSections T o attach the rst vent component to the starting collars of the appliance[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 36 C. SecureTheV entSections • V er t i ca l r un s o f pi p e mu s t be su pp o rt ed ev er y 2 44 cm . • Horizontal sections must be supported every 152 cm. • V ent supports or plumbers strap (spaced 120º apart) may be used to support. See Figures 10.5 and 10.[...]

37 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 D.  Di sa ss em bl e V en tS ec ti on s • Rota te either se ction (s ee F igure 10 .7) so the seams on both pipe s ectio ns are alig ned as show n in F igure 10.8. • Pull carefully to separate the pieces of pipe. Figure10.8 AlignandDisassembleV en[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 38 F . InstallMetalRoofFlashing • See minimum vent heights for various pitched roofs (Figure 10.1 1) to determine the length of pipe to extend through the roof. • Slide the roof ashing over the pipe sections extending through the roof as shown in Figure 10.12. F[...]

39 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 SCREWS CAULK STORM COLLAR (1of3) Figure10.15 TERMINA TIONCAP H. InstallV erticalT erminationCap • Attach the vertical termination cap by sliding the inner collar of the cap into the inner ue of the pipe section while placing the outer collar of the [...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 40 Figure10.17V entingthroughthewall K. InstallHorizontalT erminationCap W ARNING! Risk of Fire! The telescoping ue section of the termination cap MUST be used when connecting vent. • 3,8 cm minimum overlap of ue telescoping section is require[...]

41 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 1 1 GasInfor mation  A. GasPressureRequirements Pressure requirements for XLR-CE replaces are shown in T able 1 1.1 below . T wo taps are provided on the right hand side of the gas control for a test gauge connection to measure the inlet and outlet pressure[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 42 C. Optional AccessoriesRequirements • This appliance may be used with a wall switch, wall mounted thermostat and/or a remote control. Wiring for optional Hearth & Home T echnologies approved accessories should be done now to avoid reconstruction. Follow instructi[...]

43 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 D. ElectricalServiceandRepair W ARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. W ARNING! Risk of Shock! Replace damaged wire [...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 44 1 3 Finis hing  A. FramingandFinishingInstructions W ARN IN G! Ri sk o f Fi re ! Co mpl y wi th a ll mi nim um cle ar - an ces to com bus tib les as sp ec i ed. Fr ami ng cl os er tha n th e mi nim ums li ste d mu st be co ns tru ct ed en ti re ly of no nc [...]

45 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 W ARNING! Risk of Fire! Maintain specied air space clearances to combustibles. Failure to comply with these instructions may cause a re or cause the appliance to overheat. = NO SCREWS ALLOWED = 2,5 cm MAX. SELF-T APPING SCREWS ALLOWED = 13 cm – 18 cm SELF-T APPING SCREW[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 46 Note: The lower cover panel must be pushed all the way down. The outer nishing anges should line up. The replace opening must be between 43 cm and 44 cm for the decorative fronts to t correctly . See Figure 13.4. FinishandSealingJoints All joints between[...]

47 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 B. MantelandW allProjections W ARN IN G! Ri sk o f Fi re ! Co mpl y wi th a ll mi nim um cle ar - an ces to com bus tib les as sp ec i ed. Fr ami ng cl os er tha n th e mi nim ums li ste d mu st be co ns tru ct ed en ti re ly of no nc om- bu sti ble m ate ria ls [...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 48 Non-Combustible Finish Material 0-10 cm Thick Bottom Joint 1,9 cm 1,9 cm 4,6 cm Figure13.9NoncombustibleSurfaceFinishingMaterial0-10 cmThick-InsideFitMethod(T onicDecorativeFront Only) Figure13.8InsideFitMethod?[...]

49 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 D. DecorativeFronts W ARNING! Risk of Fire! A decorative front is required for this model. DO NOT operate this appliance without a decorative front in place. Only doors certied for use with this appliance model may be used. Contact your dealer for a list of doors that [...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 50 A. RemoveFixedGlass Assembly See Section 14.E. B. RemovetheShippingMaterials Remove shipping materials from inside or underneath the rebox. The standard black rock media and manual bag assembly are also shipped underneath the rebox. C. Cleant[...]

51 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 Figure14.2 AirShutter G. AirShutterSetting The air shutter is preset at the factory . AirShutterSettings N P B XLR 0,16 cm 0,80 cm Full Open H. MediaOptions In sta ll onl y ap pro ved me di a opt ion s. Th ese o pt ion s i ncl ude : • MEDIA-AM[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 52 A. IntelliFirePlus™IgnitionSystem Symptom PossibleCause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark. a. Incorrect wiring. V erify “S” wire (white) for sensor and “I” wire (orange) for ignitor are connected t[...]

53 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 IntelliFirePlus™IgnitionSystem-(continued) Symptom PossibleCause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot ame has been lit, ame rectication has n[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 54 1 6 ComponentAccess  W ARNING! Risk of Fire, Electric Shock and Burns! T urn off power to module and valve by unplugging the 6V transformer from the junction cord and remove batteries from battery tray (if installed), before removing xed glass assembly . A. D eco[...]

55 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 Figure16.5RemoveV alvePlateScrews 3. Set the valve bracket on the front lip of the rebox bot- tom. T urn “off” the ball valve. Disconnect gas valve from the gas ex ball valve assembly at the pressure tting. See Figure 16.7. Figure16.6Remo[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 56 G. GasV alveReplacement Once the valve assembly has been removed, the gas valve, pilot assembly , orice ex tube, and ex ball valve can be replaced. 1. Place the valve assembly on a clean, stable surface to service or replace any components. 2. Disconnect the o[...]

57 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 1 7 ReferenceMater ials  A. ApplianceDimensionDiagram Di me ns ion s ar e ac tua l ap pl ia nc e dim en si on s. U se fo r re fe re nce o nl y. F or f ram in g di me nsi on s an d cl ea ran ce s re fe r to Se ct io n 5. A B G Q C L D E H O F P N Ø I J K M S R[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 58 29,5 cm 14,6 cm 18,1 cm 30,8 cm DRC-RADIUS Cap Shield 35,2 cm 24,1 cm 356 cm DVP-BEK2 DVP-HPC Cap Brick Extension 35,2 cm 1 2, 7 cm 30,2 cm COOL-ADD Cap Shield Figure17.2V entComponents B. V entComponentsDiagrams[...]

59 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 22,2 cm 16,5 cm 16,8 cm 15,2 cm 16,5 cm 16,8 cm 25,1 cm 16,5 cm 23,5 cm SLP-45-45°Elbow SLP90-90°Elbow Effective Height/ Length SLP-PIPE SLP-HVS HorizontalPipe Support SLP-FS CeilingFirestop SLP-WS W allShieldFirestop B. V entComponentsD[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 60 SLK-SNKD Snorkel T erminationCap SLP-TVHW V ertical T erminationCap SLP-CCS-BK CathedralCeiling SupportBox-Black SLP-DCF-BK CeilingFirestop Black SLP-WT -BK W allThimble-Black B. V entComponentsDiagrams (continued) SL-2DVP Adapter Figure17[...]

61 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 SLP-TRAP Horizontal T ermination Cap 38,4 cm Note: Heat shields MUST overlap by a minimum of 3,8 cm. The heat shield is designed to be used on a wall 10,2 cm to 18,4 cm thick. If wall thickness is less than 10,2 cm the existing heat shields must be field tricmed. If wall thickn[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 62 C. ServiceParts XLR-N-CE,XLR-PB-CE BeginningManufacturingDate:March2010 EndingManufacturingDate:______ IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and seri[...]

63 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 ServiceParts XLR-N-CE,XLR-PB-CE IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . ITEM DESCRI[...]

Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 64 C. ServicePartsList XLR-N-CE,XLR-PB-CE IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized deal[...]

65 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev . J • 5/12 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215th Street West, Lakeville, MN 55044 www .heatnglo.com D. ContactInformation Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat & Glo de[...]