JAI CV-A33CL manual

Digital Monochrome Quad Speed CMOS Progressive Scan Camera CV -A33CL Operation Manual Camera: Revision A Manual: Version 1.0 A33Manualsep09.doc JPT 09 -09-03[...]

CV-A33CL - 1 - Table of Contents 1. General ........................................................................................................ 2 2. Standard Co mposition ...................................................................................... 2 3. Main Features ....................................................................[...]

CV-A33CL 1. Gener al The CV-A33CL is a digital CMOS camera design ed for automated imaging applications, featuring high speed within a uniform and compact housing. The high-speed shutter function, asynchron ous random trigger mode and partial scan mode, wit h window of interest, allows the cam era to capture high quality images o f fast moving obje[...]

CV-A33CL 4. Locations and F unctions U4-40 機銘版 17 .5 50 58 50 26 5 4- M3深4 M3深 4 (0 .2 ) (2 .28 ) (0 .69 ) (1 .97 ) (1 .02 ) (1 .97 ) 8 (0 .31 ) (0 .3 ) 7. 6 5 (0 .2 ) 44 35 C- Moun t (1 .73 ) (1 .38 ) /O DI GI T A L I IN / DC TR IG 26 (1 .02 ) 5 4xM3 Depth 4 5 4 ｺﾈｸﾀ ｰ 固定ﾈｼ ﾞ 2 1 6- 4xM3 Depth 4 3 5 5 1. CMOS sensor 2[...]

CV-A33CL - 4 - 5. Pin Assignment 5.1. 12-pin Multi-conne ctor (DC-IN/Trigger) Type: HR10A-10R-12PB-01 Pin no. Signal Remarks 1 GND 2 +12 V DC input 3 GND 4 N/C 5 GND 6 RXD in 7 TXD out RS 232C. Or via Camera Link by internal SW200 on PK8378A (Off=HR) 8 GND 9 EEN out And via Camera Link 10 Trigger input Or via Camera Link. (TI=1 for HR) *) 11 N/C 12[...]

CV-A33CL 5.3. Input and Output Circuits 5.3.1. Trigger input The trigger inputs on pin #10 12 pin Hirose connector is AC coupled. To allow a long pulse width, the input circuit is a flip flop , which is toggled by the negative or positive differentiated spikes caused by the falling or rising trigger edges. GND +5V 15k TTL 1k GND 100n 1k 68k 100k 1n[...]

CV-A33CL 5.3.3. Camera Link interface The video output is Camera Link with 10 or 8 b it video placed in a base configuration. The digital output signals follow the Camera Lin k standardized multiplexed signal o utput interface. The Camera Link output driver is NS typ e DS90CR285MTD. The data bits from the digital video, FVAL, LVAL , DVAL and EEN ar[...]

CV-A33CL - 7 - 6. F unctions and Oper ations In the following the format shown in “7.3. CV-A33CL command list” are used for function commands and parameters. 6.1. Basic functions The CV-A33CL camera is a progressive scan camera with 10 or 8 b it video output in single channel Camera Link. Programmable partial scan, where the start line an d the[...]

CV-A33CL - 8 - 6.1.3. Column Process The voltage signal from a single pix el is send to the column amplifier trough the 4 to 1 multiplexer. After the S/H circuit, the offset and gain calibrating is perform. A 10 bit A/D c onverter send the digital pixel signal to the digital horizontal shift register by a 1 to 4 multiplexing. Signals from a single [...]

CV-A33CL - 9 - 6.1.6. Window of Interest If a higher frame rate is wanted, it is poss ible to change the CMOS sensors sensin g area to the window of interest. WS =1 for windows sc an. Window of interest X,Y 0,0 WX WY WW WH FVAL LVAL DVAL Window of interest X,Y 0,0 WX WY WW WH FVAL LVAL DVAL The X,Y start coordinate, the window width and height can [...]

CV-A33CL - 10 - 6.2. Sensor layout and timing. 6.2.1. Effective image format The drawing below shows the effective pixels on the CCD array with respect to pixels and lines as it is used in the timing and vide o read out. (0, 0) (658, 492) Active Pixel Array 659 493 Minimum window size 3 2 Fig. 13. Effective image layout 6.2.2. Vertical timing Norma[...]

CV-A33CL - 11 - 6.2.4. LVAL a-synchr onous accumulation The CV-A33CL has LVAL a-sy nchronous accumulations only. The accumulation will start 28 µ sec. after the trigger leading edge. EEN will indicate the accumulation time. When the accumulation stops after the selected shutter time, the LVAL phase is reset and restarted. 1 LVAL = 16.825 µ sec. 1[...]

CV-A33CL - 12 - 6.2.5. Timing for wind ow of interest With WS=1, the X and Y start coordinates (WX and WY), and the width and height (WW and WH) for the window of interest can be pr ogrammed with 1 pixel interval. Th e minimum window size is 2(h) x 3 (v). If the window is specified outside the full image area, it will be placed up to the right or l[...]

CV-A33CL - 13 - 6.3. Input/Output of Timing Signals 6.3.1. Input of Timing Signals It is not possible to synchronize the camera from an external sync source except by an extern trigger pulse. The camera will al ways run with its internal X-tal controlled timing. Trigger input through Camera Link. TI=0 Trigger input as TTL on pin #10 on 1 2 pin Hiro[...]

CV-A33CL - 14 - 6.4.1. Continuous Operation (Non triggered) Mode settings can be done with RS-232C. Trigger Mo de Normal. TR=0. It is for applications where the camera is continuous running without external trigger. The shutter mode can be norm al or programmable exposure. (SM=0, SM=1). The shu tter will work in all 8 steps up to 1/20,000 second or[...]

CV-A33CL - 15 - DVA L DA TA O UT FVA L LVA L EE N pe r iod E xpo su re T R G 27 .6 μ S ( When the e xpo su r ei s m i n . ( P E = 2 ) ) 01234 Eff e ct i v e L i n e s 493L 5L 4 8 8 4 9 0 4 8 9 4 9 1 4 9 2 …… …… 498L 1F V A L p e r i o d 2L 2L 502L 1 LVAL = 16.825 µ s Fig. 20. Vertical timing for edge pre-select min. exposure DVA L DA TA O[...]

CV-A33CL - 16 - 6.4.3. Pulse Width Co ntrol Mode The exposure will start 28 µ sec. after the trigger leading edge, and it stops and is read out at the trigger trailing edge. This mode will operate with full window or windows of inte rest scanning. An EEN pulse will indicate the active accumulation time, and a FVAL pu lse indicates that the resulti[...]

CV-A33CL - 17 - 6.4.4. Auto trigger Mode The auto trigger function, TR=3 can be used as sens ing device inside the camera field of view. It sense in a programmable window from top of the image. The continuous output is sent to the frame grabber, which P C should be programme d to sense if an object is passing the window. The horizontal position and[...]

CV-A33CL - 18 - 6.5. Other Functions. User ID. The command ( UD ) the user can save up to 16 characters in the camera to identify the camera. Bit Allocation. The command ( BA ) will select the number of bits in the Camera Link output to 8 o r 10 bit. Black Level. The command ( BL ) is fo r adjusting the video bl ack level (or set-up level). GAin le[...]

CV-A33CL - 19 - 7.2. RS-232C control All configuration of the CV-A33CL camera is done via the RS-232 C port on the 12 pin HR connector or via Camera Link. (Internal switch SW200 off for HR). The camera can be set up from a PC running terminal emulator software , or using JAI´s camera control software. Below is the description of the ASCII based sh[...]

CV-A33CL - 20 - 7.3. CV-A33CL command list Command Name Format Parameter Remarks A – General settings and useful commands EB Echo Back EB= [ Param. ] <CR><LF> 0=Echo off 1=Echo on Off at power up ST Camera Status request ST?<CR><LF> Actual setting HP Online Help request HP?<CR><LF> Command list VN Firmware vers[...]

CV-A33CL - 21 - 7.4. Camera Control Tool for CV-A33 From www.jai.com Camera Control Tool for Windows 98/NT/2000 can be downloaded. The control tool contents a camera control program and tools for m aking your own program. For the integrator and experienced user, the Camera Control Toll is much more than a program with a window interface. It also pr[...]

CV-A33CL - 22 - 8. External Appear ance and Dimensions ) ) 機銘版 17 .5 26 50 58 50 26 5 4 (0 .2 ) (2 .28 ) (0 .69 ) (1 .97 (1 .02 ) (1 .02 ) (1 .97 8 (0 .31 ) (0 .3 ) 7. 6 5 (0 .2 ) 44 35 C- Moun t (1 .7 3 ) (1 .38 ) /O DI GI T A L I IN / DC TR IG 定ﾈｼ ﾞ ｺﾈｸﾀｰ 固 U4-40 6- M3深4 4xM3 Depth 4 4- M3深 4xM3 Depth 4 Fig. 26. Outl[...]

CV-A33CL - 23 - 9.2. Specification table Specifications CV-A33CL Scanning system Progressive scan Pixel clock 40.000 MHz (25 nsec) Line frequency 59.44 kHz (673 pixels cl ock/line) (16.825 µ sec) Frame rate 118.4 frames/sec. (50 2 line s/frame) (8.4 4615 msec) CCD sensor 1/2” progress ive scan monochr ome CMOS image sensor: Mi cron MT9V403C12 ST[...]

CV-A33CL - 24 - 10. Appendix 10.1. Precautions Personnel not trained in dealing with similar elec tronic devices should not service this camera. The camera contains components sensitive to el ectrostatic discharge. The handling of these devices should follow the requirements of electrostatic se nsitive components. Do not attempt to disassemble this[...]

CV-A33CL - 25 - 11. Users Record Camera type: CV-A33CL Revision: (Revision A) Serial No. …………….. Firmware version. …………….. Camera ID. …………….. Model name. …………….. User ID. …………….. For camera revision hi story, please contact your local JAI d istributor. Users Mode Settings. Users Modifications. DECLA[...]