Hitachi DZ-MV580E DZ-MV580E(AU) DZ-MV580E(SW) DZ-MV580E(SWH) DZ-MV580E(UK) DZ-MV550E DZ-MV550E(AU) DZ-MV550E(SW) DZ-MV550E(SWH) DZ-MV550E(UK) manual

SERVICE MANUAL SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT Digital Media Division,Tokai DVD VIDEO CAMERA/RECORDER 2004 March SM0404 DZ-MV580E DZ-MV580E ( AU ) DZ-MV580E ( SW ) DZ-MV580E ( SWH ) DZ-MV580E ( UK ) DZ-MV550E DZ-MV550E ( AU ) DZ-MV550E ( SW ) DZ-MV550E ( SWH ) DZ-MV550E ( UK ) MultiMediaCard TM DO NOT RESELL OR DIVERT[...]

T able of Contents 1 Safety Precaution for Repair ............. 1-1 1-1 Cautions ................................................... 1-1 1-2 Electrostatic Protection Measures ............ 1-2 1-3 Cautions When Handling D VD Drive ......... 1-2 1-4 Lead-F ree Solder ...................................... 1-3 1-5 Notes When Using Ser vice Manual ....[...]

(18) Drive Bloc k and Side Case-R ................ 5-14 (19) Loader , DRF-H/DRF Circuit Board, Disc Drive Unit, Loc k Unit, and Fr ame ... 5-15 (20) Fulcr um Cov er-U , Fulcr um Cov er-B, and Fulcrum Unit ................................... 5-16 (21) LCD Case-B and LCD Circuit Board ...... 5-16 (22) GYR-H Circuit Board, Lens F rame , Lens Unit Cush[...]

C Circuit Board Dia grams ..................... C-1 C-1 GYR-H ................................................... C-1 C-2 GYR ...................................................... C-1 C-3 FR T -H .................................................... C-2 C-4 FRT ....................................................... C-2 C-5 DRF-H/DRF ..............[...]

1 - 1 Safety Precaution for Repair 1 1-1 Cautions Many electrical and mechanical parts have special safety-related characteristics. These are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by using replacement components rated for a higher voltage, wattage, etc. Replacement parts which have [...]

1 - 2 Safety Precaution for Repair > Electrostatic Protection Measures / Cautions When Handling DVD Drive 1-2 Electrostatic Protection Measures Semiconductor components can be damaged by static electricity charged on clothes, human body, etc. Take great care when handling components to avoid electrostatic damage, and perform servicing in an envi[...]

1 - 3 Point to be soldered For reflow For dip Composition of alloy (wt%) Solder paste: Sn-3Ag-0.5Cu Bar solder: Sn-0.6Cu 1-4 Lead-Free Solder The printed circuit board that uses lead-free solder is adopted. To protect the global environment, use the recommended lead-free solder also during servicing. Read and observe the following before soldering:[...]

1 - 4 (5) Cautions when using lead based solder It is recommended that you use lead-free solder when servicing, but it is also possible to service using lead based solder. However, if lead based solder is used for servicing, take care with the following: 1) Before using lead based solder, remove the lead-free solder completely from the point to be [...]

1 - 5 1-5 Notes When Using Service Manual (1) Value units used in parts list Certain symbols are indicated as shown below for value units of resistors, capacitors and coils in parts list. When you read them, note the following regular indications: (2) Values in schematic diagrams The values, dielectric strength (power capacitance) and tolerances of[...]

1 - 6 (4) Table for indexing locations of parts This table shows locations of each part on circuit board diagrams. The locations are indicated using the guide scales on the external lines of diagrams. 2) Two diagrams indicated for each board 1) One diagram indicated for each board Safety Precaution for Repair > Notes When Using Service Manual Pa[...]

2 - 1 General Description 2 Parts Name Disc drive unit Lens unit AEL-H/AEL circuit board (*1) DRF-H/DRF circuit board (*1)(*2) FRT-H/FRT circuit board (*1) GYR-H/GYR circuit board (*1) LCD circuit board MAN-H/MAN circuit board(*1) MR circuit board (*3) SAF-H/SAF circuit board (*1)(*4) SEN-H circuit board (*1)(*5) SHE-H/SHE circuit board (*1) SWL2 c[...]

2 - 2 2-2 Features QUICK MODE switch mounted The new DVD video camera/recorder has a QUICK MODE switch that switches the on-screen display between Quick mode and Normal mode: The new timer of video camera/recorder can easily operate the screen display in Quick mode. The Quick mode displays only the fundamental menu items; a brief explanation of the[...]

2 - 3 Specifications Item Maximum number of recordable photos Recording format Audio playback format Recording media Jacks Battery system Power consumption (when recording with LCD monitor off ) Dimensions (W × H × D, excluding projections) Operating temperature (humidity) Storage temperature Weight (without battery and disc) Total weight when re[...]

2 - 4 Specifications Item Provided accessories AC adapter/charger (model DZ-ACS1) Power cable DC power cord, Battery (model DZ-BP14S) AV/S input (*1) /output cable Infrared remote control (model DZ-RM3W) Lithium battery for remote control (model CR2025) Lens cap Lens cap string Shoulder strap Software CD-ROM PC connection cable Single-sided 8cm DVD[...]

2 - 5 2 - 4 Major Differences from Previous Models Item CCD Lens Zoom Filter diameter Required minimum illumination Viewfinder LCD monitor Power consumption Weight Accessory Shoe PC connection terminal [USB standard] DZ-MV580E/MV550E DZ-MV580E: 1/3.8-inch interlaced DZ-MV550E: 1/6-inch interlaced DZ-MV580E: Approx. 1,020,000 pixels DZ-MV550E: Appro[...]

2 - 6 Dimensions (W × H × D) and shape AC adapter/charger Battery pack Infrared remote control AV input (*1) /output jack Shape of DVD holder PC editing kit Disc protect EIS function QUICK MODE switch Line input function Number of pixels for video (MPEG2) Number of pixels for JPEG photo during camera recording Number of pixels for MPEG photo duri[...]

2 - 7 Item DZ-MV580E/MV550E DZ-MV380E/MV350E Number of pixels for photo during line input recording (*1) File size of photo JPEG: 640 × 480 pixels MPEG: 704 × 576 pixels DZ-MV580E: FINE: Approx. 512KB NORM: Approx. 384KB ECO: Approx. 256KB DZ-MV550E: FINE: Approx. 128KB NORM: Approx. 64KB ECO: Approx. 32KB Line input function is not provided. DZ-[...]

2 - 8 2-6 Compatibility of Recorded Discs Discs recorded or edited on DZ-MV580E/MV550E can also be recorded, edited and played back on other DVD video camera/recorders, except for those for which disc-protect (*1) has been set. Discs recorded or edited on other DVD video camera/recorders can also be recorded, edited and played back on DZ-MV580E/MV5[...]

2 - 9 2 - 7 Names of Parts General Description > Names of Parts A/V MIC BA TTERY EJECT 14 12 13 56 8 9 (Inside the co ver) (Bottom) 10 11 13 4 7 2 1 Infrared receiver When the remote control is used to operate the D VD video camera/recorder, this receiv er will receive the infrared signal. 2 Lens cap string attachment hole 3 Recording indicator [...]

2 - 10 General Description > Names of Parts 28 FULL AUT O button T o switch the D VD video camera/recorder to full automatic. 29 FOCUS button T o switch between manual f ocus and autofocus. 30 EXPOSURE button Press this button to adjust the e xposure. 31 BLC (backlight compensation) button Press this button when subject is being lighted from rea[...]

2 - 11 Index A C D E F I J L M 2 - 8 List of Abbreviations and Terms for DVD Video Camera/Recorders Explanation See Dolby AC3. Content Protection for Recordable Media: Copyright protection function that is suitable for online distribution of music. Design rule for Camera File system standard: This camera file system standard, established by JEIDA ([...]

2 - 12 Index Abbreviation/Term Explanation M O S T U V MPEG MPEG Audio Layer 2 MultiMediaCard MultiMediaCard Association OSTA SCSI SDA SD Card Association SDMI SD Memory Card SecureMMC Secure MultiMediaCard Software disc- Protect STN LCD TFT LCD UDF USB VBR Motion Picture Experts Group: Standard related to compression of digital video and audio. MP[...]

2 - 1 3 General Description 2 a 2-1 a Overview The DZ-MV1000E(UK) is a DVD video camera/recorder that is the result of changes in some structural components of DZ-MV550E(UK) and accessories: Specifications and functions are identical to those of DZ-MV550E(UK). 2-1-1 a Servicing method The service method for the DZ-MV1000E(UK) is the same as that fo[...]

3 - 1 Description of Operation 3 3 -1 Description of Structure (1 ) Configuration and locations of circuit boards The configuration of circuit boards in DZ-MV580E/MV550E and their locations are very similar to those in the base models DZ-MV380E/MV350E, except for whether the FAF circuit board is provided or not. The DZ-MV380E/MV350E had the FAF cir[...]

3 - 2 (2 ) Differences in structure between DZ-MV580E and DZ-MV550E There are two major differences in structure between DZ-MV580E and DZ-MV550E: 1) Accessory shoe The accessory shoe on DZ-MV580E has a power/control terminal, but the accessory shoe on DZ- MV550E doesn’t. 2) Lens unit The lens unit in DZ-MV550E includes the cushion, crystal filter[...]

3 - 3 3 - 2 Description of Newly Adapted Technology ( 1 ) QUICK MODE switch The QUICK MODE switch changes over the screen for various settings and for Disc Navigation between Quick mode and Normal mode. The Quick mode displays only the fundamental menu items and the brief explanation on the selected item/function is displayed across the bottom of s[...]

4 - 1 4 4-1 Procedure for Troubleshooting Perform troubleshooting in the order shown in Fig. 4-1-1. Troubleshooting *1: Messages and error codes will appear on LCD monitor or in viewfinder. Fig. 4-1-1 Note: 1) Before troubleshooting or servicing, be sure to obtain customer approval for the following: 4-5-1 List of items to be reset a) The image dat[...]

4 - 2 4-2 Problem Guide Check the following before judging that this DVD video camera/recorder is faulty. Symptom Battery cannot be charged. Battery weakens fast. The CHARGE indicator on AC adapter/charger is blinking. Power turns off immediately after being turned on. Power goes off unexpectedly. Power cannot be turned off. Cause and Correction Is[...]

4 - 3 Pressing the REC button will not start recording. Recording starts but stops immediately. Power switch does not change to PHOTO (disc). LCD screen is hard to see. Black dots or red, blue or green dots always lit appear on LCD screen or in Viewfinder. Focus is not correct. Symptom Cause and Correction Is input image copy-guarded? The specifica[...]

4 - 4 Symptom Cause and Correction Recognition of disc is not complete. Pressing the playback button will not start playback. No playback image appears on TV screen. Playback picture is momentarily interrupted. Poor playback picture. Playback picture is greatly distorted. No sound. Disc Navigation thumbnails do not appear. Photos on card cannot be [...]

4 - 5 Symptom Cause and Correction No drive icon appears on PC. A fatal exception 0A error occurs while installing USB driver in Windows 2000 Professional Application is not normally run on PC. DISC EJECT button does not work when the DVD video camera/recorder is connected to PC. Disc cannot be ejected even by operating Windows Explorer or applicat[...]

4 - 6 Symptom Cause and Correction DVD-RAM/R/RW drive built into PC cannot be used after the provided software has been installed. Video is not recognized by software in PC. DVD-R disc cannot be played back on DVD- MovieAlbumSE Error appears when starting DVD-MovieAlbumSE Video written to hard disk of PC using DVD- MovieAlbumSE copy tool cannot be [...]

4 - 7 Troubleshooting > Problem Guide Symptom Cause and Correction “DISC ERROR” appears when releasing write-protect The “capture” function of MyDVD is unavailable. Power does not come on, or no operation occurs by pressing button. The date and time are incorrect. No scene can be deleted. Disc cannot be removed. A disc that was write-pro[...]

4 - 8 The DVD video camera/ recorder cannot be operated from remote control. Disc cover cannot be closed. Operating sound is heard cyclically. the DVD video camera/ recorder vibrates. Slight sound is heard from the DVD video camera/ recorder. Is the remote control pointed at the infrared receiver on the DVD video camera/ recorder? Point it at the i[...]

4 - 9 4-3 Messages and Troubleshooting Some messages may appear on the LCD screen or in the viewfinder during operation. If a message appears, refer to the following table and perform troubleshooting according to the message. Messages divided by broken lines will automatically appear in sequence from the upper row each time the center of joystick i[...]

4 - 10 Message Cause/condition for message to appear Troubleshooting Cannot replace thumbnail on PHOTO scenes. Cannot select any more scenes CARD ALMOST FULL Card error has occurred. Format the card now? Card error has occurred. Formatting is not complete. Card error has occurred. Keep card inside & restart. Card error. Card full. Card full. Ca[...]

4 - 11 Message Cause/condition for message to appear Troubleshooting Control Information Error. COPY PROTECT Data error in a part of image file. Repair disc now? YES NO Appears if mismatch has occurred between the recorded video and the scene information because editing was performed near the limit of disc storage capacity on a device other than th[...]

4 - 12 Message Cause/condition for message to appear Troubleshooting Data error in all image file. Repair all data now? YES NO DISC ×××× (4-digit alpha-numerals showing the code of trouble will appear in ××××.) DISC ACCESS DISC ALMOST FULL Disc error Disc error has occurred. Finalizing is not complete. Appears if writing to file cannot be c[...]

4 - 13 Message Cause/condition for message to appear Troubleshooting Disc error has occurred. Format the disc now? YES NO Disc error has occurred. Formatting is not complete. Disc error has occurred. Keep disc inside & restart. Disc full. Cannot execute. Disc has no data. Disc has no PlayList. Disc includes protected scenes. Delete scenes? YES [...]

4 - 14 Message Cause/condition for message to appear Troubleshooting Disc is not formatted. Format the disc now? YES NO Disc is not formatted. If it formats, it becomes possible to use for camera. However, when you record from PC connection terminal, please do not format. Format the disc now? YES NO Disc overheat. Please retry later. DPOF is not se[...]

4 - 15 Message Cause/condition for message to appear Troubleshooting Error has occurred. Error code No. ×××× Please read the manual. (4-digit alpha-numerals showing the code of trouble will appear in ××××.) Error has occurred. Please reinsert a disc. Error has occurred. Please restart. Error occurred. Please replace disc or format disc Erro[...]

4 - 16 Message Cause/condition for message to appear Troubleshooting JPEG file related to scenes are not found. No card No card. Please insert card. NO DISC No more scenes. Play List was deleted. Play Lists over limit. Same scenes on PlayList will be deleted. Delete scenes? YES NO Scenes over limit. Cannot add scenes. Scenes over limit. Cannot divi[...]

4 - 17 Message Cause/condition for message to appear Troubleshooting Scenes over limit. Cannot move scenes. Stop processing. There was no scene which can be deleted. This card cannot be used. Please replace card. This disc cannot be used. Please replace disc. This disc is recorded by the NTSC system. Please replace disc. Top scenes cannot be divide[...]

4 - 18 Message Cause/condition for message to appear Troubleshooting Appears if a battery is used when repairing video files. The specifications state that video files can be repaired only when the AC adapter/charger powers the DVD video camera/recorder. Appears if an attempt is made to copy video to card. The specifications state that no video is [...]

4 - 19 Troubleshooting > Self-Diagnosis Function and Troubleshooting 4-4 Self-Diagnosis Function and Troubleshooting Restriction: The information included in this section is exclusively for service personnel. Do not disclose it to persons other than service engineers. This DVD video camera/recorder is equipped with a self-diagnosis function: If [...]

4 - 20 Fig. 4-4-3 Example of Message (displayed in modes other than during power on or recording) Fig. 4-4-4 Example of Message (displayed during recording) Troubleshooting > Self-Diagnosis Function and Troubleshooting (2) Messages for serious problems These messages appear when solving the problem detected when power is turned on or during oper[...]

4 - 21 Fig. 4-4-5 Example of Error Code Display Troubleshooting > Self-Diagnosis Function and Troubleshooting 4-4-2 Error codes stored in flash memory (1) Displaying error codes and clearing them Display method 1) Connect the battery or AC adapter/charger, and then set the power switch to “VIDEO”. 2) Display the error using the following but[...]

4 - 22 Error code 0400 1100 10AE 10AF 0280 2881 Contents of problem Recognition of disc failed. Reading of data from disc failed. Disc physically damaged, i.g., scratched or distorted. The optical pickup in disc drive unit failed to move. Recognition of disc failed. [This message is likely to appear frequently when the ambient temperature is too lo[...]

4 - 23 3122 3126 3133 7601 7890 7791 3105 E000 EC87 F100 F526 F571 F572 F573 F600 F700 F924 FB24 FB34 FB44 Recording on DVD-RAM disc failed. Writing data file to disc failed. It takes much more time than necessary to process start or end of recording (timeout error). Recording on DVD-R disc failed. Formatting DVD-RAM disc failed. When recording pho[...]

4 - 24 4-5 System Resetting/Resetting Camera Functions This DVD video camera/recorder has two types of reset function: “System reset” and “Resetting camera functions”. The reset operation will return the various settings to the defaults when the DVD video camera/ recorder was shipped from factory. Information: If a defect occurs in product,[...]

4 - 25 Troubleshooting > System Resetting/Resetting Camera Functions Table 4-5-1 List of items to be reset Yes: Will be reset No: Will not be reset Item Program AE White Bal. EIS Dig. Zoom MIC Filter 16:9 VIDEO Mode Quality Input Source PHOTO Input Self Timer OSD Output Date Mode Date Set Default at factory Auto Auto On 40× Off Off FINE FINE CA[...]

4 - 26 4-5-2 System reset procedure 1) Set the power switch to “POWER OFF”, and then disconnect the battery or AC adapter/ charger. 2) Use a fine tipped pen, etc. to hold down the RESET button for approx. 2 seconds. 4-5-3 Procedure for resetting camera functions 1) Connect the battery or AC adapter/charger. 2) Set the power switch to “VIDEO?[...]

4 - 27 4 - 6 Checking Versions of Firmware and Updating This DVD video camera/recorder stores the 4 types of firmware shown in Table 4-6-1 in flash memory. These firmware programs will be updated whenever necessary to improve the performance of this DVD video camera/recorder. Check to see whether any defects in this DVD video camera/recorder can be[...]

4 - 28 (3 ) Details of version display screens Item Model System Ver. Date Cam Ver. Drive (Main) Drive (Core) Display contents Model name Version number of system firmware Date/time when system firmware was created Version number of Camera microprocessor firmware Version number of drive main firmware Version number of drive core firmware Table 4-6-[...]

4 - 29 Troubleshooting > Checking Versions of Firmware and Updating Fig. 4-6-2 Model: DZ-MV5-P AL System: V er . ×.×× Drive (Main): ××××.××.××.REV Drive (Core): ××××.××.××.REV Updating Star t Screen System Update Screen Drive (Main) Update Screen Drive (Core) Update Screen Updating Completed Screen Screen of V erifying the V e[...]

4 - 30 4-7 Trouble Diagnosis Information: 1) Use the DZ-ACS1 adapter/charger to power the DVD video camera/recorder for trouble diagnosis. 2) The trouble diagnosis table was prepared presupposing that the circuit boards have been normally attached and connected. Therefore, make sure beforehand that the circuit boards are correctly connected, that c[...]

4 - 31 Symptom No power Date/time is incorrect Auto-focus does not operate. No zoom works even if zoom lever is operated. Service position (A) (B) ----- ----- (A) Check points F0501 [MAN-B] F0502 [MAN-B] F0503 [MAN-B] F0504 [MAN-B] TL0504 [MAN-B] IC1503- 53 to 56 [MAN-B] (Do not solder lead wire) TL0510 [MAN-A] TL0511 [MAN-B] TL0512 [MAN-A] TL0513 [...]

4 - 32 Symptom Service position Check points Detail of check Troubleshooting due to check results DISC EJECT button does not operate REC button does not operate Left button/ joystick does not operate QUICK MODE switch does not operate No image on LCD monitor No image in viewfinder (EVF) Block noise appears during video recording Camera recorded ima[...]

4 - 33 Symptom Service position Check points Detail of check Troubleshooting due to check results No sound from speaker No audio from AV input/output terminal Audio from built- in microphone cannot be recorded Audio from external microphone cannot be recorded When a darkish scene is recorded, a bright point will appear on the screen for external ou[...]

4 - 34 Symptom Service position Check points Detail of check Troubleshooting due to check results Even if a normal disc is inserted, message "DISC ACCESS" continues to appear, and the disc is not recognized. Message "NO DISC" appears approx. 1 second after a normal disc is inserted. Message "NO DISC" appears within 10 [...]

4 - 35 4-7-2 Disassembly/reassembly to enable service position Prohibition Be sure to disconnect the AC adapter/charger or battery from the DVD video camera/recorder. The DVD video camera/recorder has a built-in laser emitter block. Never look into it: If Laser beam strikes your eye, it could cause serious vision damage. Information: Numbers in dia[...]

4 - 36 2) Attach the MAN-H/MAN circuit board independently to the frame, and connect the DRF-H/DRF circuit board to it. 3) Assemble the USB holder, USB-H/USB circuit board and rear cover. 4) Assemble the disc cover so that hinge 1 of side case-R fits into point 2 at the top of inside of disc cover. Do not incline the disc cover at this time: Inclin[...]

4 - 37 (2) Setting to service position (B) Service position (B) is mainly used for trouble diagnosis of the video and audio signal systems. Perform trouble diagnosis using the check points on MAN-H/MAN and AEL-H/AEL circuit Remove the MAN-H/MAN and AEL-H/AEL circuit boards in advance, referring to “5 Disassembly and Reassembly”. 1) Solder a lea[...]

4 - 38 Troubleshooting > Trouble Diagnosis 2) Assemble the MAN-H/MAN and AEL-H/AEL circuit boards on the frame. 3) Assemble the SHE-H/SHE circuit board and accessory shoe. (See Fig. 4-7-7) 4) Assemble the USB holder, USB-H/USB circuit board, rear cover and EVF unit.(See Fig. 4-7-8) 5) Assemble the disc cover so that hinge 1 of side case-R fits i[...]

4 - 39 (3) Setting to service position (C) Service position (C) is mainly used for trouble diagnosis of the system of operation buttons on side case-L. Perform trouble diagnosis using the check points on MAN-H/MAN and AEL-H/AEL circuit boards. Set to service position (B) in advance. 1) Connect the L block to AEL-H/AEL circuit board. (See Fig. 4-7-1[...]

4 - 40 (4) Setting to service position (D) Service position (D) is used for trouble diagnosis of the LCD monitor. Remove the LCD case-U, MR circuit board and fulcrum block in advance, referring to “5. Disassembly and Reassembly”. 1) Connect the flat cable of fulcrum block to LCD and AEL-H/AEL circuit boards. 2) Connect the MR circuit board to L[...]

4 - 41 4-8 Procedure for Removing Disc from Faulty the DVD Video Camera/Recorder 4-8-1 Item to be checked Connect the AC adapter/charger or charged battery pack (power supply), making sure the ACCESS indicator turns off, and then press the DISC EJECT button again. Note: Even with normal product, the disc cannot be removed while the ACCESS indicator[...]

4 - 8 -2 a How to remove disc - DZ-MV1000E(UK) If the disc cannot be ejected after performing “ 4-8 -1 Items to be checked”, remove it using the procedure in this section. Information: Numbers in diagrams are step numbers of setting procedure, and letters in brackets [ ] show the types of screw. 1) Turn the hood in the direction of the arrow to[...]

4 - 42 4-9 Special Functions Restriction: The information included in this section is exclusively for service personnel: Do not disclose it to persons other than service engineers. 4-9-1 Forced formatting of DVD-RAM disc (1) Application/Symptom Perform this procedure when the Disc Navigation screen does not start normally due to a defect in data on[...]

4 - 43 Troubleshooting > Special Functions 4-9-2 EEPROM data backup and write (1) Application Perform this work whenever you replace the MAN-H/MAN circuit board on which the EEPROM is mounted. Create a backup file of the data in EEPROM to be replaced in a PC, and write the backup file to new EEPROM: Some adjustment items that are performed after[...]

4 - 44 Troubleshooting > Special Functions DZ-A CS1 REMO VE THE ADJUSTMENT CO VER [Ref er to "(1) Adjustment cover" in "5-3 Disassembly".] SKYLARK CONNECTION JIG (No . TP14161) WHT RD (PIN 18) YEL BLK BLK RED DSP-R JIG (No . 7099448) DC PO WER SUPPL Y (5V/1A) GND (PIN 16) SD (PIN 20) RS-232C CABLE PC PO WER CABLE T o A C OUTL[...]

4 - 45 (3) Backup method Information: If it is not possible to back up the data in EEPROM to be replaced because the DVD video camera/recorder is not turned on, etc., replace the MAN-H/MAN circuit board, and then refer to “6-4-1 Initial Data Write”. 1) Choose DATA INITIALIZE on the ADJUST MENU screen. 2) Click the EXECUTE button on ADJUST MENU [...]

4 - 46 (4) Write method Restrictions: Never write data of any other product. The EEPROM data includes adjustment values, etc. that are peculiar to that product: It is different for each product even if the model is the same. If you write the data of another product by mistake, rewrite the correct data. 1) Choose DATA INITIALIZE on the ADJUST MENU s[...]

5 - 1 Disassembly and Reassembly 5 5-1 Items to Be Checked (1) Checking Disc Connect the AC adapter/charger or charged battery, and then press the DISC EJECT button to make sure that no disc is inserted. After check, close the disc insertion block. If the disc insertion block does not open normally, refer to “4-8 Procedure for Removing Disc from [...]

5 - 2 Disassembly and Reassembly > Order of Disassembly Fig. 5-2-1 Reading Disassembly Flowchart: After locating the target component in the flowchart, remove all components of the target in sequence, following the arrows (routes) from the top of flowchart. If multiple routes exist to the target component from the top of flowchart, remove all th[...]

5 - 3 1) 2) (b) (d) (a) (c) (a) 1) (b) 2) 5-3 Disassembly Information: Numbers in disassembly procedure diagrams are step numbers for disassembling order, and letters in brackets [ ] show the types of screw. Letters in brackets ( ) show the name of parts. (a) Adjustment cover (b) LCD monitor (c) Side case-L (d) Flat-bladed screwdriver (a) Hood (b) [...]

5 - 3a 1) Filter Piece Hood Lens cov er 2) [A] 3) [A] M1.7x4 (Black) ( 2a ) Hood, Filter Piece and Lens Cover (DZ-MV1000E) 1) Turn the hood (a) in the direction of the arrow to remove it. 2) Remove three screws [A], and then remove the filter piece (b), being careful not to scratch the lens surface with screwdriver at this time. 3) Remove the lens [...]

5 - 4 (2) (1) (1) Unlock (2) Pull 2) [A] 3) 6) 1) 5) (b) (c) (d) (a) 4) P atter n no , printed side 2) [A] 2) [C] 2) [N] 2) [C] 2) [N] 2) [A] [A] M1.7x4 (Black) [N] M1.7x4 (Silver) [C] M1.7x4 (Silver) (3) SAF-H/SAF Circuit Board and L Block 1) Open the LCD monitor (c). 2) Remove three screws [A], two screws [N] and three screws [C]. 3) Close the LC[...]

5 - 5 (b) (a) (c) (d) 4) 1) [N] 2) [N] 3) (e) 2) [A] [A] M1.7×4 (Black) [N] M1.7×4 (Silver) 1) T abs (b) (a) (d) (c) (b) 3) [D] 2) [D] (a) 1) [D] M1.7 × 4 (Black) (4) Front Block and R Block 1) Open the jack cover (c), and then remove one screw [N]. 2) Remove one screw [A] and one screw [N]. 3) Remove the FRT-H/FRT circuit board (d) from AEL-H/A[...]

5 - 6 (a) (b) (a) (e) (d) (f) (c) 2) [D] 1) [D] M1.7x4 (Black) (7) SWL3-H/SWL3 Circuit Board 1) Unplug the connector. Be sure to hold the connector using tweezers, etc. when unplugging it. Pulling the cable when unplugging the connector could cause wire disconnection. 2) Remove one screw [D]. Procedure and caution for reassembly 1) Insert the switc[...]

5 - 7 (1) Unlock (2) Pull 3) [E] 2) [D] 2) [D] (a) (e) (b) (d) 1) 5) [D] (c) (f) (1) (1) (2) 4) [E] M2x5 (Silver) [D] M1.7x4 (Black) Fig. 5-3-9 (8) Side Case-L, LCD Unit, and SWL2 Circuit Board 1) Unplug the connector. Be sure to hold the connector using tweezers, etc. when unplugging it. Pulling the cable when unplugging the connector could cause [...]

5 - 8 90 90 (1) Unlock (2) Pull (1) Unlock (2) Pull 4) T abs 3) [B] 3) [B] 8) 6) 4) 5) (e) (c) (c) (b) (d) (a) (f) 2) 7) (1) (1) (2) (2) (1) 4) T abs 4) T abs 1) [B] M1.7x4 (Silver) (9) LCD Case-U, MR Circuit Board, and Fulcrum Block LCD Case-U (a) 1) Insert an awl (e), etc. into the screw hole, and turn the screw-hole bracket of fulcrum block 90°[...]

5 - 9 2 6) 4) (g) 5) [F] 5) [F] 1 SW8062 Correct Installing and inclined disc c o v er could damage the s witch (SW8062) in side the disc c o v e r . Incorrect Incorrect (i) (h) (a) (k) (a) (m) (n) (i) (j) (f) (h) Disc cov er [F] M1.6x2.5 (Black) 2) (1) Unlock (2)Pull (1) (1) (2) 3) 1) (b) (d) (c) (e) (f) (a) (c) (10) Disc Cover 1) Remove the space[...]

5 - 10 2) (b) 4) 8) [A] 8) [M] 5) [F] 5) [A] 1) [F] 7) [A] 3) 6) 6) 8) [D] (e) (f) (g) (a) (d) (c) (h) [A] M1.7x4 (Black) [D] M1.7x4 (Black) [F] M1.6x2.5 (Black) [M] M1.7x3 (Black) (11) USB Holder, USB-H/USB Circuit Board, Rear Cover, EVF Unit, and Hand Strap Note: Before replacing the EVF unit, always perform “(1) BL DET Check” in “6-4-11 EV[...]

5 - 11 4) 3) [G] 1) (a) 2) (d) 3) [H] (b) (c) [H] M1.6x2 (Gold) [G] M1.7x3 (Gold) 2) (c) 1) (a) 3) [G] (b) [G] M1.7x3 (Gold) 1) [H] (a) [H] M1.6x2 (Gold) (1 2 ) SHE-H Circuit Board and Accessory Shoe in DZ-MV580E 1) Disconnect the SHE-H circuit board (a) from AEL-H circuit board (c). 2) Disconnect the GYR-H (d) circuit board from SHE-H circuit boar[...]

5 - 12 (1) Unlock (2) Pull DZ-MV580E DZ-MV550E 3) [G] 4) 5) 2) (c) e e 1) (1) (2) 3) [G] 3) [G] (d) (b) (a) (b) [G] M1.7x3 (Gold) IC2006 IC4002 IC4106 IC2010 IC2009 IC2010 (1 5) AEL-H/AEL and MAN-H/MAN Circuit Boards Note: Before replacing the MAN-H/MAN circuit board, always perform “4-9-2 EEPROM data backup and write”. 1) Disconnect the two fl[...]

5 - 13 1) [F] 1) [F] DZ-MV550E DZ-MV580E 1) [F] 1) [F] (d) (b) (c) (a) (a) [F] M1.6x2.5 (Black) 1) [H] (a) [H] M1.6x2 (Gold) (1 6 ) Camera Block 1) Remove two screws [F], and then remove the camera block (a). Procedure and caution for reassembly Fit the hook (c) of camera frame onto the square hole (d) in frame before tightening the screws. Note: T[...]

5 - 14 1) [F] 1) [F] 1) [A] (b) (a) 1) [F] 1) [F] [A] M1.7x4 (Black) [F] M1.6x2.5 (Black) 1) [F] 1) [A] Fig. 5-3-20 Left side (18) Drive Block and Side Case-R 1) Remove five screws [F] and two screws [A], and then remove the drive block (a) from the side case-R (b). Note: Take great care when handling the drive block: The drive block contains the d[...]

5 - 15 (1) Unlock (2) Pull 1) [J] 2) [K] 2) [K] 5) [H] (a) (c) (d) (e) (f) 4) (b) (1) (1) (2) 3) [H] M1.6x2 (Gold) [J] M1.7x3 (Black) [K] M1.7x1.8 (Gold) (1 9 ) Loader, DRF-H/DRF Circuit Board, Disc Drive Unit, Lock Unit, and Frame Loader (a) 1) Remove two screws [L], and then remove the loader. DRF-H/DRF Circuit Board (b) and Disc Drive Unit (c) 2[...]

5 - 16 1) [P] (a) (c) (b) [P] M1.6x3 (Black) (1) Unlock (2) Pull (1) (1) (2) 1) 2) 3) T abs (a) (c) (b) (c) (h) (g) (f) (e) (d) A B C A > B > C Silver surf ace White surf ace (2 0) Fulcrum Cover-U, Fulcrum Cover-B and Fulcrum Unit 1) Remove two screws [P], and then remove the fulcrum cover-U (a) and fulcrum cover-B (b) from the fulcrum unit ([...]

5 - 17 4) 1) [D] 5) [L] 2) [D] 3) T abs 6) Color (c) (c) (a) (h) (h) (b) (e) (d) (f) (g) (b) T ransparent a > b b a [L] M1.7x5 (Silver) [D] M1.7x4 (Black) (2 2 ) GYR-H Circuit Board, Lens Frame, Lens Unit, Cushion, Crystal Filter, CCD Image Sensor, and SEN-H Circuit Board in DZ-MV580E GYR-H Circuit Board (a) 1) Remove two screws [D], and then re[...]

5 - 18 1) [D] 2) [D] (b) (a) (c) [D] M1.7x4 (Black) (23) GYR Circuit Board, Lens Frame, and Lens Unit in DZ-MV550E Information: The DZ-MV550E lens unit is set as a service component: It includes the parts equivalent to cushion rubber, crystal filter, CCD image sensor and SEN-H circuit board of DZ- MV580E. GYR Circuit Board (a) 1) Remove two screws [...]

6 - 1 Adjustment 6 6 -1 Creating Reference Data The reference data is necessary for adjustment: The adjustment program will not operate normally without it. Before adjustment, be sure to create the reference data, using the same model (with normal camera block) as the one to be adjusted. See section 6-1-1 and subsequent sections for details. Inform[...]

6 - 2 6-1-1 List of Jigs and Tools used when Creating Reference Data NEW Adjustment floppy disk Note: Create the data using the adjustment data downloaded from Intranet. If downloading is not possible, obtain the floppy disk with Parts No. TP13875 Personal computer (PC) All of the following OS must operate normally on it. (*1) OS: Windows 95/98/98 [...]

6 - 3 6 - 1- 2 Power Supply and Materials for Creating Reference Data 1) DVD video camera/recorder that is the same model as the one to be adjusted and whose camera block is operating normally. Note: It is recommended that you use a brand-new unit of the same model when creating the reference data. If such a unit is not available, use the same mode[...]

6 - 4 WHT RD (PIN 18) YEL BLK BLK RED RS-232C CABLE DSP-R JIG PC DZ-A CS1 REMO VE THE ADJUSTMENT CO VER [Ref er to "(1) Adjustment cover" in "5-3 Disassembly".] PO WER CABLE T o A C OUTLET DC P ower CORD DC PO WER SUPPL Y (5V/1A) GND (PIN 16) SD (PIN 20) LIGHT BO X FRONT SECTION 30-50cm TRIPOD YEL To VIDEO IN COLOR MONIT OR SKYL[...]

6 - 5 6 -1 - 4 Settings when Creating Reference Data When the connections for creating reference data are complete, set the DVD video camera/recorder and test equipment as follows: 1) Make sure that no disc or card is inserted: Neither is necessary when creating reference data. 2) Set the power switch to “VIDEO” and quick mode switch to “OFF?[...]

6 - 6 6 - 1- 5 Copying or Deleting Adjustment Program Information: The adjustment program also includes a program for creating reference data. (1) Copy 1) Start the PC. 2) Start Explorer and create a new folder in HDD of PC. The name “map04w” is recommended for the folder: If a folder with the same name exists, give the folder a similar name th[...]

6 - 7 4) Choose the communication port to which the RS-232C cable is connected, and then choose the radio button of corresponding port on COMMUNICATION PORT SETTING screen. 5) Click the OK button on the COMMUNICATION PORT SETTING screen, and then proceed with the MODEL SELECT screen. Note: If the following dialogs appear, perform the troubleshootin[...]

6 - 8 6) Refer to the following table and choose the radio button of corresponding model name in MODEL SELECT screen. MODEL SELECT screen. MANUAL ADJUSTMENT PR OGRAM for SERVICE ST A TION MODEL SELECT × × × × × × × × ENTER EXIT CONNECTION × × × × × × × × 6 7 SETUP MENU screen. MANUAL ADJUSTMENT PR OGRAM for SERVICE ST A TION Matrix [...]

6 - 9 (2) Termination 1) Click the RETURN button on MENU screen of program to return to the MODEL SELECT screen. 2) Click the EXIT button on the MODEL SELECT screen. Information: If the PC does not accept any operation during work, or the reference data creating program does not work, perform the following procedure: 1) Set the power switch of refe[...]

6 - 10 6 -1 - 7 Creating Reference Data Start the setup program referring to “6-1-6 Starting and Terminating Reference Data Creation Program”. For subsequent operation, operate the PC mouse while watching the PC monitor screen. Information: It takes approx. 20 minutes to create reference data. The following shows the times required for each ite[...]

6 - 11 8) Choose WHITE BALANCE ABS on the SETUP MENU screen. 9) Repeat steps 2)-5). 10) Click the RETURN button on SETUP MENU screen. 11) The ALL SETUP FINISH dialog will appear: Click the OK button to complete the creation of reference data. Note: Neither Matrix, White Balance nor White Balance Abs in SETUP MENU can be executed independently. Be s[...]

6 - 12 6-2 Setups for Adjustment 6-2-1 Checking Reference Data Before starting adjustment, check whether it will be necessary to create the reference data or not, referring to the flowchart below: Fig. 6-2-1 Hav e you e ver perf or med adjustment of this model? Will you use the same PC as for past adjustment? Will you use the same light box as f or[...]

6 - 13 6-2-3 Test Equipment, Power Supply and Charts for Adjustment 1) Color bar chart 2) 3100 K light box (maintenance is necessary) 3) Backfocus chart 4) Color monitor (color TV with AV input jacks) 5) Oscilloscope 6) Vectorscope 7) Digital voltmeter 8) Frequency counter 9) DC power supply for DSP-R jig (5 V/1 A) Information: It is recommended th[...]

6 - 14 Fig. 6-2-4 Connections for Adjustment DSP-R JIG CH1 CH2 WHT RD (PIN 18) YEL BLK BLK RED PC DZ-ACS1 GND (PIN 16) SD (PIN 20) 30-50cm LCD-HDD (PIN 9) FREQUENCY COUNTER VECT OR SCOPE OSCILLOSCOPE Nothing VECTOR SCOPE REMO VE THE ADJUSTMENT CO VER [Refer to "(1) Adjustment co ver" in "5-3 Disassembly".] LIGHT BO X TRIPOD DC P[...]

6 - 15 Item Program AE White Balance EIS Dig. Zoom MIC Filter 16:9 VIDEO Mode Quality Input Source (*1) PHOTO Input (*1) Self Timer OSD Output Setting Auto Auto On ×40 Off Off FINE FINE CAMERA Field Off Off Item Brightness Color Level Beep Power Save Record LED Language Demo Mode Setting On Off On English Off Camera Functions Setup Recording Funct[...]

6 - 16 (2) Setting test equipment The names of switches, etc. of test equipment may vary depending on the manufacturer and model. Some switches in addition to those shown below may have to be set: See the instruction manual of test equipment for details. 1) Oscilloscope a) Probe: 10:1 b) TIME/DIV: 10 or 20 µs (except where some other designation i[...]

6 - 17 6-2-6 Starting and Terminating Adjustment Program Make sure that the connections are correct, the power switch on DVD video camera/recorder is set to “VIDEO”, and the DC power supply for DSP-R jig is turned on. The adjustment program will not start unless the connections for adjustment are correct, and the DVD video camera/recorder or DS[...]

6 - 18 Information: When communications between the PC and DVD video camera/recorder are normal during adjustment, the word “CONNECTION” in status bar (bottom left) of each screen will flash. 6) Choose the radio button of corresponding model name in MODEL SELECT screen. MANUAL ADJUSTMENT PR OGRAM for SERVICE ST A TION MODEL SELECT × × × × ?[...]

6 - 19 (2) Termination 1) Click the RETURN button on MENU screen of adjustment program to return to the MODEL SELECT screen. 2) Click the EXIT button on the MODEL SELECT screen. Information: If the PC does not accept any operation during work, or the reference data creating program does not work, perform the following procedure: 1) Set the power sw[...]

6 - 20 6-3 List of Adjustment Items 6-3-1 Adjustment Program Hierarchy Diagram MANUAL ADJUSTMENT PROGRAM for SER VICE ST ATION MODEL NAME: × × × × DA TA INITIALIZE EXECUTE RETURN CONNECTION ADJUST MENU SAMPLING PULSE AUT O IRIS CONTROL MA TRIX CHROMA GAIN AUT O FUCUS SPOT NOISE LCD EVF VIDEO LEVEL BURST LEVEL MANUAL ADJUSTMENT PROGRAM for SER V[...]

6 - 21 6-3-2 List of Adjustments Needed After Replacing Major Components Item Initial Data Write Video Level Burst Level Sampling Pulse Autofocus Auto Iris Control Matrix Chroma Gain Spot Noise LCD PLL LCD Contrast-1 (*4) LCD Bright (*4) LCD Contrast-2 (*4) LCD White Balance EVF BL DET Check EVF PLL EVF Contrast EVF Bright EVF White Balance MAN-H/M[...]

6 - 22 Lens unit [For DZ- MV550E] IC3701 IC1301 IC1302 IC6103 IC1001 [For DZ- MV580E] Lens unit [For DZ- MV580E] Adjustment > List of Adjustment Items Item Initial Data Write Video Level Burst Level Sampling Pulse Autofocus Auto Iris Control Matrix Chroma Gain Spot Noise LCD PLL LCD Contrast-1 (*4) LCD Bright (*4) LCD Contrast-2 (*4) LCD White B[...]

6 - 23 Purpose To write initial data to EEPROM in which adjustment data has been stored To set the video output level. To set the burst level. To measure the delay time in sampling IC, and optimize pulse timing. To set out-of-focus correction level during zoom. To set iris control data. To compensate for unevenness in the chroma signal and input au[...]

6 - 24 6-4 Adjustment Procedure Start the adjustment program referring to “6-2-6 Starting and Terminating Adjustment Program”. For the subsequent operation, operate the PC mouse while watching the PC monitor screen. Information: 1) Display ×××× on subsequent PC screen shows the model name. 2) The numbers on PC screens show the operational p[...]

6 - 25 6-4-2 Video Level Preparations: 1) Connect the oscilloscope CH1 to video out. 2) Switch the oscilloscope V-MODE to “CH1” and TRIGGER SOURCE to “CH1”. Procedure: 1) Choose VIDEO LEVEL on the ADJUST MENU screen. 2) Click the EXECUTE button on ADJUST MENU screen to proceed with the VIDEO LEVEL ADJUSTMENT screen. 3) Click the UP or DOWN [...]

6 - 26 Adjustment > Adjustment Procedure 6-4-3 Burst Level Preparations: 1) Connect the oscilloscope CH1 to video out. 2) Switch the oscilloscope V-MODE to “CH1” and TRIGGER SOURCE to “CH1”. Procedure: 1) Choose BURST LEVEL on the ADJUST MENU screen. 2) Click the EXECUTE button on ADJUST MENU screen to proceed with the BURST LEVEL ADJUST[...]

6 - 27 ADJUST MENU screen MANUAL ADJUSTMENT PR OGRAM for SERVICE ST A TION MODEL NAME: ×××× DA T A INITIALIZE EXECUTE RETURN CONNECTION ADJUST MENU SAMPLING PULSE A UTO IRIS CONTROL MA TRIX CHROMA GAIN A UTO FUCUS SPOT NOISE LCD EVF VIDEO LEVEL BURST LEVEL 2 1 6-4-4 Sampling Pulse Note: Start this adjustment after the circuit operation is stabi[...]

6 - 28 Adjustment > Adjustment Procedure 6-4-5 Autofocus Preparations: 1) Use the backfocus chart vertically (portrait mode) as shown in Fig. 6-4-3. 2) Point at backfocus chart 1500mm ± 5 mm away from the lens surface: Measure the distance precisely. 3) Set the zoom to telephoto end, and make sure that the center of backfocus chart appears. 4) [...]

6 - 29 6-4-6 Auto Iris Control Preparation: Set zoom to wide-angle end, and point at light box without chart, filling the screen. Procedure: 1) Choose AUTO IRIS CONTROL on the ADJUST MENU screen. 2) Click the EXECUTE button on ADJUST MENU screen to start adjustment. The progress status can be confirmed using the PROGRESS STATUS dialog. 3) When adju[...]

6 - 30 Adjustment > Adjustment Procedure 6-4-7 Matrix Preparation: 1) Point at light box without chart, filling the screen. 2) Prepare the C12 light balancing filter (step-up rings): Attach it during adjustment. Procedure: 1) Choose MATRIX on the ADJUST MENU screen. 2) Click the EXECUTE button on ADJUST MENU screen to start adjustment. The progr[...]

6 - 31 Fig. 6-4-4 White balance set screen Set EXIT 6-4-8 Chroma Gain Preparation: 1) Point at light box without chart, filling the screen. 2) Prepare the color bar chart: Use it during adjustment. Procedure: 1) Press the MENU button on DVD video camera/recorder, and use the joystick to specify “White Bal.: Set” to display the white balance scr[...]

6 - 32 When using an oscilloscope B = 850mV ± 20 mVp-p B = 780mV ± 20 mVp-p When using a vectorscope A = 310 % ± 5 % A = 280 % ± 5 % Table 6-4-1 Value of Red Level/Vector Fig. 6-4-5 When using a vectorscope Fig. 6-4-6 When using an oscilloscope Adjustment > Adjustment Procedure 7) Click the GAIN UP or GAIN DOWN button in ROUGH ADJUSTMENT box[...]

6 - 33 Adjustment > Adjustment Procedure 6-4-9 Spot Noise Information: 1) The SPOT NOISE adjustment compensates for bright points that appear on the screen, and these are caused by a defect in pixel of CCD image sensor that may occur when DVD video camera/ recorder is used under particular conditions or for a long time. Therefore, execute SPOT N[...]

6 - 34 6-4-10 LCD Note: 1) Perform LCD only after replacing the MAN-H/MAN circuit board, LCD circuit board or LCD unit, or executing “Initial Data Write”. 2) Neither light box nor chart is needed for LCD adjustment. Before performing any adjustments for LCD, be sure to shift the DVD video camera/recorder to the test mode using the procedure bel[...]

6 - 35 (1) LCD PLL Preparation: Connect the frequency counter to “LCD-HDD (pin 9)” of Skylark Connection jig. Procedure: 1) Choose PLL on the LCD ADJUSTMENT MENU screen. 2) Click the EXECUTE button on LCD ADJUSTMENT MENU screen to proceed with the PLL ADJUSTMENT screen. Synchronization of the video on LCD monitor screen will be off at this time[...]

6 - 36 Adjustment > Adjustment Procedure (2) LCD Contrast-1 Note: Be sure to adjust LCD brightness and LCD contrast-2 after completing LCD contrast-1 adjustment. Preparations: 1) Connect the oscilloscope CH2 to “LCD-G (pin 5)” of Skylark Connection jig. 2) Switch the oscilloscope V-MODE to “CH2”: Leave the TRRIGER SOURCE in “CH1” as [...]

6 - 37 (3) LCD Brightness Note: 1) Be sure to adjust LCD contrast-1 before performing LCD brightness adjustment. 2) Be sure to adjust LCD contrast-2 after completing LCD brightness adjustment. Preparations: 1) Connect the oscilloscope CH2 to “LCD-G (pin 5)” of Skylark Connection jig. 2) Switch the oscilloscope V-MODE to “CH2”: Leave the TRR[...]

6 - 38 Adjustment > Adjustment Procedure (4) LCD Contrast-2 Caution: Be sure to adjust LCD contrast-1 and LCD brightness before performing LCD contrast-2 adjustment. Preparations: 1) Connect the oscilloscope CH2 to “LCD-G (pin 5)” of Skylark Connection jig. 2) Switch the oscilloscope V-MODE to “CH2”: Leave the TRRIGER SOURCE in “CH1”[...]

6 - 39 Adjustment > Adjustment Procedure (5) LCD White Balance Preparations: 1) Connect the oscilloscope CH1 to “LCD-R (pin 3)” of Skylark Connection jig. 2) Connect the oscilloscope CH2 to “LCD-G (pin 5)” of Skylark Connection jig. 3) Connect the oscilloscope EXT TRIG to video output. 4) Switch the oscilloscope V-MODE to “ALT” and T[...]

6 - 40 Adjustment > Adjustment Procedure 7) Connect the oscilloscope CH1 to “LCD-B (pin 7)” of Skylark Connection jig. 8) Use the same procedure as in step 3) to equalize levels a and b of the waveform. (See Fig. 6-4-11) 9) After step 8) is complete, be sure to click the NEXT button, and then proceed with the SUB BRIGHT BLUE ADJUSTMENT scree[...]

6 - 41 6-4-11 EVF Note: 1) Perform EVF only after replacing IC3701 and its peripheral components, MAN-H/MAN circuit board or EVF unit, or executing “Initial Data Write”. 2) Neither light box nor chart is needed for EVF adjustment. Before performing any adjustments for EVF, be sure to shift the DVD video camera/recorder to the test mode using th[...]

6 - 42 Adjustment > Adjustment Procedure (1) EVF BL DET Check Note: Be sure to take note of the resulting value of this check because the check value will be needed when EVF adjustment is completed. There are two types of EVF unit mounted in these DZ-MV580E/MV550E: The backlight characteristics of the two types are different. This check item ide[...]

6 - 43 (3) EVF Contrast Preparations: 1) Confirm the CH1 connection to video out. 2) Connect the oscilloscope CH2 to “EVF-G (pin 4)” of Skylark Connection jig. 3) Switch the oscilloscope V-MODE to “CH2”: Leave the TRIGGER SOURCE in “CH1” as is. Procedure: 1) Choose CONTRAST on the EVF ADJUSTMENT MENU screen. 2) Click the EXECUTE button [...]

6 - 44 (4) EVF Brightness Preparations: 1) Connect the oscilloscope CH1 to video output. 2) Connect the oscilloscope CH2 to “EVF-G (pin 4)” of Skylark Connection jig. 3) Switch the oscilloscope V-MODE to “CH2” and TRIGGER SOURCE to “CH1”. Procedure: 1) Choose BRIGHT on the EVF ADJUSTMENT MENU screen. 2) Click the EXECUTE button on EVF A[...]

6 - 45 (5) EVF White Balance Preparations: 1) Connect the oscilloscope CH1 to “EVF-R (pin 2)” of Skylark Connection jig. 2) Connect the oscilloscope CH2 to “EVF-G (pin 4)” of Skylark Connection jig. 3) Connect the oscilloscope EXT TRIG to video output. 4) Switch the oscilloscope V-MODE to “ALT” and TRIGGER SOURCE to “EXT”. 5) Set th[...]

6 - 46 7) Connect the oscilloscope CH1 to “EVF-B (pin 6)” of Skylark Connection jig. 8) Use the same procedure as in step 3) to equalize levels a and b of the waveform. 9) After step 8) is complete, be sure to click the NEXT button, and then proceed with the SUB BRIGHT BLUE ADJUSTMENT screen. 10) Use the same procedure as in step 3) to equalize[...]

2A 3A 4A 1A 2B 3B 4B 1B 2C 3C 4C 1C 2D 3D 4D 1D 2E 3E 4E 1E 2F 3F 4F 1F 4 3 2 1 A B C D E F A B C D E F 4 3 2 1 7 - 1 7-1 Exploded Views 7-1-1 L Block and Front Block Exploded View and Parts List 7 Note: Components without any numbers in exploded views had not been assigned as service parts as of the date of issue of this manual. FRT -H/FR T CIRCUI[...]

7 - 1a Note: Components without any numbers in exploded views had not been assigned as service parts as of the date of issue of this manual. 111 112 108 905 109 905 910 910 113 909 909 110 FRT CIRCUIT BO ARD [Component Replacement] SWL3 CIRCUIT BOARD [Component Replacement] 126 909 909 909 909 909 910 910 114 9 127 905 a a 907 909 909 SWL2 CIRCUIT [...]

2A 3A 4A 1A 2B 3B 4B 1B 2C 3C 4C 1C 2D 3D 4D 1D 2E 3E 4E 1E 2F 3F 4F 1F 4 3 2 1 A B C D E F A B C D E F 4 3 2 1 7 - 2 7-1-2 R Block - (DZ-MV550E, DZ-MV580E) DZ-MV550E DZ-MV580E DZ-MV550E DZ-MV580E DZ-MV550E DZ-MV580E 123 124 905 904 905 106 106 105 11 8 91 1 91 1 91 1 912 912 901 901 905 905 11 9 904 904 904 904 120 904 904 904 904 904 121 906 11 7[...]

7 - 2a 123 124 905 904 905 920 106 105 118 911 911 911 912 912 901 905 905 119 904 904 904 904 120 920 920 904 904 920 121 117 116 103 101 102 107 904 901 901 901 DRF CIRCUIT BOARD [Component Replacement] 009 MAN CIRCUIT BOARD [Assembly Replacement] 011 DISC DRIVE UNIT [Unit Replacement] 909 905 1 4 3 144 d d USB CIRCUIT BOARD [Component Replacemen[...]

2A 3A 4A 1A 2B 3B 4B 1B 2C 3C 4C 1C 2D 3D 4D 1D 2E 3E 4E 1E 2F 3F 4F 1F 4 3 2 1 A B C D E F A B C D E F 4 3 2 1 7 - 3 7-1-3 LCD Unit 7-1-4 DZ-MV580E Camera Block 7-1-5 DZ-MV550E , DZ-MV1000E(UK) Camera Block 917 917 915 141 142 132 135 133 139 125 LCD CIRCUIT BOARD [Component Replacement] MR CIRCUIT BOARD [Component Replacement] 913 909 909 603 604[...]

7 - 4 P-NO DESCRIP- TION SYMBOL NO P-NO DESCRIP- TION SYMBOL NO 91 5 S CR E W ( 1 . 6 X 3 ) 91 7 S CR E W ( 1 . 7 X 4 ) A CCESSORIES FOR DZ-MV580E ADP T OR , A C C O R D , P O W E R [ M V 580E/MV580E(SW)] COR D ,P O W ER( A U) [MV580E( A U )] C O R D , P O W E R [ M V580E(SWH)/MV580E(UK)] C O R D , A V S COR D , D C RE M O T E HAND SET(DZ-RM3WF) CO[...]

7 - 5 P-NO DESCRIP- TION SYMBOL NO P-NO DESCRIP- TION SYMBOL NO MV550E(SWH)/MV550E(UK)] 14 9 PL A T E , US B 15 1 SHEE T ,S P A CE 60 1 L ENS ASSY 90 1 SCREW(M1.7X3S) 90 4 SCREW(1.6X2.5) 90 5 S CR E W ( 1 . 7X4) 90 6 S CR E W ( 1 . 6X2) 90 7 S CR E W ( 1 . 7X4) 90 9 SCREW(1.7X4) 91 0 S CR E W ( 1 . 7X4) 91 1 SCREW(M1.7W) 91 2 S CR E W ( M 1 . 7 ) 9[...]

THE UPDATED PARTS LI ST FOR THIS MODEL IS AVAILABLE ON ESTA[...]

4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 B - 1 B Block Diagrams B-1 Video/Audio Signal Process  F_DET FOCUS LED FOCUS SENS ZOOM SENS SDO, SCLK, CS_LENS CS_LENS ACCESSLE, PC-LED DOORSW SD, MOVIE, STILL SELECT LCD_REV LCD_OPEN SHOE_SCLK, SHOE_SDA T A, SHOE_DET V_GYRO H_GYRO V_GYRO H_GYRO SHOE_SCLK, SHOE_SDA T A, SHOE_DET REM_IN WB_I[...]

4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 B - 2 B-2 Disc Drive SPINDLE MOTOR AF TR LASER DIODE LASER DIODE DRIVE 8 DETECTOR & AMP FRONT MONITOR DET. & AMP Encord Data APC SLIDER MOTOR DATA STROBE ANALOG FRONT END DRIVE DSP (SERVO/DSP/ ATAPI/ ENCODER/ DECODER) 4CH BRIDGE DRIVE SDRAM µ P SRAM FLASH ROM SPINDLE DRIVE EJECT MOTOR[...]

4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 B - 3 B-3 Power-1 0 ohm 0 ohm FOCUS MOTOR/ ZOOM MOTOR/ IRIS MOTOR FOCUS MOTOR/ ZOOM MOTOR/ IRIS MOTOR 23 PG0501 1-5 8-12 F0501 REAR COVER DISC COVER LENS UNIT BA TTERY TERMINAL ZOOM LEVER/ RECORD BUTTON/ DISC EJECT POWER/ DOOR SW & CARD INSERTION BLOCK F0502 F0503 F0504 1.6V REG 3V REG 5V [...]

4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 B - 4 B-4 Power-2 25, 26 PG9701 30-33, 38-41 IC8501 30 IC9302 1, 3, 14, 16, 17, 32 IC9304 15, 16 IC9305 8 IC9306 8 IC9602 IC9603 6, 8 IC9605 5 IC9610 8 PG9301 3, 4 7, 22, 23 IC9301 11, 12 41 PG9702 5, 6 25, 26 28, 43 PG2302 30-33, 38-41 IC9501 IC9101 57 11, 23, 50, 73, 82 28, 43 IC9502 IC9506 [...]

C - 1 C Circuit Board Diagrams C-1 GYR-H C-2 GYR GYR -SIDE A- PG1401 GYR -SIDE B- [P A TTERN No .JD1175-3] GYR-H -SIDE A- PG1401 GYR-H -SIDE B- [P A TTERN No .JD1176-5][...]

C - 2 C-3 FRT-H C-4 FRT FR T -H -SIDE A- FR T -H -SIDE B- [P A TTERN No .JD1176-5] PD1801 FR T -SIDE A- FR T -SIDE B- [P A TTERN No .JD1175-3] PD1801[...]

C - 3 C-5 DRF-H/DRF C-6 SHE DRF -SIDE A- 70 1 36 35 DRF -SIDE B- [P A TTERN No .JD1175-3] 1 35 70 36 DRF-H -SIDE A- 36 DRF-H -SIDE B- [P A TTERN No .JD1176-5] 36 SHE -SIDE A- 12 0 40 21 SHE -SIDE B- [P A TTERN No .JD1175-3] BA1801[...]

C - 4 C-7 SHE-H C-8 SWL3-H/SWL3/SWL2 SHE-H -SIDE A- CN0152 SHE-H -SIDE B- [P A TTERN No .JD1176-5] BA1801 C0153 SWL3-H -SIDE A- SWL3-H -SIDE B- [P A TTERN No .JD1176-5] SWL3 -SIDE A- SWL3 -SIDE B- [P A TTERN No .JD1175-3] SWL2 -SIDE B- [P A TTERN No .JA2255-1] SWL2 -SIDE A-[...]

C - 5 C-9 USB-H/USB C-10 MR USB-H -SIDE A- CN8101 USB-H -SIDE B- [P A TTERN No.JD1176-5] USB -SIDE A- 1 5 CN8101 USB -SIDE B- [P A TTERN No.JD1175-3] MR [P A TTERN No.JD1183-2] CN3401[...]

C - 6 C -11 L C D TL3418 LCD -SIDE A- A B C A B C 1 2 3 4 1 2 3 4 4 C 4B 4A A 4 3C 3C 3C 3C 3B 3 3A A 3 3 3 A 3 3 2C 2C 2C 2C 2C 2C 2B B B B B B 2 2 2B B B 2B 2 2 2 2 2 2 2 2 2 2 2 2 B B B 2A 2 A 2 2 2 2 2 2 2 2 A A 2 2A C 1C C B 1B B 1 B B B 1 B B B 1 A LCD -SIDE B- [P A TTERN No .JA2244-4] A B C A B C 12 3 4 12 3 4 1C 1C 1 1C 1B 1 1 B B 1B B B 1B[...]

C - 7 C-12 SEN-H C-13 SAF-H/SAF SEN-H -SIDE A- 14 8 1 IC1001 7 PG1002 SEN-H -SIDE B- [P A TTERN No .JD1176-5] SAF-H -SIDE A- CN7004 CN8012 SAF-H -SIDE B- [P A TTERN No .JD1176-5] SAF -SIDE A- CN7004 CN8012 SAF -SIDE B- [P A TTERN No .JD1175-3][...]

C - 8 C -14 AEL-H/AEL A B C D E F G H A B C D E F G H 1 2 3 4 1 2 3 4 4 H 3 H 2H 1H H H H H H 1H 1H 1 H H 1 1 4 G 3G G 3G 3G 3G 3 G 3 3 2G 1G 1 G 1 G G 1G G G G G G G 4F F F 4 4 4 3F F 3 3F 3F F F F 3 3 3 F 3 3 3 F F 3 2F F F F F 2 2 F F F F F 1F 1 1 1 1 4E 4E E E E E E 3E 3 E E E 3 3 3 3 E E E E E 3 3 3E E E E 2E 2 2E E 2 E E E E E E E 2 E E 2 E E[...]

C - 9 C-15 MAN-H/MAN -7.9 3.1 3.1 3.1 -7.0 -7.9 3.2 -7.0 3.2 3.0 3.1 3.1 8.0 MV580E : 15.0 MV550E: 12.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 7.9 7.9 7.9 7.9 7.9 7.9 7.9 3.1 3.2 2.5 4.8 5.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 5.1 3.4 3.2 3.2 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 7.9 MV550E : 12.0 MV580E : 15.0 MV580E : -7.0 MV550E :[...]

C - 10 C-16 DRV-R C-17 MOD 2.5 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.8 4.8 4.8 4.8 4.8 4.8 4.8 3.3 3.3 3.3 3.3 2.5 4.6 4.6 2.5 3.4 2.1 2.1 4.7 2.5 3.3 4.8 4.8 4.7 2.2 4.8 4.8 2.1 4.8 3.3 4.7 4.7 4.6 4.6 4.7 4.7 3.3 4.7 4.7 4.7 4.7 3.4 3.4 3.4 3.3 3.3 4.7 4.8 4.8 4.8 4.7 3.3 4.7 4.7 4.7 4.7 DRV -R -SIDE A- 81 85 89 11 12 20 42 46 41 43 47 27 57 12 5 3 0 70 [...]

C - 11 C-18 HDM 14 (4.8) 1 (4.8) 3 (3.1) 8 (4.9) 5(4.9) 9(4.9) 41(4.8) 11 ( 3 . 1 ) 6(4.9) 10(4.9) 40(4.8) 17 (4.9) 20 (4.9) 21 (4.9 25 (4.9) ) 27 (3.1) 19 25 17 10 16 32 26 HDM -SIDE A- HDM -SIDE B- Note: V o ltage values are in reading status. Example: 24 (4.7): T erminal no. (voltage value) Supplement: Since the DVD disc drive is intermittently [...]

4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 1 S Schematic & Wiring Diagrams S-1 DZ-MV580E Wiring Diagram CN3401 MICROPHONE LCD P ANEL LOCK UNIT LENS UNIT SLID M OTO R DISC DRIVE UNIT SPINDLE M OTO R EVF UNIT SIDE CASE-L (OPERA TION SWITCH) To ACCESSOR Y SHOE BA TTER Y TERMINAL REAR CO VER ZOOM/DISC EJECT/ REC BUTT ON FOR ADJUSTM[...]

4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 2 S-2 DZ-MV550E Wiring Diagram CN3401 6PIN 6PIN 6PIN 6PIN 6PIN 40PIN 22PIN 10PIN 6PIN 25PIN 24PIN 120PIN 70PIN 70PIN 25PIN 51PIN 51PIN 6PIN 15PIN 20PIN 4PIN 12PIN 8PIN 16PIN 22PIN PG1801 PG7003 PG7008 PG3401 PG3402 PG3403 PG7001 PG2001 PG1501 PG9404 PG2301 PG9103 PG9701 PG9702 PG9301 PG940[...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 3 S-3 GYR-H/GYR S-4 FRT-H/FRT 1.3 03 . 1 1.3 1.3 03 . 1 1.3 1.3 1.3 1.3 1.3 0 0 1.3 1.3 1.3 3.1 0 1.3 3.1 0 3.1 0 - 0 3.0 - - - - - 4.8 4.8 0 - 0 [...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 4 S-5 DRF-H/DRF S-6 SWL3-H/SWL3 SWL3-H/SWL3 To SWL2 CN8017 OFF QUICK MODE ON DRF-H/DRF T o MAN-H/MAN PG2002 T o DISC DRIVE UNIT (DR V -R PG9701)[...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 5 S-7 SHE-H S-8 SHE SHE-H To SHOE TERMINAL To EVF UNIT EVF_5V To GYR-H PG1401 T o BTB [AEL-H] PG7009 C0153 0.01 SHE To EVF UNIT EVF_5V To GYR PG14[...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 6 S-9 USB-H/USB S-10 SAF-H/SAF S-11 MR USB-H/USB FLC181Z16SMMZ PC TERMINAL To MAN-H/MAN PG5001 SAF-H/SAF To SWL2 PG8012 To BTB [AEL-H/AEL] PG7004 [...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 7 S-12 LCD 1.3 1.2 1.7 2.8 3.5 3.2 3.5 3.5 3.2 4.8 4.8 4.8 4.1 0.1 1.3 1.5 0.7 1.3 1.5 0.7 1.3 1.5 0.7 1.3 1.5 0.7 1.3 1.5 0.7 1.3 1.5 0.7 0 3.2 2[...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 8 S-13 SEN-H PB: 0 REC: ( 0 -7 15.0 10.5 0 0 -7.0 PB: 10.5 REC: ( 10.5 PB: 12.0 REC: ( 10.0 13.3 0 14.7 9.8 10.5 10.5 7.5 8.2 10.5 0 0 10.0 32.0 P[...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 9 S-14 BTB [AEL-H/AEL] 0 0 0 00 0 0 0 0 3.1 4.6 0 4.6 1.2 2.8 4.8 0 0 3.1 1.1(0) 3.1 7.4 6.8 0 0 0 7.1 1.7 1.7 0 4.8 0 3.3 BTB [AEL-H/AEL] 25 24 2[...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 10 S-15 LENS DRIVE [AEL-H/AEL] 0 MV580E : 3.7 MV550E : 3.1 MV580E : 3.7 MV550E : 3.1 0 0 0 4.8 1.2 8.0 7.4 1.3 3.1 0 0 5.1 5.1 8.0 7.2 0 2.5 (2.5 [...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 11 S-16 AUD [AEL-H/AEL] 2.4 2.4 4.7 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 0 1.4 1.4 1.4 1.4 1.4 1.4 1.4 3.1 3.1 0 3.1 3.1 3.1 3.1 0 0 1.4 0.5 2.[...]

2A 3A 4A 5A 6A 7A 8A 1A 2B 3B 4B 5B 6B 7B 8B 1B 2C 3C 4C 5C 6C 7C 8C 1C 2D 3D 4D 5D 6D 7D 8D 1D 2E 3E 4E 5E 6E 7E 8E 1E 2F 3F 4F 5F 6F 7F 8F 1F 4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 12 S-17 EVF [AEL-H/AEL] 4.3 4.3 3.6 3.1 0 0.1 3.0 3.0 3.2 3.1 3.1 1.4 0 0 0 0 0 0 0 0 0 0 0 0 00 1 . 5 1.5 1.5 4.2 3.0 3.5 2.0 3.0 0 0 0 0 0 3.0 -[...]

2A 3A 4A 1A 2B 3B 4B 1B 2C 3C 4C 1C 2D 3D 4D 1D 2E 3E 4E 1E 2F 3F 4F 1F 4 3 2 1 A B C D E F A B C D E F 4 3 2 1 S - 13 S-18 SWL2 SWL2 To SWL3-H/SWL3 PG8017 To SIDE CASE-L To SAF-H/SAF CN8012 CENTER L UP LOW R JO YSTICK ST OP/EXIT MENU SELECT DISC NA VIGA TION[...]

4 3 2 1 A B C D E F A B C D E F 8 7 6 5 4 3 2 1 8 7 6 5 S - 14 S-19 IC BLOCK 1 2 3 4 5 6 7 8 9 10 11 12 VCOREF FIL TER GND RPD +3V Vcc1 SEN SCK SDA T TEST1 XCLR VD GND 13 RGT HCK1 HCK2 WIDE HST V DD +3V PCG XSTB DWN EN VCK VST GND SYNC IN B/B-Y R/R-Y G/Y Vcc1 +3V REF DA OUT COMREF COM OUT COMDC PSIG OUT 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 [...]

Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 – 12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105 - 8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham R oad Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consume r - service@hi[...]