Lenoxx Electronics CD-103 manual

® COMP ACT DISC PLA YER PLA YS MUSIC COMP ACT DISCS FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T RECEIVES TV BAND AND WEA THER BAND RECEIVES AM/FM BROADCASTS RECORDS FROM CD, RADIO, OR BUIL T -IN MICROPHONE FM STEREO AND POWER LED INDICA TORS 2 W A Y POWER - AC/DC REQUIRES 6 SIZE C BA TTERIES (not included) IB-CD103(SY)-WM-E-053002   ?[...]

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all in[...]

2 ADDITIONAL SAFETY INSTRUCTIONS 1 . Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2 . Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3 . Object and Liquid Entry - Care should be taken so that objects d[...]

1 . Use only the type and size of batteries mentioned in the operating instructions manual (batteries are not included with this set, please buy the proper batteries). 2 . Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3 . Do not open or mutilate the batteries. Rel[...]

CHOOSING THE POWER SOURCES Y ou can use the AC power or batteries as a power source. 4 T o a wall outlet NOTE: One blade of plug and outlet is wider . AC SOCKET Battery compartment IB-CD103(SY)-WM-E-090402 1 . Connecting the AC power cord Insert one end of the supplied AC power cord into the socket located at the rear of the player , and the other [...]

1 Slide the FUNCTION switch to CD position (power on), the POWER lamp will be on. And the display will show 2 dashes   flashing , then   . 3 Close the CD DOOR by pushing it down. The display will show the total tracks on that CD. 4 1 2 & 3 Lift the right corner of the CD DOOR to open it and place the CD in the CD compartment. The la[...]

USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback The PLA Y lamp will flash during pause. Press again to resume play after pause. Go to the next track Go back to the previous track Locate a point in a song BACKWARD or FORWARD Press and hold down while playing until you fin[...]

LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (see page 4). Slide the FUNCTION switch to RADIO position, the POWER lamp will be on. 1 2 3 1 2 3 Slide the BAND switch to the proper band position (AM, FM, or TV1, TV2 (WEA THER BAND)) that you want. Select AM to tune AM radio stations. Select FM to tune FM radio stations. Sele[...]

USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Slide or Adjust Adjust the volume VOLUME control TIP • Next time you want to listen to the radio, just slide the FUNCTION switch to RADIO.The player automatically starts playing the pre- viously tuned station. Turn off the Radio Slide the FUNCTION switch to T APE position T o improve broadcast recep[...]

PLA YING A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a recorded tape. Close the door . 3 2 2 3 Press the PLA Y button. The player turns on and starts playing. PLA Y Slide the FUNCTION switch to T APE position. 1 4 When the set finishes playing this side of[...]

USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume VOLUME control Fast forward or rewind the tape F AST FOR WARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause. STOP/EJECT button STOP/EJECT button VOLUME CONTROL P AUSE STOP/EJECT F AST F .&a[...]

RECORDING ON A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM, TV1, TV2, CD, or , built-in microphone) you want to record. 1 3 1 2 STOP/EJECT T o record from the CD player , insert a CD and follow the steps to pla[...]

USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the power Press the STOP/EJECT button and slide the FUNCTION switch to T APE position. TIP Press or Adjust Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording. Pause recording • For best recording effect, use the AC power instead of batteries. • T o e[...]

PLA YING CD TRACKS REPEA TEDL Y (REPEA T PLA Y) 1. Slide the FUNCTION switch to CD position. 2. Select the track by pressing or , and then press . 3. Press the CD REPEA T button. T o repeat Press a single track (song) Press the REPEA T button once, the REPEA T lamp will flash. Y ou can play CD tracks over and over in normal or program play modes (s[...]

Programmed Play PROGRAM 14 PLA YING CD TRACKS IN PROGRAMMED ORDER T o change the current program Just create a new program following the Programming procedure. Y ou can make a program of up to 16 tracks in the order you want them to be played. PROGRAM REPEA T IB-CD103(SY)-WM-E-053002 1 . Slide the FUNCTION switch to CD position. Make sure the CD is[...]

PRECAUTIONS On Safety  As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only .  Should any solid object or liquid fall into the player , unplug the player, and have it checked by qualified personnel before operating it any further . On[...]

PRECAUTIONS (continued) Notes on CDs  Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out.  Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.  Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it [...]

MAINTENANCE Cleaning the Lens If the lens becomes dirty , it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower . Cleaning the T ape Heads Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operati[...]

TROUBLE SHOOTING Problem Remedy The power is not on.  Connect the AC power cord to a wall outlet securely .  Make sure the batteries are inserted correctly and they are fresh. There is no sound.  Make sure the FUNCTION switch is in the correct position.  Adjust the volume.  Unplug the headphones when listening through speakers. CD do[...]

SPECIFICA TION General Description Power source: AC 120V , 60Hz 12 W atts DC 9V (6 size C batteries) (Alkaline batteries are recommended) Speakers: 2 - 3 1 / 2  8 ohm Output power: 1.5W/channel Dimensions: Width: 14 1 / 2  Depth: 8  Height: 6 3 / 4  Weight: 5LBs (without batteries) CD Section Plays disc type: Any normal CD used in[...]