Hunter Fan TYPE manual

T ype 7 Models T ype 7 Models T ype 7 Models Form# 45084-01 20120117 ©2012 Hunter Fan Co. For Y our Records and W arranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. ____________________________[...]

2 45084-01 • 01/17/12 • Hunte r Fan Company T ab le Of Contents 1 • Getting Ready ...................... 6 2 • Installing the Hanger Brack et ....... 7 3 • Ass embling and Hanging the Fan ... 8 5 •Wiring the Fan ...................... 10 6 • Installing the Canopy and Canopy T rim Ring .............................. 11 7 • Ass emblin[...]

3 45084-01 • 01/17/12 • Hunte r Fan Company Pr eparin g th e F an S it e 7’ Minimum Blades to Flo or 9’ Minimum Ceiling Height 30” From W all or Nea rest Obstruction St ep 1 - Ch oo se th e F an Site Proper ceiling fan loc ation and at tachment to the building struct ure ar e ess ent ial for safety, r eliable operation, maximum eciency[...]

4 45084-01 • 01/17/12 • Hunte r Fan Company Pr epa ring th e F an Sit e ( continu ed) C AU TI O N : All wiring must b e in accordance wi th national and local electrical cod es and ANSI/NFP A 70. If you are unfamiliar with wiring, use a qualied elec trician. Steps 2 – 3 Step 4 Step 5 St ep 2 - Cut th e Ce ilin g Hole 2-1. Locate the site f[...]

5 45084-01 • 01/17/12 • Hunte r Fan Company Ins t aller ’ s Choice a nd O ptional Acc ess orie s Understan ding Mountin g and Instal ler’ s C hoic e ® Hunte r ’ s patent ed 2-p osition mounting sys tem pro vides you ma ximum installation exibility and ease . Y ou can install your Hunter fan in one of two ways, dep ending on ceiling he[...]

6 45084-01 • 01/17/12 • Hunte r Fan Company Installing M ultiple Fans? If you are ins talling more than one fan, keep the fan blades and blade irons (if applicable) in s ets , as they were shipped. T o install a ceiling fan, be sure you can do the following: • Loc ate the c eiling joist or other suitable suppor t in ceiling. • Drill hole s [...]

7 45084-01 • 01/17/12 • Hunte r Fan Company 2-1. Drill two pil ot holes into the woo d suppor t structur e thr ough the outermost holes in the outlet box. e pilot ho les should b e 9/64” in diamete r . No te: Y our fan comes with four pre-ins talle d neoprene noise iso lator s . 2-2. read the lead wir es from the outlet box down thr oug[...]

8 45084-01 • 01/17/12 • Hunte r Fan Company 3-1. T o ass emble f an to hang down from a at or angled ceiling, place the canopy and canopy trim ring around t he adapter so that they rest on the fan assembly . 3-2. Feed the wires from the fan thr ough the downrod. No te: Make sure all the wir es are on the same side of the metal dowel pin insi[...]

9 45084-01 • 01/17/12 • Hunte r Fan Company 4 • S ec urin g F an to Se c ondar y Supp ort System 4-1. Loos en the two nuts on the wire clamp. Slide the clamp open. 4-2. Insert the end of the braided c able through the ceiling plat e and one of the holes in the outlet box into the c eiling . 4-3. Access the support b race in the ceiling. Y ou [...]

10 45084-01 • 01/17/12 • Hunte r Fan Company All wiring must b e in accorda nce with national and lo cal ele c trical code s and ANSI/NFP A 70. If you are unfamiliar with wiring , u se a qualified electrician. W all swit ches are not included. Sele ct an acceptable general-use switch in accordanc e with nat ional and lo cal electrical co des .[...]

11 45084-01 • 01/17/12 • Hunte r Fan Company 6-1. Partially install two canopy s crews (about 2 full turns) in the hanger bra cket. 6-2. Rais e the canopy over the hange r bracket. Align partially installed screws with key slots in canopy . 6-3. T wist canopy clo ckwise to secure. 6-4. Install third & fourth canopy screw in round hole on ca[...]

12 45084-01 • 01/17/12 • Hunte r Fan Company Y ou have the option of installing thr ee blades o r six blades on your fan. Install one blad e iron for thr ee blades and t wo blade irons for six. 7-1. Remove the blade mounting screws and rubber shipping bumpers from the motor . 7-2. Attach a blade iron t o the fan with thr ee bla de mounting scre[...]

13 45084-01 • 01/17/12 • Hunte r Fan Company 8-1. T o attach the upper switch housing, par tially install #6-32 machine screws into t he switch housing mounting plat e. 8-2. Align the keyhole slots in the housing with the machine screws. 8-3. T urn the housing counter clockwise until the machine assembly s crews ar e rmly situa ted in the na[...]

14 45084-01 • 01/17/12 • Hunte r Fan Company After r emoving the con trol from t he b ox, shut o p ower to t he room you will b e working in at the br eaker box. Caution: Do no t rest ore power until all work is c omplete. 9-1. Pull the k nob o of the spe ed contr ol unit and remove your exi sting switc h from the switc h box . 9-2. Conne[...]

15 45084-01 • 01/17/12 • Hunte r Fan Company In warm weather , use downward air ow patt ern In cold weather , us e upward air ow pattern 10-1. T urn on electrical p ower to the fan. 10-2. e knob on the wall cont rol unit cont rols power to the fan. e fan has three spee d settings in se quence: High, Low and O . 10-3. Ceiling fans[...]

16 45084-01 • 01/17/12 • Hunte r Fan Company Problem: No thing happens; f an do es no t move. 1. T urn power on, replace fuse , or reset break er . 2. Lo osen c anopy , check all connections accor ding to the wiring the fan s ec tion. 3. Remove the shipping bump ers. Problem: Noisy oper ation. 1. Tight en the blade ass embly screws and blade ir[...]