HP (Hewlett-Packard) MSM7XX manual

Pr oC ur v e 5400zl S wit che s Installati on an d Getting Started Guide Reference Guide for HP ProCurve MSM7xx Controller s CLI Pr oC urve M SM7xx Con tr olle rs CLI Refe renc e Gu ide[...]

[...]

HP ProCurve MSM7xx Controllers CLI Reference Guide[...]

Copyright and Disclaimer Notices © Copyright 2009 Hew lett-Packard Developm ent Company , L.P . The information contained he rein is subject to change without notice. This document contains propri etary information, which is protected by copyright. No pa rt of this document may be photocopied, reproduced, or trans lated into another language witho[...]

Contents In this Contents section, new to 5.3.x contexts and commands are preceded with an asterisk “*” and formatted in green like this: * new context * new command 1 Introduction About this guide ........................................................................................................... 1-2 Products covered ...................[...]

ping .......................................................................................................................... 2 -2 ps ............................................................................................................................. 2-3 quit ...............................................................................[...]

Config context .............................................................................................................. 2-9 * dhcp public ip default lease period .................................................................. 2-9 * dhcp public ip subnet........................................................................................[...]

web access interface gre .................................................................................... 2-15 web access lan ..................................................................................................... 2-15 web access vpn ..................................................................................................[...]

snmp-server trap sysl og-severity ....................................................................... 2-23 snmp-server ............... ........................................................................................... 2-23 snmp-server access port-1 .................................................................................. 2-23 [...]

soap-server ssl with client certificate ............................................................... 2-30 soap-server access interface gre........................................................................ 2-30 soap-server access lan ........................................................................................ 2-30 soap-server ac[...]

service controller ap authentication refresh-rate ............................................ 2-37 service controller ap authentication source file .............................................. 2-38 service controller ap authentication source local ........................................... 2-38 service controller ap authen tication source radiu[...]

active-directory check attribute ........................................................................ 2-45 active-directory check user access ................................................................... 2-45 active-directory d evice name ............................................................................. 2-45 active-directory d[...]

* authorize_net transaction key ........................................................................ 2-52 * ads presentation with frameset ...................................................................... 2-52 authentication http .............................................................................................. 2-52 authenticat[...]

Default Session profile context ................................................................................ 2-61 accounting interim update ................................................................................. 2-61 idle timeout ..........................................................................................................[...]

access-controlled virtual ap ............................................................................... 2-71 active ..................................................................................................................... 2-71 chargeable user identity .................................................................................[...]

pppoe unnumbered ............................................................................................. 2-81 ip nat outside sour ce static ................................................................................ 2-81 ip rip authentication key-chain .......................................................................... 2-82 ip rip[...]

wpa-psk ................................................................................................................. 2-91 authentication server requ est radius cui .......................................................... 2-91 dot1x session p age .............................................................................................. 2-[...]

html redirection ................................................................................................. 2-100 local nas id .......................................................................................................... 2-100 bandwidth .............................................................................................[...]

radius-server key 2 ............................................................................................ 2-108 radius-server message-au thenticator .............................................................. 2-108 radius-server name ............................................................................................ 2-108 radius-[...]

Syslog destination context ...................................................................................... 2-115 active ................................................................................................................... 2-115 logging facili ty ...................................................................................[...]

online time limi t ................................................................................................. 2-123 online time limi t ................................................................................................. 2-123 start time .............................................................................................[...]

contact ................................................................................................................ 2-131 location ...................... ......................................................................................... 2-131 product type ..................................................................................[...]

inherit untagged st p........................................................................................... 2-138 bridge protocol ieee vlan .................................................................................. 2-138 inherit vlan st p ..................................................................................................[...]

provisioning local mesh port............................................................................ 2-145 provisioning local mesh security ..................................................................... 2-145 provisioning local mesh security ..................................................................... 2-145 provisioning local me[...]

end ....................................................................................................................... 2-153 inherit .................................................................................................................. 2-153 RADIUS Profile c ontext ...................................................................[...]

* ingress traffic type .......................................................................................... 2-161 * mac authentication......................................................................................... 2-162 * mac filter list ................................................................................................[...]

Alphabetical list of commands In this alphabetical list, ne w to 5.3.x commands are preceded by an asterisk “*” and formatted in green like this: * command 2-xxx accept connec tion 2-159 access control 2-8 7 access controlled 2-12 7 access controlled 2-65 access controlled 2-71 access controlle r 2-35 access controlle r shared secret 2-34 acces[...]

* dhcp public ip subnet 2-9 dhcp relay 2-101 dhcp relay 2-17 dhcp relay access centralize d client s 2-18 dhcp relay access lan 2-18 dhcp relay acti ve 2-102 dhcp relay circuit id 2-102 * dhcp relay circuit id 2-17 dhcp relay extend internet port 2-18 dhcp relay remote id 2-102 * dhcp relay remote id 2-18 dhcp relay subnet 2-102 dhcp server 2-102 d[...]

inherit 2-159 inherit 8021x 2-137 inherit l3subnets 2-139 inherit local mesh qos 2-138 inherit sensor 2-136 inherit service av ailability 2-139 * inherit switch ports 2-139 inherit untagged stp 2-138 inherit vlan stp 2-138 initial discovery time 2-157 initial login time allocation 2-122 intercept traffic 2-67 interface 2-113 interface 2-144 interfa[...]

noc access interface vlan 2-5 4 noc access internet 2-52 noc access vpn 2-53 noc allow 2-53 noc authentication 2-53 noc ssl ca-certificate 2-59 noc ssl certificate 2-59 notify user loca tion changes 2-60 nslookup 2-2 ntp protocol 2-19 ntp server 2-19 ntp server 2-21 ntp server fai lure trap 2-21 online time limit 2-123 online time limit 2-123 outgo[...]

service controller ap authentic ation credentials 2-37 service controller ap authentic a tion ena ble 2-37 service controller ap authentic ation file 2-37 service controller ap authentication radius-server 2-37 service controller ap authentic ation refresh-rate 2-37 service controller ap authentic ation source file 2-38 service controller ap authen[...]

subscription plan name 2-123 * switch port 2-135 syslog 2-135 system accounting 2-51 termination action 2-68 top 2-3 traceroute 2-3 transmit key 2-90 transmit powe r 2-150 transport page 2-59 upstream diffserv ta gging 2-99 use access-list 2-56 use access-list unauth 2-56 * user 2-126 user defined attribute 2-69 * user name 2-125 user profile 2-42 [...]

Chapter 1: Introduction 1 Introduction Contents About this guide ........................................................................................................... 1-2 Products covered ................................................................................................... 1-2 HP ProCurve Product Naming .........................[...]

Introduction About this guide About this guide This guide explai ns how to work with the Command Line In terface (CLI) on HP ProCurve Networking MSM7xx Controllers. Products covered This guide covers the following pr oducts: Model Part MSM710 Access Co ntroller J9328A MSM710 Mobility Controller J9325A MSM730 Access Co ntroller J9329A MSM730 Mobilit[...]

Introduction About this guide Colubris name HP ProCurve name MAP-320R MultiService Access Point MSM310-R Access Point MAP-330 MultiServic e Access Point MSM320 Access Point MAP-330R MultiService Access Point MSM320-R Access Point MAP-330 AP+Sensor MultiService Access Point MSM325 Access Point with Sensor MAP-625 MultiServic e Access Point MSM422 Ac[...]

Introduction HP ProCurve Networking support Example Description end [force] Items enclosed i n square brackets are optional . Y ou can either include them or not . Do not include the brackets. In this exam ple you can either include “force” or omit it. firewall mode (high|low|none) Items enclosed in parenthesis and separated by a vertical line [...]

Introduction Online documentation Online documentation For the latest documentation, visit the HP ProCurve Networking manuals W eb page at: www .procurve.com/manuals . Configuring CLI support Using the service c ontroller management tool, open the CLI configurat ion page. Select Service controller >> Management > CLI . Use this page to ena[...]

Introduction Entering strings  SSH connections t o the CLI can be made on any active in terface. Support for each interface mu st be explicitly ena bled under Security .  The login credentials for SSH connections are the same as those defined under Manager account . By default, both username and password are set to admin . Note SSH logins alw[...]

Introduction Context hierarchy Context hierarchy CLI commands are grouped into functional cont exts. Th e following table show the context hierarchy and t he command used to switch from the parent co ntext: Context hierarchy Command to switch from parent context View context (This is the first context. No command is needed.) Enable context enable C[...]

Introduction Sample CLI session Sample CLI session This sample CLI session shows you how to set the W AN port to use a static IP address, disable NA T , and add an alternate IP addr ess. (The CLI prompt is show n in bold.) CLI> enable CLI# config CLI(config)# interface ip wan CLI(config-if-ip)# ip address 192.168.66.1/24 CLI(config-if-ip)# ip ad[...]

Chapter 2: CLI commands 2 CLI commands[...]

CLI commands V iew context Path: Vi ew This is the root of the command tree. arping Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl arping [ -AbDfhqUV] [ -c <count> ] [ -w <dead line> ] [ -s <source> ] -I <interface> <destination> Pings a destination on a device interface using ARP packets. enable Supported on: MSM7[...]

CLI commands ps Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ps Displays all running processes. quit Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl quit Quits the CLI. show license Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show license (eula | gpl | other) Displays license information. show logging filtered Supported on: MSM710 M[...]

CLI commands Enable context Path: View > Enable This context provides ac cess to various utilities. reboot device Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl reboot device Restarts the system. show certificate Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show certificate Display current certificates. show certificate binding Support[...]

CLI commands arping Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl arping [ -AbDfhqUV] [ -c <count> ] [ -w <dead line> ] [ -s <source> ] -I <interface> <destination> Pings a destination on a device interface using ARP packets. arp Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl arp [-evn] [-H <type> ] [- i[...]

CLI commands show bridge forwarding Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show bridge forwarding Show bridge f orwarding information. show dns cache Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show dns cache [ <serial> ] Show DNS cache entries. Specify a seri al number to display detailed information. show interfaces Suppo[...]

CLI commands show web content Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show web content Show all files inside the ac cess points detected nearby . show client log Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show client log [ <macaddr> ] Display client station log . Enter the MAC addre ss to display mo re details for a specifi[...]

CLI commands controlled network Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl controlled network (ap | group | base) [ <name> ] [ <mac> ] Create/use the co ntro lled network entity . show controlled network config Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show controlled network c onfig Print configuratio n for all C ontro[...]

CLI commands Config context Path: View > Enable > Config This is the root context fo r all configuration co mmands. dhcp public ip default lease period Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp public ip default le ase period <number> Sets the defaul t lease time for the DHCP public IP subnet pool. dhcp public ip subnet Su[...]

CLI commands factory settings Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl factory settings Resets the system configuratio n to factory default settings. interface ethernet Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl interface ethernet (port- 1|port-2) Switches to the specified Ethernet interface context. reboot device Supported on: MS[...]

CLI commands interface ip Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl interface ip (lan | wan) Switches to the specified IP interface context. interface pptp client-default Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl interface pptp client-def ault Switches to the PPTP clie nt interface cont ext. interface gre Supported on: MSM710 MSM7[...]

CLI commands mac list Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl mac list <name> Edit a MAC list. no mac list <name> Delete a MAC list by name. show mac list Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show mac list [ <name> ] Display current MAC list, or one list in det ail. ipsec policy Supported on: MSM710 MSM730[...]

CLI commands ip http port Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ip http port <number> Sets the port number to use f or H TTP access to the service controller . Parameters <number> Port number . Range: 1 - 65535. Descriptio n HTTP connectio ns made to this port are met wi th a warning and the browser is redirected to the sec[...]

CLI commands snmp-server trap web-login Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server trap web-logi n Send a trap each time an a dministrator login is accepted. no snmp-server trap web-l ogin Do not send a trap each time an administrator login is accepted. snmp-server trap web-logout Supported on: MSM710 MSM730 MSM750 MSM760 MSM765[...]

CLI commands web access internet-port Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl web access internet-port Enables access to the managemen t tool via the Internet port. no web access internet-po rt Blocks access to the management tool via the In ternet port. web access lan-port Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl web access la[...]

CLI commands no web access vpn Blocks access to the managemen t tool via a VPN connection. dhcp mode Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp mode (server | relay | none) Sets whether the service cont roller operates as a DHCP serv er or DHCP relay agent. dhcp server Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp server lan [...]

CLI commands no dhcp server controller discovery Do not send the l ist of controller IP addresses with DHCP answers. dhcp server logout html user Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp server logout html u ser Logout HTM L user upon discover request. no dhcp server logout htm l user Do not logo ut HTML user upon di scover request. [...]

CLI commands dhcp relay remote id Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp relay remote id <str ing> Sets the Option 82 remote ID. no dhcp relay remote id Clears the Option 82 remote ID. dhcp relay access centralized clients Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp relay access central ized clients Listen for DHC[...]

CLI commands clock auto adjust dst Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl clock auto adjust dst Automatically adjust clock for daylight savings changes. no clock auto adjust dst Do not automatically adjust clock for daylight savings changes. clock timezone Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl clock timezone <gmtdiff>[...]

CLI commands Parameters <day> Day of the month. Range 1 - 31. <weekday> W eekday . V alid values are: "sun", "mon", "t ue", "wed", "thu", "fri", "sat". <month> Month. V alid values are: "j an", "f eb", "mar", "apr", "[...]

CLI commands <following-date> Rule of the form: The first [W e ekday] on or after the [Day]th of [Month ] at [T ime]. <preceding-date> Rule of the form: T he first [W e ekday] on or before the [Day]th o f [Month] at [T ime]. ntp server Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ntp server <index><host> Adds a network[...]

CLI commands Parameters <time> T ime as hh:mm:ss. For example: 15:44:00. config-update uri Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl config-update uri <uri> Sets the URI where the se rvice controller will down load or upload the configurat ion file. no config-update uri Clears the configur ation fi le URI. config-update weekday[...]

CLI commands snmp-server trap syslog-severity Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server trap syslog-s everity Set the severity level of syslog messages that will trigger a trap. no snmp-server trap syslo g-severity Do not send this trap. snmp-server Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server Enables the SNMP[...]

CLI commands snmp-server contact Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server contact <emai l> Specifi es contact information. no snmp-server contact Deletes contact in formation. Parameters <email> Email address. snmp-server heartbeat period Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server heartbeat per [...]

CLI commands snmp-server readwrite Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server readwrite <co mmunity> Sets the read-write community string. no snmp-server readwrite Deletes the read-write community string. snmp-server trap Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server trap Enables support for SNMP traps . n[...]

CLI commands snmp-server trap link-state Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server trap link-sta te Send a trap when the link state changes on any interface. no snmp-server trap link- state Do not send this trap. snmp-server trap snmp-authentication Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server trap snmp-aut he[...]

CLI commands Parameters <name> Specifies th e name of the VLAN. snmp-server access interface gre Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server access interf ace gre <name> Enables access to SNMP via the specified GRE tunnel. no snmp-server access int erface gre <name> Removes access to SNMP via the specified GRE t[...]

CLI commands snmp-server trap satellite-unreachable Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server trap satellit e-unreachable Send a trap wh en a satellite cannot be reached. no snmp-server trap satel lite-unreachable Ignore unreachab le satellites. snmp-server user Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-server use[...]

CLI commands soap-server access port-1 Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl soap-server access port-1 Enables SOAP access on the downstream port. no soap-server access por t-1 Blocks SOAP access on the downstream port. soap-server access port-2 Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl soap-server access port-2 Enables SOAP a[...]

CLI commands soap-server http auth entication username Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl soap-server http authenti cation username Set the SOAP server HTTP authentication username. soap-server port Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl soap-server port <port number> Sets the port the service controller will use t[...]

CLI commands soap-server access vpn Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl soap-server access vpn Enables access to the managemen t tool via a VPN connection. no soap-server access vpn Blocks access to the managemen t tool via a VPN connection. snmp-server trap vpn-connection Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snmp-serve[...]

CLI commands firmware-update automatic Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl firmware-update automatic Enables scheduled firm ware upgrades. no firmware-update automa tic Disables scheduled firmware upgrade. The service controller ca n automatically retrieve and install firmwa re from a local or remote URL at preset times. By placing s[...]

CLI commands firmware-update weekday Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl firmware-update weekday ( everyday | monday | tuesday | wednesday | thursday | friday | saturday | sunda y) Sets the day when the scheduled firmw are upgrade will take place. snmp-server trap firmware-update Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl snm[...]

CLI commands no ip name-server dynamic Disables dynamic DNS assi gnment. ip name-server interception Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ip name-server intercepti on Intercepts all DNS requests from users an d relays them to configured servers. no ip name-server interce ption Process DNS requests addre ssed to this devic e only . ip [...]

CLI commands radius-server profile Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl radius-server profile <na me> Creates a new RADIUS profile or switch es to the RADIUS context with the specified profile name. no radius-server profile <name> Deletes the specified RADIUS profile. access controller Supported on: MSM710 MSM730 MSM750 MS[...]

CLI commands  ftp://host/pat h certificate ssl Supported on: MSM710 MSM730 MSM750 MSM760 certificate ssl <uri> <pa ssword> Loads a new SSL certificate usi ng the URI. MSM765zl session profile de fault Supported on: MSM710 MSM730 MSM750 session profile default Switches to the session profile context. MSM760 MSM765zl session profile Su[...]

CLI commands discovery protoc ol devi ce-id Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl discovery protocol device -id <name> Overwrite the device- id field of information packets (the service controller serial number is not used). no discovery protocol dev ice-id Do not overwri te the device-id f ield of inf ormat ion packets (use the [...]

CLI commands service controller ap auth entication source file Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl service controller ap aut hentication source file Enables the use of a file authentication source. no service controller ap authentication source file Disables the use o f a file authentication sour ce. service controller ap auth entica[...]

CLI commands no service controller dis covery interface lan-port Allow discovery on the LAN interface. service controller primary Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl service controller primar y Become the Primary service controller . no service controller pri mary Become a secondary service controller . service controller primary ip [...]

CLI commands bandwidth control internet-port low Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl bandwidth control int ernet-port low <min-tx-%> <min-rx-%> <max-tx-%> <max-rx-%> Sets the bandwidt h rates (Tx minimum, Tx maximum, Rx minimum, and Rx maximum ) for traffic classed as Low . bandwidth control internet-port max-[...]

CLI commands bandwidth control internet-port normal Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl bandwidth control interne t-port normal <min-tx-%> <min-rx-%> <max- tx-%> <max- rx-%> Sets the bandwidt h rates (Tx minimum, Tx maximum, Rx minimum, and Rx maximum ) for traffic classed as Normal. bandwidth control internet[...]

CLI commands show user profiles Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show user profiles [ <patt ern> ] Display current local users. show user profiles details Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show user profiles detail s <name> Display detailed inform ation about one user . user profile Supported on: MSM71[...]

CLI commands no dot1x reauth terminate Disabled this o p tio n to block client traffic dur in g re-authentication and only activate traffic again if authentication succeeds. dot1x supplicant timeout Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl 802.1x supplicant time-ou t <seconds> Sets the 802.1X su pplicant time-out. Parameters <sec[...]

CLI commands radius-serv er client Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl radius-server client Enable radius clients list . no radius-server client Disable radius clients list . radius-server local eap-peap Supported on: MSM710 MSM730 MSM750 MSM760 radius-server local eap-p eap Allow EAP-PEAP . no radius-server local ea p-peap Disallow [...]

CLI commands no radius-server ssid det ection nas-id Do not use NAS-ID for SSID detection. show radius-server Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl show radius-server Display current RADIUS server co nfiguration. active-directory check attribute Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active-directory check attribute <lda[...]

CLI commands active-directory group Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active-directory group <name> Create or go to an Active Directory group. no active-directory group <name> Remove an Ac tive Directory gr oup. active-directory group order Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active-directory group order [...]

CLI commands no user tracking Disable capture of usage data. user tracking destination Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl user tracking destination <host> Specify to where the detailed sy slog packets should be sent. user tracking filter Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl user tracking filter <fil ter> A [...]

CLI commands igmp proxy Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl igmp proxy Enable IGMP proxy . no igmp proxy Disable IGMP proxy . igmp proxy downstream interface Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl igmp proxy downstream int erface <interface> Set the downstre am IGMP port. igmp proxy upstream interface Supported on: [...]

CLI commands Access Controller context Path: View > Enable > Config > Access Controller All global access controller configuration takes place here. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. ads presentation Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ads presentation Enable ad vertisemen[...]

CLI commands This option enables users to acc ess the wireless network without reconfiguring their networking settings. For example , by default the service cont rol ler creates the wir eless network on the subn et 192.168.1.0. If a client station is pre-configured with the address 10. 10.4.99, it will still be able to connect to the service contro[...]

CLI commands system accounting Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl system accounting Enables RADIUS accounting support. no system accounting Disables RADIUS accoun t ing su pport. remember de lay Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl remember delay <number> Length of tim e to remember users. Users who retu rn later[...]

CLI commands authorize_net payment url Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl authorize_net payment url <string > Set the payment URL for the Au thorize.Net payment service. authorize_net transaction key Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl authorize_net transaction key <string> Set the transaction k ey for the[...]

CLI commands noc access vpn Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl noc access vpn Accept authentication requests on VPN connec tions. no noc access vpn Do not accept au thenticati on requests on VPN connections. noc allow Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl noc allow <ip address> / <mask> Adds an IP address or[...]

CLI commands noc access interface vlan Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl noc access interface vlan <name> Adds the specified VLAN to the list of interfaces th at authentication requ ests are accepted on. no noc access interface v lan <name> Removes the specif ied VLAN from the list of inte rfaces that authentication req[...]

CLI commands wispr login url Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl wispr login url <url> Specifies the WISPr login url assi gned to the service controller . no wispr login url Deletes the WISPr l ogin url assigned to the service controller . wispr logoff url Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl wispr logoff url <[...]

CLI commands  IP address or domain name (u p to 107 characters in length)  Subnet address. Include the network mask as follows: address/subnet mask For example: 192.168.30.0/24  Use the keyword all to match any address.  Use the keyword none if the protocol does not take an address range (ICMP for example). <port> Specify a specif[...]

CLI commands http proxy upstream Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl http proxy upstream <stri ng> Specifies the host:port of the HTTP Proxy Upstream server . no http proxy upstream Do not use an HTTP Proxy Upstream server . https ssl certificate Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl https ssl certificate <ur l&[...]

CLI commands ipass login url Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ipass login url <url> Specifies the URL of the IPass login page. The serv ice controll er will auto matically redire ct users with IPass clien t software to t his page. no ipass login url No IPass login URL. login error url Supported on: MSM710 MSM730 MSM750 MSM76[...]

CLI commands messages Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl messages <url> Specifies the URL of a new message file . no messages No new messages fi le. Use default. noc ssl ca-certificate Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl noc ssl ca-certificate <u rl> Specifies the URL of the certificate from the ce rtifica[...]

CLI commands welcome url Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl welcome url <url> Specifies the URL of a welcome page. no welcome url No welcome page. notify user lo cation changes Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl notify user location chan ges Notify RADIUS on location changes. no notify user location c hanges Do[...]

CLI commands Default Session profile context Path: View > Enable > Config > Default Session profile This context provides attr ibutes that define settings for user sessions. Most of these attributes can be overridden by addi ng settings to a user RADIUS account. In this context, all commands add an attribute to the list, in some cases (acc[...]

CLI commands maximum output octets Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl maximum output octets <va lue> Sets the maximu m output limit in octets fo r all users that do not have a specific limi t set in their profile. no maximum output octets Removes this attribute. maximum output packets Supported on: MSM710 MSM730 MSM750 MSM760 [...]

CLI commands session timeout Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl session timeout <number> Sets the default session timeout fo r all users that do not have a sp ecific limit set in their profile. no session timeout Removes this attribute. smtp redirection setup Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl <hostname> [...]

CLI commands smtp redirection Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl smtp redirection Enables SMTP pr oxy support. no smtp redirection Disables SMTP proxy support . 2-64[...]

CLI commands Session profile context Path: View > Enable > Config > Session profile end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. access controlled Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl access controlled Set profile as ’access controlled’. no access controlled Set profile as not ’[...]

CLI commands use arp polling interval Use the ARP polling interval. no use arp polling interv al Do not use the ARP polling interval. arp polling max count Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl arp polling max count <nu mber> Set the polling AR P count. use arp polling max count Use the polling ARP count. no use arp polling max c[...]

CLI commands no use idle timeout Removes this attribute. intercept traf fic Supported on: MSM710 MSM730 MSM750 intercept traffic T urn on legal traffic interce ption. no intercept traffic T urn off legal traffic interception. use intercept traffic Use legal traffic interception. no use intercept traffic Do not use legal traffic interception. MSM760[...]

CLI commands use nat one-to-one Use this attribute. no use nat one-to-one Do not use this att ribute. session profile Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl session profile <name> Change this profile’ s name. smtp redirection setup Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl smtp redirection setup <h ostname> [: <[...]

CLI commands user defined attribute Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl user defined attribute <name> : <type> : <vendor-i d> : <vendor-type> : <format> : <value> Add a new user defined attribute. no user defined attribute <descri ption> Add a new user -defined attribute. Parameters <name&[...]

CLI commands User Profile context View > Enable > Config > User Profile Use this context to mo dify settings for a specific user in th e local user list. Example plan and profile conf iguration usig CLI commands : subscription plan "silver " use online time limit online time limit 60 minutes restrictions no use initial login time[...]

CLI commands access controlled Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl access controlled Make this user access controlled. no access controlled Make this user not access controlled. access-controlled profile Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl access-controlled profile <name> Use this session profile for this accou n[...]

CLI commands chargeable user identity Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl chargeable user identity <id> Set the CUI. use chargeable user ident ity Use the CUI. no use chargeable user id entity Do not use the CUI. control method Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl control method (subscript ion | endtime | none) Ho[...]

CLI commands no max user sessions This user doesn ’t have a maxi mum concur rent sessions limi t. password Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl password <secret> Change the password for thi s user . regular profile Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl regular profile <name> Apply a non-ac profile. no regula[...]

CLI commands no subscription plan Delete a subscription plan. username Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl username <name> Change the name for this user . 2-74[...]

CLI commands Internet interface context Path: View > Enable > Config > Internet interface This context provides comman ds for configuring I n tern et. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. duplex Supported on: MSM710 MS M730 MSM750 MSM760 duplex (auto | half | ful l) Sets the du plex mode on[...]

CLI commands ipsec vlan interface Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ipsec vlan interface <nam e> Specifies which VLAN is used by IPsec. no ipsec vlan interface Do not use a VLAN for IPsec. 2-76[...]

CLI commands LAN interface context Path: View > Enable > Config > LAN interface This context provides comm ands for conf iguring LAN. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. duplex Supported on: MSM710 MS M730 MSM750 MSM760 duplex (auto | half | ful l) Sets the du plex mode on L AN. Parameters[...]

CLI commands ipsec vlan interface Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ipsec vlan interface <nam e> Specifies which VLAN is used by IPsec. no ipsec vlan interface Do not use a VLAN for IPsec. 2-78[...]

CLI commands W AN IP interface context Path: View > Enable > Config > W AN IP interface This context provides comman ds for config uring various IP-networking rela ted settings. pppoe client user Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl pppoe client user <username> <password> Sets the PPPoE username and password. no p[...]

CLI commands ip nat Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ip nat Enables Networ k Address T ranslation. no ip nat Disables Network Address T ranslation. nat limit port range Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl nat limit port range Reserves a range of TCP and UDP ports for each user starting at port 5000. no nat limit por[...]

CLI commands no pppoe auto-reconnect The service controller will not au to matically attempt to reconn ect if the connection is lost. pppoe mru Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl pppoe mru <bytes> Specifi es the maximum receive unit . Changes to th is parameter should onl y be made according to the recommendations of your ISP [...]

CLI commands <internal addr> IP address of the device on the internal network that traffi c will be routed to. <internal-port> The protocol port n umber that the incoming t raffic will be mapped to. ip rip authentication key-chain Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ip rip authentication key -chain <name> Specifies [...]

CLI commands ip address alternate Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ip address alternate <ip address> [ <ip add ress> ] Assigns an alternate IP addresses to the Internet p ort. The address must be valid on the Internet. no ip address alternate < ip address> [ <ip address> ] Deletes the specified alternate IP[...]

CLI commands LAN IP interface context Path: View > Enable > Config > LAN IP interface This context provides commands for configurin g various IP-networking related sett ings for the LAN interface. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. ip address Supported on: MSM710 MSM730 MSM750 MSM760 MSM7[...]

CLI commands no router rip Disable RIP . 2-85[...]

CLI commands RADIUS remote configuration context Path: View > Enable > Config > RADIUS remote configuration end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active Use a RADIUS server to fetch con figuration informati on for the public access ne[...]

CLI commands V irtual AP context Path: View > Enable > Config > Virtual A P This context provides comman ds for configuring V irtual AP profiles (V AP (VSC)s). By default one profile exists with the name "". This is the de fault profile an d cannot be deleted. The following example shows how to add a new V AP (VSC) with egress ma[...]

CLI commands force centralize data Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl force centralize data Force centralization of wireless client traffic when the AP is L2 connected to the LAN port of t he service contro ller . no force centralize data Automatically determ ine if centralization of wireless client traffi c is required. ingress int[...]

CLI commands max-association Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl max-association <stations > Sets the ma ximum number of clients stations that can associate with this V AP (VSC). <stations> Number of client stations. Range: 1 - 255. ssid name Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ssid name <name> Specif[...]

CLI commands ascii ASCII keys are much we aker than carefully chosen hex keys. Y ou ca n include ASCII characters between 32 and 126, inclusive, in the key . However , note that not all cli ent s tations support non-alphanumeric characters such as spaces, punctuatio n, or special symbols in the key . transmit key Supported on: MSM710 MSM730 MSM750 [...]

CLI commands wpa-psk Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl wpa-psk <key> Sets the WP A presha red key . no wpa-psk Deletes the WP A preshared key . Parameters <key> Specify a key that is betw een 8 and 63 alphanumeric characters in length. It is recommended that the preshared key be at least 20 characters long, and be a mix[...]

CLI commands wireless filters mac Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl wireless filters mac <mac> Sets the MAC address of the upst ream device to send traffic to. no wireless filters mac < mac> Deletes the MAC address of the upst ream device to send traffic to. wireless filters rule input Supported on: MSM710 MSM730 MSM750[...]

CLI commands wireless filters type Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl wireless filters type (ma c | gateway | rules) Sets the type of wireless security filter to use. Parameters mac T r affic is forwarded to an upstream device with a specific MAC address. W ireless security filters use the default definiti ons. gateway T raffic is f[...]

CLI commands mac authentication accounting Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl mac authentication accoun ting Enables RADIUS accounting for this V AP (VS C). no mac authentication acc ounting Disables RADIUS accounting for this V AP (VSC). mac authentication acco unting radius profile Supported on: MSM710 MSM730 MSM750 MSM760 MSM765z[...]

CLI commands mac authentication local Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl mac authentication local Sets MAC-based auth entication to use the local us er list to validate the MAC addresses of c lient stations. no mac authentication loc al Do not use the local user list for MAC-based authentic ation. mac authentication Supported on: MS[...]

CLI commands html authentication active-directory Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl html authentication activ e-directory Use Active Directory (AD) to authenticate users. no html authentication ac tive-directory Do not use Active Directory (AD) to authenticate users. html authentication local Supported on: MSM710 MSM730 MSM750 MSM7[...]

CLI commands active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active Enable this V AP (VSC). no active Disable this V AP (VSC). beacon dtim count Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl beacon dtim count <number> Defines the DTIM period in the beacon. Client stations u se the DTIM to wake up from l ow-power mode to receive[...]

CLI commands no access lan stations Blocks traffic exchange between wi reless and LAN stations. fast authentication Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl fast authentication Enables WP A2 opportunistic key caching. no fast authentication Disables WP A2 opportunistic key caching. layer3 mobility Supported on: MSM710 MSM730 MSM750 MSM760[...]

CLI commands no qos Disables QoS for this profile. Four traffic queues are provided based on the WME standard. In order of priority , these queues are:  1: V oice traffic  2: Video traffic  3: Best effort data traffic  4: Background da ta traffic Each QoS priority mechanism maps tr affic to one of the four traffic queues. Client stat io[...]

CLI commands wmm advertising Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl wmm advertising Enables WMM informati on element advertising. no wmm advertising Disables WMM informatio n element advertising. html redirection Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl html redirection Enables support f or HTML logins . no html redirection Di[...]

CLI commands radius accounting realms Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl radius accounting realms Use RADIUS accounting realms. no radius accounting real ms Do not use RADIUS accounting realms. radius authen ti cation realms Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl radius authentication rea lms Use RADIUS authentication re[...]

CLI commands dhcp relay active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp relay active The dhcp relay is enab led on th e V AP (VSC). no dhcp relay active The dhcp relay is not enabled on the V AP (VSC). dhcp relay circuit id Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp relay circuit id <st ring> Sets the Option 82 cir[...]

CLI commands no dhcp server dns Reset the domain name server provided to DHCP clients. dhcp server gateway Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dhcp server gateway <ip a ddress> Sets the default gateway provided to DHCP clients. no dhcp server gateway Reset the default gateway pr ovided to DHCP clients. dhcp server range Support[...]

CLI commands Parameters none wep 802.1x wep static-wep wpa psk radius v1,v2 No wireless security . This option enables support for wire less users with W EP client software. This option enables support for wireless users with 802.1X client software. The service controller supports 802.1x client software that uses EAP-TLS, EAP-TTLS, EAP-SIM, and PEA[...]

CLI commands VLAN interface context Path: View > Enable > Config > Internet interface > VLAN interface View > Enable > Config > LAN interface > VLAN interface This context provi des commands for configuring V irtual LANs (VLANs). In this co ntext, VLANs can be added or edited. For example, to create a new VLAN interface name[...]

CLI commands vlan name Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl vlan name <name> Change the name of this VLAN interface. ip default-gateway Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl ip default-gateway <ip ad dress> Sets the default gatewa y for this VLAN. no ip default-gateway Removes the default gateway for thi s VLA[...]

CLI commands RADIUS context Path: View > Enable > Config > RADIUS This context provides commands for configuring RADI US profiles. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. radius-server accounti ng port Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl radius-server accounting port <number&[...]

CLI commands radius-server deadtime Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl radius-server deadtime <s econds> Sets the retry interval for access a nd accounting requests that time-out. If no reply is received within this interval, th e servi ce controller swit ches between the primary and secondary RADIUS servers (if defined). If a[...]

CLI commands radius-server na sid Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl radius-server nasid <id> Sets the network access serve r ID you wa nt to use for the service controller . By default, the seri al number of the service controller is used. The service c ontroller includes th e NAS-ID attribute in all packets that it sends to [...]

CLI commands DHCP server context Path: View > Enable > Config > DHCP server This context lets you conf igure DHCP server settings. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active This range is enabled. no active This range is not enabled[...]

CLI commands GRE interface context Path: View > Enable > Config > GRE interface Details of the GRE interface. end force Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end [force] Quits the GRE context. gre name Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl gre name <name> Renames the current GRE interface. ip address Support[...]

CLI commands IPsec policy context Path: View > Enable > Config > IPsec policy This context allows editing of IPSec configuration settings. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active Enables policy . no active Disables policy . authe[...]

CLI commands no dns server Resets the DNS server for this policy . incoming nat Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl incoming nat Enables NA T for incoming traf fic. no incoming nat Disables NA T for incoming traffic. incoming traf fic network Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl incoming traffic network <ip address&g[...]

CLI commands peer ip address Supported on: MSM710 MSM730 MSM750 MSM760 peer ip address ( <ip address> | an y ) Set the peer ip address for th is policy . MSM765zl perfect forward secrecy Supported on: MSM710 MSM730 MSM750 perfect forward secrecy Enable PFS. no perfect forward secrec y Disable PFS. MSM760 MSM765zl preshared key Supported on: M[...]

CLI commands Syslog destination context Path: View > Enable > Config > Syslog destination This context provides commands for confi guring Syslog destination s. active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active Enables loggi ng to the current destination. no active Disables logging to the c urrent destination. logging facilit[...]

CLI commands end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. level Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl level Enables filtering of the lo g file by severity level. no level Disables filtering of the lo g file by severity level. level Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl level (lower[...]

CLI commands no message Disables filterin g of th e log file messa ge field. message Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl message (matches | notmat ches) <regex> Use this filter to include log messages. Use a regu lar expression to define the match criteria for the log file message field. no message Disables filterin g of th e l[...]

CLI commands PPTP client interface context Path: View > Enable > Config > PPTP client interface This is the PPTP client context . active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active Sets PPTP client connection to ’up’. no active Sets PPTP client connection to ’down’. pptp client credentials Supported on: MSM710 MSM730 [...]

CLI commands pptp client auto route discovery Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl pptp client auto route di scovery Enables auto-r oute discovery . no pptp client auto route discovery Disables auto-route discovery . pptp client lcp echo Supported on: MSM710 MSM730 pptp client lcp echo Enables PPTP LCP echo. no pptp client lcp echo Di[...]

CLI commands Keychain context Path: View > Enable > Config > Keychain Manage a keychain: a collection of keys. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end End current context. key Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl key <number> Enter new key . no key <number> Delete key with given ID. key chain na[...]

CLI commands Keys context Path: View > Enable > Config > Keychain > Keys Edit a key , as pa rt of a keychain. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end End current context. key-string Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl key-string <name> Set the authentication string for this key . no key-string Rem[...]

CLI commands Subscription plan context Path: View > Enable > Config > Subscription plan Details about a subscripti on plan. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end End current context. daily restriction Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl daily restriction <from> <to> Sets the daily restricti o[...]

CLI commands online time limit Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl online time limit Use the online tim e limit. no online time limit Do not use the onl i n e time limit. online time limit Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl online time limit <number> (minut es | hours | days) Sets the initial onli ne time for an[...]

CLI commands no public ip subnet Removes this attribute. use public ip subnet Use this attribute. no use public ip subnet Do not use this attri bute. 2-124[...]

CLI commands SNMP user context Path: View > Enable > Config > SNMP user This context provides commands for configuring SNMP user . access level Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl access level (read-only | read-write) Specifies the access level for this SN MP user . end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end [...]

CLI commands SNMP notification receiver context Path: View > Enable > Config > SNMP notification receiver This context provides co mmands for confi guring SNMP notificati on receiver . community Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl community <community> Specifi es the community f or this SNMP notifi cation rece iver . e[...]

CLI commands Active Directory Group context Path: View > Enable > Config > Active Directory Group Contains informat ion about attr ibutes to send when a user is related to an Act ive Directory group. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. access controlled Supported on: MSM710 MSM730 MSM750 M[...]

CLI commands active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl active Enable this user account. no active Disable this user account. active-directory group name Supported on: MSM710 MSM730 MSM750 MSM760 active-directory group name <name> Change th e name for thi s user . MSM765zl egress vlan Supported on: MSM710 MSM730 egress vlan <[...]

CLI commands use regular virtual ap Use only allowed Virtual APs (VSCs) for this profile. no use regular virtual ap Use any Virtual AP (V SC) for this profile. 2-129[...]

CLI commands Controlled Network AP context Path: View > Enable > Controlled Network AP Contains commands f or controlled network AP confi g urati o n . end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Switches to parent context. execute action Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl execute action (synchroni ze | accept-s[...]

CLI commands contact Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl contact <name> Modify th e contact. location Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl location <name> Modify t he location. product type Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl product type (map-320 | m ap-330 | map-625 | map-630 | msm410 | msm [...]

CLI commands Controlled Network AP Group context Path: View > Enable > Controlled Network AP Group Contains commands f or controlled network AP Group con figuration. execute action Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl execute action (synchroni ze | accept-suspicious | accept-product | rediscover) Execute an action on the entity?[...]

CLI commands Controlled Network Base Group context Path: View > Enable > Controlled Network Base Group Contains command s for controll e d network Base Group co nfiguration. execute action Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl execute action (synchroni ze | accept-suspicious | accept-product | rediscover) Execute an action on the[...]

CLI commands Controlled Network context Path: View > Enable > Controlled Ne twork AP > Controlled Network View > Enable > Controlled Networ k AP Group > Controlled Network View > Enable > Controlled Networ k Base Group > Controlled Network Contains commands f or controlled network config uration. end Supported on: MSM710 [...]

CLI commands switch port Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl switch port <name> Switch to the ethernet port context. syslog Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl syslog Switch to syslog context. sensor server name Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl sensor server name <name> Sets the IP address[...]

CLI commands  If there are any firewalls between the service co ntroller and the RF Manager Server , then TCP and UDP ports 3851 must be open bi directionally .  If using the hostname option, an entry must be cr e ated on the network DNS server that points to the IP address of the RF Ma nager Server .  If using the Server ID opti on, suppo[...]

CLI commands dot1x reauth period Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dot1x reauth period (15m | 30m | 1h | 2h | 4h | 8h | 12h) Sets the 802.1X reauthenti cation interval. Client st ations must reauthentica te when this interv al expires. dot1x reauth terminate Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dot1x reauth terminate [...]

CLI commands inherit untagged stp Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl inherit untagged stp Inherit unta gged spanning tree protoc ol settings from pare nt. no inherit untagged stp Do not inherit untagged spanning tree protocol settings fr om parent. bridge protocol ieee vlan Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl bridge p[...]

CLI commands local mesh qos mechanism Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl local mesh qos mechanism (disabled | 802.1p | very _high | high | normal | low | diffsrv | tos | ip_qos) Set the QoS priority mechanism. enable vsc services Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl enable vsc services Enable wireless servic es when th[...]

CLI commands no inherit switch ports Inherit settin gs from the switch ports. 2-140[...]

CLI commands V irtual AP Binding context Path: View > Enable > Controlled Netw ork AP Group > Virtual AP Binding Configurati on for V AP Bindings dual radio binding Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dual radio binding (radio 1 | radio2) Enables radio binding. no dual radio binding (ra dio1 | radio2) Disables radio binding.[...]

CLI commands Syslog context Path: View > Enable > Controlled Network AP > Controlled Network > Syslog View > Enable > Controlled Network AP Gro up > Controlled Network > Syslog View > Enable > Controlled Network Ba se Group > Controlled Network > Syslog Set basic configuration for entity’ s logging. message Sup[...]

CLI commands no level Disables filtering of the lo g file by severity level. Parameters debug Debug-level messages. info Informational messages. notice Normal, but significant condition. warning W arnin g conditions. error Error conditions. critical Critical conditio ns. alert Action must be taken immediat ely . emergency System is unusable. level [...]

CLI commands Provisioning connectivity context Path: View > Enable > Controlled Network AP > C ontrolled Network > Provisioning connectivity View > Enable > Controlled Network AP Group > Controlled Network > Pr ovisioning connectivity View > Enable > Controlled Network Base Group > Controlled Network > Pr ovision[...]

CLI commands vlan Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl vlan <id> Set the provisioning vlan i d . no vlan Disable use of the provisioning vlan. static ip Supported on: MSM710 MSM730 MSM750 MSM760 static ip <ip> <netmask> <gateway > Set the static IP address. MSM765zl provisioning local mesh group Supported on: M[...]

CLI commands no provisioning local mes h security Disable the use o f local mesh securit y . provisioning local mesh type Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl provisioning local mesh t ype (a | b | g | bg) Set the wireless mode for loca l mesh . country code Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl country code <code> [...]

CLI commands Provisioning discovery context Path: View > Enable > Controlled Network AP > C ontrolled Network > Provisioning discovery View > Enable > Controlled Network AP Group > Controlled Network > Provisioning discovery View > Enable > Controlled Network Base Group > Controlled Network > Provisioning discove[...]

CLI commands dns server Supported on: MSM710 MSM730 MSM750 dns server <ip> Add a DNS server to the list. no dns server <ip> Delete a DNS server from the list. MSM760 MSM765zl discovery provisioning Supported on: MSM710 MSM730 MSM750 discovery provisioning Enable discovery provi sioning. no discovery provisioning Disable discovery provi [...]

CLI commands CN W ireless interface context Path: View > Enable > Controlled Network AP > C ontrolled Network > CN W ireless in terface View > Enable > Controlled Network AP Group > Controlled Network > CN W ireless interface View > Enable > Controlled Network Base Grou p > Controlled Network > CN W ireless inter[...]

CLI commands If you have installed multiple servic e controllers, reducing the receiv er sensitivity of the service controller from its maximum will help to reduc e the amount of crosstal k between the wireless stations to better suppor t roaming clients. By reducing the recei ver sensitivity , client stations will be more likely to connect with th[...]

CLI commands dot11 automatic transmit-power Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dot11 automatic transmit- power Enables auto matic transmi t power selection . no dot11 automatic transm it-power Disables automatic transmit power selecti on. dot11 automatic transm it-power period Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dot11[...]

CLI commands This is a global setting that is useful when creating wireless links to remote sites. However , it also applies to all wi reless connection made wi th the radio, not just for wireless links. Therefore, if you are also using the radio to serve local wireless clie nt stations, adjusting this settin g may lower the performance for clients[...]

CLI commands no radio active Disables the radio. spectralink view Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl spectralink view Enable the use of spectralink view . no spectralink view Disable the use of spectralink view . dot11n guard interval Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dot11n guard interval (sh ort | long) Select the[...]

CLI commands no inherit Do not inherit settings from parent. 2-154[...]

CLI commands RADIUS Profile context Path: View > Enable > Controlled Network AP > Controlled Networ k > RADIUS Profile View > Enable > Controlled Network AP Gr oup > Controlled Network > RADIUS Profile View > Enable > Controlled Network Base Group > Controlled Network > RADIUS Profile Basic per entity RADIUS Pro [...]

CLI commands Local mesh profile context Path: View > Enable > Controlled Network AP > Controlled Network > Local mesh pr ofile View > Enable > Controlled Network AP Gro up > Controlled Network > Local mesh profile View > Enable > Controlled Network Base Grou p > Controlled Network > Local mesh pr ofile Configurat[...]

CLI commands mesh id Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl mesh id <id> Set the local mesh g roup id. allowed downtime Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl allowed downtime <number> Set the allowed downtime for a co nnection (or a link) to a peer . minimum snr Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl[...]

CLI commands inherit Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl inherit Inherit settings fro m parent. no inherit Do not inherit settings from parent. name Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl name <name> Renames the current local mesh group. radio active Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl radio active (r[...]

CLI commands Local mesh provisioning profile context Path: View > Enable > Controlled Network AP > Contro lled Network > Local mesh provisioning profile View > Enable > Controlled Network AP Group > Controlled Network > Lo cal mesh provisioning profile View > Enable > Controlled Network Base Group > Controlled Netwo[...]

CLI commands Switch port context Path: View > Enable > Controlled Network AP > Controlled Networ k > Switch port View > Enable > Controlled Network AP Group > Controlled Network > Switch port View > Enable > Controlled Network Base Group > Controlled Network > Switch port Switch port configuration. Note The comma[...]

CLI commands no dot1x authentication Disable support f or IEEE802.1X. dynamic vlan Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl dynamic vlan Enable dynamic VLAN. no dynamic vlan Disable dynamic VLAN. egress rate Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl egress rate <(128k|256k|5 12k|1m|2m|4m|8m|16m|32m)> Set the maximum rate at[...]

CLI commands mac authentication Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl mac authentication Enable support for MAC-based authenti cation. no mac authentication Disable suppor t for MAC- based authentication. mac filter list Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl mac filter list <name> Accept MAC addresses set in the se l[...]

CLI commands priority lookup Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl priority lookup (diffsrv | 802.1p | any) Choose the por t priority looku p. use priority lookup T urn on priority lo okup for this port. no use priority lookup T urn on priority lo okup for this port. quarantine vlan Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl qu[...]

CLI commands List of MAC addresses context Path: View > Enable > Config > List of MAC addresses Use to modify a list of MAC addresses. end Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl end Go to previous context. entry Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl entry <mac> Adds a new entry to the list. no entry <mac&g[...]

[...]

Pr oC ur v e 5400zl S w itc hes Inst allation an d Getting S tart d Gui de T echnology for bet ter business outcom es T o learn m or e , visit ww w .hp .com/go/pr oc ur v e/ © Cop yri ght 2009 Hewle t t-P ack ar d De velopmen t Company , L.P . The inf ormatio n contained her ein is su bject to change without noti ce. The only war ranties f or HP p[...]