Honeywell 70E-WEH-QS manual

Dolphin™ 70e Black with Windows ® Embedded Handheld 6.5 Quick Start Guide 70E-WEH-QS Rev B 6/13[...]

Out of the Bo x Verify that your carton contains the following items: • Dolphin 70e Black mobile computer (terminal) • Rechargeable 3.7V Li-ion Battery • USB charge/communication cable • Power adapter with regional plug adapters • Quick Start Guide • Compliance Regulatory Sheet If you ordered accessories f or your terminal, verify that [...]

Getting to Know the Dolphin 70e Blac k Front Microphone* Scan Button General Notification LED Right Scan/ Image Button USB Door/ Micro USB Port End Button Home Button Side Microphone* Send Button Back Button WAN Notification LED Front Speaker Touch Panel Display Bottom Speaker * Important - Do not cover the side microphone with your hand when using[...]

Camera Flash/ Flashlight Color Camera Lens I/O Connector Battery Door (standard model shown) Volume Control Button Left Scan/Image Button Power Button Audio Jack Image Engine Window (LED aperture) Battery Latch and Retention Strap (battery and battery door not shown) SIM Card Socket Memory Card Socket Memory Card Retention Flap SIM Card Retention F[...]

Installing the Battery Dolphin 70e Black model terminals are designed for use with battery part numbers BAT-STANDARD-01 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-01 (Li-ion 3.7 V, 12 .358 watt hour) manufactured for Honeywell International Inc. The Dolphin 70e Black is shipped with the battery packaged separately from the terminal. Perform t[...]

We recommend use of Honeywell Li-ion battery packs. Use of any non- Honeywell battery may result in damage not covered by the warranty. Once the battery is installed, connec t the terminal to one of the Dolphin 70e Black charging peripherals to charge the battery. Charging the Dolphin 70e Blac k Dolphin terminals ship with the batte ry significantl[...]

HomeBase P ar ts HomeBase LED Indicators AUX battery LED Orange The auxiliary battery is charging. Green The auxiliary battery has completed charging and is ready for use. Dock LED Blue The terminal is properly seated in the base. COMM LED Green A USB connection is established with the host workstation. 2 AUX Battery Well AUX Battery LED COMM LED D[...]

USB Charge/Comm unication Cable (70e-USB AD APTERKIT) The USB Charge/Communication cable prov ides two options for charging the terminal. Use the cable in conjunction with the provided power supply adapter and plug adapter to charge the terminal from a power outlet or connect the cable to a high-power USB port to charge from a host device. Option 1[...]

T urning P o wer On/Off To turn the terminal On , press and release the Power button . To turn the terminal Off : 1. Press and hold the Power button for approximately 4 seconds until the options menu displays. 2. Touch Power off . Suspend Mode Suspend mode automatically turns the touch screen off to save battery power when the terminal is inactive [...]

Installing the SIM Card and/or Memory Car d Honeywell recommends the use of Sing le Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with Dolphin terminals for maximum performance and durability. Contact a Honeywell sales representative for additional informati on on qualified memory card options. To install the SIM Card an[...]

Navigation and Function Buttons Note: Additional functionality varies according to the application in use. The Dolphin 70e Black has six programmable buttons: Scan , Home , Back , End and the Right and Left side buttons. You can reassign the buttons to launch applications or execute commands. Refer to the User’s Guide for additional information. [...]

Virtual Keyboar d The enhanced Honeywell virtual keyboard appears when you open an application or select a field that requires text or numerical input. You can also touch the keyboard icon on the tile bar at the bottom of the screen to toggle the virtual keyboard on or off. T he content of the keyboard may vary depending on the application in use a[...]

Using the Scan Engine Demo 1. Touch > Demos > Scan Demo . 2. Point the Dolphin terminal at the bar code. 3. Press and hold the Scan button. The aiming beam appears. Note: The left and right side butt ons also trigger the scan/image engine. 4. Center the aiming beam over the bar code. Note: For optimum performance, avoid reflections by scannin[...]

Synchr onizing Data with a Host Device (PC) To synchronize data (e.g., e-ma il, contacts, and calendar) between the terminal and the host workstation (PC): 1. ActiveSync ® (version 4.5 or higher) or Windows ® Mobile Device Center (WDMC) must be installed on your PC. You can download the most current version of ActiveSync or WDMC from the Microsof[...]

Resetting the terminal There are three types of system resets: a soft reset, a hard reset, or a factory reset. The soft and hard resets preser ve all data stored in the file system. Contact a Honeywell technical support representative for more information on how to perform a factory reset. A Soft Reset (Warm Boot) re-boots the device and preserves [...]

T echnical Assistance Contact information for technical support, product service, and repair can be found at www.honeywellaidc.com . User Documentation For localized versions of this docum ent, and to download the User’s Guide, go to www.honeywellaidc.com . Limited W arranty Refer to www.honeywellaidc.com/warranty_information for your product’s[...]