Iiyama LE4041UHS-B1 manual

ENGLISH Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference. USER MANUAL[...]

ENGLISH  We reserve the right to change speci fi cations without notice.  All trademarks used in this user manual are the property of their respective owners. We recommend recycling of used product. Please contact your dealer or iiyama service center . Recycle information is obtained via the Internet, using the address: http://www .iiyama.co[...]

ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY ............................................................................ 1 SAFETY PRECAUTIONS................................................................ 1 SPECIAL NOTES ON LCD MONITORS ......................................... 3 CUSTOMER SER VICE ...................................................[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CAB[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE  When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Y ou may fi nd slig[...]

ENGLISH 4 FOR YOUR SAFETY NOTE  If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging. W ARNING  If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediatel[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5 The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. * The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power s[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECTORS : MONITOR <Front> <Back Controller > ENTER/ VIDEO SOURCE Enter / Input Select Button MENU Menu Button Up Button Down Button / + + Button / - Left / - Button Power Button Power Indicator Blue Normal Operation Orange Power Management Remote Sensor Remote Sensor[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7 <Back> AC SWITCH (ON) / (OFF) MAIN POWER Main Power Switch AC IN AC-INLET AC Connector( : Alternating current) (AC-IN) AC OUT AC-OUTLET AC Connector (AC-OUT) DVI IN DVI-D 24pin DVI-D 24pin Connector HDMI1 IN HDMI HDMI Connector HDMI2 IN HDMI HDMI Connector , DP IN DisplayPort DisplayPort Connector DP [...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR INST ALLA TION CAUTION  Follow the manual instructions for the type of mount you have selected. Refer all servicing to quali fi ed service personnel.  Moving the monitor requires at least two people.  Before installing, please make sure the wall is strong enough to hold the necessary weight of the[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 9 CONTROLS AND CONNECTORS : REMOTE CONTROL T urns the monitor ON and OFF . ECO Display the ECO mode menu. OSD Display the OSD menu. FREEZE Freeze the picture. i-STYLE Display the i-Style Color menu. MENU Opens the monitor ’s on-screen menu systems. When the menu system is already open, pressing this button [...]

ENGLISH 10 BEFORE YOU OPERA TE THE MONITOR T o use the remote control, insert the two dry batteries. PREP ARING THE REMOTE CONTROL CAUTION Do not use any other batteries other than those speci fi ed in this manual for the Remote Control. Do not insert old and new batteries together in the Remote Control. Make sure that the terminals match the &quo[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 1 1 BASIC OPERA TION  T urning the monitor ON The monitor is on and the Power Indicator turns Blue when you press the Power Button on the monitor or the Remote Control. The monitor is of f and the Power Indicator turns Orange when you press the Power Button on the monitor or the Remote Control. Press again[...]

ENGLISH 12 BEFORE YOU OPERA TE THE MONITOR  Move the Adjustment bar Perform the adjustment by pressing the / Button on the monitor or on the Remote Control while the Adjustment bar of menu page is displayed on the screen.  Move the cursor vertically Select adjustment by pressing the / Button on the monitor or the Remote Control while the menu[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 13  Adjust the volume of sound Press the VOL / Button on the Remote Control to adjust the volume of sound when the menu page is not displayed on the screen.  Switch the input signal This is activated when you successively press the ENTER Button on the monitor or INPUT Button on the Remote Control. Even [...]

ENGLISH 14 BEFORE YOU OPERA TE THE MONITOR CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor fi rst and t[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 15  Procedure for turning ON the Power Switch T urn ON the monitor fi rst, and then the computer .  Signal Timing Change to the desired signal timing listed on page 31: COMPLIANT TIMING.  Windows XP/Vista/7/8 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug &[...]

ENGLISH 16 OPERA TING THE MONITOR OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 25 for SCREEN ADJUSTMENTS. Press the ME[...]

ENGLISH OPERA TING THE MONITOR 17 ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press Input Select Input Select Y ou can skip the Menu items and display an adjustment scale directly by using the following button operations.  Input Select: Press the INPUT Button when the Menu is not displayed. Direct Direct However it wil[...]

ENGLISH 18 OPERA TING THE MONITOR T oo dark T oo bright Brightness * 1,2,3 T oo dull T oo intense * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. * 2 Brightness and Adv . Contrast adjustments are disabled when ECO Mode is on. * 3 Brightness adjustment is disabled when Adv . Contrast is on. [...]

ENGLISH OPERA TING THE MONITOR 19 Adjustment Item Problem / Option Button to Press PiP/PbP Off PiP/PbP Mode is turned of f. PiP/PbP Mode * Display the sub screen in the main screen. PiP Divide display images in two PbP 2win Divide display images in three PbP 3win Divide display images in four PbP 4win Select the DVI input. DVI Select the HDMI2 inpu[...]

ENGLISH 20 OPERA TING THE MONITOR V olume T oo soft T oo loud Adjustment Item Problem / Option Button to Press Audio Mute Direct Direct Return the sound volume to the previous level. T urn off the sound temporarily . Select the Line-In input. Line-In Select the HDMI1 input. HDMI1 Audio Input * * Suitable for HDMI/DisplayPort input only . Y ou can s[...]

ENGLISH OPERA TING THE MONITOR 21 T oo weak T oo strong Adjustment Item Problem / Option Button to Press Color * User Color Bluish white Red Green Blue Cool (9300k) Reddish white Normal (6500k) Greenish white W arm (5500K) Direct i-Style Color * Color is disabled when Blue Light Reducer is activated. Y ou can skip the Menu items and display an adju[...]

ENGLISH 22 OPERA TING THE MONITOR OSD H. Position OSD is too left OSD is too right OSD is too low OSD is too high Y ou can set the OSD display duration time. 5 / 10 / 20 / 30 / 60 seconds OSD V . Position Adjustment Item Problem / Option Button to Press OSD Setting OSD T ime Out OSD Background The background of OSD is mode transparent. Off / 1 / 2 [...]

ENGLISH OPERA TING THE MONITOR 23 Factory-preset data is restored. See your graphic card user guide for more information about changing the resolution and refresh. Displays information regarding the current input signal coming from the graphic card in your computer . NOTE <Example> Phase H. Position V. Position Clock DisplayPort EXIT : E x i [...]

ENGLISH 24 OPERA TING THE MONITOR * 1 Only Analog Input. * 2 For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page 25 for SCREEN ADJUSTMENTS. * 3 See page 25 for SCREEN ADJUSTMENTS. * 4 Blue Light Reducer is disabled when Color is activated. * 5 T o display 3840 x 2160 at 60 Hz, the DisplayPort setting mus[...]

ENGLISH OPERA TING THE MONITOR 25 SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 3840 × 2160, but can not provide the best at resolutions of less [...]

ENGLISH 26 OPERA TING THE MONITOR 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).  Another way to make the Clock adjustment is to c[...]

ENGLISH OPERA TING THE MONITOR 27  In case the strong fl icker or blurs remain on a part of the screen, repeat steps and because the Clock may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again.  Adjust the H-Position after the Phase adjustment if the[...]

ENGLISH 28 TROUBLE SHOOTING The screen is not synchronized.  The Signal Cable is properly connected.  The signal timing of the computer is within the speci fi cation of the monitor .  The video output level of the c omputer is within th e speci fi ca tion of the monitor . The picture does not appear .  The Power Cable is ?[...]

ENGLISH Recycling information 29 For better environment protection please don't dispose your monitor . Please visit our web site: www .iiyama.com/recycle for monitor recycling. RECYCLING INFORMA TION[...]

ENGLISH 30 APPENDIX APPENDIX Design and speci fi cations are subject to change without prior notice. SPECIFICA TIONS LCD Panel Panel technology MV A 0.229mm H × 0.225mm V Response time Pixel pitch 4ms (Gray to Gray) Display Colors Approx.1.07G Sync Frequency Analog: Horizontal: 30.0-80.0kHz, V ertical: 55-75Hz Digital(DVI): Horizontal: 30.0-100.0[...]

ENGLISH APPENDIX 31 DIMENSIONS 921.5mm/36.6” 879.5mm/34.6” 487.0mm/19.2” 69.5/2.7” 528.5mm/20.8” COMPLIANT TIMING M143A21 Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.000MHz 106.500MHz 136.750MHz 146.250MHz 138.500MHz 197.000MHz 241.500MHz 296.700MHz 533.250MHz V ertica[...]