HP (Hewlett-Packard) 686784-001 manual

HP Pr oL iant DL5 6 0 Serv er Maint enance and S erv ice Gui de January 2004 (Third Edition) Part Number 303206-003[...]

© 2004 Hewlett-Packard Development Company, L.P. Microsoft, Wi ndows, and Windo ws NT are trademarks of Micros oft Corporation in the U.S . and other countries. Intel and Pentium are trad emarks of Intel Co rporation i n the U.S. and ot her countries. Hewlett-Packa rd Company sh all not be liabl e for technical or editorial errors or omissi ons co[...]

3 Contents Illustrated Parts Catalog 7 Mechanical Components .......................................................................................................... ............ 7 System Co mponents.............................................................................................................. ............... 8 Removal and Replacem[...]

4 HP ProLiant DL560 Server Maintenance and Ser vice Guide Battery ........................................................................................................................ ........................ 48 SCSI Cable ..................................................................................................................... ......[...]

Contents 5 Hot-Plug SCSI Ha rd Drive LEDs .................................................................................................. .... 89 Hot-Plug SCSI Hard Dr ive L ED Combinations................................................................................. 90 PCI Riser Cage LED ......................................................[...]

[...]

7 Illustrated Parts Catalog In This Section Mechanical Components .......................................................................................................... ...... 7 System Components ....................................................................................................................... 8 Mechanical Components Item D[...]

8 HP ProLiant DL560 Server Maintenance and Ser vice Guide System Components Item Description Assembly Part Number Spare Part Number System Components 6 Hot-plug fan, 60 mm 289596-001 310795-001 7 Hot-plug power supply, 550 W 280126-001 300892-001 8 PCI riser cage 313004-001 295012-001 9 Processor assembly a) Intel Pentium processor, Xeon MP, 2.0-GH[...]

Illustrated Parts Catalog 9 Item Description Assembly Part Number Spare Part Number c) Intel Pentium processor, Xeon MP, 2.8-GHz/2-MB L3 cache — 327841-001 d) Intel Pentium processor, Xeon MP, 2.2 GHz/2-MB L3* — 352311-001 e) Intel Pentium processor, Xeon MP, 2.7 GHz/2-MB L3* — 352312-001 f) Intel Pentium processor, Xeon MP, 3.0 GHz/4-MB L3 ?[...]

10 HP ProLiant DL560 Server Maintenance and Ser vice Guide Item Description Assembly Part Number Spare Part Number 25 Hardware kit * a) Screws, T-15, flathead b) Expansion slot cover c) Screws, 6-32 — 228213-001 228072-001 192308-009 228527-001 — — — 26 Plastics kit a) PCI slot release lever * b) Battery Backed-Write Cache Enabler bra cket [...]

Illustrated Parts Catalog 11 Item Description Assembly Part Number Spare Part Number * Not shown[...]

[...]

13 Removal and Replacement Procedures In This Section Safety Considerations .......................................................................................................... ......... 14 Preparation Procedures ......................................................................................................... ........ 15 Hot-Plug SCSI[...]

14 HP ProLiant DL560 Server Maintenance and Ser vice Guide You need the following items for some procedures: • • Torx T-15 screwdriver (p rovided with the server) Diagnostics Utility • • • • • Safety Considerations Before performing service procedures, review all the safety information. Preventing Electrostatic Discharge To prevent da[...]

Removal and Replacem ent Procedures 15 WARNING: To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord groundin g plug. The grounding plug is an important safety feature. • • • • Plug the power cord into a grounded (earthed) electric outlet that is easily accessible at all times. Unplug the power cord[...]

16 HP ProLiant DL560 Server Maintenance and Ser vice Guide • Power down the server ("Powering Down the Server" on page 16 ). If you must remove a server from a rack or a non-hot-plug component from a server, power down the server. • Remove the server from the rack ("Re moving the Server from the Rack" on page 18 ). If the ra[...]

Removal and Replacem ent Procedures 17 5. If the server is installed in a r ack, locate the server by identifying the illuminated rear UID LED button. 6. Disconnect the power cords. The system is now without power. Extending the Server from the Rack 1. Loosen the thumbscrews that secure the server faceplate to the front of the rack. 2. Grasping the[...]

18 HP ProLiant DL560 Server Maintenance and Ser vice Guide a. Press the server rail-release latches and slide the server fully into rack. b. Secure the server by tightening the thumbscrews. Removing the Server from the Rack To remove the server from a Compaq br anded, telco, or third-party rack: 1. Power down the server ("Powering Down the Ser[...]

Removal and Replacem ent Procedures 19 CAUTION: Do not operate the server for long periods without the access panel. Operating the server witho ut the access panel results in improper airflow and impr oper cooling that can lead to the rmal damage. 1. Power down the server if performing a non-hot-plug installation or maintenance procedure ("Pow[...]

20 HP ProLiant DL560 Server Maintenance and Ser vice Guide To replace the component, reverse the removal procedure. Hard Drive Blank To remove the component: CAUTION: To prevent improper cooling an d thermal damage, do not operate the server unless a ll bays ar e populated with either a component or a blank. To replace the blank, slide the blank in[...]

Removal and Replacem ent Procedures 21 2. Remove the CD-ROM drive. To replace the CD-ROM drive, slide the driv e into the bay until the drive is fully seated. CD-ROM Drive Blank To remove the component: CAUTION: To prevent improper cooling an d thermal damage, do not operate the server unless a ll bays ar e populated with either a component or a bl[...]

22 HP ProLiant DL560 Server Maintenance and Ser vice Guide IMPORTANT: The ejector button is recessed to prevent accidental ejection; it may be helpful to use the Torx T-15 tool on the back of the server or similar shaped objec t to access the button. To replace the blank, slide the blank into the bay until it locks into place.[...]

Removal and Replacem ent Procedures 23 Universal Hot-Plug Tape Drive To remove the component: CAUTION: To prevent improper cooling an d thermal damage, do not operate the server unless a ll bays ar e populated with either a component or a blank. To replace the Universal Hot-Plug tape drive, slide the drive into the bay until it locks into place. Ta[...]

24 HP ProLiant DL560 Server Maintenance and Ser vice Guide 3. Remove the tape drive blank. a. Reach underneath and squeeze the middle of the tape drive blank (1). b. Pull the blank out of the bay (2). 4. To replace the blank, slide the bla nk into the bay until it locks into place. Hot-Plug Power Supply To remove the component: 1. Unlock the hinge [...]

Removal and Replacem ent Procedures 25 3. Remove the shipping screw a nd then the hot-plug power supply. IMPORTANT: The power supply shipping screw is not required for server operation. It is only required for shipping. To replace a hot-plug power supply: 1. Remove the protective cover from the connector pins on the power supply. WARNING: To reduce[...]

26 HP ProLiant DL560 Server Maintenance and Ser vice Guide 2. Slide the power supply into the power supply bay. 3. Connect the power cord to the power supply. 4. Route the power cord through the cable management arm or power cord anchor. NOTE: If using the power cord anchor, be sure to leave enoug h slack in the power cord so that the redu ndant po[...]

Removal and Replacem ent Procedures 27 1. Slide the power supply blank into the ba y until it locks into place. 2. Swing the cable management arm into place and lock it. Hot-Plug Fan To remove the component: 1. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the [...]

28 HP ProLiant DL560 Server Maintenance and Ser vice Guide CAUTION: Do not operate the server for long periods without the access panel. Operating the server witho ut the access panel results in improper airflow and impr oper cooling that can lead to the rmal damage. IMPORTANT: For optimum cooling, inst all fans in all primary fan locations. For mo[...]

Removal and Replacem ent Procedures 29 5. Remove the front bezel. To replace the component, reverse the removal procedure. Front Fan Module To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , &[...]

30 HP ProLiant DL560 Server Maintenance and Ser vice Guide 4. Lift the removable media tray. 5. Remove the fan module. NOTE: Fans do not have to be removed to install or remove the fan module. To replace the front fan bracket, reverse the removal steps and press down on the top of each fan to be sure it is seated properly.[...]

Removal and Replacem ent Procedures 31 Battery-Backed Write Cache Enabler Bracket To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" on page 18 ).[...]

32 HP ProLiant DL560 Server Maintenance and Ser vice Guide Battery-Backed Write Cache Enabler To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" o[...]

Removal and Replacem ent Procedures 33 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend the server from the rack, if applicable ("Extending the Server from the Rack" on page 17 ). 3. Remove the access panel ("Re moving the Access Panel" on page 18 ). 4. Disconnect any internal or extern al c[...]

34 HP ProLiant DL560 Server Maintenance and Ser vice Guide 3. Unlock the PCI retaining clip. CAUTION: To prevent improper cooling an d thermal damage, do not operate the server unless all PCI slots have eith er an expansion slot cover or an expansion board installe d. 4. Remove the expansion board. To replace the component, reverse the removal proc[...]

Removal and Replacem ent Procedures 35 Expansion Slot Cover To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" on page 18 ). 3. Remove the access [...]

36 HP ProLiant DL560 Server Maintenance and Ser vice Guide 3. Remove the access panel ("Re moving the Access Panel" on page 18 ). 4. Remove the PCI riser cage ("PCI Riser Cage" on page 32 ). CAUTION: To prevent damage to the server or expans ion boards, power down the server and remov e all AC power cords before removing or inst[...]

Removal and Replacem ent Procedures 37 8. Remove the PCI slot release lever. To replace the component, reverse the removal procedure. Power Module To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page[...]

38 HP ProLiant DL560 Server Maintenance and Ser vice Guide 4. Disconnect internal power cables. 5. Remove power module. To replace the component, reverse the removal procedure.[...]

Removal and Replacem ent Procedures 39 DC Converter Module To remove the component: NOTE: You do not have to remove the DC converter module to remove the power module. 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 [...]

40 HP ProLiant DL560 Server Maintenance and Ser vice Guide 6. Remove the DC converter module. Power Button/LED Board To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Serve[...]

Removal and Replacem ent Procedures 41 4. Lift the removable media tray. 5. Remove the front fan module.[...]

42 HP ProLiant DL560 Server Maintenance and Ser vice Guide 6. Remove the screws from the front bezel to expose the power button/LED board. 7. Remove the power button/LED board. To replace the component, reverse the removal procedure.[...]

Removal and Replacem ent Procedures 43 DIMMs To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" on page 18 ). 3. Remove the access panel ("Re[...]

44 HP ProLiant DL560 Server Maintenance and Ser vice Guide Processor To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" on page 18 ). 3. Remove th[...]

Removal and Replacem ent Procedures 45 CAUTION: Failure to open the processor locking lev er completely prevents the processor from seat ing during installation, leading to hardware damage. CAUTION: To prevent possible server malfunction and damage to the equipment, do not mix processors of differen t types. CAUTION: To prevent possible server malf[...]

46 HP ProLiant DL560 Server Maintenance and Ser vice Guide CAUTION: To prevent possible server malfunction or damage to the equipment, be sure to completely close the process or locking lever. PPM To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack (&quo[...]

Removal and Replacem ent Procedures 47 Smart Array 5i Plus Memory Module To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" on page 18 ). 3. Remov[...]

48 HP ProLiant DL560 Server Maintenance and Ser vice Guide CAUTION: To prevent damage to the memory module dur ing installation, be sure the memory module is fully inserted befo re pressing down. Battery If the server no longer automatically disp lays the correct date and time, you may need to replace the battery that provides power to the real-tim[...]

Removal and Replacem ent Procedures 49 5. Remove the battery. IMPORTANT: Replacing the system board battery resets the system ROM to its default configuration. Afte r replacing the battery, reconfigure the system through RBSU. To replace the component, reverse the removal procedure. For more information about battery replacement or proper disposal,[...]

50 HP ProLiant DL560 Server Maintenance and Ser vice Guide 4. Disconnect and remove the SCSI cable. To replace the component, reverse the removal procedure. SCSI Backplane To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server fr[...]

Removal and Replacem ent Procedures 51 6. Disconnect cables connected to the SCSI backplane. 7. Remove the SCSI backplane. To replace the component, reverse the removal procedure. Removable Media Tray To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ).[...]

52 HP ProLiant DL560 Server Maintenance and Ser vice Guide 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" on page 18 ). 3. Remove the access panel ("Re moving the Access Panel" on page 18 ). 4. Lift the removable media tray. 5. Discon[...]

Removal and Replacem ent Procedures 53 6. Remove the removable media tray. Peripheral Board To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ). 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" on [...]

54 HP ProLiant DL560 Server Maintenance and Ser vice Guide 6. Release the peripheral board from the system board. 7. Remove the peripheral board. System Board To remove the component: 1. Power down the server ("Powering Down the Server" on page 16 ).[...]

Removal and Replacem ent Procedures 55 2. Extend or remove the server from th e rack ("Extending the Server from the Rack" on page 17 , "Removing the Server from the Rack" on page 18 ). 3. Remove the access panel ("Re moving the Access Panel" on page 18 ). 4. Remove the PCI riser cage ("PCI Riser Cage" on pag[...]

56 HP ProLiant DL560 Server Maintenance and Ser vice Guide 12. Remove the system board thumbscrew. 13. Identify the alignment keys and keyhole locations.[...]

Removal and Replacem ent Procedures 57 14. Remove the system board. NOTE: The system board spare kit does not includes DIMMs, processors, PPMs, or the Smart Array 5i memory module. To replace the component, reverse the removal procedure. IMPORTANT: If replacing the system board or clearing NVRAM, you must re-enter the server serial num ber through [...]

58 HP ProLiant DL560 Server Maintenance and Ser vice Guide 2. Remove the rear fan bracket. To replace the component, reverse the removal procedure. Re-Entering the Server Serial Number After you replace the system board or clear NVRAM, you must re-enter the server serial number. 1. During the server startup sequence, press the F9 key to access RBSU[...]

Removal and Replacem ent Procedures 59 8. Press the F10 key to confirm exiting RBSU. The server will automatically reboot.[...]

[...]

61 Diagnostic Tools In This Section Automatic Server Recovery...................................................................................................... .... 61 Insight Manager 7 .............................................................................................................. ........... 62 Integrated Management Log ........[...]

62 HP ProLiant DL560 Server Maintenance and Ser vice Guide Insight Manager 7 Insight Manager 7 is a Web-based application that allows system administrators to accomplish normal administrative task s from any remote location, using a Web browser. Insight Manager 7 provi des device management capabilities that consolidate and integrate management dat[...]

Diagnostic Tools 63 Integrated Lights-Out Technology Integrated Lights-Out is a standard component of selected ProLiant servers that provides server health and remote se rver manageability. The iLO subsystem includes an intelligent microprocessor, s ecure memory, and a dedicated network interface. This design makes iLO independe nt of the host serv[...]

64 HP ProLiant DL560 Server Maintenance and Ser vice Guide HP recommends using DNS/DHCP with iLO to simplify installation. If DNS/DHCP cannot be used, use the following procedure to disable DNS/DHCP and to configure the IP address and the subnet mask: 1. Restart or power up the server. 2. Press the F8 key when pro mpted during POST. The iLO RBSU ru[...]

Diagnostic Tools 65 ProLiant Essentials Rapid Deployment Pack The ProLiant Essentials Rapid Deploym ent Pack software is the preferred method for rapid, high-volume server deployments. The Rapid Deployment Pack software integrates two powerful product s: Altiris eXpress Deployment Server and the ProLiant Integration Module. The Altiris eXpress Depl[...]

66 HP ProLiant DL560 Server Maintenance and Ser vice Guide The ROMPaq utility checks th e system and provides a choice (if more than one exists) of available ROM revisions. This procedure is the same for both system and option ROMPaq utilities. For more information about the ROMP aq utility, refer to the HP website ( http://www.hp.com/servers/manag[...]

Diagnostic Tools 67 • • • • • Create and copy standard server configuration scripts using the SmartStart Scripting Toolkit and Configuration Replication Utility. Test server hardware using the Insight Diagnostics Utility. Update the latest system or optio n ROM using the ROM Update Utility. Install software drivers directly from th e CD. [...]

[...]

69 Specifications In This Section Server Dimensions and Weight ................................................................................................... . 69 Environmental Specifications ................................................................................................... .... 69 Hot-Plug Power Supply Calculations ..........[...]

70 HP ProLiant DL560 Server Maintenance and Ser vice Guide Relative humidity (noncondensing) Operating 10% to 90% Non-operating 5% to 95% NOTE: Storage maximum humidity of 95% is based on a maximum temperature of 45 ° C (113 ° F). Altitude maximum for storage corresponds to a pressure minim um of 70 KPa. Hot-Plug Power Supply Calculations For hot[...]

Specifications 71 Item Description Depth 130 mm (5.1 in) LEDs (front panel) Green = On Read/write capacity per diskette High density 1.44 MB Low density 720 KB Drives supported 1 Drive height One-third height Drive rotation 300 rpm Transfer rate High 500 Kb/s Low 250 Kb/s Bytes/sector 512 Sectors per track (high/low) 18/9 Tracks per side (high/low)[...]

72 HP ProLiant DL560 Server Maintenance and Ser vice Guide Item Description Capacity 550 MB (mode 1, 12 cm) 640 MB (mode 2, 12 cm) Block size 2368, 2352 bytes (mode 0) 2352, 2340, 2336, 2048 bytes (mode 1) 2352, 2340, 2336, 2048 bytes (mode 2) Dimensions Height 12.7 mm (0.50 inch) Depth 132.0 8 mm (5.20 inch) Width 132.08 mm (5.20 inch) Weight 0.34[...]

Specifications 73 Item Description Operating conditions Temperature 5°C to 45°C (41°F to 118°F) Humidity 5% to 90%[...]

[...]

75 Server Component Identification In This Section Front Panel Components ......................................................................................................... ..... 75 Front Panel LEDs and Buttons ..................................................................................................... 76 Rear Panel Components......[...]

76 HP ProLiant DL560 Server Maintenance and Ser vice Guide Item Description 1 SCSI hard drive bay 1 (SCSI ID 0) 2 SCSI hard drive bay 2 (SCSI ID 1) 3 Tape drive blank 4 Diskette drive 5 CD-ROM drive in Universal Media B ay Front Panel LEDs and Buttons Item Description Status 1 CD-ROM drive ejector button NA 2 UID LED button Blue = Activated Flashin[...]

Server Component Identification 77 Item Description Status 3 Internal health LED Green = Normal Amber = System degraded. Refer to system board LEDs to identify component in degraded state ("System Board LE Ds" on page 84 ). Red = System critical. Refer to system board LEDs to identify component in critical state ("System Board LEDs&q[...]

78 HP ProLiant DL560 Server Maintenance and Ser vice Guide Rear Panel Components Item Description Connector Color 1 Slot 1, 64-bit/133-MHz PCI-X, bus 3 N/A 2 Slot 2, 64-bit/100-MHz PCI-X, bus 6 N/A 3 Slot 3, 64-bit/100-MHz PCI-X, bus 6 N/A 4 NIC 1 RJ-45 connector N/A 5 NIC 2 RJ-45 connector N/A 6 Mouse connector Green 7 Keyboard connector Purple 8 [...]

Server Component Identification 79 Rear Panel LEDs and Buttons Item Description LED Color Status 1 RJ-45 activity LED Green On or flashing = Network activity Off = No network activity 2 RJ-45 link LED Green On = Linked to network Off = Not linked to network 3 Power supply LED Green On = Power turned on and power sup ply functioning properly Off = O[...]

80 HP ProLiant DL560 Server Maintenance and Ser vice Guide System Board Components Item Description Item Description 1 DIMM slots (1-6) 12 Processor socket 4 2 Smart Array 5i Plus Memory Module 13 System power connector 3 PPM slot 4 14 CD-ROM drive system connector 4 PPM slot 3 15 Diskette drive system connector 5 PPM slot 2 16 Power supply signal [...]

Server Component Identification 81 NMI Switch The NMI switch allows administrators to perform a memory dump before performing a hard reset. Crash dump analysis is an essential part of eliminating reliability problems, such as hangs or crashes in operating systems, device drivers, and applications. Many crashe s freeze a system, requiring you to do [...]

82 HP ProLiant DL560 Server Maintenance and Ser vice Guide Item Description 1 DIMM slot 1A 2 DIMM slot 2A 3 DIMM slot 3B 4 DIMM slot 4B 5 DIMM slot 5C 6 DIMM slot 6C System Maintenance Switch Position Default Function S1 Off Reserved S2 Off Off = System configuration can be changed. On = System configuration is locked. S3 Off Reserved S4 Off Off = [...]

Server Component Identification 83 Position Default Function S5 Off Off = Power-on password is enabled. On = Power-on password is disable d. S6 Off Off = No function. On = Clear NVRAM*. S7 Off Off = iLO security is enabled. On = iLO security is disabled. S8 Off Off = Processor hot-spare boot is enabled. On = Processor hot-spare boot is disabled. NO[...]

84 HP ProLiant DL560 Server Maintenance and Ser vice Guide System Board LEDs[...]

Server Component Identification 85 Item LED Description Status 1 Processor 1 failure Amber = Processor failed Off = Normal 2 Processor 2 failure Amber = Processor failed Off = Normal 3 Processor 3 failure Amber = Processor failed Off = Normal 4 Processor 4 failure Amber = Processor failed Off = Normal 5 Online spare memory Amber = Failover, online [...]

86 HP ProLiant DL560 Server Maintenance and Ser vice Guide Item LED Description Status 14 PPM 4 failure Amber = PPM failed Off = Normal 15 PPM 3 failure Amber = PPM failed Off = Normal 16 PPM 2 failure Amber = PPM failed Off = Normal 17 PPM 1 failure Amber = PPM failed Off = Normal 18 Fans (1 through 8) Green = Normal Off = Power off Amber = One or[...]

Server Component Identification 87 The front panel health LEDs indicate only the current hardware status. In some situations, Insight Manager 7 may report serv er status differently than the health LEDs because the software tracks more system attrib utes. System LED and Color Internal Health LED Color Status Processor failure, socket X (Amber) Red [...]

88 HP ProLiant DL560 Server Maintenance and Ser vice Guide System LED and Color Internal Health LED Color Status Red The minimum fan req uirements are not being met. One or more fans have failed or are missing. Online spare memory (Amber) Amber Bank X failed over to the online spare mem ory bank. SCSI Backplane Components Item Description 1 SCSI co[...]

Server Component Identification 89 Hot-Plug SCSI Hard Drive LEDs Item LED Description Status 1 Activity status On = Drive activity Flashing = High activity on the drive or drive is being configured as part of an array. Off = No drive activity 2 Online status On = Drive is part of an array and is currently working. Flashing = Drive is actively onlin[...]

90 HP ProLiant DL560 Server Maintenance and Ser vice Guide Hot-Plug SCSI Hard Drive LED Combinations Activity LED (1) Online LED (2) Fault LED (3) Interpretation On, off, or flashing On or off Flashing A predictive failure alert has been rec eived for this drive. Replace the drive as soon as possible. On, off, or flashing On Off The drive is online[...]

Server Component Identification 91 PCI Riser Cage LED Status On = system power connected Off = system power disconnected CAUTION: To prevent damage to the server or expans ion boards, power down the server and remov e all AC power cords before removing or installing the PCI riser cage. Remote Management Connector The 30-pin remote management connec[...]

92 HP ProLiant DL560 Server Maintenance and Ser vice Guide Hot-Plug Fans Item Description Fan Zone 1 Fan 1 Processor 2 Fan 2 Processor 3 Fan 3 Processor 4 Fan 4 Processor[...]

Server Component Identification 93 Item Description Fan Zone 5 Fan 5 Processor 6 Fan 6 Processor 7 Fan 7 Processor 8 Fan 8 Processor 9 Fan 9 Power supply 10 Fan 10 Power supply NOTE: For information on fan redundancy, refer to "Redun dant Hot-Plug Fan Option (on page 93 )." Redundant Hot-Plug Fan Option The server supports redundant hot-p[...]

94 HP ProLiant DL560 Server Maintenance and Ser vice Guide − In a nonredundant configuration, the BIOS performs an orderly shutdown if a fan failure occurs in the processor zone or power supply zone. In a redundant configuration, the BIOS performs an orderly shutdown if two fan failures occur in the processor zone or power supply zone. − The se[...]

Server Component Identification 95 Hot-Plug Fan LED Status Green = Operating normally Amber = Failed Off = No power[...]

[...]

97 deployment software 65 Index diagnostic t ools 61, 6 5, 66 dimensions, se rver 69 DIMM slot LE Ds 84, 86 DIMM slots 80, 81 DIMMs 8, 43, 70 A diskette bo ot control 82 diskette dri ve 8, 70, 75 AC power supply 8, 24 diskette drive connectors 80 access panel 7, 18 drive bays 75 Altiris eXpress Deploymen t Server 65 drive LEDs 8 9 ASR (Automatic Se[...]

98 HP ProLiant DL560 Server Maintenance and Ser vice Guide I ORCA (Option ROM Conf iguration for Arrays) 64 illustrated parts catalog 7 ove rtemperature LED 84, 86 iLO (Integrated Lights-Out) 63 , 78, 82 iLO RBSU (Inte grated Li ghts-Out ROM-Based Setup Utility) 63 P IML (Integrate d Management Log) 62 part numbers 7, 8 Insight Ma nager 7 62 part n[...]

Index 99 rear panel buttons 79 rear panel connectors 78 rear panel LEDs 79 Remote ROM Flash, Smart Components 66 removable me dia tray 51 removal and replacement proc edures 13 removing ser ver from rack 18 resetting the system 81 riser interloc k LED 84, 86 RJ-45 co nnectors 78 RJ-45 netw ork connector LE Ds 79 ROMPaq utility 66 S safety consider [...]