Husqvarna 236E manual

235e, 236e 240e, 240e T rioBr ak e EN Operator's Manual, 6-23 ES Manual de instrucciones, 24-43 SE Bruksanvisning, 44-61 FI Käyttöohje, 62-79 DK Brugsanvisning, 80-97 NO Bruksanvisning, 98-115 IT Istruzioni per l’uso, 116-135 PT Instruções para o uso, 136-156 GR ∂Á¯ÂÈÚ›‰ÈÔ ÃÚ‹Û˘ , 157-179 CZ Návod k pouÏití , 180-[...]

2 1153140-26 Rev . 2 2010-02-11 28 27 29 9 14 13 12 11 2 6 4 3 8 10 5 7 24 23 22 21 20 19 18 17 16 15 1 1 30 A A 2 6 10 3 7 4 8 5 9 B E 11 25 26 12 13 11 240e T rioBrake A B C[...]

3 1153140-26 Rev . 2 2010-02-11 OFF HALF FULL 14 21 27 15 22 28 17 23 29 16 18 24 19 25 20 26 30 31 32 A[...]

4 1153140-26 Rev . 2 2010-02-11 9 4 3 10 5 7 6, 8 2 33 34 36 38 35 37 40 1 2 1 2 1 3 Retreat path Retreat path Danger zone D anger zone F elling Direct io n Danger zone 39 41 42[...]

5 1153140-26 Rev . 2 2010-02-11 44 43 A A 1 3 2 45 49 46 50 48 47 51 52 240e T rioBrake[...]

INTRODUCTION 6 – English 1153140-26 Rev . 2 2010-02-11 Dear Customer , Congratulations on your choice to b uy a Husqvar na product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvar na River , for production of musk ets. The location was logic[...]

INTRODUCTION / CONTENTS English – 7 1153140-26 Rev . 2 2010-02-11 What is what on the chain sa w? (1) 1 Product and ser ial number plate 2 Throttle lockout (Pre vents accidental operation of throttle control.) 3 Front handle 4 Cylinder cover 5 Front hand guard 6 Muffler 7 Spike bumper 8 Bar tip sprocket 9 Rear handle with r ight hand guard 10 Th[...]

GENERAL SAFETY PRECA UTIONS 8 – English 1153140-26 Rev . 2 2010-02-11 Before using a ne w chain saw • Please read this manual carefully . • (1) - (51) refer to figures on p . 2-5. • Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly . • Refuel and star t the chain saw . See the[...]

GENERAL SAFETY PRECA UTIONS English – 9 1153140-26 Rev . 2 2010-02-11 increase your saf ety and efficiency . Visit your dealer regularly to see whether you can benefit from new features that hav e been introduced. P ersonal protective equipment • Approved protectiv e helmet • Hearing protection • Protective goggles or a visor • Glov es [...]

GENERAL SAFETY PRECA UTIONS 10 – English 1153140-26 Rev . 2 2010-02-11 Will m y inertia activated chain brake alwa ys activate during kickbac k in the event of a kic kback? No . First your brake must be in working order . T esting the brake is simple , see instructions under the heading Checking, maintaining and servicing chain saw safety equipme[...]

GENERAL SAFETY PRECA UTIONS English – 11 1153140-26 Rev . 2 2010-02-11 General rules • Only use cutting equipment recommended by us! See instructions under the heading T echnical data. • Keep the chain’ s cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge. A damaged or badly shar pened chain increa[...]

GENERAL SAFETY PRECA UTIONS 12 – English 1153140-26 Rev . 2 2010-02-11 one side first, then turn the chain saw over and file the teeth on the other side. • File all the teeth to the same length. When the length of the cutting teeth is reduced to 4 mm (0.16") the chain is worn out and should be replaced. (8) General advice on adjusting de[...]

GENERAL SAFETY PRECA UTIONS / ASSEMBL Y English – 13 1153140-26 Rev . 2 2010-02-11 • Check that the bar tip sprock et turns freely and that the lubricating hole in the tip sprocket is not bloc k ed. Clean and lubricate if necessar y . If the chain lubrication system is still not wor king after carrying out the above checks and associated measur[...]

FUEL HANDLING 14 – English 1153140-26 Rev . 2 2010-02-11 Fuel Note! The machine is equipped with a tw o-stroke engine and must alwa ys be r un using a mixture of petrol and two- stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, ev en s[...]

FUEL HANDLING / ST ARTING AND ST OPPING English – 15 1153140-26 Rev . 2 2010-02-11 T ranspor t and storage • Alwa ys store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/s witches, boilers and the like. • Alwa ys store fue[...]

WORKING TECHNIQ UES 16 – English 1153140-26 Rev . 2 2010-02-11 Before use: (33) 1 Check that the chain brake works correctly and is not damaged. 2 Check that the rear right hand guard is not damaged. 3 Check that the throttle lockout works correctly and is not damaged. 4 Check that the stop switch works correctly and is not damaged. 5 Check that [...]

WORKING TECHNIQ UES English – 17 1153140-26 Rev . 2 2010-02-11 8 Unless the user resists this pushing force there is a risk that the chain saw will mov e so f ar backwards that only the kickback z one of the bar is in contact with the tree, which will lead to a kickback. (36) Cutting with the bottom edge of the bar, i.e . from the top of the obje[...]

WORKING TECHNIQ UES 18 – English 1153140-26 Rev . 2 2010-02-11 • Wind direction • Arrangement of branches • Weight of sno w • Obstacles within the reach of the tree: f or example, other trees, power lines , roads and buildings. • Look for signs of damage and rot in the stem, this makes it more probably that the tree will break and star [...]

W ORKING T ECHNIQUES / MAINTENANCE English – 19 1153140-26 Rev . 2 2010-02-11 If you must cut across tree/limb , make two to three cuts, one inch apar t, one to two inches deep. Continue to cut deeper until tree/limb bends and tension is released. Cut tree/limb from outside the bend, after tension has been released. How to a void kic kback What i[...]

MAINTENANCE 20 – English 1153140-26 Rev . 2 2010-02-11 Mov e the front hand guard forwards and back to make sure it mov es freely and that it is securely anchored to the clutch cov er . (47) Checking the inertia brake release Place the chain saw , with the engine switched off, on a stump or other stable surf ace. Release the front handle and let [...]

English – 21 MAINTENANCE 1153140-26 Rev . 2 2010-02-11 Maintenance schedule The follo wing is a list of the maintenance that must be performed on the machine. Most of the items are descr ibed in the Maintenance section. Daily maintenance (Every 5-10 h) Weekl y maintenance (Ev ery 10-25 h) Monthly maintenance (Ev ery 25-40 h) Clean the outside of [...]

TECHNICAL D A T A 22 – English 1153140-26 Rev . 2 2010-02-11 T echnical data Note 1: Noise emissions in the environment measured as sound power (L WA ) in conformity with EC directive 2000/14/EC. Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total f or different sound pressure le vels u[...]

English – 23 TECHNICAL D A T A 1153140-26 Rev . 2 2010-02-11 Bar and chain combinations The follo wing cutting attachments are approved f or the models Husqvarna 235e, 236e, 240e and 240e T rioBrake. EC-declaration of conf ormity (Applies to Europe onl y) Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsi[...]