Husqvarna 324LX-Series manual

E E E E n n n n g g g g l l l l i i i i s s s s h h h h 324L X-series 324LD X-series Oper ator’ s manual (EP A) Please read the operator’ s man ual carefully and mak e sure you understand the instructions before using the machine.[...]

2 – English KEY T O SYMBOLS Symbols W ARNING! Clear ing saws , brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injur y to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine . Alwa ys wear : • A protect[...]

English – 3 CONTENTS Contents Note the f ollowing bef ore star ting: Husqvarna AB has a policy of continuous product de velopment and theref ore reser ves the right to modify the design and appearance of products without prior notice. Maintenance, replacement, or repair of the emission control de vices and system ma y be performed by an y nonroad[...]

4 – English SAFETY INSTR UCTIONS P ersonal pr otective equipment GLO VES Glov es should be wor n when necessar y , e.g., when fitting cutting attachments. HEARING PRO TECTION W ear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed ey e protection. If you use a visor then you m ust also wear approv [...]

English – 5 SAFETY INSTR UCTIONS Vibration damping system Y our machine is equipped with a vibration damping system that is designed to minimize vibration and mak e operation easier . Use of incorrectly wound cord or an incorrect cutting attachment increases the le vel of vibr ation. The machine ′ s vibration damping system reduces the transf e[...]

6 – English SAFETY INSTR UCTIONS Chec king, maintaining and servicing the machine ′′ ′ ′ s safety equipment Throttle loc k • Make sure the throttle control is loc ked at the idle setting when the throttle lock is released. • Press the throttle lock and mak e sure it retur ns to its original position when you release it. • Check that[...]

English – 7 SAFETY INSTR UCTIONS • Regularly check that the muffler is securely attached to the machine. • The muffler on y our machine is equipped with a spark arrestor mesh, this should be cleaned regularly . A block ed mesh will cause the engine to ov erheat and may lead to serious damage. Ne ver use a m uffler with a def ective spark a[...]

8 – English SAFETY INSTR UCTIONS General safety precautions Starting • The complete clutch cov er and shaft must be fitted before the machine is star ted, otherwise the clutch can come loose and cause personal injur y . • Ne ver start the machine indoors. Exhaust fumes can be dangerous if inhaled. • Obser ve y our surroundings and make sur[...]

English – 9 SAFETY INSTR UCTIONS • When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to find out where to dispose of e xcess fuel. • The transpor t guard must alwa ys be fitted to the cutting attachment when the machine is being transpor ted or in storage. General w orking instructions B[...]

10 – English SAFETY INSTR UCTIONS • When trimming and clear ing you should use less than full throttle so that the cord lasts longer and to reduce the wear on the trimmer head. Cutting • The trimmer is ideal for cutting gr ass that is difficult to reach using a normal lawn mower . K eep the cord parallel to the ground when cutting. A void pr[...]

English – 11 WHA T IS WHA T? What is what? LD X 1 T r immer head 2 Be vel gear 3 Grease filler cap , be v el gear 4 Cutting attachment guard 5 Shaft 6 Loop handle 7 Stop s witch 8 Throttle control 9 Throttle lock 10 Cylinder cov er 11 Star ter handle 12 Air purge 13 Fuel tank 14 Choke control 15 Air filter cov er 16 Handle adjustment 17 Drive d[...]

12 – English ASSEMBL Y Fitting the loop handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arro ws on the shaft. • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and scre w . Do not overtighten. • Now adjust the trimmer to give a comf or table working position. Tight[...]

English – 13 ASSEMBL Y • Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the sock et spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible . T o tighten the nut, tur n the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread). • F[...]

14 – English FUEL HANDLING Fuel CA UTION! The machine is equipped with a f our-stroke engine. Make sure that there is alwa ys sufficient oil in the oil tank. Gasoline • Use high-grade unleaded petrol of at least 86 octane . • If the machine is not used f or some time the fuel tank should be emptied and cleaned. Engine oil Check the oil le ve[...]

English – 15 ST AR TING AND ST OPPING Chec k bef ore star ting • Check that the support flange is not crack ed due to f atigue or due to being tightened too much. Discard the suppor t flange if it is crac ked. • Ensure the locking n ut has not lost its captive f orce. The nut loc k should hav e a locking force of at least 1.5 Nm. The tighte[...]

16 – English ST AR TING AND ST OPPING Starting Hold the body of the machine on the ground using y our left hand (CA UTION! Not with your f oot!). Grip the star ter handle, slowly pull out the cord with y our right hand until you f eel some resistance (the star ter pawls grip), now quic kly and powerfully pull the cord. Never wrap the starter cord[...]

English – 17 MAINTENANCE Carb urettor Function • The carburettor go v erns the engine’s speed via the throttle control. Air and fuel are mixed in the carb urettor. The air/fuel mixture is adjustable . Correct adjustment is essential to get the best perf ormance from the machine. • Adjusting the carburettor in volves adapting the engine to s[...]

18 – English MAINTENANCE If the machine is low on po wer , difficult to star t or r uns poorly at idle speed: alwa ys check the spark plug first bef ore taking any further action. If the spark plug is dir ty , clean it and check that the electrode gap is 0,6-0,7 mm. The spar k plug should be replaced after about a month in operation or earlier [...]

English – 19 MAINTENANCE Maintenance schedule Below y ou will find some general maintenance instructions. Daily maintenance • Check the engine oil le vel and top up if necessary . • Check throttle trigger and throttle trigger lock out function. • Check that the stop s witch works correctly . • Check that there are no fuel leaks from the [...]

20 – English TECHNICAL D A T A T echnical data Note 1: Equivalent noise pressure le v el is calculated as the time-weighted energy total f or noise pressure lev els under various working conditions with the follo wing time distr ibution: 1/2 idle and 1/2 max. speed. NO TE! Noise pressure at the user’s ear and vibr ation on the handles are measu[...]

English – 21 FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Husqv ar na Forest & Garden are pleased to e xplain the emissions control system warranty on your 2001 and later small nonroad engine . In U .S. and Canada, new small no[...]

1 Super Auto II Super Auto II 1 2 3 4 5 6 7 8 9 10 4,0 m 13' 2,4 mm .095" ~2,0 m 6,5 ' 6 " 6 " " 15 cm 15 cm[...]

[...]

"Clic" 1 2 3 5 6 7 10 11 8,5 m 28' 4 8 4,2 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm S35[...]

1 2 4 3 2,4-2,7 mm .095-.106" 4,25 m 14' 4,25 m 14' B 6" 15 cm A 6" 15 cm S35 5[...]

´®z+H7o¶5p¨ ´®z+H7o¶5p¨ T35 "Clic" 1 2 3 5 6 7 9 8,5 m 28' 4 8 4,3 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm[...]

[...]

´®z+H7o¶5p¨ 2004-03-31 ´®z+H7o¶5p¨ 1140237-95[...]