JVC AV-14FMT4, AV-21CMT4, AV-21DMT4, AV-21YMT4, AV-14AG14, AV-14AMG4, AV-14FMG4, AV-14FMG4B, AV-20NMG4, AV-21CG14, AV-21CMG4, AV-21DMG4, AV-21FMG4B, A manual

GGT0037-001A-H COLOUR TELEVISION MODEL WITH THE TELETEXT FUNCTION AV -14FMT4 AV -21CMT4 AV -21DMT4 AV -21YMT4 MODEL WITHOUT THE TELETEXT FUNCTION AV -14AG14 AV -14AMG4 AV -14FMG4 AV -14FMG4B AV -20NMG4 AV -21CG14 AV -21CMG4 AV -21DMG4 AV -21FMG4B AV -21LMG4 AV -21TG14 AV -21TMG4 AV -21YMG4 Contents Knowing your TV’ s features ....................[...]

2 Safety Instructions W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only fr om the power sour ce indicated on the rear of the TV . 2 Av oid damaging the pow er cord and mains plug. When unplugging [...]

3 3 2 8 6 7 9 5 1 4 0 1 9 2 3 7 5 0 4 6 8 Remote control buttons and basic functions RM-C1260 WITH THE TELETEXT FUNCTION (A V -14FMT4/A V -2 1CMT4/ AV -2 1DMT4/A V -2 1YMT4) RM-C1261 WITHOUT THE TELETEXT FUNCTION (A V -14AG14/A V -14AMG4/ AV -14FMG4/A V -14FMG4B/ AV -20NMG4/A V -2 1CG14/ AV -2 1CMG4/A V -2 1DMG4/ AV -2 1FMG4B/A V -2 1LMG4/ AV -2 1T[...]

4 Remote control buttons and basic functions How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2 .T o exit the MENU, press the DISPLA Y button 8 or choose EXIT menu. Display the top menu. Press 5 / ∞ buttons 3 to choose a menu title. Press ∞ button 3 to display the Then press MENU/OK button 2 .[...]

5 TV buttons and functions The following illustr ations are for A V -14FMG4 and A V -2 1T G14 only , which are used for e xplanation purpose . Y our TV may not look exactly like the illustr ated. Front of the TV AV -14FMG4 AV - 2 1T G14 Rear of the TV AV -14FMG4 A V -2 1TG14 OK MENU VIDEO AUDIO IN (VIDEO-2) 9 7 4 2 1 8 6 5 VIDEO -1 INPUT VIDEO AUDI[...]

6 Setting up your TV CA UTION • T urn off the equipment including the TV before connecting. 1 Connecting the aerial To install rod aerial Install into the top-rear aerial holder . Once installed, it cannot be remov ed. VIDEO AUDIO VIDEO -1 INPUT OUTPUT VIDEO AUDIO VIDEO-1 INPUT OUTPUT If you connect a VCR, connect the aerial output jack of y our [...]

7 Setting up your TV (continued) 5 Making the initial settings Set up your TV b y pressing any buttons e xcept PO WER button, then operate the TV menu by following the steps as belo w: 7 • Press the red button to cancel the SETUP T OUR REST AR T function. If you w ant to make initial settings again when the next time y ou turn on the TV , press t[...]

8 Basic setting for picture COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears . Press the COLOUR S YSTEM button to select a setting. AUTO PAL SECAM NTSC3.58 NTSC4.43 To operate this function with a menu: ❇ MENU PICTURE PICTURE FEATURES COLOUR SYSTEM F or the colour system in each countr[...]

9 Advance setting for pictur e BLUE BACK Y ou can set the TV to automatically change to a blue screen and mute the sound if the signal is w eak or absent, or when ther e is no input from an antenna. Select the BLUE B A CK in the INST ALL menu, then choose ON or OFF . Original features for pictur e TELETEXT Y ou can watch the T eletext broadcast cha[...]

10 Basic setting for sound Advanced setting for sound SOUND SYSTEM Y ou can select an appropriate sound sy stem when abnormal sound occurs e ven when the picture appears normally . Press the SOUND S YSTEM button to select a setting. B/G I D/K M The function is not av ailable in video mode. F or the sound system in each country or region, see the ta[...]

11 Fav orite channel and video setting To register the favorite channel Y ou can register and recall 4 fav orite channels by using the colour buttons (red, gr een, yellow , blue). 1 In TV mode, select a TV channel (PR01- 99) you desired to register . 2 Press and hold a colour button for 3 seconds or more. “F A VORITE CHANNEL 7 PROGRAMMED!” appe[...]

12 Customized setting VNR Y ou can reduce the noise. Select the VNR in the PICTURE FEA TURES menu under PICTURE menu, then choose a setting of VNR function. ❇ VNR MENU PICTURE PICTURE FEATURES OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If[...]

13 TV channel presetting To register the TV channels auto- matically Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. ❇ MENU INSTALL 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) a[...]

14 TV channel presetting To add in the new channel (INSERT in the EDIT menu) Y ou can add in the new channel in the TV channel list as you lik e. Y ou need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number correspond- ing to the channel number of the TV channel from the attached sheet “CH/CC number list” on this pag[...]

15 Additional pr eparation The illustrations sho wn in this section are for A V -14FMG4 only , which are used for explanation purpose . Y our TV may not look ex actly the same as illustrated. Before connecting • R ead the manuals provided with the de vices for the proper connection. • T urn off all the devices including the TV . • Note that c[...]

TV RF systems B/G, I, D/K, M Colour systems P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V , 50/60 Hz External input / output VIDEO-1: VIDEO input, AUDIO input VIDEO-2: VIDEO i[...]