Husqvarna 335LX-SERIES 335LS manual

E E E E n n n n g g g g l l l l i i i i s s s s h h h h 335LS 335L X-series Oper ator’ s manual (EP A) Please r ead the operator’ s manual carefull y and make sur e you understand the instructions before using the machine.[...]

KEY T O SYMBOLS 2 – English Symbols W ARNING! Clearing saws, brushcutters and tr immers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine. Alwa ys wear : • A protective[...]

CONTENTS English – 3 Contents Note the f ollowing bef ore star ting: Please read the oper ator’ s manual carefully . Maintenance, replacement, or repair of the emission control de vices and system may be perf or med by an y nonroad engine repair establishment or individual. The Emissions Compliance P er iod referred to on the emissions complian[...]

4 – English INTR ODUCTION Dear customer! Cong ratulations on y our choice to buy a Husqv arna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River , for production of m uskets . The location was logical, since w ater power w as h[...]

English – 5 WHA T IS WHA T? What is what on the c learing saw? 20 23 24 1 T r immer head 2 Grease filler cap , be vel gear 3 Be vel gear 4 Cutting attachment guard 5 Shaft 6 Handle adjustment 7 Loop handle 8 Suspension ring 9 Stop s witch 10 Throttle lock out 11 Throttle control 12 Spark plug cap and spar k plug 13 Cylinder cov er 14 Star ter ha[...]

GENERAL SAFETY PRECA UTIONS 6 – English Impor tant P ersonal pr otective equipment HELMET A protectiv e helmet where there is a risk of falling objects HEARING PRO TECTION W ear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approved e ye protection. If you use a visor then you m ust also wear approv ed pr[...]

GENERAL SAFETY PRECA UTIONS English – 7 BOO TS W ear sturdy , non-slip boots. CLO THING W ear clothes made of a strong fabric and a void loose clothing that can catch on twigs and branches. Alwa ys wear heavy , long pants. Do not wear jewellery , shor ts sandals or go baref oot. Secure hair so it is abov e shoulder lev el. FIRST AID KIT Alwa ys h[...]

GENERAL SAFETY PRECA UTIONS 8 – English Stop switc h Use the stop s witch to switch off the engine . Star t the engine and make sure the engine stops when y ou mov e the stop s witch to the stop setting. Cutting attachment guar d This guard is intended to pre vent loose objects from being thrown to wards the operator . The guard also protects the[...]

GENERAL SAFETY PRECA UTIONS English – 9 Muffler The m uffler is designed to k eep noise lev els to a minimum and to direct e xhaust fumes aw ay from the user . A muffler fitted with a catalytic conv er ter is also designed to reduce harmful exhaust gases. In countries that hav e a warm and dr y climate there is a significant risk of fire. W[...]

GENERAL SAFETY PRECA UTIONS 10 – English Cutting equipment This section describes how to choose and maintain your cutting equipment in order to: • Reduce the risk of blade thrust. • Obtain maximum cutting perf ormance. • Extend the lif e of cutting equipment. T rimmer head • Only use the recommended trimmer heads and tr immer cords. These[...]

ASSEMBL Y English – 11 Fitting the loop handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arro ws on the shaft. • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and scre w . Do not overtighten. • Now adjust the trimmer to give a comf or table working position. Tight[...]

FUEL HANDLING 12 – English Fuel safety Ne ver start the machine: 1 If you ha v e spilled fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate. 2 If you ha v e spilled fuel on yourself or y our clothes, change your clothes . W ash any part of your body that has come in contact with fuel. Use soap and water . 3 If the machine is[...]

FUEL HANDLING English – 13 Mixing • Alwa ys mix the gasoline and oil in a clean container intended f or fuel. • Alwa ys star t b y filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. • Mix (shake) the fuel mixture thoroughly bef ore fill[...]

ST AR TING AND ST OPPING 14 – English Chec k bef ore star ting • Check that the support flange is not crack ed due to f atigue or due to being tightened too much. Discard the suppor t flange if it is crack ed. • Ensure the locking n ut has not lost its captive f orce. The nut loc k should hav e a locking f orce of at least 1.5 Nm. The tight[...]

ST AR TING AND ST OPPING English – 15 Repeat pulling the cord until the engine star ts. When the engine star ts. retur n choke control to run position and apply full throttle; the throttle will automatically disengage from the star t setting. CA UTION! Do not pull the star ter cord all the w ay out and do not let go of the star ter handle when th[...]

W ORKING TECHNIQ UES 16 – English General w orking instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot aff ect your control of the machine . • T o ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out b y the cutting [...]

W ORKING TECHNIQ UES English – 17 Basic w orking techniques Alw a ys slow the engine to idle speed after each working operation. Long per iods at full throttle without any load on the engine can lead to serious engine damage. Grass trimming with a trimmer head T rimming • Hold the trimmer head just above the g round at an angle. It is the end o[...]

MAINTENANCE 18 – English Carb uretor Y our Husqvarna product has been designed and manuf actured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. T o ensure that it continues to run at peak perf or mance and to minimise harmful exhaust emissions after the running-in per iod,[...]

MAINTENANCE English – 19 Fine adjustment of the idle speed T Adjust the idle speed using the idle adjustment scre w T , if it is necessar y to readjust. First tur n the idle adjustment screw T clockwise until the cutting attachment starts to rotate. Then turn the screw anticlockwise until the cutting attachment stops. The idle speed is correctly [...]

MAINTENANCE 20 – English frequently bloc ked, this can be a sign that the perf or mance of the catalytic conv er ter is impaired. Contact your dealer to inspect the muffler . A block ed screen will cause the machine to ov erheat and result in damage to the cylinder and piston. CA UTION! Nev er use a machine with a def ective m uffler . Cooling [...]

MAINTENANCE English – 21 Cleaning the air filter Remo v e the air filter cov er and take out the filter . Wash it clean in warm, soapy w ater . Ensure that the filter is dr y bef ore refitting it. An air filter that has been in use f or a long time cannot be cleaned completely . The filter must therefore be replaced with a new one at regul[...]

22 – English MAINTENANCE Maintenance schedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and ser vice work descr ibed in this manual. More e xtensive w ork must be carried out by an authorised ser vice[...]

English – 23 TECHNICAL D A T A T echnical data Note 1: Equivalent noise pressure le v el is calculated as the time-weighted energy total f or noise pressure le vels under v ar ious working conditions with the follo wing time distribution: 1/2 idle and 1/2 max. speed. NO TE! Noise pressure at the user’ s ear and vibration on the handles are meas[...]

FEDERAL AND CALIFORNIA EMISSIONS CONTR OL W ARRANTY ST A TEMENT 24 – English Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (U.S . Environmental Protection Agency), CARB (Calif or nia Air Resources Board), Environment Canada and Husqvarna F orest & Garden are pleased to explain the emissions control system’ s warranty on your 2009 and lat[...]

FEDERAL AND CALIFORNIA EMISSIONS CONTR OL W ARRANTY ST A TEMENT English – 25 EMISSION W ARRANTY P AR TS LIST 1 Carburetor and internal par ts 2 Intake pipe , airfilter holder and carburetor bolts . 3 Airfilter and fuelfilter cov ered up to maintenance schedule. 4 Spark Plug, covered up to maintenance schedule 5 Ignition Module 6 Muffler with [...]

[...]

"Clic" 1 2 3 5 6 7 10 11 8,5 m 28' 4 8 4,2 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm S35[...]

1 2 4 3 2,4-2,7 mm .095-.106" 4,25 m 14' 4,25 m 14' B 6" 15 cm A 6" 15 cm S35 5[...]

T35, T35x "Clic" 1 2 3 5 6 7 9 8,5 m 28' 4 8 4,3 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm[...]

"Clic" 1 2 3 5 6 7 9 10 m 32' 4 8 4,3 m 14' 2,7-3,3 mm .106-.13" 10 cm 4" 6" 15 cm T45, T45x[...]

[...]

[...]

[...]

[...]

[...]

1151411-95 ´®z+SI3¶5¨ ´®z+SI3¶5¨ 2008-12-22[...]