JVC DT-V2000SU manual

INSTRUCTIONS DT -V2000SU MONIT OR PHASE DT-V2000SU CHROMA BRIGHT CONTRAST MENU SELECT C B A INPUT SELECT POWER ON OFF VOLUME/ENTER For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. : DT -V2000SU Serial No. : LCT0573-001A(6.5J) 00.12.20, 0:39 PM 1[...]

2 Thank you for purchasing this JVC DTV monitor . Before using it, read and follow all instructions carefully to take full advantage of the monitor ’ s capabilities. SAFETY PRECAUTIONS W ARNING : TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS MONITOR TO RAIN OR MOISTURE. FCC INFORMA TION CAUTION: Changes or modification not approved by JVC [...]

3 SAFETY PRECAUTIONS ............................................................................................... 2 CONTROLS AND FEA TURES ....................................................................................... 4 CONNECTIONS ..........................................................................................................[...]

4 CONTROLS AND FEA TURES FRONT VIEW <Front Panel> Speaker A built-in speaker is located in the right panel when the monitor is viewed from the front. MENU button Displays and turns off the menu screens. Notes: ● There are two menu screens: the <MAIN MENU> screen and the <SET -UP MENU> screen. ● T o display the <MAIN MENU>[...]

5 REAR VIEW <Rear Panel> AC INPUT INPUT A INPUT B INPUT C REMOTE IN/OUT AUDIO INPUT IN OUT IN (MONO) EXT SYNC OUT (RGB/COMPO.) (VIDEO) (RGB) Y/C G/Y B/P B /B-Y R/P R /R-Y HD/ C S VD AC INPUT INPUT A INPUT B INPUT C REMOTE IN/OUT AUDIO INPUT IN OUT IN (MONO) EXT SYNC OUT (RGB/COMPO.) (VIDEO) (RGB) Y/C G/Y B/P B /B-Y R/P R /R-Y HD/ C S VD 8 10 [...]

6 REMOTE IN/OUT terminal External control input and output terminal. Instead of using the INPUT SELECT button, an external control signal changes the INPUT mode. INPUT mode status data is also output through this terminal. * The terminal is DIN 8-pin (female). [REMOTE IN/OUT terminal specifications]  T o test e xternal control, shor t-circuit th[...]

7 AC INPUT INPUT A INPUT B INPUT C REMOTE IN/OUT AUDIO INPUT IN OUT IN (MONO) EXT SYNC OUT (RGB/COMPO.) (VIDEO) (RGB) Y/C G/Y B/P B /B-Y R/P R /R-Y HD/ C S VD CONNECTIONS Notes: ● Bef ore connecting your system, make sure that all units are turned off . ● The illustration below sho ws some e xamples of diff erent connections. T erminal connecti[...]

8 HOW TO HANDLE BASIC OPERA TIONS BASIC OPERA TION 1. Press the POWER POWER ON OFF switch to turn on the power . ON ( _ ): Power turns ON. (Power indicator lights in green.) OFF ( — ): P ower turns OFF . (P ower indicator goes out.) * The frequency of the input signals (or the color system or DTV format) is automatically identified and displayed [...]

9      ＜ＭＡＩＮ ＭＥＮＵ＞  ＳＩＺＥ／ＰＯＳＩＴＩＯＮ ＡＤＪ． ＤＩＳＴＯＲＴＩＯＮ ＡＤＪ． ＰＩＣＴＵＲＥ ＡＤＪ． ＦＵＮＣＴＩＯＮ ＳＥＬＥＣＴ ＳＴＡＴＵＳ ＤＥＧＡＵＳＳ ＳＥＬＥＣＴ： ＥＸＩＴ： ＭＥ?[...]

10 Y ou can adjust the screen size and screen position. This function can be set when an INPUT A component (COMPO .) signal or INPUT B (VIDEO) signal is input with the underscan size (UNDER) selected or when an INPUT A RGB signal or INPUT C PC (RGB) signal is input. 1 Press the MENU MENU button. The <MAIN MENU> screen appears. 2 Press the SEL[...]

11 Y ou can adjust the picture distortion. This function can be set when an INPUT A component (COMPO .) signal or INPUT B (VIDEO) signal is input with the underscan size (UNDER) selected or when an INPUT A RGB signal or INPUT C PC (RGB) signal is input. 1 Press the MENU MENU button. The <MAIN MENU> screen appears. 2 Press the SELECT SELECT bu[...]

12 Y ou can adjust the picture contrast, brightness, etc. 1 Press the MENU MENU button. The <MAIN MENU> screen appears. 2 Press the SELECT SELECT button to select the [PICTURE ADJ.] item. The selection mark ( 4 ) moves to the [PICTURE ADJ .] item. 3 Press the VOLUME/ ENTER button. The <PICTURE ADJ .> screen appears. 4 Press the SELECT S[...]

13 Items Contents RGB/COMPO. Sets the input signal of the INPUT A terminal to receive RGB or component (COMPO.) signals. (RGB p[ COMPO.) RGB : RGB signal is selected. COMPO. : component signal is selected. SCAN SIZE Sets the scan size when component (COMPO.) signals are input to the INPUT A terminal. (OVER p[ UNDER) OVER : standard scan size (95% o[...]

14 DISPLA Y OF PRESENT INPUT ST A TUS  Connection Between Input Mode Display and Frequency (or Color System or DTV Format) Display Input Mode INPUT A INPUT B INPUT C Input Signal RGB COMPONENT VIDEO Y/C RGB (PC) Frequency , Color System or DTV Format Signal Signal within the frequency range Signal without synchronization Signal outside the frequ[...]

15  Recommended Input Mode List Mode Resolution Horizontal Vertical Preset Frequency Frequency Horizontal V ertical (kHz) (Hz) NTSC 786 243 15.73 29.97 (i)  480i 720 244 15.73 29.97 (i)  480p 720 483 31.469 59.94  720p 1280 720 44.955 59.94  1080i 1920 540 33.75 30.00 (i)  VGA480 640 480 31.47 59.94  VESA600A 800 600 35.16 56.2[...]

16 Power Save Function Mode Normal Standby Suspended Mode Mode Mode Power 100% Less than Less than Consumption about 90% about 30% Power Lit Lit Blinks Indicator ( ) Shift Time — About 15 About 15 from Normal seconds seconds Mode Return Time — Immediate About 10 to to Normal 15 seconds Mode  POWER SA VE FUNCTION How the Power Save Function O[...]

17 Y ou can set the CONTROL LOCK function to disable control buttons and knobs on the front panel, except for the power switch. This function is set in the <SET -UP MENU> screen. 1 While pressing the SELECT SELECT button, press the VOLUME/ENTER button. The <SET -UP MENU> screen appears. 2 Press the SELECT SELECT button to select the [CO[...]

18 Items Contents BLUE DRIVE Adjusts the blue drive level. … Decreases the blue drive level. … Increases the blue drive level. RED DRIVE Adjusts the red drive level. … Decreases the red drive level. … Increases the red drive level. GREEN CUT OFF Sets the green cutoff point. … Decreases the green cutoff point. … Increases the green cutof[...]

19  SELECTING [ sub menu] IN PROCEDURE 4 Y ou can also adjust items in procedure 5 with only the selected item displayed. Use this if the full menu screen makes it difficult to observe the monitor image . 1 Select the [ sub menu] item in procedure 4. 2 Press the VOLUME/ ENTER button. The <sub menu> screen appears. (A single item is display[...]

20 Problems No power supply No picture with the power on No sound Wrong color Unnatural picture Shaking picture Points to be checked Is the power plug loosened or disconnected? Is the signal cable disconnected? Is the power of the connected component ON? Is the signal output from the connected component? Is the input signal selected correctly? Is t[...]

21 Problems Irregular color Wrong picture position, wrong picture size Front panel buttons and knobs do not function Points to be checked Is the monitor placed or moved close to a speaker or any other device incorporating a magnet? Has the position of the monitor been changed with the power on? Has the picture position, size or distortion been chan[...]

22 SPECIFICA TIONS  T ype : DTV monitor  Picture T ube : 20 ” measured diagonally , in-line gun, 90 ° deflection, dot-trio type (dot-trio pitch 0.26 mm)  Effective Screen Size : Width : 16 ” (406.4 mm) Height : 12 ” (304.8 mm) Diagonal : 20 ” (508 mm)  Scanning Frequency : H : 15 k/31 k — 65 kHz V : 50 — 100 Hz  Video Ba[...]

23 DTV Formats 480i 480p 720p 1080i Signal Standard ITU-R BT . 601-4 SMPTE 293M SMPTE 296M SMPTE 274M Scanning Lines/Frame 525 525 750 1125 Eff ective Sample 720 x 485 720 x 483 1280 x 720 1920 x 1080 x Scanning Lines Field Frequency (Hz) 59.94 59.94 60/59.94 60/59.94 Line Frequency (Hz) 15734 31468.5 45000/44955 33750/33716.25 Sampling Frequency ([...]

JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Valley Road Wayne, N.J. 07470 JVC CANADA INC. 21 Finchdene Square, Scarborough Ontario M1X 1A7 © 1999 VICT OR COMP ANY OF JAP AN, LIMITED DT-V2000SU MONITOR Printed in Japan LCT0537-001A 0699-K-U-Ni LCT0573-001A(6.5J) 00.12.20, 0:40 PM 24[...]