Impex IGS-4350 manual

NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model IGS-4350 Retain This Manual for Reference 07-19-05 OWNER'S MANUAL IRON GRIP STRENGTH SMITH MACHINE IGS-4350 IMPEX INC. 14777 DON JULIAN RD., CITY OF INDUST[...]

TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 SMITH MACHINE HARDW ARE PACK….......…............................................. 4 SMITH MACHINE ASSEMBLY INSTRUCTIONS......[...]

IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine. In particul ar, note the follow ing safety precautions: 1. Keep children and pets away [...]

WA RNI NG LABEL PLA CEMENT The w arnin g labels show n here h ave been p laced on t he Rear Base and Upp er Frame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacements. Apply the labels in the location shown. 3[...]

SMITH MA CHINE HA RDWA RE PA CK 4[...]

SMITH MA CHINE HA RDWA RE PA CK 5[...]

SMITH MA CHINE A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Connect the two Base Fr ames (#1) by a Cross Brace (#2) in the mid- span. Secure each end of The[...]

STEP 2 (See Diagram 2) A.) Attach the r ight Fr ont Vertical Fr ame (#3) to the ri ght Base Frame ( #1). Secure it w ith two M10 x 3” Carri age Bolts ( #76), one 5 1/8” x 2 ¾” Bracket (#34), tw o Ø ¾” W ashers (#66), and two M 10 Aircraft Nuts (#86) . Do not tig hten the Nuts and Bolts y et. B.) Al ign a Ø 2 ½ ” Rubber Bumper (#59) t[...]

DIAGRAM 2 8[...]

STEP 3 (See Diagram 3) A.) Attach the R ear Vertic al Beam (#6) to the top of the Cross Br ace (#2). Attach the W eight Glide Base (#8) to the Cross Brace from the Bottom. Ali gn the holes. Secur e them wi th two M 10 x 3” C arriag e Bolts (#76), Ø ¾” W ashers (#66), and M10 Air craft Nuts (#86). B.) Attach the Backr est Board (#38) to the R [...]

STEP 4 (See Diagram 4) A.) Attach the W eight Glide Post ( #7) to the W eight Glide Base (#8) . Secure it w ith f our M10 x 1” Carr iage Bolts ( #74), Ø ¾” W ashers (#66) and M 10 Aircr aft Nuts (#86). B.) Sl ide the Slidi ng W eight Post (#14) onto the Post from the top. Place the U pper Frame (#9) onto the W eight Gli de Post (#7), R ear Ve[...]

STEP 5 (See Diagram 5) A.) Attach the Butter fly Base (#12) to the front of Rear Vertical Frame (#6). Attach the Butter fly Pulley Bracket (#13) to the back of the Rear Ver tical Frame. Align the hol es. Secure them with tw o M10 x 2 ¾” C arriag e Bolts (#75), Ø ¾” W ashers (#66), and M10 Air craft Nuts (#86). B.) Attach the R ight Butter fl[...]

CABLE LOOP DIAGRAM 12[...]

STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach the 132” Upper Cabl e (#41) to the front opening on the Upper Frame (#9). Attach a Pull ey (#57) to the opening . Secure it with one M10 x 2 ½” Allen Bolt ( #70), tw o Pulley Bushings ( #62), and one M10 Airc raft Nut (#86). Make sur e the ball stopper of the Cabl e is underneath the F[...]

STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach one end of the 87” Butterfly Cabl e (#42) to the cli p on the Rig ht Butterfly ( #11). Draw the Cable to the ri ght Sw ivel Pulley Bracket (#20). B.) Attach a Pulley (#57) to the Bracket. Secur e it w ith one M10 x 1 ¾” Al len Bolt (#69) , two Ø ¾” W ashers (#66), and one M10 Air c[...]

STEP 8 (See Diagram 8 & Cable Loop Diagram) A.) Attach the 128” Lower Cable (#40) to the opening on the bottom of the Rear Vertical Beam (#6). Attach a Pull ey to the opening . Insert two Pulley Bushings (#62) to the holes outsi de of the opening. Attach the Foot Plate ( #16) to the Bushing s. Alig n the holes and secure them with one M 10 x [...]

DIAGRAM 8 16[...]

STEP 9 (See Diagram 9) A.) N OTE: Help of another person is str ongly recommended fo r this step. Place the Lifting Sleeve ( #27) in betw een the two Safety Stop Frames (#26). Al ign the hol es. Insert the W eight Bar (#28) into the Safety Stop Frame from one end and through the Li f ting Sleev e (#27) to the other Safety Stop Frame on the opposite[...]

EXPLODED DIAGRAM 18[...]

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Base Fram e 2 51 2 3/8” Square End Cap 2 2 Cross Brace 1 52 2 ¾” x 2” End Cap 1 3 Front Vertic al Beam 2 53 Ø 1” Cone-s haped End Cap 14 4 Left Vert ical Fram e 1 54 2 3/8” x 2” Sleeve 2 5 Right Vertical F ram e 1 55 Sliding Sleeve 4 6 Rear Vertic al Beam 1 56 Lock Ring 2 7 W eight Glide Post 1 [...]

MULTI-PURPOSE BENCH HA RDWA RE PA CK 20[...]

MULTI-PURPOSE BENCH A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Attach the Main Frame (#1) to the Front & Rear Stabilizers (#2 & 3). Secure e[...]

STEP 2 (See Diagram 2) A.) Attach four Bushi ngs (#27) to a Seat Support Frame (#6) . B.) Attach a Backr est Support (#7) to the rear of the Seat Support Frame (#6) . Alig n the holes and secure them w ith one M10 x 1 ¾” Al len Bolt (#37) and ∅ ¾” W asher (#42). Repeat the same procedure to instal l the other side. C.) Attach two Bushings t[...]

STEP 3 (See Diagram 3) A.) Pl ace the Backrest Board (#14) onto the Backrest Supports (#7) . Secure it with four M8 x 2” Allen Bolts ( #40) and ∅ 5/8” W ashers (#43). B.) Pl ace the Seat Pad (#13) onto the Seat Support Fr ames (#6). Secure it wi th four M8 x 2” Allen Bol ts (#40) and ∅ 5/8” W ashers (#43). DIAGRAM 3 23[...]

STEP 4 (See Diagram 4) A.) Attach the Leg Dev eloper (#5) to the open bracket on the Mai n Frame (#1). Secur e it w ith an Axle ( #17), tw o M10 x ¾ ” Allen Bolts (#36), and tw o ∅ ¾” W ashers (#42). B.) Insert one Foam Tube (#10) hal fway through the hol e on the Main Frame. Inser t two Foam Tubes halfway thr ough the holes on the Leg Deve[...]

STEP 5 (See Diagram 5) A.) Attach the Ar m Curl Pad ( #15) to the Arm C url Stand (#4) . Secure it w ith two M8 x 5/8” Allen Bolts (#41) and tw o ∅ 5/8” W ashers (#43). Insert the Arm C url Stand into the front openi ng on the Main Frame ( #1). Use the Lock Knob to hol d the desired Arm C url heig ht. B.) Attach the C url Bar Suppor t Frame ([...]

26[...]

MULTI-PURPOSE BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Arm Cur l Stand 1 5 Leg Devel oper 1 6 Seat Support Frame 2 7 Backrest Support 2 8 Slidin g Blo ck 1 9 Incline Adjustment Bar 1 10 Foam Tube 3 11 Curl Bar Support Frame 1 12 Curl Bar Handle 1 13 Seat Pad 1 14 Backrest Board 1 15 Arm C[...]

IMPEX INC. LIMITED WARRANTY IMPEX Inc. ( "IMPEX") warrants this product to be f ree from defec ts in work manship and m aterial, under norm al use and service conditions, for a period of two years on the Fram e fr om the date of purc hase. T his warranty extends only to the original purc haser. IMPEX 's obligation under this W arr an[...]