Impex MP-2105 manual

NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MP-2105 Retain This Manual for Reference 10-26-06 OWNER'S MANUAL MARCY PLATINUM MP-2105 HOME GYM IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 9[...]

TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDW ARE PACK……….....…....................................................................... 4 ASSEMBLY INSTRUCTIONS....[...]

IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever, certain precauti ons apply w henever you operate a pi ece of exercise eq uipment. Be sure to read the entire manual before y ou assemble or operate y our machine. In particular, note the follow ing safety precautions: 1. Keep children and pets away f[...]

WA RNING LA BEL REPLA CEMENT The w arning labels show n here have been placed on the Rear Stabiliz er and Upper Frame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacements. Apply the labels in the location shown. 3[...]

HA RDWA RE PA CK 4[...]

HA RDWA RE PA CK 5[...]

HA RDWA RE PA CK 6[...]

A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Insert tw o Guide Rods (#16) into the holes on the Rear Stabilizer (#15). Secure each Guide Rod w ith one [...]

DIAGRAM 1 8[...]

STEP 2 (See Diagram 2) A.) Attach the U pper Frame (#1) onto the two Guide Rods (#16). Secur e it w ith tw o M10 x ¾” All en Bolts (#78) and ∅ ¾ ” W ashers (#92). DO NOT tighten the Bolt s yet. B.) Pl ace the Upper Frame ( #1) onto the Verti cal Frame ( #4). Secure it w ith two M10 x 2 ¾” Carri age Bolts ( #90), one 4 ¾” x 2 ¾” Bra[...]

STEP 3 (See Diagram 3) A.) Attach the Front Press Base (#2) to the Upper Frame ( #1). Secure it w ith one 6 ¾” Front Pr ess Base Axle ( #29), tw o Ø 1 ¼” W ashers (#59), and tw o M10 Aircraft Nuts (#91) . B.) Attach the Front Press (#3) to the Front Press Base (#2) . Secure it w ith one 7 ½” Front Pr ess Axle ( #30), tw o Ø1 ¼” W ashe[...]

DIAGRAM 3 11[...]

STEP 4 (See Diagram 4) A.) Attach the Seat ( #32) to the Seat Post (#6). Secur e it with tw o M8 x 1 5/8” Allen Bolts ( #86) and Ø 5/8” W ashers (#88). B.) Inser t the Seat Post into the opening on the Seat Support Frame (#7) . Thread the Lock Knob (#40) into the hol e on the Seat Support Frame to lock the Seat at sel ected height. C.) Insert [...]

STEP 5 (See Diagram 5) A.) Sl ide the Rig ht Butterf ly (#10) onto the ri ght ax le on the Butterfly Base (#13). B.) Inser t the Butterfly H andle (#9) i nto the piv ot on the Right Butter fly. Secure i t wi th one M10 x ¾” Allen Bolt (#78) and ∅ 1 ¼” W asher (#59) from the bottom. C.) Repeat Procedures A and B abov e to install the other s[...]

CABLE LOOP DIAGRAM 14[...]

STEP 6 (See Diagram 6 & Upper Cable Loop Diagram) A.) Attach the 163” Upper C able (#33) to the openi ng on the front of Upper Frame ( #1). Make sure the ball stopper is underneath the Frame. Attach a Pulley (#47) to the Cabl e. B.) Secure the Pulley to the opening with one M 10 x 3 ½ ” Allen Bol t (#77), tw o Pulley Bushings ( #49), and o[...]

DIAGRAM 6 16[...]

Upper Cable Loop Diagram 17[...]

STEP 7 (See Diagram 7 & Low er Cable Loop Diagram) A.) Attach the 164” Low er Cable (#35) to the opening on the Leg Developer (#8). Attach a Pulley (#47) to the opening . Secure it with one M10 x 2 ½” Allen Bolt ( #84), tw o ∅ 7/8” Leg D eveloper Pulley Bushings (#52), and one M10 Ai rcraft Nut (#91) . B.) Dr aw the Cabl e underneath t[...]

DIAGRAM 7 19[...]

Lower Cable Loop Diagram 20[...]

STEP 8 (See Diagram 8 & Butterfly Cable Loop Diagram) A.) Clip one end of the 98” Butterfly Cable (#34) to the open slot on the Right Butterfly (#10). B.) D raw the Cable to the open bracket on the r ight si de of the Vertical Frame ( #4). Attach a Small Pull ey (#73) to the bracket C.) Secure it w ith one M10 x 1 ¾” Al len Bolt (#83) , tw[...]

22[...]

Butterfly Cable Loop Diagram 23[...]

STEP 9 (See Diagram 9) A.) Connect the Lat Bar ( #24) to the Upper C able (#33) with tw o Hooks (#37) and one Chain (#36). B.) Connect the Abdominal Strap (#70) to the Low er Cable (#35) w ith a Hook. C.) Connect the Shi ver Bar (#19) to the Low er Cable wi th two H ooks and a Chain. DIAGRAM 9 24[...]

WEIGHT RESISTANCE CHART WEIGHT PLATE Station 1 2 3 4 5 6 7 8 9 Low Pulley 22 33 44 55 66 77 88 99 110 Lat Pull 30 40 50 60 70 80 90 100 110 Butterfly 10 16 22 28 34 40 46 52 58 Front Press 20 34 48 62 76 90 104 118 132 AB Crunch 22 33 44 55 66 77 88 99 110 Leg Developer 26 38 50 62 74 86 98 110 122 WEIGHT PLATE Station 10 11 12 13 14 Low Pulley 121[...]

PA RTS LIST KEY NO. DESCRIPTION Q’ty 1 Upper Fr am e 1 51 Ø 1 ¼” Front Pr ess Bushing 2 2 Front Pr ess Base 1 52 Ø 7/8” Leg Developer Bushing 2 3 Front Pr ess 1 53 ∅ 1” Bushing 10 4 Vert ical Fr am e 1 54 Ø 1” Spacer 2 5 Back r est Suppor t Fram e 1 55 Rubber Bumper 2 6 Seat Post 1 56 Ø 1 ½” Spacer 2 7 Seat Suppor t Fr am e 1 57[...]

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") w ar rants this product to be free f rom defec ts in work m anship and m aterial, under normal use and servic e conditions, f or a period of two y ears on the Fram e f rom the date of purchas e. This warranty extends only to the original purchaser. IMPEX's obligation under this [...]