JVC GD-32X1U manual

GD-32X1U INSTRUCTIONS LCD Monitor LCD Monitor ◆ GD-32X1U 0909HHH-MW-MT 2009 Victor Company of J apan, Limited LCD Monitor ◆ INSTRUCTIONS LCT2576-001A-H EN GD32_covers_US.indd 1 GD32_covers_US.indd 1 09.9.16 1:31:50 PM 09.9.16 1:31:50 PM[...]

ENGLISH As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency. Please read the important notice for energy efficiency on page 49. Important Note: In the spaces below, enter the model and serial number of your monitor (located at the rear of the cabinet[...]

ii WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT. 1. Operate only from the power source specified on the unit. 2. Avoid damaging the AC plug and power cord. 3. Avoid improper installation and never position t[...]

iii Warnings Changes or modifications not approved by JVC could void the warranty. ● When you don’t use this monitor for a long period of time, be sure to disconnect both the power plug from the AC outlet and antenna for your safety. ● To prevent electric shock do not use this polarized plug with an extension cord, receptacle or other outlet [...]

iv 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician fo[...]

v Warnings 22) Use of power cords or AC adapters other than those provided may cause fire or malfunction. 23) DO NOT allow young children to play with the plastic bag that came with the monitor when you unpacked it. Failure to do so can result in suffocation, causing injury. 24) Avoid improper installation and never position the unit where good ven[...]

vi Warning To prevent an accidental fall To prevent injury, the monitor must be fixed to the floor/cabinet. Use bolts and nuts or screws (ø 4 mm, sold separately) to fix the monitor to the floor/cabinet utilizing the holes of the stand. 26) When installing the monitor on the wall, ask your dealer to install. 27) Make enough room for inserting and [...]

vii Warnings FCC Notice: Caution: Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr[...]

02 Features › More precise adjustment of picture quality with a wide range of adjustment properties ➔ page A-2 › Enjoy SLR digital camera photographs ➔ page A-11 › Slim cabinet provides you with greater freedom of choice for installation › Quick response making video games more exiting — Game Mode ➔ page A-5 › Operating HDMI devic[...]

03 Contents Contents Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 Included items 04 Inserting batteries into the remote control 04 Attaching the speaker unit 05 Installation 05 Connecting external devices[...]

04 Inserting batteries into the remote control When replacing the batteries To avoid short-circuit, place the minus end of the batteries first. ● Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like. ● Read the precautions on the battery. ● The batteries last about 6 to 12 months on regular usage. ● The[...]

05 Installation Attaching the covers ● Attach the HDMI cover (3) and AC terminal cover (5) after connections have been made. Fix the HDMI cover to the unit using the supplied screw. Break off the bottom right of the HDMI cover when you want to extend the HDMI cable backwards. ● Attach the D-sub cover (1), hook hole covers (2) and bottom covers [...]

06 Connecting external devices To connect a computer To connect a device with a composite terminal To connect a device with component terminals To INPUT-1/INPUT-2 terminals Green To connect a DVI device To connect an HDMI device ø 3.5 mm stereo mini plug To INPUT-1 terminal GD32X1_us_en.indb 06 GD32X1_us_en.indb 06 09.9.29 6:32:36 PM 09.9.29 6:32:[...]

07 Installation INPUT-1: HDMI TM terminal INPUT-2: HDMI TM terminal INPUT-3: D-sub 15 pin INPUT-4 : SD card slot, USB type slot ( ➔ page 36) AUDIO IN terminal : 3.5 mm stereo mini jack RS-232C terminal ( ➔ page 40) A: Video cable (supplied) B: Audio cable (supplied) C: Video cable (supplied) D: RS-232C extension cable (supplied) a: Component ca[...]

Menu Language Interactive Plug-in Menu English(EU) Set Previous 2/4 English(US) Suomi Français(EU) Français(US) Deutsch Ελληνιά Magyar Next English(EU) 08 Connecting the power cable/AC Adapter ● Ground the earth plug of the power cable to the earth terminal of the AC outlet. Initial settings When you turn on the monitor for the first tim[...]

09 Parts identification Parts identification Main unit Power indicator Lights while the monitor is on. Remote sensor Aim the remote control here. Turns the monitor on/off (on standby). INPUT Switches the input. MENU Opens the setting menu. Functions as the down cursor key in the menu operations. Functions as the left cursor key and the right cursor[...]

10 Remote control POWER Turns the monitor on/off (on standby). LINK Opens the photo viewer menu or the operation window for HDMI CEC devices. ( ➔ page 11) OPTION Opens the setup window of HDMI CEC devices. Opens the setting menu of the photo viewer ( ➔ page 38). MENU Opens the setting menu. ( ➔ page 12) EXIT Exits from the menu. (Cursor keys)[...]

Rec. Rec.Stop NA VIGA TION Function Operation Panel Speaker Device Operate Select Exit Input-1 Monitor Link >Recorder 11 Controlling HDMI devices Controlling HDMI devices You can control HDMI CEC devices connected to this monitor using the remote of the monitor. ● This function can be customized in the “ HDMI ” settings ( ➔ page 34). ●[...]

Memory Setting Load Preset Tint Tint Setting Color Contrast Contrast Setting Brightness Sharpness Picture Memory1 0 Page 1/3 0 0 0 0 12 Changing the settings Example: to change the setting of “ Color Temperature ” 1 Open the menu. 2 Select “ Picture ”. 3 Select “ Color Temperature ”. ● The item currently selected is shown in orange. 4[...]

Show Your True Colors. Technical information Adjust the picture to your needs A-2 Set up the monitor for your PC A-10 Enjoy SLR digital camera photographs A-11 Menu index by task A-12 GD32X1_us_en.indb A-1 GD32X1_us_en.indb A-1 09.9.29 6:32:37 PM 09.9.29 6:32:37 PM[...]

Memory Setting Load Preset Tint Tint Setting Color Contrast Contrast Setting Brightness Sharpness Picture Memory1 0 Page 1/3 0 0 0 0 To use a preset 1 Open the menu. 2 Select a memory from “ Memory Setting ” in “ Picture ”. ● When you select one of the memory, its settings are applied to the picture. 3 Select “ Load Preset ”, select o[...]

Adjust the picture to your needs To customize the settings You can create your own set of picture settings by arranging the settings of a preset. Storing several sets of settings helps you to enjoy a picture in the taste you like according to the viewing environment and characteristics of the source. 1 Open the menu. 2 Select the memory you want to[...]

Monitor Does not apply color adjustments or noise reductions. Input video signals are displayed as they are. Suitable for monitoring purpose. Standard The most standard setting. Photo Pro Suitable for watching still pictures of SLR digital cameras. ● Characteristics of the 10 presets Dynamic Makes pictures colorful and bright, suitable for watchi[...]

Game Gives priority to the response time for picture movement. Suitable for game consoles. Adjust the picture to your needs Option Suitable for displaying medical images including x-ray pictures. ● This setting is only for approximate presentation and does not conform to any official standard of medical imaging. ➔ See the following pages for th[...]

● Setting values of each preset ● The settings are subject to change for amelioration. Dynamic Standard Theater Monitor Tint 0000 Tint Setting BY Gain 0000 BY/RY Angle 0 + 2+ 30 Color +8 +4 +2 0 Contrast + 3 000 Contrast Setting Black Stretch High Medium Off Off Dynamic DC Offset On On On Off Auto Contrast On Off Off Off Brightness 00+ 2 0 Shar[...]

Adjust the picture to your needs Photo Pro Game Signage CCTV HD CCTV SD Option 000000 000000 000000 0 0 +5 +8 +14 0 0 0 0 + 4+ 50 Off Off Medium High High Off Off Off Off Off Off Off Off Off On On On Off 0000– 4 + 2 0 –15 –10 20 20 –30 Mode-3 Mode-3 Mode-3 Mode-1 Mode-1 Mode-3 – 1 5 00000 – 5 000+ 5 0 –15 0 –15 0 –5 0 +5 +10 +30 +[...]

Dynamic Standard Theater Monitor White Balance Setting R Drive / G Drive / B Drive 0 000 R Cutoff / G Cutoff / B Cutoff 0 000 Color Management Mode-1 Mode-2 Mode-3 Off Color Mngmt. Setting Red Tint / Red Color 0 000 Yellow Tint / Yellow Color 0 000 Green Tint / Green Color 0 000 Cyan Tint / Cyan Color 0 000 Skin Tint / Skin Color 0 000 Color : Brig[...]

Adjust the picture to your needs Photo Pro Game Signage CCTV HD CCTV SD Option 000000 000000 Off Mode-2 Mode-1 Mode-2 Mode-1 Off 000000 000000 000000 000000 000000 000000 000000 Mode-3 Mode-2 Mode-3 Mode-4 Mode-2 Mode-6 Off Medium Medium Medium High Off Auto Auto Auto Auto Auto Off Off Low Low Low Low Off On On On On On Off Off Off Off Off Off Off [...]

Set up the monitor for your PC Selecting the input signal When you connect a PC to the INPUT-3 terminal, set the type of the input signal accordingly. ● For signals in VGA60 and XGA60 Set “ Sampling Mode ” to “ Std ”. ( ➔ page 32) ● For signals in WVGA60 Set “ Sampling Mode ” to “ Wide ”. ( ➔ page 32) ● For signals in WXGA[...]

Enjoy SLR digital camera photographs When you select the picture preset of “ Photo Pro ” in “ Memory Setting ”, you can view the photographs just the way they were taken. You can also view photographs on an SD card or USB device using Photo viewer. ( ➔ page 36) If the picture is not aligned vertically, or letters on the screen look blurre[...]

Menu index by task Page Hue adjustment General tone of color Tint 14 Tone of color (including white) Color Temperature 19 Tone of color (in detail) White Balance Setting 19 Range of color representation Color Space 18 Amplitude of the color difference signal Tint Setting › BY Gain 14 Demodulation angle of the color difference signal Tint Setting [...]

13 Changing the settings : Picture Picture Memory Setting You can store up to 6 sets of the “ Picture ” settings and use them. ● When the input is changed, the memory used for the input last time is automatically applied. ■ Memory1 / Memory2 / Memory3 / Memory4 / Memory5 / Memory6 Load Preset You can load one of the presets below into a mem[...]

14 Tint Adjusts the tone of color. ■ –30 – +30 (Skin color reddish ↔ Skin color greenish) Tint Setting Adjusts the tone of color in detail. ● The setting is fixed to 0 and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”. ● The setting is fixed to 0 and unadjustable when “ Color Spac[...]

15 Changing the settings : Picture Contrast Adjusts the brightness of brighter areas of pictures. ■ –30 – +30 (Dark ↔ Bright) Contrast Setting Adjusts settings of functions relating with contrast. ● The functions are not available when “ Color Space ” is set to “ sRGB ” or “ AdobeRGB ”. ● The functions are not available when[...]

16 Sharpness Emphasizes outlines on a picture. ● The setting is unadjustable when “ Enhancer ” is set to “ Off ”. ■ –30 – +30 (Fuzzy ↔ Sharp) Enhancer Selects the frequency band enhanced by “ Sharpness ”. ■ Off : Deactivates the function. ■ Mode-1 / Mode-2 / Mode-3 (Emphasizes lower frequency band; for low-resolution pictu[...]

17 Changing the settings : Picture Backlight Setting Adjusts settings of functions relating with backlight. ◆ Smart Picture Reduces the backlight automatically in dazzling scenes. ■ On / Off ◆ Dynamic Backlight Reduces the backlight automatically in dark scenes to represent black deeper. ■ High / Medium / Low / Off Color System Selects the [...]

18 Color Matrix Selects the color matrix used for color conversion. ● The setting is fixed to “ Auto ” and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”. ● The setting is fixed to “ Auto ” and unadjustable when ” PC Monitor Mode ” is set to “ On ”. ● The setting is fixed t[...]

19 Changing the settings : Picture Color Temperature Adjusts the color temperature (color tone). The higher the color temperature, the more bluish the picture. ● The setting is fixed to “ Mode-5 ” and unadjustable when “ Color Space ” is set to “ sRGB ” or “ AdobeRGB ”. ● The setting is fixed to “ Mode-5 ” and unadjustable w[...]

20 Color Management Adjusts the total coloring of pictures. Three color management presets are available to suit a variety of color temperature settings. ● The setting is fixed to “ Off ” and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”. ● The setting is fixed to “ Off ” and unadju[...]

21 Changing the settings : Picture ◆ Green Tint / Green Color Adjusts the tone/colorfulness of green colors. ■ –15 – +15 (Yellow ↔ Cyan) / –30 – +30 (Dilute ↔ Dense) ◆ Cyan Tint / Cyan Color Adjusts the tone/colorfulness of blue colors. ■ –15 – +15 (Green ↔ Blue) / –30 – +30 (Dilute ↔ Dense) ◆ Skin Tint / Skin Colo[...]

22 Noise Reduction Adjusts the settings of picture noise reduction. ● The functions are unavailable when “ PC Monitor Mode ” is set to “ On ” or when signals in a PC signal format are coming in. ◆ Digital VNR Reduces picture noise. ■ Auto : Estimates the amount of noise automatically and applies suitable noise reduction processing. ?[...]

23 Changing the settings : Picture Natural Cinema Displays quick-moving parts on cinemas originally taken on films with more clarity. ● The setting is fixed to “ Off ” and unadjustable when “ Picture Delay Time ” is set to “ Short ”. ● The setting is fixed to “ Off ” and unadjustable when “ PC Monitor Mode ” is set to “ On[...]

24 Eco Mode Adjusts the brightness of backlight depending on the luminance of the room to reduce power consumption. ■ Display : Activating the function and indicating its performance. ■ On : Activating the function. Its performance is not indicated. ■ Off : Deactivates the function. Other ◆ Real Bit Driver Makes the gradation of 8 bit signa[...]

25 Changing the settings : Sound Sound ● The following settings are only adjustable when the dedicated speaker unit (sold separately) is connected. ● The following settings are not adjustable while using the Photo viewer ( ➔ page 36). Bass Adjusts bass tone. ■ –6 – +6 (Weaker ↔ Stronger) Treble Adjusts treble tone. ■ –6 – +6 (We[...]

26 PEQ Optimizes the sound quality for the dedicated speaker unit (TS-C32SPG: sold separately). When the speaker unit is connected, setting “ PEQ “ to “ On “ brings high and low tones into balance, making the sound clearer. Select “ Off “ when connecting other speakers. ● “ PEQ ” stands for “Parametric Equalizer”. ■ On / Off[...]

27 Changing the settings : Setup Setup Menu Language You can choose the language used for on-screen messages. ■ English (EU) / Deutsch / Français(UE) / Italiano / Español (UE) / Català / Nederlands / Dansk / Svenska / Norsk / Suomi / Polski / Magyar / Русский / Ελληνικά / Português / Česky / Български / Українс[...]

28 Aspect Adjusts the aspect of pictures. ● The setting is also adjustable through the [ASPECT] button on the remote control. ◆ Options when the current input signal is SD ■ Auto : When the video signal contains information about aspect ratio (WSS etc.), the aspect is switched accordingly. In other cases, the picture is displayed in either ?[...]

29 Changing the settings : Setup ◆ Options when the current input signal is HD ● You can select “ Full Native ” only when the input signal is 1080i/p. ■ Full : Stretching a picture to the width of the monitor. ■ Full Native : Displaying a picture of 1080i/p without enlargement. ■ Slim : Shrinking a picture horizontally. Black areas re[...]

30 Position Adjustment Adjusts the picture position on the monitor. ● Vertical adjustment is effective when “ Aspect ” is set to “ 14:9 Zoom ”, “ 16:9 Zoom ”, “ Panoramic ”, “ 16:9 Zoom Subtitle ”, or “ Panoramic Zoom ”. ● Horizontal adjustment is effective only when “ Aspect ” is set to “ Panoramic Zoom ”. ● W[...]

31 Changing the settings : Setup Input Label Adds a source name specifying a device after the source name (“ Input-1 ” - “ Input-3 ”). ■ (No label) / VCR / DVD / Blu-ray Disc / PVR / D-VHS / STB / SAT / AMP / GAME / CAM / DISC / PC 4:3 Aspect Setting Selects the aspect setting which is applied when “ Aspect ” ( ➔ page 28) is set to [...]

32 PC Setting Adjusts the settings for PC signals. ● The items below are unadjustable when no PC signal is input: “ H Size ”, “ V Size ”, “ Dot Clock ”, “ Clock Phase ”, “ PC Position Adjustment ”, and “ Auto Position Adjustment ”. ● “ Auto Position Adjustment ” is unavailable for INPUT-3. ● “ Dot Clock ” and ?[...]

33 Changing the settings : Setup ◆ Dot Clock Adjust this when the picture is not aligned vertically. ● The adjustment is kept after turning off the power. ■ –20 – +20 ◆ Clock Phase Adjust this when letters on the screen look blurred or swaying. ● The adjustment is kept after turning off the power. ■ 0 – 31 ◆ PC Position Adjustme[...]

34 HDMI Control with HDMI Makes an HDMI CEC-compatible external component controllable through this monitor. ■ On : Enables HDMI CEC control. ■ Off : Deactivates HDMI CEC control. One Touch Play Starting playback on an HDMI CEC-compatible external component automatically turns on the monitor and change its source to the component. ● The setti[...]

35 Changing the settings : HDMI AMP Control Makes an HDMI CEC-compatible amplifier controllable through the monitor. ● The setting is fixed to “ Off ” and unadjustable when “ Control with HDMI ” is set to “ Off ”. ■ On / Off Input-1 Audio Selects the audio signal type for INPUT-1. ■ Auto : Detects the type automatically. ■ Digit[...]

Viewing photographs on SD card/USB device Cautions ● Insert or remove SD cards and USB devices gently and in the right direction. Otherwise, the devices or the monitor may be damaged. ● It is recommended to keep a backup of your files. ● Do not connect a mouse, keyboard or the like. ● Do not use a USB hub or extension cable. 1 Insert an SD [...]

Viewing photographs on SD card/USB device ● To view the next/previous page, press [GREEN]/[RED]. ● When you turn on the monitor while both an SD card and a USB device are connected, the photographs on the SD card are displayed. Select “ Flash Device “ in the “ Device ” setting ( ➔ page 38) to display the photographs on the USB device.[...]

To customize the settings 1 Open the menu. 2 Change the settings. 3 Exit the menu. ◆ Device Select which device is displayed when both are connected; SD card or USB device. ◆ Sort Select the display order of photographs. ■ File Name : In alphabetic order by file name. ■ Date : In order of the date when the file was modified. ◆ Interval Ti[...]

Viewing photographs on SD card/USB device About SD cards and USB devices ● The maximum capacity of devices playable on this monitor is as follows: - SD cards, miniSD cards, microSD cards: 2 GB - SDHC cards, miniSDHC cards, microSDHC cards: 32 GB - USB devices: 32 GB ● When using miniSD cards or microSD cards, put them in an appropriate adapter [...]

40 External Control You can control GD-32X1U from external control equipment (a personal computer or a dedicated controller) via the RS-232C terminal on the rear of the monitor. ● Connect the RS-232C extension cable to the RS-232C terminal on the rear side of the monitor. ( ➔ page 07) Communication specifications Cable A crossover cable with a [...]

41 External Control Command outline To control the monitor from external control equipment, send operation commands to the monitor. Example of communication procedures 1 Operation command to select “ Input-3 ”. 2 Acknowledgment from the monitor. 3 The input is changed to “ Input-3 ”. Command structure a: Header ! : Operation command from th[...]

42 Command list ● “ * ” is the monitor ID. Normally, set it to “0x80”. ● Enter the appropriate data to “xx” or “x”. No. Operation commands 1 † ! 0x82 * P W x Lf 2 † ! 0x82 * I P x Lf 3 † ! 0x82 * V L x x Lf 4 † ! 0x82 * A M x Lf 5 † ! 0x82 * V S x Lf 6 † ! 0x82 * A S x Lf 7 ! 0x82 * R C xxxx L f 8 ! 0x82 * S U I C x [...]

43 External Control Functions Data Turns on/off the monitor. 0: Off 1: On +: Switches the power status. Selects the input. 1: Input-1 2: Input-2 3: Input-3 4: Input-4 Adjusts the volume. 00 – 50: Sets the volume directly. +: Turns the volume up. –: Turns the volume down. Turns muting on/off. 0: Mute is released. 1: The sound is muted. +: Switch[...]

44 Troubleshooting The following are not malfunctions. ● This LCD display is built with very high precision technology; however, be aware that a few pixels may be missing or constantly lit. ● When a still image is displayed for a long time, it may remain indistinctly on the screen after the picture has changed. The remaining picture will disapp[...]

45 Troubleshooting No sound. ● No sound is output from the monitor if the dedicated speaker unit (sold separately) is not connected. ( ➔ page 05) ● Press the MUTING button. ● Check the amplifier connection. ● When “ AMP ” is selected under “ Speaker ”, the sound is output from the amplifier, and not from the speakers of the monito[...]

46 Specifications Model name GD-32X1U LCD panel 32-inch (viewable) Screen size (visible area size measured diagonally) 801.3 mm (31.5’’) Display resolution 1920×1080 Display colors 1.07 billion colors (10 bit color) Viewing angle (TYP.) 178 ° (Horizontally) 178 ° (Vertically) Luminance (TYP.) 400 cd/m 2 Contrast ratio (TYP.) 4000 : 1 Horizon[...]

47 Specifications Notice on transportation ● This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. Supplied accessories ➔ page 04 Input terminals HDMI ×2, D-sub (15 pin) ×1, Audio input (3.5 mm stereo mini jack[...]

● Use screws of adequate length (M4 × 12 – 16) to fix the VESA bracket and wall mount adapter. 48 Dimensions unit: mm (inch) 1 : 496.1 (19 5/8) 2 : 55.0 (2 1/4) /80.0 (3 1/4) (with TS-C32SPG) 3 : 772.4 (30 1/2) 4 : 40.7 (1 5/8) 5 : 254.0 (10) 6 : 214.7 (8 1/2) 7 : 7.8 (3/8) 8 : 22.5 (1) 9 : 190.9 (7 5/8) 0 : 173.7 (6 7/8) - : 336.2 (13 1/4) = [...]

49 Specifications Logos & Licenses As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency. ● For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may slightly be different from actual products.[...]

50 Compliant signal formats (1) INPUT-3 terminal (PC) Signal Frequency Vertical (Hz) Horizontal (kHz) Dot clock (MHz) PC98 56.42 24.823 21.050 VGA 60 †1 59.94 31.469 25.175 VGA 72 72.81 37.861 31.500 VGA 75 75.00 37.500 31.500 WVGA 60 †2 60.00 31.020 33.750 SVGA 60 60.32 37.879 40.000 SVGA 72 72.19 48.077 50.000 SVGA 75 75.00 46.875 49.500 XGA [...]

51 Specifications Total pixels Effective pixels Standard pixel per line line per frame pixel per line line per frame 848 440 640 400 — 800 525 640 480 VESA Standard 832 520 640 480 VESA Standard 840 500 640 480 VESA Standard 1088 517 848 480 — 1056 628 800 600 VESA Standard 1040 666 800 600 VESA Standard 1056 625 800 600 VESA Standard 1344 806 [...]

52 INPUT-1, INPUT-2 terminal (HDMI-HDMI) Signal Frequency Vertical (Hz) Horizontal (kHz) Dot clock (MHz) VGA 60 59.94/60 31.469/31.5 25.175/25.2 480/60p 59.94/60 31.469/31.5 27/27.027 720/60p 59.94/60 44.955/45 74.176/74.25 1080/60i 59.94/60 33.716/33.75 74.176/74.25 480/60i 59.94/60 15.734/17.75 27/27.027 1080/60p* 59.94/60 67.433/67.5 148.352/148[...]

53 Specifications Total pixels Effective pixels pixel per line line per frame pixel per line line per frame 800 525 640 480 858 525 720 480 1650 750 1280 720 2200 562/563 1920 1080 858 262/263 720 480 2200 1125 1920 1080 864 625 720 576 1980 750 1280 720 2640 562/563 1920 1080 864 312/313 720 576 2640 1125 1920 1080 2750 1125 1920 1080 2640 1125 19[...]

54 ● This software is based in part on the work of the lndependent JPEG Group. ● The open source software is embedded in this product. For more information, please go to: http://www.jvc-victor.co.jp/download/lnx/09jvc_mo/index.html ● DejaVu font is used in this product under the license below. _________________________________________________[...]

55 Specifications Arev Fonts Copyright ------------------------------ Copyright (c) 2006 by Tavmjong Bah. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license (“Fonts”) and associated documentation files (the “Font Software”), to reproduce and distribute the[...]

56 Index Icons . . . . . . . . . . . . . . . . . . . . . 10 Numbers 3DY/C . . . . . . . . . . . . . . . . . . . . . 22 4:3 Aspect Setting . . . . . . . . . . 31 1080 Auto Setting . . . . . . . . . . 31 A AMP Control . . . . . . . . . . . . . . . 35 Aspect . . . . . . . . . . . . . . . . . . . . . 28 ASPECT . . . . . . . . . . . . . . . . . . . . 10[...]

57 Index L LINK . . . . . . . . . . . . . . . . . . . . . . . 11 Lip Sync . . . . . . . . . . . . . . . . . . . 25 M Main unit . . . . . . . . . . . . . . . . . . 09 MENU . . . . . . . . . . . . . . . . . . . . . 12 Menu Language . . . . . . . . . . . 27 MUTING . . . . . . . . . . . . . . . . . . . 10 N Natural Cinema . . . . . . . . . . . . 23 Noi[...]

GD32X1_us_en.indb 56 GD32X1_us_en.indb 56 09.9.29 6:32:45 PM 09.9.29 6:32:45 PM[...]

GD-32X1U INSTRUCTIONS LCD Monitor LCD Monitor ◆ GD-32X1U 0909HHH-MW-MT 2009 Victor Company of J apan, Limited LCD Monitor ◆ INSTRUCTIONS LCT2576-001A-H EN GD32_covers_US.indd 1 GD32_covers_US.indd 1 09.9.16 1:31:50 PM 09.9.16 1:31:50 PM[...]