Honda 00X31-TM8-8000 manual

2010 Insight Navigation Manual (Unlinked) This document does not contain hyperlinks and may be formatted for printing instead of web use. This is due to changes in content and specifications of the vehicle that happen throughout the model year . This manual will be replaced with a hyperlinked version at the end of the model year . © 2009 Honda Mot[...]

Navigation System 1 Table of Contents Introduction ..................................4 Manual Overview ......................... ... 4 System Overview ......................... ... 4 Accessories Precautions .................. 5 Important Safety Information .......... 5 Map Overview ... ........................... ... 6 Current Street ..............[...]

2 Navigation System Table of Contents Landmark Icons ............................ . 56 Showing Icons on the Map............... 58 Icon Options ........ .................... ........ 58 Going Off the Route ...................... 60 Off-road Tracking ................ .......... 60 Viewing/Saving the Current Location ..................................[...]

Navigation System 3 Table of Contents Customer Assistance ................ 103 Reporting Errors .......................... 103 Honda Automobile Customer Service .......................... ............ 103 Visiting Your Dealer ................... 104 Obtaining a Navigation Update DVD ........................ ................. 104 Changing the DVD ..[...]

4 Navigation System Introduction Manual Overview The manual is divided into the following sections: • Getting Started - A basic introduction that discusses the co ntrols and how to communicate with the system . • Entering a Destination - How to enter an address or locate a point of interest (POI). • Driving to Your Destination - An explanatio[...]

Navigation System 5 Introduction The navigation system applies location, direction, and speed information to the maps and calculates a route to the destination you enter. As you drive to that destination, the system provides map and voice guidance. The navigation system is easy to use. The locations of many places of business and entertainment are [...]

6 Navigation System While driving, do not look at the screen or operate the system controls for more than a second or so at a time, and only after deciding you can do so safely. Pull to the side of the road if you need more time to look at the screen or operate the controls. The navigation system is designed to provide route information to help you[...]

Navigation System 7 Introduction Verified streets (dark colored) Un verified streets (light colored) When displayed These roads are found within metropolitan areas, and include interstate fr eeways and major roads connecting cities. These roads are found in rura l areas, and typically include residential streets away fr om the center of a town. Str[...]

8 Navigation System User Agreement In using this DVD “Satellite Linked Navigation System” (the “DVD”), which includes HONDA MOTOR CO., LTD. software, ALPINE ELECTRONICS, INC. software, NAVTEQ database contents, INFO USA CORPORATION database, and ZENRIN CO. database contents (hereinafter referred to as “Licensors”), you are bound by the [...]

Navigation System 9 User Agreement • The terms and conditions hereo f apply to all subsequent users and owners as well as to the original purchaser. • The logos of oil companies, hotels, and convenience stores are displayed for your information and convenience, and in no way imply any sponsorship, approval or endorsement of these companies, or [...]

10 Navigation System Getting Started System Controls Joystick/ENT button MAP/GUIDE button CANCEL button Screen MENU button INFO button AUDIO button OPEN button ZOOM (IN)/ ( OUT) buttons SETUP button OPEN button Tilts the screen down to access the CD, DVD, and PC Card slots. CLOSE button Return the screen to the original position. Pressing the OPEN [...]

Navigation System 11 Getting Started Joystick/ENT button Moves left, right, up, and down to move the highlighting around the display, to scroll through lists, or to look around a displayed map. After making a selection in a menu or list, push in on the joystick to enter the selection into the system. In almost all cases, you can enter a selection i[...]

12 Navigation System Getting Started Voice Control Basics Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions. You can also control the audio and climate control system. The voice control system uses the NAVI TALK and NAVI BACK buttons on the steering wheel and a microphone near the ma[...]

Navigation System 13 Getting Started Using the Voice Control System You should use the vo ice control system as much as possible, and consider manual entry using the joystick as a backup method of entry. Most of the system’s function s can be controlled by voice commands activated with the NAVI TALK button. To control the navigation system by voi[...]

14 Navigation System Getting Started • If more than one person is speaking at the same time, the system may misinterpret your command. • After pressing and releasing the NAVI TALK button, wait for the beep, then give a voice command. • Give a voice command in a clear, natural speaking voice without pausing between words. • If the system can[...]

Navigation System 15 Getting Started Using the On-screen Keyboard When the system needs input from you, the display changes to a keyboard. Use the displayed letters to enter the information. Enter each letter by one of the following methods: • Using the voice control system, say the desired letter on the screen. • Move the highlighting to the d[...]

16 Navigation System Getting Started Each entered letter will appear at the top of the display. Say or select Space to enter a space between words. Say or select Delete to erase a letter entered incorrectly. When entering an address, the system searches the databa se for words that match the letters you are entering. As a result, you will notice th[...]

Navigation System 17 Getting Started Read this disclaimer carefully so you understand it before continuing. Push in on the joystick, or touch OK , and the map screen will appear on the display. The “OK” cannot be activated by voice. NOTE: If you do not select OK , and then enter the Setup or Informatio n screens, some items are not available an[...]

18 Navigation System Getting Started If you select OK , the reminder will not show up again. If you wish to have the reminder show up again later in the day, touch the Remind Later button. If you press the CANCEL button, the message will be displayed the next time you start the vehicle. NOTE: The system will display the current message and any olde[...]

Navigation System 19 Getting Started Map Screen Legend Map Orientation (see page 55) GPS Signal Strength : Best Reception : Good Reception Missing: Poor/No Reception Current Map Scale (see page 54) ICON Button (see page 58) Vehicle Position (see page 61) (Use voice command “Display the current location,” or touch the icon to show current locati[...]

20 Navigation System Getting Started Map Screen Description Zoom In/Out Use the ZOOM buttons to change the scale of the map. Zooming in increases the detail, while zo oming out gives you a wide area v iew. After chan ging the scale, give the system a few moments to update the display. Map Scrolling To view other areas on the map, move the joystick [...]

Navigation System 21 Getting Started System Function Diagram This diagram shows the navig ation system features, starting at the center and working outward in layers. The navigation program starts at “Key ON,” and then displays the globe screen (blue). If OK is selected on the Disclaimer screen, the functions in the yellow segments of the diagr[...]

22 Navigation System When you press the MENU button, the display changes to: Address (see page 23) This selection requires you to enter the city (and possibly the state) and the address that you want to go to. Intersection (see page 27) This selection allows you to enter the names of two intersecting streets in a city. This is useful if you know th[...]

Navigation System 23 By Address After you select Address from the Enter destination by screen, the display changes to: Tip: • When entering an addr ess by voice, it is more efficient to say the city name first, then the street name. • When entering an address by touch, it is usually easier to enter the street first. A city or cities that the st[...]

24 Navigation System To enter the city name by voice spelling, say or select CHANGE TO Spell Mode on the Say city name screen, and the display will change to the Enter city name screen. Say the city name by saying individual letters, or words that represent the letters, one at a time. The system has a talk back func tion. If your spoken letter is n[...]

Navigation System 25 If the system does not find an exact match, select List when you finish entering the name of the city. Most of the cities and towns for that state are listed. Listings of cities and towns in the non- detailed coverage area may have an asterisk “*” next to their names. I f you select one, a pop-up box is displayed saying, ?[...]

26 Navigation System The system has a talk back function. If your spoken letter is not recognized, the system will talk ba ck to you. For example, if you say “E” but the system does not recognize the command, it will ask you, “Please select the number of the input letter from the list,” and the following pop-up box will appear: You should s[...]

Navigation System 27 Entering the Street Number After you have completed the street name, the display changes to the Enter street number screen. Use the voice control system and say the address number as a continuous string of numbers. For example, the address 1527 should be spoken as “One, five, two, seven.” You can also use the on-screen keyb[...]

28 Navigation System NOTE: • If you find that your city is not listed, it may be part of a larger metropolitan area. Try entering the street first. • Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See Edit Avoid Area on page 88. Selecting the State or Provi[...]

Navigation System 29 The system has a talk back function. If your spoken letter is not recognized, the system will talk ba ck to you. For example, if you say “E” but the system does not recognize the command, it will ask you, “Please select the number of the input letter from the list,” and the following pop-up box will appear: You should s[...]

30 Navigation System Selecting the Street By Voice Control: After you have selected the city, or if you say “Street” on the Find intersection by screen, the display changes to the Say street name screen. Say the street name and the searching will begin. To enter the street name by voice spelling, say or select CHANGE TO Spell Mode on the Say st[...]

Navigation System 31 By Touch Control: After you have selected the city, or if you select Street in the beginning, the display changes to the Enter street name screen. Use the on-screen keyboard to enter one of the names (like ELM or 42ND) of the intersecting streets. To enter the name of a major highway, you must use the full name, includ ing a hy[...]

32 Navigation System By Places After you select Places from the Enter destination by screen, the display changes to: There are three ways to find a place or point of interest (POI), by Category , Name , or Phone Number . Let’s assume you want to find a coffee shop (restaurant) called “Bucks.” • If you know the phone number of the coffee sho[...]

Navigation System 33 Auto Service Lodging Shopping Honda Dealers Auto Repair & Maintenance Bed & Break fast Resort All Shopping*2 Office Supplies/Electronics Acura Dealers Car Wash & Detailing Hotel/Motel Accessories/Jewelry Pharmacy/Drug Store Gas Station Motorcycle Dealers Leisure Auto Parts & Electronics Pet Food/Supplies Hydroge[...]

34 Navigation System After selecting a category and subcategory, the system will give you the options of Place Name by Keyword , Sort by Distance to Travel , City Vicinity , or Place Name with the following screen: Place Name by Keyword If you do not know the exact name of the destination, you can find the place with a keyword. When you select this[...]

Navigation System 35 If you select the City Vicinity option, the Enter city name screen appears. Enter the name of th e city using the on- screen keyboard. The system will display a list of city names, with the closest match to the name you entered at the top of the list. Select your desired city name from the list. Once you have selected your desi[...]

36 Navigation System Place Name When you select this option, the display changes to the Enter a place name screen. Enter your selection, using the on-screen keyboard. Once you select a place, the system then displays the Calculate route to screen (see Driving to Your Destination on page 45). Finding the Place by Name The Name option allows you to e[...]

Navigation System 37 Showing the Map of Current Position The Current Position selection assumes that y ou are looking for a destination in the immediat e area. The display changes to: The red arrow indicates your vehicle position. Find your desired destinatio n by moving the joystick left, right, up, or down. The map an d crosshairs w ill move in t[...]

38 Navigation System If you selected multiple icons within the cursor radius, the following screen appears. Select an item from the list. Then select OK to calculate a route to the selected destination. Once you select an address, the system then displays the Calculate route to screen (see Driving to Your Destination on page 45). Showing the Map of[...]

Navigation System 39 Use the joystick to move the cro sshairs to the area of the state close to your intended destination. If desired, use the ZOOM buttons to change the map scale. When you have the crosshairs in the desired area, push in on the joystick. The address of the location you have selected will appear at the top of the screen. NOTE: The [...]

40 Navigation System If desired, use the ZOOM buttons to change the map scale. When you have the crosshairs on the desired icon, map feature, or road, push in on the joystick. The address of the location you have selected will appear at the top of the screen. NOTE: The selected icon or road segment is displayed on the 1/2 mile (800 meter) or less m[...]

Navigation System 41 Scroll through the list and say the line number (1-6) of the destinati on, or touch the desired destination you want. Once you select the desired destination, the system then displays the Calculate route to screen (see Driving to Your Destination on page 45). NOTE: • Prior to departure, you can set areas to avoid. The system [...]

42 Navigation System Entering a Destination Adding Destinations to the List After you have used any of the other selections from the Enter destination by screen to select a destination, the display changes to: To add this to the Today’s Destinations list, select ADD TO Today’s Dest . NOTE: If ADD TO Today’s Dest is grayed out, the Today’s D[...]

Navigation System 43 Entering a Destination By Address Book This selection allows you to choose a personal address entry for a destination. After you select Address Book from the Enter destination by screen, the display changes to: If an Address Book PIN has been set in Setup, the system prompts yo u to enter your PIN after you select User 1 or Use[...]

44 Navigation System Entering a Destination By Go Home Selecting Go Home from the Enter destination by screen takes you home or to a frequently used address y ou have chosen. If a Go Home PIN has been set in Setup, the system pr ompts you to enter your PIN. Say or enter your PIN, and say or select Done . The system will then display the Calculate r[...]

Navigation System 45 Driving to Your Destination Driving to Your Destination A route typically has three phases. • Initial route calculation ( Calculate route to screen) (see page 45). • Change the route while en route (see page 63). • Resume the route when restarting the engine (see Continue Trip Screen on page 68). Calculate Route to Screen[...]

46 Navigation System Driving to Your Destination Changing the Routing Method The system lets you select the way you want to drive to your destination. Befor e selecting OK to calculate a route, you can change the routing method by using the CHANGE METHOD scroll bar back ( ) or forward ( ) buttons. The route choices will appear in the address box. N[...]

Navigation System 47 Viewing the Routes Touching View Routes on the Calculate route to screen allows you to scroll through and view the various routes (Direct, Easy, Maximize Freeways, etc.) to your destination. If you select View Routes , the display changes to: NOTE: • You may only view routes as shown above from the Calculate route to screen. [...]

48 Navigation System Driving to Your Destination Viewing the Destination Map Touching View Dest. Map displays a map of the destination vicinity. Press the CANCEL or NAVI BACK button to return. You can view the destination map anytime while en route by saying, “Display destination map.” Map Screen When you select OK on the Calculate route to scr[...]

Navigation System 49 Guidance Prompts As you get near the maneuver, you will hear a voice reminder and see a pop-up window showing you the maneuver. The number of remi nders that you will hear before a maneuver is determined by Guidance Prompts in Setup on page 76. With the factory default (Normal), typically you will hear two prompts: • The firs[...]

50 Navigation System Driving to Your Destination Acura Dealer School Restaurant AT M P arking Lot P ost Office Honda Dealer Hospital Grocery Store Gas Station Hotel/Lodging P arking Garage F reew a y Exit Information Map Screen Legend Map Orientation (see page 55) Map Scale Adjustme nt (Mile or km per half-inch appears only when you ZOOM IN or OUT.[...]

Navigation System 51 Guidance Screen The guidanc e screen offers an alternative way to view your route information. Many of the icons and screen features are similar to those on the map screen. While driving to your destination, press the MAP/GUIDE button to switch between the map and guidance screens. The guidance screen shows you: Milestone to De[...]

52 Navigation System Driving to Your Destination Distance and Time to Destination When you select a destination, the distance to the destination is the actual road distance of the calculated route, and not “as th e crow flies.” When viewing a list of destinations (points of interest), such as restaurants, the distance is “as the crow flies”[...]

Navigation System 53 Exit Info. (Freeway Exit Information) You can search freeway exit information and add new destinations or waypoints to the calculated route as a new destination or waypoint. The ex it info icon ( ) on the right end of th e items in the direction list indicates that there is freeway exit information available. Say or select Exit[...]

54 Navigation System Driving to Your Destination Map Scale Use the ZOOM buttons or say a voice command such as “Display 1/2 mile scale” (see pa ge 139) to change the scale of the map. Zooming in increases the de tail, while zooming out gives you a view of a wide r area. After changing the scale, give the system a few moments to update the displ[...]

Navigation System 55 Map Orientation The map can be orientated two ways: • North-up: North pointing up as you would normally vie w a paper map. • Heading-up: The map cons tantly rotates so the road you are driving on always points up (as you see the road through your front windshield). NOTE: The red arrow in both headi ng symbols always shows t[...]

56 Navigation System Driving to Your Destination The display automatically changes to the map screen when you reach y our destination. Press the MENU button to return to the Enter destination by screen. NOTE: • For information on the available voice commands, see Voice Command Index on page 1 38. • If you are en route and the joystick is moved,[...]

Navigation System 57 For some icons, you can choose either to show or hide th em on the map, while others like Honda Dealer are always shown. The table below shows the features for each icon type. Some Points of Interest (POIs) lik e Police Stations are not shown as an icon , but you can still locate the near est one with the voice command, “Find[...]

58 Navigation System Driving to Your Destination Showing Icons on the Map Touching the ICON button on the map screen displays the following screen: The screen consists of the following items: Icon Bar (row of icon symbols) The icon bar allows you to manually select the icons that are displayed on the map (see page 56 for a list of these icons). In [...]

Navigation System 59 For instance, let’s assume that hospital icons are not displayed on the map. You would do the following: • First, you would ensure that the OTHER ICON button on the Icon bar is blue (see Icon Bar on page 58). • Second, you select Icon Options and verify that hospital option is also on (blue). This procedure is ex plained [...]

60 Navigation System Driving to Your Destination Going Off the Route If you leave the calculated route, “Recalculating...” is displayed at the top of the screen. The system will recalculate the route from your current location and direction to the desired destination, and then give you a new route instruction. This is done automatically if you [...]

Navigation System 61 Viewing/Saving the Current Location Whenever you are on a map screen, you can always obtain yo ur current location either by touching the Vehicle Position icon or by using the voice control system and saying “Display current location.” A screen pops up which shows the address of your current location, as well as the latitud[...]

62 Navigation System Driving to Your Destination Pop-Ups and Disclaimers When you say “OK” in the Calculate Route to screen, or if you change your route, the system checks your route and provides you with pop-up messages for the following situations: • Your route takes you into an area that you previously set as an “Avoid Area” (see Edit [...]

Navigation System 63 Changing the Route While en route, you may wish to alter your route, add an interim “Waypo int” (pit stop), choose a different destination, or cancel your current destination. To change your present route, yo u can do any of the following: Say “Menu,” or press the MENU button to view the Change route by screen: • Sear[...]

64 Navigation System Driving to Your Destination When you enter waypoints, they appear on the map screen as small red flags numbered 1-5. Adding Waypoints From the Change route by screen, if you say or select Search Places on Route , then the Select a search method screen is displayed. Select either Places Along the Route or Places Around the Desti[...]

Navigation System 65 Deleting Waypoints From the Change route by screen, if you say “Delete” or select Delete , then the Select a waypoint to delete screen is displayed. Say the line nu mber of the waypoint(s) you wish to delete , or select them by using the joystick. Say or select Done to return to the map screen. The route is recalculated to [...]

66 Navigation System Driving to Your Destination Cancel Current Route Cancels the current route (and any waypoints) and returns you to the map screen. Back to Current Route Returns you to the original map screen. Changing Your Destination There are four methods by which you can change or add a waypoin t to your route. These are: Find Nearest (Voice[...]

Navigation System 67 When the Select a place screen is displayed, select an item from the list, and the Calculate route to screen is displayed. After you select OK , you can select either Set as New Destination or Set as Waypoint for your specified position. When the address of the location is displayed at the top of the screen, push in on the joys[...]

68 Navigation System Driving to Your Destination Entering a Destination from the Menu Screen (while en route) If you say “Menu” or press the MENU button twice, the system displays the Enter destination by screen. Follow the procedure described in Entering a Destination , which begins on page 2 2. After selecting OK to the Calculate route to scr[...]

Navigation System 69 Information Features Information Screen When you say “Information” or press the INFO button, the display changes to: NOTE: If some items appear to be grayed out and cannot be selected, it is because you did not select OK on the initial Disclaimer screen (see System Start-up on page 16), or there is no phone paired to the sy[...]

70 Navigation System Information Features There is a tutorial available for the voice command help. Say or select Getting started , and the display chang es to: Select the line number of the des ired tutorial you want to view, and the tutorial will automati cally be read. Press Stop to stop the reading, or press the CANCEL button. When you make a c[...]

Navigation System 71 Information Features Calendar The Calendar option allows you to enter events and b e reminded of them in the future. When you say or select Calendar , the system shows the calendar with the current calendar day highlighted. Dates with an icon indicate there is a scheduled entry for that date. You can scroll through the calendar[...]

72 Navigation System Information Features Edit Title Say or select Edit Title , then enter the name of your title using the on-screen keyboard. Once you have entered the title, say or select Done . Edit Message Say or select Edit Message , and the system will show the Edit Message screen. You can enter a message on two lines. Use to change the line[...]

Navigation System 73 Information Features Unit Conversion To perform a conversion: 1. Enter a numeric value to be converted (for example, 100). 2. Select the type of unit you want to convert (for example, weight). The screen for that conversion type appears (see illustration in step 3). 3. Select the base unit (e.g ., pounds) that you wish to conve[...]

74 Navigation System System Setup Setup Mode The Setup function consists of two different screens that allow you to change and update information in the system. To display the Setup screens, use the voice contro l system and say “Setup” or press the SETU P button. To change to another Setup screen, say or select More in the upper right corner o[...]

Navigation System 75 System Setup Display There are two screen display modes: Day and Night . The recommended setting is Auto , which automatically switches the screen between Day and Night modes as you turn the headlights on or off. You can select Day or Night mode to override the Auto mode. This is a useful feature for drivers that like to use he[...]

76 Navigation System System Setup When you select Clock in Setup or the Disclaimer screen times out, the clock screen is displayed (see page 17). DISPLAY OFF When you touch the DISPLAY OFF button, the screen is turned off. Voice guidance will continue to work in this mode. To turn on the screen, press any navigation or voice control button. Clock T[...]

Navigation System 77 System Setup Setup Screen (second) Say or select More to view additional Setup functions and the following screen appears: Personal Information From the Setup screen (second), say or select Personal Information and the following screen appears: Address Book The Address Book allows up to a total of 200 address entries. After 200[...]

78 Navigation System System Setup Accessing the Address Book List After selecting Address Book , the system prompts you to select User 1 or User 2 . If an Address Book PIN has been set, the system prompts you to enter your PIN. Verify that the correct user is displayed, then enter your PIN. After entering your PIN, say or select Done , and the syst[...]

Navigation System 79 System Setup Edit Address When you say or select Edit Address , the display changes to: Current Position - Allows you to use your current position as the address. Address - Requires you to enter the city and address you wish to store. The operation is the same as selecting Address from the Enter destination by screen (see page [...]

80 Navigation System System Setup Edit Category If desired, you can specify the category of the address. Say or select Edit Category to display the Select a category screen. Scroll the screen and select a c ategory by saying the number next to your choice, or by touching the item. If you wish to set, ad d, or edit a new category, select Edit Catego[...]

Navigation System 81 System Setup Home Address This feature lets you return “Home” from any location simply by saying “Go home” at the map screen. Alternatively, you can select Go Home on the Enter destination by screen (see By Go Home on page 44). Enter the name, address, and phone number in the same way as entering a personal address, the[...]

82 Navigation System System Setup 4. If you have entered the PIN correctly, the display changes to the Please re- enter new PIN screen. Enter the same number, then touch Done to validate the number you h ave selected. 5. If you have entered the same number both times, the display returns to the Edit personal information screen. If not, “incorrect[...]

Navigation System 83 System Setup 4. Say or select Done to perform the deletion, and the display returns to the previous screen. Tip: You can delete all addresses by selecting Delete All . Routing & Guidance From the Setup screen (second), say or select Routing & Guidance and the following screen appears: Rerouting If Rerouting is set to Au[...]

84 Navigation System System Setup Unverified Area Routing Allows you to receive turn-by-turn map and voice guidance in unverified areas when en route to a destination (see Map Overview on page 6). The chart below illust rates the routing differences with this setting On or Off. Unverified Area Routing: Off (factory default) Unverified Area Routing:[...]

Navigation System 85 System Setup Unverified Area Routing When driving to your destination, you have the choice of using or not usin g “unverified” roads. You make this choice in the Setup screen (second). The next few pages contain an example of a route to a destination in an unverified area explaining the routing differences found in unverifi[...]

86 Navigation System System Setup With Unverified Area Routing Off , the moment you enter an unve rified street, a caution box appears on the screen and is read by the voice. This lets you know that you are abou t to enter an unverified area and that you wi ll be following a dotted “vector line” that points to your destination. With Unverified [...]

Navigation System 87 System Setup With Unverified Area Routing Off , you are presented with a blue “vector line” that always points to the destination. You must manually choose streets from the map that will lead to your destination. No gui dance is provided, and there are no directions to the destination. With Unverified Area Routing On , a bl[...]

88 Navigation System System Setup Edit Avoid Area This function allows you to select areas you wish to avoid when calculating a route to your destination. You can select up to five areas to avoid. You may wish to set up an “avoid area” to route around long-term road construction, closures, or any area you wish to avoid. If y ou enter a route th[...]

Navigation System 89 System Setup NOTE: The maximum size of the “Avoid area” is 1/4 of the navigation display screen regardless of the map scale setting. The selected area will be displayed as a shaded box with a yellow border. Push in on the joystick to set the end point of the avoided area. To “redraw” the area, touch Cancel and repeat th[...]

90 Navigation System System Setup Edit Waypoint Search Area When driving en route to your destination, you can select a temporary destination waypoint (marked with a small flag on the map) along your ro ute for gas, a restaurant, or other POI. When you resume your trip from the waypoint, the system continues the trip to your original destination. T[...]

Navigation System 91 System Setup Guidance Mode Allows you to select the guidance display mode: Single Screen or Split Screen . To get to Guidan ce Mode from the Setup screen, select in sequence , “More,” “Routing & Guidance,” and “Guidance Mode.” The factory default is Single Screen . NOTE: The Guidance Mode can also be selected on[...]

92 Navigation System System Setup Correct Vehicle Position The system relies on satellites for positioning inform ation. Buildings, tunnels, and other objects can block or reflect these signals, requiring the system to use “dead reckoning” to determine your location and d irection. This can sometimes lead to small errors in positioning, such as[...]

Navigation System 93 System Setup System Information From the Setup screen (second), say or select System Information and the following screen appears: This information is for dealer use only. For ordering updates, use the version number stamped on the label (as Ver. X. XX) of the navigation DVD. See Obtaining a Navigation Update DVD on page 104. W[...]

94 Navigation System System Setup Clock Settings From the Setup screen (second), say or select Clock Settings and the following screen appears: Clock Adjustment When you select Clock Adjustment , the following screen appears: This screen allows you to set or adjust the following: • Auto Daylight Saving Time (Default = On) • Auto Time Zone by GP[...]

Navigation System 95 System Setup Auto Time Zone by GPS Sets automatic time zone selection by GPS to On or Off . If you are dri ving across the country and pa ssing through time zones, then this feature will automatically set the time to the time zone you are t raveling throug h. However, if you live and work in two different time zones, you may wa[...]

96 Navigation System System Setup Color From the Setup screen (second), say or select Color and the following screen appears: Map Color Allows you to choose the map color from one of four colors for the Day and Night modes. Say or select Return to return to the previous screen. NOTE: • Choose White (factory default is Beige) as the Day color to o[...]

Navigation System 97 System Initialization System Initialization If for any reason you lose power to the navigation system (e.g., the battery was disconnected), the navigation system will require initialization. Once completed, your system will be ready to use. This initialization requires the following: • Entry of the 4-digit anti-theft security[...]

98 Navigation System System Initialization GPS Initialization Depending on the length of time the battery was disconnected, your system may require GPS initialization. If it does, the following screen appears: If this procedure is not necessary, the system proceeds directly to the Disclaimer screen (see page 16). During initialization, the system s[...]

Navigation System 99 System Limitations Although your navigation system is one of the most highly sophisticated pieces of equipment you will find in a modern automobile, you may find during its use that it has certain limitations. The system uses GPS signals to aid in determining its current location. The GPS is operated by the U.S. Department of D[...]

100 Navigation System System Limitations The destination icon shows the approximate location of the destination. This occurs because a city block can have as many as 100 possible addresses (for example, the 1400 block is followed by the 1500 block). Since most cities use only a portion of the 10 0 possible addresses (for example, in the 1400 block,[...]

Navigation System 101 Database Limitations You will find that some points of interest (POI) may be missing when you search the database. This can be caused if at the time the database was gathered, the name was misspelled, the place was improperly categorized, or the POI change is not yet in the database. This means you may not find pl aces listed [...]

102 Navigation System Database Limitations • Traffic congestion • Travel time We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above. Copyrights • infoUSA-Data: Certain business data provided by infoUSA, Inc., Omaha, Nebraska, Copyright © 2007 , All Rights Reserved. ?[...]

Navigation System 103 Customer Assistance Reporting Errors Occasionally, you may enco unter database errors. • If the error pertains to freeways and main “verified” roads shown in black on the map, then report it either online at http://update.navteq.com/ , or to Honda Customer Service. • If the error involves a light brown “unverified”[...]

104 Navigation System Customer Assistance Visiting Your Dealer We strive to make this manual as complete as possible and to answer all questions regarding operation of th e system. Occasionally, you may run into a specific issue t hat you cannot find in the book. You may save yourself a trip to the dealer by first consulting the following resources[...]

Navigation System 105 Customer Assistance Changing the DVD NOTE: The system’s database is stored on a removable DVD. The system will not work without the DVD. Ensure the door remains closed at all times. 1. Remove the DVD while the ignition switch is in the ACCESSORY (I) position or in the ON (II) position. 2. Push the OPEN button to tilt the scr[...]

106 Navigation System Customer Assistance PC Card Operation A PC card with WMA or MP3 audio files can be played through the audio system and controlled using the navigation voice control system. PC card (PCMCIA) adaptors and various media chips can be purchased at any computer sto re. Tested me dia chips include Compact Flash and SD media, up to 2G[...]

Navigation System 107 Customer Assistance Voice Control of CD Functions The navigation voice control system can be used to select the first 30 tracks directly by using the command, “CD play track X” (X =1-30). Additional voice commands allow CD tracks, and folders be played in a ra ndom, repeat, or scan mode. See the complete list of “CD” v[...]

108 Navigation System Coverage Areas Map Coverage The system provides map coverage for the lower 48 U.S. states, Hawaii, and southern Canada. The U.S. map coverage consists of accura tely mapped (verified) metropolitan areas (in the following list) and a less accurate (unverified) rural database. Canada coverage consists of major metropolitan areas[...]

Navigation System 109 Coverage Areas Florida Cape Canaveral/Cocoa Be ach/ Titusville Florida Keys Fort Myers Metro area – including Naples Fort Pierce Gainesville Jacksonville Metro – including St. Johns County Miami/Fort Lauderdale/West Palm Beach Metro Orlando/Daytona Beach/Melbo urne area – including Osceola County Panama City Pensacola Ta[...]

110 Navigation System Coverage Areas Louisiana Baton Rouge New Orleans Metro Shreveport Maine Bangor Bar Harbor/Acadia National Park Portland/Lewiston/Auburn Maryland State of (partial) - Baltimore/ Washington D.C. Metro – including Charles and Carroll Counties Cumberland Ocean City Massachusetts Boston/Cape Cod Metro Cape Cod Springfield Metro a[...]

Navigation System 111 Coverage Areas New Jersey Camden Metro Newark Metro Southern New Jersey – including Atlantic City/Cape May/ Cumberland Metro Trenton Metro – including Ocean and Hunterdon Counties New Mexico Albuquerque Las Cruces Santa Fe Taos Ski Resorts New York Binghamton Buffalo – including Erie and Niagara Counties Eastern New York[...]

112 Navigation System Coverage Areas South Carolina Beaufort Charleston Columbia Greenville/Spartanburg – including additional cities in Greenville and Spartanburg Counties Myrtle Beach Metro Rock Hill Metro South Dakota Sioux Falls Tennessee Chattanooga Johnson City/Kingsport/Bristol Knoxville/Farragut Metro Memphis Metro – including Desoto an[...]

Navigation System 113 Coverage Areas Wisconsin Appleton Beloit Eau Claire Green Bay Janesville Kenosha County La Crosse Madison Lake Geneva Milwaukee Metro – including Milwaukee, Ozaukee, Washington, and Waukesha Counties Neenah Oshkosh Racine Sheboygan Wausau Wyoming Cheyenne Jackson Ski Resorts Canada Detailed Coverage Areas NOTE: The blue city[...]

114 Navigation System Coverage Areas Fraser Valley Abbottsford Chilliwack Mission Squamish-Lillooet Squamish Whistler Thompson-Nicola Kamloops Central Okanagan Kelowna Peachland Okanagan-Similkamen Penticton Summerland Victoria Capital Central Saanich Colwood Esquimalt Highlands Langford Metchosin North Saanich Oak Bay Saanich Sidney Sooke Victoria[...]

Navigation System 115 Coverage Areas Grey Blue Mountains Chatsworth Georgian Bluffs Meaford Grey Highlands Hanover Owen Sound Southgate West Grey Haldimand Haldimand Halton Burlington Halton Mills Milton Oakville Hamilton Hamilton Kawartha Lakes Kawartha Lakes Lambton Brooke-Alvinston Dawn-Euphemia Enniskillen Lambton Shores Oil Springs Petrolia Pl[...]

116 Navigation System Perth North Perth Perth East Perth South St. Mary’s Stratford West Perth Simcoe Adjala-Tosorontio Barrie Bradford West Gwillimbury Clearview Collingwood Essa Innisfil Midland New Tecumseth Orillia Oro-Medonte Penetanguishene Ramara Severn Springwater Tay Tiny Wasaga Beach Toronto Toronto Waterloo Cambridge Kitchener North Du[...]

Navigation System 117 Coverage Areas Leeds and Granville Lennox and Addington Middlesex Muskoka Northumberland Oxford Perth Peterborough Prescott and Russell Prince Edward Simcoe Stormont, Dundas, and Glenga rry Waterloo Wellington QUÉBEC Montreal-Laurentians Deux-Montagnes Deux-Montagnes Oka Pointe-Calumet St-Eustache St-Joseph-du-Lac Ste-Marthe-[...]

118 Navigation System Les Laurentides Amherst Arundel Barkmere Brèbeuf Huberdeau La Conception La Minerve Labelle Lac-Supèrieur Lantier Mont-Tremblant Montcalm St-Faustin-Lac-Carrè Ste-Agathe-des-Monts Ste-Lucie-des-Laurentides Val-David Val-des-Lacs Val-Morin Les Moulins Mascouche Terrebonne Les Pays-D’en-Haut Lac-des-Seize-Îles Morin-Height[...]

Navigation System 119 Vaudreuil-Soulanges Coteau-du-Lac Hudson Les Cèdres Les Coteaux L’Ile-Cadieux L’Ile-Perrot Notre-Dame-de-l’Ile-Perrot Pincourt Pointe-des-Cascades Pointe-Fortune Rigaud Riviere-Beaudette St-Clet Ste-Justine-de-Newton St-Lazare Ste-Marthe St-Polycarpe St-Telesphore St-Zotique Terrasse-Vaudreuil Vaudreuil-Dorion Vaudreuil[...]

120 Navigation System Coverage Areas CANADA CONNECTOR ROADS The Cross-Canada Connector Road allows for travel between the provinces of British Columbia and Quebec in DCA 11. Major metropolitan city POIs are also included. Road Inclusion Roads in the province of British Columbia Hwy-1/Trans Canada Hw y from Alberta/BC boundary to Vancou ver detailed[...]

Navigation System 121 Operation in Alaska and Hawaii Certain functions that rely on a satellite signal will not work in Alask a and Hawaii. These functions include but are not limited to automa tic clock updates and time zone adjustments. Alaska If the vehicle was purchased in the lower 48 states and dr iven to Alaska, the system cannot display map[...]

122 Navigation System Coverage Areas Setup Screen Differences The Setup screen differences are minor and are listed below. See the Setup section (page 74) for additional information. Routing and Guidance (Unverified Area Routing On/Off) This feature is unavailable. All roads displayed on the map are verified. Clock Adjust Screen There is no dayligh[...]

Navigation System 123 Frequently Asked Questions Map and Features, Voice Opera tion, Entering Addresses Problem Solution Why does the Disclaimer screen need to be displayed every time I start the car? I am the only driver. The Disclaimer screen reminds you and your guest drivers to always operate the navigation system in a safe manner. The Setup or[...]

124 Navigation System When I drive at night, the screen is bright and will not switch to the night displa y mode. Why? The system thinks it is in Day display mode. Verify th e following: The display mode in Setup is set to Auto , the dash brightness is not set to maximum (must adju st with headlights on) , and Map Color in Setup is set to Black for[...]

Navigation System 125 Frequently Asked Questions Guidance, Routing Problem Solution The navigation does not ro ute me the same way I would go, or the way some other mapping program displays. Why is this? The navigation system attempts to generat e the optimum route. See Changing the Routing Method on page 46. Why is the street I’m on not s how n [...]

126 Navigation System While I drive, my screen s hows white dots (“breadcrumbs”) on it. What do they mean? These are called “breadcrumbs.” If yo u drive more than 1/2 mile from mapped roads, the off-road tracking feature begins to function . See Off-road Tracking on pages 60 and 91. How can I get rid o f the white dots (“breadcrumbs”) f[...]

Navigation System 127 Frequently Asked Questions Ordering a Navigation DVD, Coverage, Map Errors, Limitations Problem Solution I want to buy a new DVD. How do I purchase one? Y ou cannot obtain a new DVD from the dealer. See Obtaining a Navigati on Update DVD on page 104. I want to order a DVD. How can I determine the DVD version in my navigation s[...]

128 Navigation System Display, PC Card, Accessories Problem Solution The display appears dim when st arting the car in really cold weather. Is there a problem? No. This is normal, and it will become brighter after a few minutes. The screen does not close completely. Why is this? • Ensure that it is not during inserting/ejecting a CD. The screen c[...]

Navigation System 129 Frequently Asked Questions I insert a PC card with music files, but the CARD button or navigation “PC Card” voice commands do not work. What’s wrong? • After inserting the card, a delay of up to 30 seconds may be required to read the tag information (a lbum, artist, and track na mes) - this is normal. • Ensure that t[...]

130 Navigation System Frequently Asked Questions I insert a CD-R with music files, but the CD button or “CD” voice commands do not work. What is wrong? • After inserting a CD-R with WMA or MP3 files, a slight delay may occur before the CD button operates. Th e system needs to read the tag information (album, artist, and track na mes) to allow[...]

Navigation System 131 Miscellaneous Other Questions Problem Solution My clock frequently changes forward and backward by one hour. Why is this? The clock is being automatically set based on your GPS location. If you live and work on the boundary between two time zones, you can turn off t his feature. See page 95. When driving near a time zone borde[...]

132 Navigation System Frequently Asked Questions My battery was disconnected or went dead, and the navigation system is asking for a code. Where do I find this code? There should be a card in the glove box with the anti-theft code for the navigation/audio system. This card contains the 4-digit secu rity code and serial number. If you cannot find it[...]

Navigation System 133 Troubleshooting Screen Error Message Solution Navigation system is unable to acquire a proper GPS signal. Make sure there is nothing on the dashboard blocking the GPS antenna (aftermarket metallic window tin ting or aftermarket devices placed on the dashboard, like radar detectors, ce ll phones, or loose items). If the dashboa[...]

134 Navigation System Troubleshooting * If the error persists or is shown for a wide area, see your dealer. No alternate route found. Original route will be followed. No al ternative route method was found. The original route method will be used.* Ensure that a road name is di spla yed at the bottom of the map. This destination cannot be found in d[...]

Navigation System 135 Glossary Glossary The following is a glossary of terms pertaining to the voice recognition navigation system. Avoid Area - Areas you wish to avoid can be entered into the system, and will be avoided while routing. Breadcrumbs - Off-road tracking dots that can be followed on the map to retrace your route back to a mapped (digit[...]

136 Navigation System Glossary LCD - Liquid Crystal Display. The navigation screen. Map Matching - The receiv ed GPS information allows the navigation system to position the vehicle on the map. Map matching has occurre d if the map screen is displaying the current street name in the bottom- shaded area. Mic - Abbreviation for the microphone used fo[...]

Navigation System 137 Glossary Unverified Streets - These streets have not been verified fo r turn restrictions, one-way, etc. They are shown in light brown on the map. Unverified streets may be missing from th e map, shown in the wrong location, or have an incorrect name or address range. USB - Universal Serial Bus. A computer hardware interface u[...]

138 Navigation System Voice Command Index Global Commands The system accepts these commands on any screen. Help (reads list of the commands for the displayed screen) Setup (displays the Setup screen (first)) Display map (displays the map screen) Display menu (displays the Enter destination by screen) Display audio screen Information (displays the I[...]

Navigation System 139 Voice Command Index Navigation Display Commands The system accepts these commands on a map/guidance screen. Display current location (shows current latitude, longitude, and elevation) Display north up Display heading up Display zoom in Display zoom out Display: (the selected scale) 1/20 mile (80 m) scale 1/8 mile (200 m) scale[...]

140 Navigation System Voice Command Index Find Place Commands The system accepts these commands on a map/guidance screen. Find nearest: (find the nearest selection) ACURA dealers HONDA dealers gas station hydrogen station ATM bank post office hospital police station hotel tourist attraction restaurant (all restaurant types) American restaurant Chin[...]

Navigation System 141 Voice Command Index toy store airport automobile club bus station camping commuter rail station ferry terminal named place park & ride rental car agency resort rest area ski area tourist information train station travel agency truck stop Climate Control Commands The system accepts these commands on most screens. Climate co[...]

142 Navigation System Voice Command Index Temperature Voice Commands The system accepts these commands on most screens. Temperature # degrees (#: 57-87 degrees F) Temperature up Temperature down Temperature max hot Temperature max cold Radio Voice Commands The system accepts these commands on most screens. Audio on* Audio off* Radio on* Radio off* [...]

Navigation System 143 Voice Command Index CD Voice Commands The system accepts these commands on most screens. CD play CD play track # (#: 1-30) CD skip forward CD skip back CD track random* CD track repeat* CD track scan* CD folder random* CD folder repeat* CD folder scan* CD normal play CD track list * Repeating these comma nds switches (toggles)[...]

144 Navigation System Voice Command Index Information Screen Voice Commands These are additional commands not found on the Voice Command Help screen available when viewing the Information screen. Follow the voice prompts. Cellular phonebook Voice command help (the system reads and lists all of the commands, starting with Navigation General Commands[...]

Navigation System 145 Voice Command Index On-Screen Commands The system accepts these c ommands on any screen. There are o ver 100 on- screen commands. Just say what is written on the screen (this excludes keyboard letters, and listed items) Next (or “Down”) Previous (or “Up”) Return OK (except at the Disclaimer screen) Delete Done On-Scree[...]

146 Navigation System Voice Command Index Symbol Assist Definitions NOTE: The term “grave” used for these keys ( À , È , Ì , and Ù ) is pronounced like “save.”[...]

Navigation System 147 Index A Accessing the Address Book List ..... 78 ADD TO Today’s Destinations ...........................42, 45 Adding Destinatio ns to the List ........ 42 Address ..............................22, 23, 79 Address Book .....................22, 43, 77 Address Book PIN ..........................81 Advanced .....................[...]

148 Navigation System Index E Easy Route ..................................... 46 Edit Avoid Area ..............................88 Edit Waypoint Search Area .............. 90 Edit/Delete Address ........................ 80 Editing Today’s De stinations List .... 41 Emergency ..................................... 33 Entering a Destination ........[...]

Navigation System 149 Index N Name .................................32, 36, 78 NAVI BACK button ........................12 NAVI TALK button ........................ 12 Navigation Display Comman ds ......139 Navigation General Commands ...... 138 O Off-road Tracking ..................... 60, 91 One-Way Traffic Icon ..................... 56 On-Screen[...]

150 Navigation System Index V Vehicle ...........................................91 Verified Streets ................................. 7 View Routes ...................................47 Voice Command Help .....................69 Voice Command Index .................. 138 Voice Control Basics ....................... 12 Voice Recognition Feedback ..[...]

Navigation System 151 License notice You have acquired a device (“DEVICE”) that includes software licensed by ALPINE ELECTRONICS, INC., from an affiliate of Microsoft Corporation (collectively “MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “onl ine” or electronic documentation [...]

152 Navigation System the SOFTWARE after the date you obtain your initial copy of the SOFTWARE (“Supplemental Componen ts”). • If ALPINE ELECTRONICS,INC., provides or makes available t o you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply. • If MS, [...]