LG IPS226V-PN manual

www .lg.com O WNER’S MANU AL L CD MONIT OR L CD MONIT OR MODEL IPS226V IPS236V P l ea s e re a d th i s ma n u a l ca r e fu l l y b e for e op e r a t i n g yo u r se t a n d re tain it f or futur e ref erenc e. ENGLISH[...]

1 This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the powe[...]

2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventila[...]

Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. [...]

4 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor . If any items are missing, contact your dealer . DVI-D Signal Cable (This feature is not available in all countries.) NOTE This accessories may look different from those shown here. User must use shielded signal interface cabl[...]

Connecting the Display 5 Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting and Disassembling the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Use a coin on the back of the stand base and turn the screw clockwise to tighten. [...]

6 Connecting the Display Before setting up the monitor , ensure that the power to the monitor , the computer system, and other attached devices is turned off. Positioning your display After installation, adjust the angle as shown below . * With stand base Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚ t o 15[...]

7 Connecting the Display A B Connect DVI-D(Digital signal) Cable Connect D-sub(Analog signal) Cable Connect HDMI Cable 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then tighten the screw of the signal cabl[...]

8 Connecting the Display NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO’ Function? When you encounter problems such as blurry scree[...]

9 Control Panel Functions Front Panel Controls SMART+ Button Use this button to enter ORIGINAL RATIO, DUAL WEB,CINEMA MODE menus. For more information, refer to page 19~20. MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for s[...]

10 Control Panel Functions AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is IPS226V[...]

11 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjus[...]

12 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL PICTURE Standard image settings. : D-SUB(Analog signal) input : DVI-D(Digital signal) input : HDMI input Main menu Sub-menu Supported signals Description COLOR C[...]

On Screen Display(OSD) Selection and Adjustment 13 NOTE The order of icons may differ depending on the model (12~22). USER MOVIE TEXT PHOTO sRGB MODE It is a mode that the screen is adjusted to the best to view the videos. It is a mode that the screen is adjusted to the standard sRGB. It is a mode that the screen is adjusted to the best for the tex[...]

14 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Exit : Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL To adjust the brightness of the screen. To adjust the contrast of the screen. To adjust the clearness of the screen. You can set the offs[...]

16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description COLOR TEMP PRESET Select either PRESET or USER to adjust the screen color. Select the preset color temperature. WARM: Yellow screen color. MEDIUM: Red screen color. COOL: Blue screen color. USER GAMMA COLOR RESET SIX COLOR Sets and stores the hue and saturation for si[...]

17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE OVERSCAN To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of chara[...]

18 On Screen Display(OSD) Selection and Adjustment Press the , buttons to reset immediately. Main menu Sub menu Description To choose the language in which the control names are displayed. LANGUAGE WHITE BALANCE If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. [...]

19 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

20 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Switch to full screen mode according to input image signal. *This function works only if input resolution is lower than monitor ratio (16:9). Make the eye comfortable by reducing the background brightness in the web page. * Before using below functions, please install[...]

21 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

22 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Exit : Exit , : Move : Select another sub-menu MOVIE It is a mode that the screen is adjusted to the best to view the videos. TEXT PHOTO USER sRGB It is a mode that the screen is adjusted to the best for the text works. It is a mode that the screen is adjusted to the [...]

23 T roubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power indicator flickering? ● Do you see an "OUT OF RANGE" message on the screen?[...]

24 T roubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, vertical bars or stripes are visible. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are u[...]

25 The Audio function is not working T roubleshooting Display image is incorrect ● The screen color is mono or abnormal. ● The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bi[...]

26 Specifications IPS226V 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm 0.248 x 0.248 mm (Pixel pitch) Display Sync Input Video Input Max VESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 Hz Resolution Plug&Play On Mode : 35 W(Typ.) Sleep Mode ≤ 0.5 W Off Mode ≤ 0.5 W Power Cons[...]

27 Specifications IPS236V 58.4 cm (23.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 58.4 cm 0.265 x 0.265 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. Analog, Digital : 5 6 Hz t o 7 5 H z (Automatic) HDMI : 56 Hz to 61 Hz (Automatic) Input Form Separate Sync. Digital Syn[...]

28 Specifications Preset Modes (Resolution) Indicator On Mode Sleep Mode Off Mode Blue Blue Blinking Off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) * Recommend Mode DSUB/DVI Timing Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 480P 576P 720P 720P 1080i 1080i 1080P 108[...]

Installing the W all mount plate 29 This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor face down on the soft cloth. 2. When you desire to disintegrate the monitor from the stand base, use a coin to turn the screw counterclockwise. 3. Pull out the Stand Base to remove. 4. Remove the Stan[...]

30 Installing the W all mount plate 5 . Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. Kensington Security Slot Connected to a locking cable[...]

As an ENERG Y ST AR Partner LG E U. S. A.,Inc . has dete rm ine d th at thi s pro duc t me ets the ENER GY S T AR gu ideline s f or en ergy e fficiency . E N E R G Y S T A R i s a s e t o f p o w e r - s a v i n g gu i de l in es iss ue d b y t h e U.S. E nv i ron m en t al Pro tection Agency(EP A).[...]