Iiyama ProLite C1911S-3 manual

DEUTSCH FRANCAIS ENGLISH NEDERLANDS POLSKI USER MANUAL Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.[...]

ENGLISH[...]

ENGLISH  We reserve the right to change speci fi cations without notice.  All trademarks used in this user manual are the property of their respective owners. We recommend recycling of used product. Please contact your dealer or iiyama service center . Recycle information is obtained via the Internet, using the address: http://www .iiyama.co[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CAB[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE  When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Due to the nature of[...]

ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. * The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power s[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5  Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor . It may cause damage.  Unplug the monitor before installation to avoid electric shock or damage. CAUTION <Installation> <Remove>[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECT ORS Power Switch ( ) Power Indicator Blue: Power is ON. Orange: Power is OFF . Input Select / Select Button ( ) Scroll Up Button ( ) Scroll Down Button ( ) Menu / Exit Button ( ) Speakers Audio input Connector (AUDIO IN L/R) Video output Connector (A V2 OUT) Video output Connector (A V1[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7 CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer or video equipment to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for Video equipment when using the audio features. Connect the Power Cable to [...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR  Signal Timing Change to the desired signal timing listed on page 19: COMPLIANT TIMING.  Windows 95/98/2000/Me/XP/Vista/7 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2[...]

ENGLISH OPERA TING THE MONITOR 9 OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 19. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS. NOTE Press [...]

ENGLISH 10 OPERA TING THE MONITOR ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press Picture T oo dark T oo bright Brightness* 1 Contrast T oo dull T oo intense Y ellowish white Bluish white Greenish white Colour T emp. Normal W arm Cool * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the scre[...]

ENGLISH OPERA TING THE MONITOR 1 1 Adjustment Item Problem / Option Button to Press Sound T oo weak T oo strong Bass V olume T oo soft T oo loud T reble T oo weak T oo strong Balance T oo loud sound of the right speaker T oo loud sound of the left speaker Audio Source Input Audio is available on all video input. All PC Just on PC input. Sound Exit [...]

ENGLISH 12 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Option No Signal Off Auto Off Auto Off is disabled. Option Exit Page 1 2 Select OSD Language OSD Time Out A V Switch Off Auto Off No Signal Off Reset English 20sec On Off OSD Language English Deutsch English German Français French Portuguese Portuguese Dutch Italian[...]

ENGLISH OPERA TING THE MONITOR 13 Adjustment Item Problem / Option Button to Press PC Phase* 2 Clock* 2 T oo left T oo right T oo low T oo high H-Position V -Position T oo narrow T oo wide T o correct fl ickering text or lines Only PC Input Auto* 1 Adjust H / V -Position, Clock and Phase automatically . * 1 For best results, use the Auto Adjust in[...]

ENGLISH 14 OPERA TING THE MONITOR SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 12 80 × 1024, but can not provide the best at resolutions of less[...]

ENGLISH OPERA TING THE MONITOR 15 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).  Another way to make the Clock adjustment is to c[...]

ENGLISH 16 OPERA TING THE MONITOR  In case the strong fl icker or blurs remain on a part of the screen, repeat steps and because the Clock may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again.  Adjust the H-Position after the Phase adjustment if the[...]

ENGLISH TROUBLE SHOOTING / RECYCLING INFORMA TION 17 TROUBLE SHOOTING 1. Perform the adjustments described in OPERA TING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERA TING THE MONITOR or if the problem pers[...]

ENGLISH 18 APPENDIX SPECIFICA TIONS APPENDIX LCD Panel Driving system a-Si TFT Active Matrix 0.294mm H × 0.294mm V Response time Pixel pitch 5ms Display Colors Approx.16.7M Sync Frequency Horizontal: 30.0-82.0kHz, V ertical: 56-75Hz Maximum Resolution 1280 × 1024, 1.3 MegaPixels Input Connector D-Sub mini 15 pin, BNC×2 Input Sync Signal Separate[...]

ENGLISH APPENDIX 19 M055A22 COMPLIANT TIMING DIMENSIONS Dot Clock 25.175MHz 31.500MHz 40.000MHz 49.500MHz 65.000MHz 78.750MHz 108.000MHz 135.000MHz 25.175MHz 28.322MHz V ertical Frequency 59.940Hz 75.000Hz 60.317Hz 75.000Hz 60.004Hz 75.029Hz 60.020Hz 75.025Hz 70.087Hz 70.087Hz VGA TEXT VESA SVGA VGA XGA 1024 × 768 640 × 480 800 × 600 640 × 350 [...]