JVC KD-G116 manual

ENGLISH CD RECEIVER KD-G116/KD-G115 KD-G116/KD-G115 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0252-001A [U/UH] Cover_KD-G116_001A_f.indd 2 10/15/04, 5:42:01 PM[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUT I ON : Do not open the top cover. There are no user serviceable parts inside the uni[...]

3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-G116/KD-G115 ............... 5 Parts identification ................................. 5 Getting started ...............[...]

4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: Press briefly. Press repeatedly. Press either one. Press[...]

5 ENGLISH Control panel — KD-G116/KD-G115 Display window 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (select) button p MO (monaural) button q SSM (Strong-station Sequential Memory) button w CD button e FM/AM button r RPT (repeat) b[...]

6 ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. ~ Ÿ You[...]

7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then adjust the hour. 2 Se[...]

8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step Ÿ above... 1 2 Select the[...]

9 ENGLISH 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Sel[...]

10 ENGLISH All tracks will be played repeatedly until you stop playback. To stop play and eject the disc Disc operations Playing a disc Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track number To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous [...]

11 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected Mode Plays repeatedly TRK RP T : The current track. • RPT lights up. RP T OFF : Cancels repeat play. Random play Ex.: When “DISC RND” is selected Mode Pl[...]

12 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ E x.: When “ ROCK ” is selected Indication pattern for each sound mode: Indication For: Preset values BAS * 1 TRE * 2 LOUD * 3 USER (Flat sound) 00 00 OFF ROCK Rock or disco music +03 +01 ON CLASSI[...]

13 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.) TRE* 1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD* 2 (fader) Adjust the [...]

14 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. DEMO OFF : Cancels. CLOCK H Hour adjustment 1 – 12, [7] [Initial: 1 (1:00)] CLOCK M Minute adjustment 00 – 59, [7] [Initial: 00 (1:0[...]

15 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN14-19_KD-G116[U_UH] f .indd 15 10/6/04, 7[...]

16 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player [...]

17 ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search... – All previously stored stations are erased [...]

18 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset [...]

19 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic disto[...]

© 2004 Victor Company of Japan, Limited EN, TH 1004DTSMDTJEIN Rear_KD-G116_001A_ f .indd 2 10/14/04, 10:44:30 AM[...]

KD-G116/KD-G115 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0252-004A [U/UH] 1004DTSMDTJEIN EN, TH ENGLISH This receiver is designed to operate on 1 2 V DC, N EGA T IVE g round e le ctri cal syste ms. If your vehicle does not have this system, a voltage inverter is required, which can be purchase[...]

ELECTRICAL CONNECTIONS T o prevent short circuits, we recommend that you disconnect the batteryʼs negative terminal and make all electrical connections before installing the receiver . • B e sure to g round t his re cei ver to the c ar ’ s ch assi s agai n af ter ins tall atio n. Not es : • Replace the fuse with one of the specified rating.[...]

ENGLISH INDONESIA CD RECEIVER KD-G116/KD-G115 ALA T PENERIMA CD KD-G116/KD-G115 For canceling the display demonstration, see page 7. Untuk membatalkan tampilan demonstrasi, lihat halaman 7. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah. INSTRUCTIONS BUKU PETUNJUK GET025[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUT I ON : Do not open the top cover. There are no user serviceable parts inside the uni[...]

3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-G116/KD-G115 ............... 5 Parts identification ................................. 5 Getting started ...............[...]

4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: Press briefly. Press repeatedly. Press either one. Press[...]

5 ENGLISH Control panel — KD-G116/KD-G115 Display window 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (select) button p MO (monaural) button q SSM (Strong-station Sequential Memory) button w CD button e FM/AM button r RPT (repeat) b[...]

6 ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. ~ Ÿ You[...]

7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then adjust the hour. 2 Se[...]

8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step Ÿ above... 1 2 Select the[...]

9 ENGLISH 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Sel[...]

10 ENGLISH All tracks will be played repeatedly until you stop playback. To stop play and eject the disc Disc operations Playing a disc Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track number To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous [...]

11 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected Mode Plays repeatedly TRK RP T : The current track. • RPT lights up. RP T OFF : Cancels repeat play. Random play Ex.: When “DISC RND” is selected Mode Pl[...]

12 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ E x.: When “ROCK” is selected Indication pattern for each sound mode: Indication For: Preset values BAS * 1 TRE * 2 LOUD * 3 USER (Flat sound) 00 00 OFF ROCK Rock or disco music +03 +01 ON CLASSIC [...]

13 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.) TRE* 1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD* 2 (fader) Adjust the [...]

14 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. DEMO OFF : Cancels. CLOCK H Hour adjustment 1 – 12, [7] [Initial: 1 (1:00)] CLOCK M Minute adjustment 00 – 59, [7] [Initial: 00 (1:0[...]

15 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN14-19_KD-G116[U_UH] f .indd 15 10/6/04, 7[...]

16 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player [...]

17 ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search... – All previously stored stations are erased [...]

18 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset [...]

19 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic disto[...]

© 2004 Victor Company of Japan, Limited EN, IN 1004DTSMDTJEIN Rear_KD-G116_003A_f.indd 2 10/12/04, 9:03:25 AM[...]

KD-G116/KD-G115 Installation/Connection Manual Manual Pemasangan/Penyambungan GET0252-006A [UN] 1004DTSMDTJEIN EN, IN ENGLISH This receiver is designed to operate on 12 V DC, NEGA TIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. INDONESIA Ala[...]

15 ELECTRICAL CONNECTIONS T o prevent short circuits, we recommend that you disconnect the battery ’ s negative terminal and make all electrical co fore installing the receiver . • B e sur e to gro und t his r ec eive r to th e car ’ s ch ass is ag ain a ft er in sta lla tion . Notes: • Replace the fuse with one of the speci fi ed rating. [...]

ENGLISH CD RECEIVER KD-G116/KD-G115 KD-G116/KD-G115 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0252-007A [UT] Cover_KD-G116_007A_f.indd 2 10/15/04, 5:43:18 PM[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUT I ON : Do not open the top cover. There are no user serviceable parts inside the uni[...]

3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-G116/KD-G115 ............... 5 Parts identification ................................. 5 Getting started ...............[...]

4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: Press briefly. Press repeatedly. Press either one. Press[...]

5 ENGLISH Control panel — KD-G116/KD-G115 Display window 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (select) button p MO (monaural) button q SSM (Strong-station Sequential Memory) button w CD button e FM/AM button r RPT (repeat) b[...]

6 ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. ~ Ÿ You[...]

7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then adjust the hour. 2 Se[...]

8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step Ÿ above... 1 2 Select the[...]

9 ENGLISH 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Sel[...]

10 ENGLISH All tracks will be played repeatedly until you stop playback. To stop play and eject the disc Disc operations Playing a disc Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track number To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous [...]

11 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected Mode Plays repeatedly TRK RP T : The current track. • RPT lights up. RP T OFF : Cancels repeat play. Random play Ex.: When “DISC RND” is selected Mode Pl[...]

12 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ E x.: When “ROCK” is selected Indication pattern for each sound mode: Indication For: Preset values BAS * 1 TRE * 2 LOUD * 3 USER (Flat sound) 00 00 OFF ROCK Rock or disco music +03 +01 ON CLASSIC [...]

13 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.) TRE* 1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD* 2 (fader) Adjust the [...]

14 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. DEMO OFF : Cancels. CLOCK H Hour adjustment 1 – 12, [7] [Initial: 1 (1:00)] CLOCK M Minute adjustment 00 – 59, [7] [Initial: 00 (1:0[...]

15 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN14-19_KD-G116[U_UH] f .indd 15 10/6/04, 7[...]

16 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player [...]

17 ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search... – All previously stored stations are erased [...]

18 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset [...]

19 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic disto[...]

© 2004 Victor Company of Japan, Limited EN, CT 1004DTSMDTJEIN Rear_KD-G116_007A_f.indd 2 10/15/04, 12:05:41 PM[...]

KD-G116/KD-G115 Installation/Connection Manual GET0252-008A [UT] 1004DTSMDTJEIN EN, CT ENGLISH This receiver is designed to operate on 1 2 V DC, N EGA T IVE g round e le ctri cal syste ms . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. J Handles F W asher (ø5) G Lock nut[...]

15 ELECTRICAL CONNECTIONS T o prevent short circuits, we recommend that you disconnect the batteryʼs negative terminal and make all electrical connections before installing the receiver . • B e sure to g round t his re cei ver to the c ar ’ s ch assi s agai n af ter ins tall atio n. Not es : • Replace the fuse with one of the specified rati[...]