LG Electronics L1953H manual

M ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. S ee the label attached on the product and give the information to your dealer when you ask for service. L1753H L1953H L1753HM L1953HM L1753HR L1953HR User ’ s Guide[...]

A1 This unit has been engineered and manufactur ed to ensure your personal safety , however improper use may r esult in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display , observe the following basic rules for its installation, use, and servicing. On Safety Use only the [...]

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventil[...]

Connecting the speakers - The feature is only for speaker models - L1753HM, L1953HM A3 Connecting the speaker 1 . Place the monitor with its front facing downward on a soft cloth. 2 . Insert the protruding hook of the speaker in the direction of the slot in the back of the product. DC-OUT D-SUB DVI-D AC-IN DC-OUT D-SUB DVI-D AC-IN Hook Slot Audio D[...]

A4 Connecting the Display Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. Do not put your hand on the slide to avoid injury. Before setting up t[...]

Connecting the Display A5 1. Put a cushion or soft cloth on a flat surface. T o remove the Stand: 2. Place the monitor face down on the cushion or soft cloth. 3. Hold the product as it follows and lift up the Stand slightly. 4. Change your hold on the product as it follows and turn the Stand Base in the arrow direction until you hear a "click.[...]

A6 Connecting the Display T o remove the Stand Base: 1. Hold the body of the Stand as it follows. 3 . Pushing Latch inside, Take the stand base from stand body. 4. The body of the Stand and the Stand Base are successfully separated. 2. Press the two latches at the same time as it follows.[...]

A7 A7 Connecting the Display 20 Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5˚~20˚ Swivel : 358˚ (The feature is not available for all countries) Er[...]

A8 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display L1753HM / L1953HM Height Range : maximum 2.36 inch (60 mm) 60 mm When you use speakers, be sure to set up the stop cover first as shown. Then you use height function, [...]

A9 2 1 Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 3. Connect the power cord into a proper power outlet that is easily accessible and close to the display. Wall-outlet type PC[...]

A10 Using the speakers - The feature is only for speaker models - L1753HM, L1953HM Side Jack Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. Rear AUDIO IN Audio Input Connects to the *LINE OUT jack of the PC sound card. *Line Out Speaker Out <Jack of the PC sound card>[...]

A11 Control Panel Functions MENU Button Use this button to enter or exit the On Screen Display. Control Function OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You ca[...]

A12 Control Panel Functions This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a selection in the On Screen Display. AUTO/SET Button AUTO[...]

A13 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Contr ol system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adj[...]

A14 NOTE The order of icons may differ depending on the model (A14~A18). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display contr ol, adjustment, and setting menus. To adjust the brightness, contrast and gamma of the screen PICTURE COLOR POSITION TRACKING SETUP Main menu Sub-menu A D Reference PR[...]

A15 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Y ou wer e introduced to the procedur e of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU B[...]

A16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. PICTURE PICTURE PR[...]

A17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of cha[...]

A18 On Screen Display(OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description To adjust the USER sub-menu function, Press the SET Button MOVIE TEXT NORMAL BRIGHTNESS ACE 1 2 RCM SAVE USER USER When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, [...]

A19 T roubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator blue or green? ● Is the power indicator amber? ● Do you[...]

A20 T roubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, vertical bars or stripes are visible. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. ● The screen color is mono or abnormal. ● The screen blinks. • Press the AUTO/SET button to automaticall[...]

A21 T roubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driv[...]

A22 A22 Specifications L1753H / L1753HR Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord NOTE Information in this document is subject to change without notice. 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating [...]

A23 A23 Specifications L1753HM Display Sync Input Video Input Resolution Plug&Play Power Consumption (Without Speaker) Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord NOTE Information in this document is subject to change without notice. 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare[...]

A24 A24 Specifications L1953H / L1953HR NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating[...]

A25 A25 Specifications L1953HM Display Sync Input Video Input Resolution Plug&Play Power Consumption (Without Speaker) Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord NOTE Information in this document is subject to change without notice. 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glar[...]

A26 Specifications Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 **13 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976[...]

A27 Specifications Signal Connector Pin Assignment 1 8 9 17 24 16 Pin Signal(DVI-D) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T. M. D. S. Data2- T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4- T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync. T. M. D. S. Data1- T. M. D. S. Data1+ T. M. D. S. Data1/3 Shield T. M. D. S. Data3- T.[...]

A28 A28 Installing the W all mount plate This monitor satisfies the specifications of the W all mount plate or the interchange device. 1 . Place the monitor with its front facing downward on a soft cloth. 2 . Separate the stand after firstly separating 6 screws by using a driver as figure. Wall mount plate(Separate purchase) This is stand-type or w[...]

Digitally yours[...]