Lenovo 8089 manual

Hard w ar e M a in t e n a n c e Ma nu a l Ty p e s 808 6, 808 7 , 808 8, 808 9 Ty p e s 809 0 , 8094[...]

[...]

Hard w ar e M a in t e n a n c e Ma nu a l Ty p e s 808 6, 808 7 , 808 8, 808 9 Ty p e s 809 0 , 8094[...]

Note: Before using this information and the pr oduct it supports, be sure to read the information under “Notices,” on page 155. Sixth Edition (March 2008) © Copyright Lenovo 2005, 2008. Portions © Copyright International Business Machines Corporation 2005. All rights reserved. LENOVO products, data, computer softwar e, and services have been [...]

Contents Chapter 1. About this manual . . . . .1 Important Safety Information . . . . . . . . .1 Strategy for replacing FRUs for CT O, CMV , and GA V products . . . . . . . . . . . . . . . .2 Product definition . . . . . . . . . . .2 FRU Identification for CTO, CMV , and GA V products . . . . . . . . . . . . . . .2 Important information about repla[...]

Automatic configuration and power interface (ACPI) BIOS . . . . . . . . . . . . . 152 Automatic Power-On featur es . . . . . . . 152 Recovering software using the Rescue and Recovery program . . . . . . . . . . . . 153 Starting the Rescue and Recovery workspace 153 Appendix. Notices . . . . . . . . . 155 T elevision output notice . . . . . . . . . [...]

Chapter 1. About this manual This manual contains service and refer ence information for ThinkCentre ® computers listed on the cover . It is intended only for trained servicers who are familiar with Lenovo ® computer products. Before servicing a Lenovo pr oduct, be sure to read the Safety Information. See Chapter 2, “Safety information,” on p[...]

Strategy for replacing FRUs for CTO, CMV , and GA V products Product definition Dynamic Configure To Order (CTO) This provides the ability for a customer to configur e a Lenovo solution from an eSite, and have this configuration sent to fulfillment, wher e it is built and shipped directly to the customer . The machine label, PC Entitlement W arehou[...]

4. Under W arranty Information, type the MT and Serial number and click Submit . The list of key commodities is returned in the PEW r ecord under Component Information. v Business Partners using Eclaim will access PEW when performing Entitlement Lookup. Business Partners will enter Loc ID, MT and Serial, and the key commodities will be returned in [...]

So, if the parts are not compliant originally , replacement parts can also be noncompliant, but in all cases, if the parts are compliant, the replacement parts must also be compliant. Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s r equirements and schedu[...]

Chapter 2. Safety information This chapter contains the safety information that you need to be familiar with before servicing a computer . General safety Follow these rules to ensur e general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Ensure you can stand safely [...]

CAUTION: Electrical current from power , telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedures.[...]

v Always look carefully for possible hazar ds in your work area. Examples of these hazards ar e moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the r eflective surface of a plastic dental mirror . The surface is conductive; such touching can cause personal inju[...]

5. Check for any obvious alterations. Use good judgment as to the safety of any alterations. 6. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 7. Check for worn, frayed, or pinched cables. 8. Check that the power-supply cover fasteners (scr ews[...]

Safety notices (multi-lingual translations) The caution and danger safety notices in this section are pr ovided in the following languages: v English v Arabic v Brazilian/Portuguese v Chinese (simplified) v Chinese (traditional) v French v German v Hebrew v Italian v Korean v Spanish DANGER Electrical current fr om power , telephone and communicati[...]

CAUTION: When replacing the lithium battery , use only Part Number 33F8354 or an equivalent type battery recommended by the manufacturer . If your system has a module containing a lithium battery , replace it only with the same module type made by the same manufacturer . The battery contains lithium and can explode if not properly used, handled, or[...]

CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. 1 2 CAUTION: Do not place a[...]

12 Hardwar e Maintenance Manual[...]

Chapter 2. Safety information 13[...]

≥ 18 kg (37 lbs) ≥ 32 kg (70.5 lbs) ≥ 55 kg (121.2 lbs) 1 2 14 Hardwar e Maintenance Manual[...]

PERIGO A corrente elétrica pr oveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: v Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste pr oduto durante uma tempestade com raios. v Conecte todos os cabos de alimentação a tomad[...]

CUIDADO: Ao substituir a bateria de lítio, utilize apenas uma bateria com Número de Peça 33F8354 ou um tipo de bateria equivalente recomendado pelo Se o seu sistema possui um módulo com uma bateria de lítio, substitua-o apenas por um módulo do mesmo tipo e do mesmo fabricante. A bateria contém lítio e pode explodir se não for utilizada, ma[...]

CUIDADO: O botão de controle de alimentação do dispositivo e o botão para ligar/desligar da fonte de alimentação não desligam a corrente elétrica fornecida ao dispositivo. O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegur e que todos os cabos de alimentação este[...]

18 Hardwar e Maintenance Manual[...]

1 2 Chapter 2. Safety information 19[...]

20 Hardwar e Maintenance Manual[...]

Chapter 2. Safety information 21[...]

1 2 22 Hardwar e Maintenance Manual[...]

DANGER Le courant électrique provenant de l’alimentation, du téléphone et des câbles de transmission peut présenter un danger . Pour éviter tout risque de choc électrique : v Ne manipulez aucun câble et n’effectuez aucune opération d’installation, d’entretien ou de r econfiguration de ce produit au cours d’un orage. v Branchez to[...]

A TTENTION: Remplacer la pile au lithium usagée par une pile de référence identique exclusivement, (référence 33F8354), ou suivre les instructions du fabricant qui en définit les équivalences. Si votre système est doté d’un module contenant une pile au lithium, vous devez le remplacer uniquement par un module identique, produit par le m?[...]

≥ 18 kg (37 lbs) ≥ 32 kg (70.5 lbs) ≥ 55 kg (121.2 lbs) A TTENTION: Soulevez la machine avec précaution. A TTENTION: L’interrupteur de contrôle d’alimentation de l’unité et l’interrupteur dubloc d’alimentation ne coupent pas le courant électrique alimentantl’unité. En outre, le système peut être équipé de plusieurs cordon[...]

VORSICHT An Netz-, T elefon- und Datenleitungen können gefährliche Spannungen anliegen. Aus Sicherheitsgründen: v Bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, W artungs- oder Rekonfigurationsarbeiten durchführen. v Gerät nur an eine Schutzkontaktsteckdose mit ordnungsgemäß geerdetem Schutzk[...]

CAUTION: Eine verbrauchte Lithiumbatterie nur durch eine Batterie mit der T eilenummer 33F8354 oder eine gleichwertige, vom Hersteller empfohlene Batterie ersetzen. Enthält das System ein Modul mit einer Lithiumbatterie, dieses nur durch ein Modul desselben T yps und von demselben Hersteller ersetzen. Die Batterie enthält Lithium und kann bei uns[...]

≥ 18 kg ≥ 32 kg ≥ 55 kg ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein. Um die Stromversorgung für die Einheit vollständig zu unterb[...]

Chapter 2. Safety information 29[...]

30 Hardwar e Maintenance Manual[...]

1 2 Chapter 2. Safety information 31[...]

PERICOLO La corrente elettrica pr oveniente dai cavi di alimentazione, del telefono e di comunicazione può essere pericolosa. Per evitare il rischio di scosse elettriche: v Non collegare o scollegare qualsiasi cavo oppure effettuare l’installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale. v Collegare tutti i fili[...]

A TTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo il Numero parte 33F8354 o un tipo di batteria equivalente consigliato dal produttore. Se sul sistema è presente un modulo che contiene una batteria al litio, sostituirlo solo con un tipo di modulo dello stesso tipo della stessa casa di produzione. La batteria contiene litio e[...]

≥ 18 kg ≥ 32 kg ≥ 55 kg A TTENZIONE: Prestare attenzione nel sollevare l’apparecchiatura. A TTENZIONE: Il pulsante di controllo dell’alimentazione presente sull’unità e l’interruttore dell’alimentatore non disattivano l’alimentazione corrente fornita all’unità. E’ possibile che l’unità disponga di più cavi di alimentazio[...]

Chapter 2. Safety information 35[...]

1 2 36 Hardwar e Maintenance Manual[...]

Chapter 2. Safety information 37[...]

PELIGRO La corriente eléctrica procedente de cables de alimentación, teléfonos y cables de comunicación puede ser peligrosa. Para evitar el riesgo de descarga eléctrica: v No conecte ni desconecte los cables ni realice ninguna tarea de instalación, mantenimiento o reconfiguración de este producto durante una tormenta eléctrica. v Conecte to[...]

PRECAUCIÓN: Cuando sustituya una batería de litio, utilice solamente una batería número de pieza 33F8354 u otra de tipo equivalente recomendada por el fabricante. Si su sistema dispone de un módulo que contiene una batería de litio, reemplácelo sólo con el mismo tipo de módulo, del mismo fabricante. La batería contiene litio y puede explo[...]

≥ 18 kg ≥ 32 kg ≥ 55 kg PRECAUCIÓN: Adopte procedimientos seguros al levantar el equipo. PRECAUCIÓN: El botón de control de alimentación del dispositivo y el interruptor de alimentación de la fuente de alimentación no desconectan la corriente eléctrica suministrada al dispositivo. Además, el dispositivo podría tener más de un cable [...]

Chapter 3. General information This chapter provides general information that applies to all machine types supported by this publication. The Access IBM program Use the Access IBM ® program for general information about the use, operation, and maintenance of the computer . The Access IBM program also contains information to help solve problems and[...]

Specifications This section lists the physical specifications for your computer . Dimensions Height: 89 mm (3.5 in.) W idth: 276 mm (10.9 in.) Depth: 273 mm (10.7 in) W eight Minimum configuration as shipped: 6.0 kg (13.2 lb) Maximum configuration: 6.4 kg (14.0 lb) Environment Air temperature: Operating at 0 - 3000 ft (914.4 m): 10° to 35°C (50°[...]

Chapter 4. General Checkout Attention The drives in the computer you are servicing might have been r earranged or the drive startup sequence changed. Be extremely car eful during write operations such as copying, saving, or formatting. Data or programs can be overwritten if you select an incorrect drive. General error messages appear if a pr oblem [...]

d. Observe the LEDs and refer to the following table. Power LED Green diagnostic LED Y ellow diagnostic LED Action ON ON OFF This is the normal condition of the LEDs when the power is OK. OFF OFF OFF Make sure the power cor d is attached to a working electrical outlet. If the electrical outlet is OK, replace the power supply . OFF (after the power [...]

1. Are the exact machine type and models 2. Have the same BIOS level 3. Have the same adapters/attachments in the same locations 4. Have the same address jumpers/terminators/cabling 5. Have the same software versions and levels 6. Have the same Diagnostics Diskette (version) 7. Have the same configuration options set in the system 8. Have the same [...]

46 Hardwar e Maintenance Manual[...]

Chapter 5. Diagnostics using PC-Doctor for DOS Diagnostics are pr ovided by the PC-Doctor program for DOS. These include a full range of diagnostic utilities to determine the operating condition of the computer ’s hardwar e components. Yo u can the run diagnostics fr om the Rescue and Recovery ™ workspace or you can create a bootable diagnostic[...]

Starting PC-Doctor from a diagnostic diskette or CD-ROM Note: If your computer has no internal diskette drive, an external USB diskette drive is requir ed when using the diagnostic diskette. 1. If your computer is already on when you start this pr ocedure, shut down the operating system and turn off the computer . 2. Insert the diskette or CD-ROM i[...]

T est selection To select one or more tests, use the following procedur e. 1. Open the corresponding test category . 2. Using the cursor movement keys, highlight the desired test. 3. Press the space bar . A selected test is marked by >> . Pressing the space bar again de-selects a test and removes the >>. 4. Repeat steps 2 and 3 above to[...]

available for test, what tests are available for the device, device pr operties, and so on. To change testing parameters, you modify the FDA T .INI file in PC Doctor for DOS. FDA T consists of the following subtests and features. Fixed-Disk T ests: v Seek T ests: - checks the physical operation of the drive head. – Linear Seek – Random Seek –[...]

channel buffer must be kept high in or der to maintain a speed advantage over other data transfer modes. In order to use the UDMA channel during testing, users must disable the multitasking feature. Destructive versus non-destructive testing: Most of the tests found in FDA T are non-destructive. This means that PC-Doctor program will pr eserve any [...]

The Full Erase Hard Drive pr ovides a DOS utility that performs the following: v Performs all the steps in Quick Erase. v Provides a DOS utility that writes random data to all sectors of the har d drive. v Provides an estimate of time to completion along with a visual r epresentation of completion status. v Provides messages that warn the user abou[...]

Chapter 6. Using the Setup Utility The Setup Utility program is stor ed in the electrically erasable programmable read-only memory (EEPROM) of the computer . The Setup Utility program is used to view and change the configuration settings of the computer , regar dless of which operating system you are using. However , the operating-system settings m[...]

Password considerations If you are setting any of the various types of passwor ds on your computer , you should read and understand the following information: v If you type an incorrect passwor d, you will see an error message. If you type an incorrect passwor d three consecutive times, you must turn the computer off and start again. v If you set b[...]

Attention Make sure that the IDE Drive Master passwor d is stored in a safe place. If both the IDE Drive User password and the IDE Drive Master passwor d are lost or forgotten, the IDE har d disk drive must be replaced. If both the IDE Drive User Password and the IDE Drive Master Passwor d are to be set, the IDE Drive Master Password must be set be[...]

Selecting a startup device If the computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use one of the following pr ocedures to select a startup device. Selecting a temporary startup device Use this procedur e to startup from any boot device. Note: Not all CDs, hard disks, and diskettes are startabl[...]

Chapter 7. Symptom-to-FRU Index The Symptom-to-FRU index lists error symptoms and possible causes. The most likely cause is listed first. Always begin with Chapter 4, “General Checkout,” on page 43. This index can also be used to help you decide which FRUs to have available when servicing a computer . If you are unable to corr ect the problem u[...]

1. T urn off the computer and disconnect all external devices. 2. Power-on the computer . 3. There ar e three LEDs to help you determine if the power supply and system board ar e working correctly . The power button LED is located on the front of the computer and the two diagnostic LEDs are located on the power supply at the rear of the computer . [...]

Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See “Running diagnostics tests” on page 48 for the specific type for information about the Diagnostic programs. In the following index, X can repr esent any number . Diagnostic Error Code FRU/Action 000-000-XXX BIOS T est Passed No action 000-0[...]

Diagnostic Error Code FRU/Action 000-039-XXX BIOS DMI data error 1. Flash the system. See “Flash update procedures” on page 150 2. System board 000-195-XXX BIOS T est aborted by user Information only Re-start the test, if necessary 000-196-XXX BIOS test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to r[...]

Diagnostic Error Code FRU/Action 001-027-XXX System Configuration/Setup error 1. Run Setup 2. Flash the system. See “Flash update procedur es” on page 150 3. System board 001-032-XXX System Device Controller failur e System board 001-034-XXX System Device Buffer Allocation failur e 1. Reboot the system 2. Flash the system. See “Flash update p[...]

Diagnostic Error Code FRU/Action 001-199-XXX System test failed, cause unknown 1. Go to “Undetermined problems” on page 88 2. Flash the system and re-test 3. Replace component under function test 001-250-XXX System ECC error System board 001-254-XXX 001-255-XXX 001-256-XXX 001-257-XXX System DMA error System board 001-260-XXX 001-264-XXX System[...]

Diagnostic Error Code FRU/Action 001-281-XXX System IRQ14 (hard disk drive) failur e 1. Hard disk drive cable 2. Hard disk drive 3. System board 001-282-XXX System IRQ15 failure 1. Device on IRQ15 2. System board 001-286-XXX 001-287-XXX 001-288-XXX System T imer failure System board 001-292-XXX System CMOS RAM error 1. Run Setup and re-test 2. Syst[...]

Diagnostic Error Code FRU/Action 005-031-XXX V ideo Device Cable failure 1. V ideo cable 2. Monitor 3. V ideo card, if installed 4. System board 005-032-XXX V ideo Device Controller failur e 1. V ideo card, if installed 2. System board 005-036-XXX V ideo Register error 1. V ideo card, if installed 2. System board 005-038-XXX System BIOS extension f[...]

Diagnostic Error Code FRU/Action 006-195-XXX Diskette interface T est aborted by user Information only Re-start the test, if necessary 006-196-XXX Diskette interface test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 006-197-XXX Diskette interface test warning 1. If a component is call[...]

Diagnostic Error Code FRU/Action 01 1-195-XXX Serial port T est aborted by user Information only Re-start the test, if necessary 01 1-196-XXX Serial port test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 01 1-197-XXX Serial port test warning 1. Make sure the component that is called o[...]

Diagnostic Error Code FRU/Action 014-03X-XXX 014-04X-XXX Parallel port failure System board 014-195-XXX Parallel port T est aborted by user Information only Re-start the test, if necessary 014-196-XXX Parallel port test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 014-197-XXX Parallel[...]

Diagnostic Error Code FRU/Action 015-034-XXX USB port buffer allocation failure 1. Reboot the system 2. Flash the system and re-test. See “Flash update procedur es” on page 150 3. Run memory test 4. System board 015-035-XXX USB port Reset condition detected 1. Remove USB device(s) and re-test 2. System board 015-036-XXX USB port Register error [...]

Diagnostic Error Code FRU/Action 018-196-XXX PCI Card test halt, err or threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 018-197-XXX PCI Card test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 53 2. Re-run test [...]

Diagnostic Error Code FRU/Action 020-198-XXX PCI test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 53 2. Flash the system and re-test. See “Flash update procedur es” on page 150 3. Go to “Undetermined problems” on page 88 020-199-XXX PCI test failed,[...]

Diagnostic Error Code FRU/Action 025-198-XXX IDE interface test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 53 2. Flash the system and re-test. See “Flash update procedur es” on page 150 3. Go to “Undetermined problems” on page 88 025-199-XXX IDE in[...]

Diagnostic Error Code FRU/Action 030-198-XXX SCSI interface test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 53 2. Flash the system and re-test. See “Flash update procedur es” on page 150 3. Go to “Undetermined problems” on page 88 030-199-XXX SCSI [...]

Diagnostic Error Code FRU/Action 071-00X-XXX 071-01X-XXX 071-02X-XXX Audio port error 1. Run Setup 2. Flash the system. See “Flash update procedur es” on page 150 3. System board 071-03X-XXX Audio port failure 1. Speakers 2. Microphone 3. Audio card, if installed 4. System board 071-04X-XXX Audio port failure 1. Run Setup 2. Audio card, if inst[...]

Diagnostic Error Code FRU/Action 080-196-XXX Game Port interface test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 080-197-XXX Game Port interface test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on p[...]

Diagnostic Error Code FRU/Action 086-197-XXX Mouse Port interface test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 53 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 086-198-XXX Mouse Port [...]

Diagnostic Error Code FRU/Action 170-0XX-XXX V oltage Sensor(s) failure 1. Flash system 2. System board 170-195-XXX V oltage Sensor(s) T est aborted by user Information only Re-start the test, if necessary 170-196-XXX V oltage Sensor(s) test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file[...]

Diagnostic Error Code FRU/Action 175-197-XXX Thermal Sensor(s) test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 53 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 175-198-XXX Thermal Sensor[...]

Diagnostic Error Code FRU/Action 215-000-XXX CD-ROM Drive T est Passed No action 215-XXX-XXX CD-ROM Drive error 1. CD-ROM Drive Cable 2. Check power supply voltages 3. CD-ROM drive 4. System board 217-000-XXX Hard Disk Drive T est Passed No action 217-25X-XXX 217-26X-XXX Hard Disk Drive (IDE) err or 1. Hard Disk Drive Cable 2. Check power supply vo[...]

Diagnostic Error Code FRU/Action 415-000-XXX Modem T est Passed No action 415-XXX-XXX Modem error Remove the Modem and re-test the system Chapter 7. Symptom-to-FRU Index 79[...]

Beep symptoms Beep symptoms are short tones or a series of short tones separated by pauses (intervals without sound). See the following examples. Beeps Description 1-2-X v One beep v A pause (or break) v Tw o beeps v A pause (or break) v Any number of breaks 4 Four continuous beeps Use the following table to diagnose beep symptoms. Beep Symptom FRU[...]

Beep Symptom FRU/Action 2-2-4 CMOS configuration info validation failed 1. Battery 2. System Board 2-3-1 Screen initialization failed 1. Jumper on J28 2. System Board 2-3-2 Screen memory failed System board 2-3-3 Screen r etrace failed System board 1-2 Search for video ROM failed System board All other beep code sequences System board Continuous be[...]

No-beep symptoms Symptom/Error FRU/Action No beep during POST but computer works correctly . System board No beep during POST . 1. See “Undetermined problems” on page 88. 2. System Board 3. Memory Module 4. Any Adapter or Device 5. Riser Card 6. Power Cord 7. Power Supply 82 Hardwar e Maintenance Manual[...]

POST error codes Each time you power-on the system, it performs a series of tests that check the operation of the system and some options. This series of tests is called the Power-On Self-T est , or POST . POST does the following operations. v Checks some basic system-board operations v Checks the memory operation v Starts the video operation v V e[...]

POST Error Code FRU/Action 191 System Security: Embedded Security hardwar e Reset If problem persists, r eplace the system board 192 System Security: Embedded Security hardwar e tamper detected If problem persists, r eplace the system board 193 System Security: Embedded Security hardwar e Removed If problem persists, r eplace the system board 194 S[...]

POST Error Code FRU/Action 1801 PCI/PnP Error! No Space A vailable to Shadow ROM 1. Run Setup and verify PCI/ISA configuration settings. 2. Run diagnostics. 3. Replace PCI Adapter 1802 PCI/PnP Error! Not Enough I/O Space A vailable 1. Run Setup and verify PCI/ISA configuration settings. 2. Run diagnostics. 3. Replace PCI Adapter 1803 PCI/PnP Error![...]

Miscellaneous error messages Message/Symptom FRU/Action CMOS Backup Battery inaccurate 1. CMOS Backup Battery (see Chapter 2, “Safety information,” on page 5) 2. System Board Changing colors Display/Monitor Computer will not power-of f. See “Power Supply Errors” on page 57. 1. Power Switch 2. System Board 3. Riser card Computer will not RPL[...]

Message/Symptom FRU/Action ″ Insert a Diskette ″ icon appears with a known-good diagnostics diskette in the first 3.5-inch diskette drive. 1. System Board 2. Diskette Drive Cable 3. Riser card 4. Network Adapter Intensity or color varies from left to right of characters and color bars 1. Display 2. System Board No power or fan not running 1. Se[...]

Message/Symptom FRU/Action Some or all keys on the keyboard do not work 1. Keyboard 2. Keyboard Cable 3. System Board Undetermined problems Check the power supply voltages (see “Power Supply Errors” on page 57). If the voltages are corr ect, return here and continue with the following steps. 1. Power-of f the computer . 2. Remove or disconnect [...]

Chapter 8. Replacing FRUs Important Before you r eplace any FRU, read Chapter 2, “Safety information,” on page 5. These precautions and guidelines will help you work safely . FRU replacements ar e to be done by trained service technicians only . This chapter does not contain a remove and r eplace procedure for all FRUs. Only the major FRUs are [...]

Locating the connectors on the rear The following illustration shows the locations of the connectors on the rear of the computer . 1 PCI adapter slot 8 Ethernet connector 2 Integrated cable lock slot 9 USB connectors 3 Mouse connector 10 Audio line out connector 4 Keyboard connector 11 Audio line in c[...]

Locating components The following illustration will help you locate the various components in the computer . 1 PCI riser 5 Hard disk drive 2 Power supply assembly 6 Cable clip on PCI riser 3 Optical drive eject button 7 Rear fan bracket assembly 4 Optical drive Chapter 8. Replacing FRUs 91[...]

Identifying parts on the system board 1 Hard disk drive connector 8 Speaker connector 2 Optical drive connector 9 Memory connector 1 3 PCI riser connector 10 Memory connector 2 4 12v power connector 11 Rear fan connector 5 Power connector 12 S ATA connector 6 Front fan connector 1[...]

4. Make sure the notch 1 on the new memory module is aligned corr ectly with the connector key 2 on the socket. Insert the memory module straight down into the connector until it snaps into position and the retaining clips ar e closed. 5. Go to “Completing the FRU replacement.” on page 104. Removing and replacing a PCI adapter This [...]

4. Remove the PCI riser from the computer by pulling straight up on the blue handle provided. 5. Pivot the blue adapter latch upward and r emove the failing adapter . 6. Remove the new adapter from its static-pr otective package. 7. Install the new adapter into the PCI connector in the riser . 8. Pivot the adapter latch down to retain the adapter .[...]

2. Pivot the drive bay assembly upward to gain access to the system boar d. 3. Locate the rear fan bracket assembly . See “Locating components” on page 91. 4. Lift the rear fan bracket assembly up to gain access to the battery . 5. Remove the old battery . 6. Install the new battery . 7. Replace the rear fan bracket assembly . 8. Go to “Compl[...]

Removing and replacing the power supply Attention Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, curr ent, and energy levels are pr esent inside any component that has this label attached. There ar e no servicable parts inside these components. 1. Open the cover . See “Opening the co[...]

7. Install the new power supply and insert the four screws that hold the power supply in place. 8. Replace the PCI riser . See “Removing and replacing a PCI adapter” on page 93. 9. Reconnect all power supply cables to the system board and the drives. See “Identifying parts on the system board” on page 92. Make sur e the cables are correctly[...]

7. Remove the heat sink from the micr oprocessor by gently twisting the heat sink to break the seal formed by the thermal gr ease and lifting it straight up. 8. Place the heat sink on its side on a clean work surface so that the thermal grease is not contaminated. 9. Use the handle at the rear of the system boar d to pull the system board and tray [...]

10. To remove the micropr ocessor 1 from the failing system board, lift the small handle 2 on the micropr ocessor socket to its maximum vertical position. Carefully lift the micr oprocessor off the socket. 11 . To install the microprocessor on the new system boar d, position the micropr ocessor socket handle on the new system board to t[...]

20. Go to “Completing the FRU replacement.” on page 104. Removing and replacing the microprocessor 1. Open the cover . See “Opening the cover” on page 90. 2. Loosen the two captured scr ews that secure the heat sink clamps 2 . Pivot the clamps to the side to allow the heat sink 1 to be removed. 3. Remove the heat sink from the m[...]

7. Position the micropr ocessor so that the pins are aligned with the socket and with the beveled corner 1 on the micropr ocessor is aligned in the socket as shown. 8. Lower the handle until it is fully in the down position and locked into the socket. This secures the micr oprocessor in the socket. 9. Remove the cleaning pad from its package [...]

Removing and replacing an optical drive 1. Open the cover . See “Opening the cover” on page 90. 2. Push the optical drive eject button and slide the optical drive out of the front of the computer . 3. Slide the new drive into the bay until it is latched into position. 4. Go to “Completing the FRU replacement.” on page 104. 102 Hardwar e Mai[...]

Removing and replacing a hard disk drive 1. Open the cover . See “Opening the cover” on page 90. 2. Pivot the drive bay assembly upward to gain access to the har d disk drive. 3. Disconnect the signal and power cables from the r ear of the hard disk drive. 4. Lift the hard disk drive and bracket up to r emove it from the drive bay . 5. Note the[...]

10. Go to “Completing the FRU replacement..” Completing the FRU replacement. After replacing FRUs, you need to install any r emoved parts, replace the cover , and reconnect any cables, including telephone lines and power cor ds. Also, depending on the FRU that is replaced, you might need to confirm the updated information in the Setup Utility p[...]

Chapter 9. FRU lists Note: A CRU (Customer Replaceable Unit) is identified by a single asterisk (*) or two asterisks (**) in the CRU ID column. An N in the CRU ID Column means that the part is not a CRU. A single asterisk (*) means that the part is a T ier 1 CRU; two asterisks (**) mean that the part is a T ier 2 CRU. Machine T ype 8086 1 2 3 4 5 6[...]

Item # 8086 FRUs FRU# CRU 3 200 W power supply-Hipro PFC (models 42U 42F 42G 43U 44E 44J 45J 46U 46F 47J 48J 49U 49F 4AG 4BJ 4DJ 4EJ 3AS 3AP 3AL 3AD 3A Y 41Q 41B 41H 42S 42P 42L 42D 42Y 46S 46P 46L 46D 46Y 49S 49P 49L 49D 49Y 4CC ARG B2K B3K B4K 1BA 1BT 1DK 1FK 1GK 1HJ 1JJ 1KJ 1LJ 3LJ 3MJ 3NJ 4FJ 4GJ B1B B1H 1BQ 1BV 1EB 1EH 4HC A3S A3P A3L A3Y 11 J[...]

Item # 8086 FRUs FRU# CRU 6 CD-ROM (24x) Plus Ultrabay Enhanced Drive (models 14J 21S 21U 21G 11 J A4J A5U A8S A8Y 15U 16U 18U 19U 21F 24U 27E 27J 29J 35U 36U 36F A5S A5Y A5G A6G A6C A6V A8G A9J 18S 18L 18Y 2BA 2BQ 2BT 2BC 2BB 2BH 2BV 2BK 35C 35B 35H 36S 36P 36L 36D 36Y 36G 36M 36A 36Q 36T 36C 36B 36H 36V 36K 36R 36E 36J CTO AEJ AFJ AJU AKU ALG 2GE[...]

Item # 8086 FRUs FRU# CRU 8 Speaker Cable assembly (all models) 03R0294 * 9 Heat Sink (models A3S A3P A3L A3Y 11 J 14J 21S 22S 22P 22L 22Y 32S 32P 32L 32Y 21U 21G 34U A4J A5U A3U A8S A8Y 13S 13L 13Y 18U 19U 21F 22U 24U 25U 26G 27E 27J 28J 29J 2AJ 32U 35U 36U 36F 37G A5S A5Y A5G A6G A6C A6V A9J A8G 18S 18L 18Y 2BA 2BQ 2BT 2BC 2BB 2BH 2BV 2BK 2CJ 35C[...]

Item # 8086 FRUs FRU# CRU 10 Micropr ocessor - 3.4GHZ Prescott P4 (models CTO-U CT O-G 41A 41Q 41T 41B 41H 42U 42F 42S 42P 42L 42D 42Y 42G 43U 44E 44J 45J 46U 46F 46S 46P 46L 46D 46Y 47J 48J 49U 49F 49S 49P 49L 49D 49Y 4AG 4BJ 4CC 4DJ 4EJ 4FJ 4GJ 4HC) 29R7265 ** 11 System board, 10/1000, no POV (models 1GK 1HJ 1JJ 1KJ 1LJ 3LJ 3MJ 3NJ 4FJ 4GJ A3S A3[...]

8086 FRUs FRU# CRU Bezel, Ultra-Bay-Enhanced (all models) 89P6804 * HSS T ray assembly (includes grommet/pins/brkt/gnd springs) (all models) 89P6778 * Power/LED cable assembly with bracket (all models) 89P6779 * Chassis, (includes: cover , fans, chassis base, planar mounting bracket, etc.) (all models) 89P6780 ** PATA HDD cable (all models) 89P6785[...]

8086 FRUs FRU# CRU RJ1 1 connector adapter (Switzerland) (All ″ G ″ models) 60H6055 * 8086 Keyboards (Standard PS/2 Black) FRU# CRU US English (models A3L 22L 32L 21U 21G 34U A3U A5U 13L 15U 16U 17U 18U 19U 22U 24U 25U 26G 27E 32U 35U 36U 37G A5G A6G A6C A8G 18L 2BA 2BC 2BH 35C 35H 36L 36G 36M 36A 36C 36H 36R 36E CTO AJU AKU ALG 1AU ABU 2FU 2GE[...]

8086 Keyboards (Standard PS/2 Black) FRU# CRU Thailand (models 2BT 36T 1BT CTO-A) 89P8334 * T urkish 440 (models 21G 26G 37G A5G A6G A8G 36G CTO-G ALG 42G 4AG ARG) 89P8335 * T urkish 179 (models 21G 26G 37G A5G A6G A8G 36G CTO-G ALG 42G 4AG ARG) 89P8336 * UK English (models 21G 26G 37G A5G A6G A8G 36G CTO-G ALG 42G 4AG ARG) 89P8337 * US Euro (model[...]

8086 W indows XP Pro Recovery CDs FRU# CRU US/UK/AP/TH (models A3L 22L 32L 21U 21G 34U A3U A5U 13L 15U 16U 17U 18U 19U 22U 24U 25U 26G 27E 32U 35U 36U 37G A5G A8G 18L 2BA 2BQ 2BT 2BH 35H 36L 36G 36M 36A 36Q 36T 36H 36R 36E CTO-U CT O-G AJU AKU ALG 1AU ABU 2FU 2GE 2JU 3AU 3AL 3BE 3DU 41A 41Q 41T 41H 42U 42L 42G 43U 44E 46U 46L 49U 49L 4AG ARG B1H 1B[...]

8086 Power Cords FRU# CRU Power Cord (models A3S A3P A3L 21S 22S 22P 22L 32S 32P 32L 21U 21G 34U A3U A5U A8S 13S 13L 15U 16U 17U 18U 19U 21F 22U 24U 25U 26G 32U 35U 36U 36F 37G A5S A5G A6G A6V A8G 18S 18L 2BA 2BT 2BV 36S 36P 36L 36D 36G 36A 36T 36V CTO-U CTO-G AJU AKU ALG 1AU ABU 2FU 2JU 3AU 3AF 3AS 3AP 3AL 3AD 3DU 41A 41T 42U 42F 42S 42P 42L 42D 4[...]

Machine T ype 8087 1 2 3 4 5 6 8 7 9 10 11 12 13 Item # 8087 FRUs FRU# CRU 1 To p Cover (all models) 89P6782 * 2 PCI riser card and bracket assembly (all models) 89P6790 * 3 200 W power supply-Hipro PFC (models 36U 36F 36S 36P 36L 36D 36Y 36G 36M 36A 36T 36C 36B 36H 36V 36K 36R 36J 36Q 35M CTO A1M 21M 22M) 89P6805 ** 4 Hard disk drive 40GB 7200rpm [...]

Item # 8087 FRUs FRU# CRU 4 Hard disk drive 120GB 7200rpm EIDE A T A-100 (models CTO) 40Y8759 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 71P7297 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y8762 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y9035 * 5 Front Rotating Cage assembly (all models) 39M0612 ** 6[...]

Item # 8087 FRUs FRU# CRU 10 Micropr ocessor - 2.8GHZ Northwood P4 (models CTO) 19R1522 ** 10 Micropr ocessor - 3.0GHZ Northwood P4 (models CTO) 19R1524 ** 10 Micropr ocessor - 3.2GHZ Northwood P4 (models CTO) 19R1526 ** 10 Micropr ocessor - 3.0GHZ Prescott P4 (models CTO) 19R1528 ** 10 Micropr ocessor - 3.0GHZ Prescott P4 (models CTO) 19R1530 ** 1[...]

8087 FRUs FRU# CRU Battery 3.0V (all models) 33F8354 * Mouse, PS/2 - 2-button (Black)(models CTO) 24P0383 * Mouse, PS/2 - 3-Button (Ball) Wheel Mouse (models CTO) 24P0491 * Mouse, Scrollpoint Optical (models CT O) 24P0499 * Mouse, optical wheelmouse (models 36U 36F 36S 36P 36L 36D 36Y 36G 36M 36A 36T 36C 36B 36H 36V 36K 36R 36J 36Q 36E 35M CTO A1M [...]

8087 Keyboards (Standard PS/2 Black) FRU# CRU Hebrew (models 36G CT O-G) 89P8315 * Hungarian (models 36G CTO-G) 89P8316 * Iceland (models 36G CTO-G) 89P8317 * Italian 141 (models 36G CTO-G) 89P8318 * Italian 142 (models 36G CTO-G) 89P8319 * Japanese (models 36J) 89P8320 * Korean (models 36K) 89P8321 * LA Spanish (models 36S 36D 36Y CTO-L) 89P8322 *[...]

8087 W indows XP Home Recovery CDs FRU# CRU PO (models CTO-G) 39J6268 * RU (models CTO-G) 39J6265 * HU (models CTO-G) 39J6267 * CZ (models CTO-G) 39J6263 * TR (models CTO-G) 39J6266 * GK (models CTO-G) 39J6269 * 8087 W indows XP Pro Recovery CDs FRU# CRU US/UK/AP/TH (models 36U 36L 36G 36M 36A 36T 36H 36R 36Q 36E 35M CTO A1M 21M 22M) 39J6414 * FR/C[...]

8087 Power Cords FRU# CRU Power Cord (ANZ) (models 36M 35M A1M 21M 22M) 13F9939 * Power Cord (EMEA, ANZ, ASEAN Eng, Kor ea) (models 36G 36K 36R CTO-G) 13F9978 * Power Cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models 36G 36H CT O-G) 14F0032 * Power Cord (EMEA) (models 36G CT O-G) 13F9996 * Power Cord (EMEA, LA) (models 36S 36P 36L 36D 36Y 36G CT O-G) 14F[...]

Machine T ype 8088 1 2 3 4 5 6 8 7 9 10 11 12 13 Item # 8088 FRUs FRU# CRU 1 To p Cover (all models) 89P6782 * 2 PCI riser card and bracket assembly (all models) 89P6790 * 3 200 W power supply-Hipro PFC (models 99U 99F 99S 99P 99L 99D 99Y 99G 99M 99A 99Q 99T 99C 99B 99H 99V 99K 99J CTO) 89P6805 ** 4 Hard disk drive 40GB 7200rpm EIDE A T A-100 (mode[...]

Item # 8088 FRUs FRU# CRU 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 71P7297 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y8762 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y9035 * 5 Front Rotating Cage assembly (all models) 39M0612 ** 6 CD-ROM (24x) Plus Ultrabay Enhanced Drive (models 99U 99F 99S 99P 99L[...]

Item # 8088 FRUs FRU# CRU 10 Micropr ocessor - 3.0GHZ Northwood P4 (models CTO) 19R1524 ** 10 Micropr ocessor - 3.2GHZ Northwood P4 (models CTO) 19R1526 ** 10 Micropr ocessor - 3.0GHZ Prescott P4 (models CTO) 19R1528 ** 10 Micropr ocessor - 3.0GHZ Prescott P4 (models CTO) 19R1530 ** 10 Micropr ocessor - 3.0GHZ Prescott P4 (models 35M CTO) 19R1532 *[...]

8088 FRUs FRU# CRU Mouse, PS/2 - 3-button (Ball) Wheel Mouse (models CTO) 24P0491 * Mouse, Scrollpoint Optical (models CT O) 24P0499 * Mouse, optical wheelmouse (models 99U 99F 99S 99P 99L 99D 99Y 99G 99M 99A 99Q 99T 99C 99B 99H 99V 99K 99J CTO) 89P5089 * PCI Modem Card (Soft), AT X V .90 (models CTO) 22P7943 * IEEE 1394 Adapter -Firewir e (models [...]

8088 Keyboards (Standard PS/2 Black) FRU# CRU Italian 141 (models 99G CTO-G) 89P8318 * Italian 142 (models 99G CTO-G) 89P8319 * Japanese (models 99J) 89P8320 * Korean (models 36K) 89P8321 * LA Spanish (models 99S 99D 99YCTO-L) 89P8322 * Norwegian (models 99G CTO-G) 89P8323 * Polish (models 99G CTO-G) 89P8324 * Portuguese (models 99G CTO-G) 89P8325 [...]

8088 W indows XP Home Recovery CDs FRU# CRU CZ (models CTO-G) 39J6263 * TR (models CTO-G) 39J6266 * GK (models CTO-G) 39J6269 * 8088 W indows XP Pro Recovery CDs FRU# CRU US/UK/AP/TH (models 99U 99L 99G 99M 99A 99Q 99T 99H) 39J6414 * FR/CF (models 99F 99G) 39J6415 * GR (models 99G) 39J6416 * IT (models 21G 21F 26G 36F 37G A5G A8G 36G) 39J6418 * BR [...]

8088 Power Cords FRU# CRU Power Cord (EMEA, LA) (models 99S 99P 99L 99D 99Y 99G) 14F0068 * Power Cord (APU) (models 99Y) 36L8879 * Power Cord (Japan) (models 99J) 1838576 * Power Cord (China, HK) (models 99C 99B 99H) 02K0545 * Power Cord (EMEA) (models 99G) 14F0086 * Power Cord (EMEA, ANZ, ASEAN Eng) (models 99G) 14F0014 * Power Cord (EMEA) (models[...]

Machine T ype 8089 1 2 3 4 5 6 8 7 9 10 11 12 13 Item # 8089 FRUs FRU# CRU 1 To p Cover (all models) 89P6782 * 2 PCI riser card and bracket assembly (all models) 89P6790 * 3 200 W power supply-Hipro PFC (models 11 U 12U 21U 22U 71G 72G 73G 74G 75G C1U C2U C3U C4U CTO 31U 32U 76G 77G C5U 23S 23D 13G) 89P6805 ** 4 Hard disk drive 40GB 7200rpm EIDE A [...]

Item # 8089 FRUs FRU# CRU 4 Hard disk drive 80GB 7200rpm Serial ATA (models CTO) 40Y8761 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 71P7297 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y8762 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y9035 * 5 Front Rotating Cage assembly (all models) 39M0612 ** 6 CD-R[...]

Item # 8089 FRUs FRU# CRU 10 Micropr ocessor - 2.8GHZ Northwood P4 (models CTO) 19R1513 ** 10 Micropr ocessor -3.06GHZ Northwood P4 (models CTO) 19R1515 ** 10 Micropr ocessor - 2.6GHZ Northwood P4 (models CTO) 19R1520 ** 10 Micropr ocessor - 2.8GHZ Northwood P4 (models CTO) 19R1522 ** 10 Micropr ocessor - 3.0GHZ Northwood P4 (models CTO) 19R1524 **[...]

8089 FRUs FRU# CRU Rear air deflector (all models) 89P6793 * Miscellaneous hardwar e kit (all models) 89P6794 * Battery 3.0V (all models) 33F8354 * Mouse, PS/2 - 2-button (Black)(models CTO) 24P0383 * Mouse, PS/2 - 3-button (Ball) Wheel Mouse (models CTO) 24P0491 * Mouse, Scrollpoint Optical (models CT O) 24P0499 * Mouse, optical wheelmouse (models[...]

8089 Keyboards (Standard PS/2 Black) FRU# CRU Hebrew (models 71G 72G 73G 74G 75G CT O-G 76G 77G 13G) 89P8315 * Hungarian (models 71G 72G 73G 74G 75G CTO-G 76G 77G 13G) 89P8316 * Iceland (models 71G 72G 73G 74G 75G CTO-G 76G 77G 13G) 89P8317 * Italian 141 (models 71G 72G 73G 74G 75G CTO-G 76G 77G 13G) 89P8318 * Italian 142 (models 71G 72G 73G 74G 75[...]

8089 W indows XP Home Recovery CDs FRU# CRU TR (models CTO-G) 39J6266 * GK (models CTO-G) 39J6269 * 8089 W indows XP Pro Recovery CDs FRU# CRU US/UK/AP/TH (models 11 U 12U 21U 22U 71G 72G 73G 74G 75G CTO-U CTO-G 31U 32U 76G 77G 13G) 39J6414 * FR/CF (models 71G 72G 73G 74G 75G CTO-U CT O-G 76G 77G 13G) 39J6415 * GR (models 71G 72G 73G 74G 75G CTO-G [...]

Machine T ype 8090 1 2 3 4 5 6 8 7 9 10 11 12 13 Item # 8090 FRUs FRU# CRU 1 To p Cover (all models) 89P6782 * 2 PCI riser card and bracket assembly (all models) 89P6790 * 3 200 W power supply-Hipro PFC (models 11 U A1U A2U 12U 21U 22U 71G 72G C1U C2U C3U C4U C5U C6U C7U A3U 23C 24B CTO A5U A7U 14U 26U 31U 32U 73G 73U 74U A4S A4Y A6S A6Y 13S 13Y 25[...]

Item # 8090 FRUs FRU# CRU 4 Hard disk drive 80GB 7200rpm Serial ATA (models CTO) 40Y8761 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 71P7297 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y8762 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y9035 * 5 Front Rotating Cage assembly (all models) 39M0612 ** 6 CD-R[...]

Item # 8090 FRUs FRU# CRU 10 Micropr ocessor - 2.6GHZ Northwood P4 (models CTO) 19R2421 ** 10 Micropr ocessor - 2.8GHZ Northwood P4 (models CTO) 19R2423 ** 10 Micropr ocessor - 2.66GHZ Northwood P4 (models CTO) 19R151 1 ** 10 Micropr ocessor - 2.8GHZ Northwood P4 (models CTO) 19R1513 ** 10 Micropr ocessor -3.06GHZ Northwood P4 (models CTO) 19R1515 [...]

8090 FRUs FRU# CRU S ATA HDD cable (all models) 89P6786 * Ultra Bay Enhanced Cable/Card assembly 89P6787 ** 60 mm front fan (all models) 89P6788 * C-2 switch cable assembly (all models) 09K9827 * V ertical stand (all models) 89P6792 * Rear air deflector (all models) 89P6793 * Miscellaneous hardwar e kit (all models) 89P6794 * Battery 3.0V (all mode[...]

8090 Keyboards (Standard PS/2 Black) FRU# CRU Danish (models 71G 72G CTO-G 73G A8G) 89P8308 * Dutch (models 71G 72G CTO-G 73G A8G) 89P8309 * French (models 71G 72G CT O-G 73G A8G) 89P8310 * German (models 71G 72G CTO-G 73G A8G) 89P8313 * Greek (models 71G 72G CT O-G 73G A8G) 89P8314 * Hebrew (models 71G 72G CT O-G 73G A8G) 89P8315 * Hungarian (mode[...]

8090 W indows XP Home Recovery CDs FRU# CRU PL (models CTO-G) 39J6262 * PO (models CTO-G) 39J6268 * RU (models CTO-G) 39J6265 * HU (models CTO-G) 39J6267 * CZ (models CTO-G) 39J6263 * TR (models CTO-G) 39J6266 * GK (models CTO-G) 39J6269 * CS (models 23C) 30R4777 * HK (models 24B) 27K6746 * 8090 W indows XP Pro Recovery CDs FRU# CRU US/UK/AP/TH (mo[...]

8090 Power Cords FRU# CRU Power Cord (EMEA) (models 71G 72G CT O-G 73G A8G) 13F9996 * Power Cord (EMEA, LA) (models 71G 72G CT O-G A4S A4Y A6S A6Y 13S 13Y 25S 25Y 73G A8G) 14F0068 * Power Cord (APU) (models A4Y A6Y 13Y 25Y) 36L8879 * Power Cord (EMEA) (models 71G 72G CT O-G 73G A8G) 14F0086 * Power Cord (EMEA, ANZ, ASEAN Eng) (models 71G 72G CT O-G[...]

Machine T ype 8094 1 2 3 4 5 6 8 7 9 10 11 12 13 Item # 8094 FRUs FRU# CRU 1 To p Cover (all models) 89P6782 * 2 PCI riser card and bracket assembly (all models) 89P6790 * 3 200 W power supply-Hipro PFC (models CT O 11 A 11 T 11 U 11 Q 11 B 11 H 1 1V) 89P6805 ** 4 Hard disk drive 40GB 7200rpm EIDE A T A-100 (models CTO 11 A 11 Q 11 T 11 U 11 B 11 H[...]

Item # 8094 FRUs FRU# CRU 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y8762 * 4 Hard disk drive 160GB 7200rpm Serial ATA (models CTO) 40Y9035 * 5 Front Rotating Cage assembly (all models) 39M0612 ** 6 CD-ROM (24x) Plus Ultrabay Enhanced Drive (models CTO 11 A 11 Q 11 T 11 U 11 B 11 H 1 1V) 26K5427 * 6 CD-ROM (24x) Plus Ultrabay Enhanc[...]

Item # 8094 FRUs FRU# CRU 10 Micropr ocessor - 2.8GHz Northwood P4 (models CTO) 19R1522 ** 10 Micropr ocessor - 3.0GHz Northwood P4 (models CTO) 19R1524 ** 10 Micropr ocessor - 3.2GHz Northwood P4 (models CTO) 19R1526 ** 10 Micropr ocessor - 2.8GHZ Prescott P4 (models CTO 11 A 11 Q 11 T 11 U 11 B 11 H 1 1V) 19R1528 ** 10 Micropr ocessor - 2.8GHZ Pr[...]

8094 FRUs FRU# CRU Mouse, Scrollpoint Optical (models CT O) 24P0499 * Mouse, optical wheelmouse (models CTO 11 A 11 Q 11 T 11 U 11 B 11 H 1 1V) 89P5089 * PCI Modem Card (Soft), AT X V .90 (models CTO) 22P7943 * IEEE 1394 Adapter -Firewir e (models CTO) 73P2609 * Speakers, Infinity Active T1 (Black) (models CTO) 25P4726 * Speaker Power brick - US, C[...]

8094 Keyboards (Standard PS/2 Black) FRU# CRU Norwegian (models CTO-G) 89P8323 * Polish (models CTO-G) 89P8324 * Portuguese (models CTO-G) 89P8325 * Romanian (models CTO-G) 89P8326 * Russian/Cy (models CTO-G) 89P8327 * Russian/Cy (models CTO-G) 89P8328 * Serbian/Cyrillic (models CTO-G) 89P8329 * Slovak (models CTO-G) 89P8330 * Spanish (models CTO-G[...]

8094 Power Cords FRU# CRU Power Cord (models CT O 11 A 11 T 11 U 1 1V) 6952301 * Power Cord (EMEA, ANZ, ASEAN Eng, Kor ea) (models CTO-G) 13F9978 * Power Cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models CT O-G 1 1H) 14F0032 * Power Cord (EMEA) (models CT O-G) 13F9996 * Power Cord (EMEA, LA) (models CT O-G) 14F0068 * Power Cord (China, HK) (models 11 B 1[...]

148 Hardwar e Maintenance Manual[...]

Chapter 10. Additional Service Information This chapter provides additional information that the service r epresentative might find helpful. Security features Security features in this section include the following: v Passwords v V ital Product Data v Management Information Format (MIF) v Alert on LAN ™ Hardware controlled Passwords Hardwar e con[...]

1. Click Start from the desktop, then Programs . 2. Select SystemV iew Agent 3. Select the Serial Number Information icon 4. Click the plus sign to expand. 5. Select the component you want to view or edit. 6. Double click on the component you want to change. 7. Enter new data in the V alue field, then click Apply . BIOS levels An incorrect level of[...]

5. On the Flash BIOS Update page, scroll down to locate the .txt file for the flash from the operating system version. Click the .txt file. 6. Print these instructions. This is very important because these instructions ar e not on the screen after the download begins. 7. From the br owser , click Back to return to the list of files. Car efully foll[...]

Power management Power management reduces the power consumption of certain components of the computer such as the system power supply , processor , hard disk drives, and some monitors. Automatic configuration and power interface (ACPI) BIOS Being an ACPI BIOS system, the operating system is allowed to control the power management features of the co[...]

Recovering software using the Rescue and Recovery program The Rescue and Recovery program pr ovides an environment that runs independently of the W indows operating system and is hidden from the W indows operating system. Because the Rescue and Recovery workspace is hidden, it is immune from most vir us attacks and provides a safe place to perform [...]

154 Hardwar e Maintenance Manual[...]

Appendix. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area. Any refer ence to a Lenovo product, program, or service is not intended to state or imply that only that Le[...]

vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation. Actual r esults may vary . Users of this document should verify the applicable data [...]

[...]

Part Number: 19R2387 Printed in USA (1P) P/N: 19R2387[...]