Intel TIGH2U manual

Intel ® Carrier Grade Server TIGH2U Configuration Guide System / Spares / Accessories List March 2008 Rev 1.2 Reference guide to assist customers an d the field in ordering the servers, accessories and spares ~Subject to Change Without Notice~[...]

March 2008 INFORMATION IN THIS DOCUMENT IS PROVID ED IN CONNECTION WIT H INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTO PPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRA NTED BY THIS DOCUMENT. EXCEPT AS PROVIDED I N INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PR ODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL [...]

Document Table of Contents I. INTRODUCTION ........................................................................................................ 4 II. PRODUCTION SKUS .................................................................................................. 5 III. PRODUCTION SPARES/ACCESSORIES LIST .......................................[...]

I. Introduction Product Description: The Intel® Carrier Grade Server TIGH2U is the 4 th generation of the 2U x 20”D Intel® Telecom and Industrial Grade Rack Server . The TIGH 2U supports the 45nm Quad-Core Intel ® Xeon ® processor 5400 Series with 12M L2 cach e, coupling high performance with power efficiency to provide improved perf ormance-[...]

II. Production SKUs The TIGH2U Production SKUs that can be ordered are liste d below: PID Order Code Description MM# Min. Order Qty. TLHA0201W Intel® Carrier Grade Server TIGH2U Base Model 0 with AC Power Suppl y . 890868 1 TLHD0201W Intel® Carrier Grade Server TIGH2U Base Model 0 with DC Power Suppl y . 890910 1 See the TIGH2U Base Model 0 Confi[...]

TIGH2U Base Model 0 Configuration All Production SKUs are base model 0 SKUs (no CPU, heatsink, memory, hard drive or plug-in adapters are provided). Those co mponents must be ordered separately as Accessories from Intel or from third party vendors listed in the Tested Hardware and Operating System List (THOL). The below table lists how many of each[...]

Notes on the TIGH2U Model 0 Configuration and Options:  PCI Risers o The base configuration comes standard wi th two PCI Risers supporting up to five PCI slots. These include:  One low-profile riser supporting two PCI-Express (PCIe) slots  One full-height, full-length riser suppo rting three slots: two PCIe x4 and one PCI-X. o Additional f[...]

 IO Option Modules o These modules, available as optional accessories, attach to the s ystem board via a proprietary connector, and provide additional IO through the rear bulkhead.  The AXXGBIOMO option module provides two Gigabit E thernet NICs.  The AXXSASIOMOD option module provides one x4 external SAS port. o Note: Using the AXXGBIOMOD[...]

Details on Ordering of Processors: The TIGH2U supports the Quad-Core Intel ® Xeon ® processor 5400 Series. Ordering details for the CPUs for use in TIGH2U are listed below , and includes both Tray (for OEMs) and Boxed (Retail channel) processor s. Quad-Core Intel ® Xeon ® Processors Supported by TIGH2U: Boxed Pro cessor Tray Processor Processor[...]

III. Production Spares/Accessories List Below are the Spares parts and Accessories that may be ordered with the TIGH2U system. Any of these parts may be ordered as spares for part replacement purposes or as additional customer inventory. Some of the parts below ar e not included in the TIGH2U system base model and may be ordered as accessories for [...]

Production Spares/Accesso ries List (continued) PID Order Code Description Contents Included in Base Model (Y/N) MM# Min. Order Qty PCI Risers and I/O Options ASR2500FHR SR25 00 (2U) Full Height PCI-Expr ess riser (two PCI-Express slots, one PCI-X slot) Riser Y 880515 1 ADRACTRIS SR2500 (2U) Full Height PCI-X "active" high performance ris[...]

Production Spares/Accesso ries List (continued) PID Order Code Description Contents Included in Base Model (Y/N) MM# Min. Order Qty Spares TLHSICBL004W TIGH2U System Interconnect Cable Kit Flex cable (SAS interface, front panel signals), front panel power cable, serial port cable, CD-ROM cable, alarm cable, TAM module cable Y 891494 1 TLHFANSETW TI[...]

Appendix A. Rack Mounting Options for 1U and 2U Intel® Communications Rack Mount Servers Rack mounting kits for 2-post or 4-post, 19-inch or 23-inch racks are offered for this product. Please refer to the tables below for the correct options to suit your needs. All rack mount kits listed are suitable for 1U and 2U Intel® Communications Rack Mount[...]

TMLCMOUNT21 The TMLCMOUNT21 kit mounts Intel® Communica tion Rack Mount Servers to a 2-post, central office type, 19” wide rack. This ki t consists of simple L-s haped brackets; which fasten to the sides of the server and to the rack. TMLCMOUNT21 3/28/2008 v 1.2 14 of 20[...]

TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT52 TMLPMOUNT 41/51/52 series mounts Intel® Communication Rack Mount Servers to 2- post or 4-post racks. TMLPMOUNT 41 and TMLPMOUNT 51 are used for mounting servers on 19” wide racks. These racks are considered standard EIA (universal hole spacing) racks. TMLPMOUNT 52 is used for mounting servers on 23” wid[...]

4. EIA-Wide spacing doesn't have the inters ti tial hole that is present in EIA- Universal. TMLPMOUNT51 contains an adapter bracket to overcome this EIA- Wide issue. 5. This component (2U Nut Bar) en ables installation of a rail kit into a 1U rack slot when there is already equipment insta lled both above and below that open slot. 6. The sides[...]

The diagrams above summarize the components and “slide-in rail-type” sys tem of the TMLPMOUNT41. It can be adapted for a 2-post or 4-post installation. 3/28/2008 v 1.2 17 of 20[...]

The main difference between the TMLPMOUNT 41 and TMLPMOUNT 51/52 series is that the TMLPMOUNT 41 series uses a screw to lock the server in place via the Universal Mounting Bracket, whilst the TM LPMOUNT 51/52 series has an additional Sli de Pull-Out Locking feature. The Universal Front Mounting Bracket on the TMLPMOUNT41 The Slide Pull-Out Locking [...]

TMLPSLIDE01 The TMLPSLIDE01 is an accessory kit designed for use in conjunction with slide rails to produce a rack mounted serviceable se rver. The TMLPSLIDE01 kit contains two Universal Front Mounting Brackets that secure the serv er to the front of the rack. The sliding rails and optional mo unting brackets required t o mount the server must be p[...]

3/28/2008 v 1.2 20 of 20 Although these mounts have be en designed for industry standar d racks, please consult with your Intel Field Application or Sales Engineer before selecting racks for these servers. Compatible rack mounting kits may also be obtained from 3 rd party suppliers.[...]