Linksys RT31P2-NA manual

A Division of Cisco Systems, Inc . ® Model No . WIRED with 2 Phone Ports Br oadband Router RT 3 1 P 2 - N A User Guide[...]

Broadband Router with 2 Phone P orts Copyright and T rademarks Specifications are subject to change without notice . Linksys is a registered tradema rk or trademark of Cisco Systems, Inc . and/or its affiliates in the U.S . and certain other countries. Copyright © 2004 Cisco Systems, Inc. All rights reserved. Other brands and product names are tra[...]

Broadband Router with 2 Phone P orts T ab l e o f C o nt ent s Chapter 1: Introduction 1 Welcome 1 What’s in this Guide? 2 Chapter 2: Networking Basics 4 An Introduction to Local Area Networks 4 The Use of IP Addresses 4 Chapter 3: Getting to Know the Router 6 The Back Panel 6 The Front Panel 7 Chapter 4: Connecting the Router 8 Overview 8 Connec[...]

Broadband Router with 2 Phone P orts The Status Tab - Voice 44 The Status Tab - Router 45 The Status Tab - Local Network 46 Appendix A: Troubleshooting 47 Common Problems and Solutions 47 Frequently Asked Questions 58 Appendix B: Upgrading Firmware 62 Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter 63 Windows 98 or Me I[...]

Broadband Router with 2 Phone P orts List of F ig u re s Figure 3-1: Back Panel 6 Figure 3-2: Front Panel 7 Figure 4-1: Router Connection Diagram 8 Figure 4-2: Connect a PC 9 Figure 4-3: Connect a Telephone 9 Figure 4-4: Connect the Cable/DSL Modem 9 Figure 4-5: Connect the Power 9 Figure 5-1: Router’s IP Address 12 Figure 5-2: Router Login 12 Fi[...]

Broadband Router with 2 Phone P orts Figure 5-22: Applications & Gaming Tab - UPnP Forwarding 34 Figure 5-23: Applications & Gaming Tab - DMZ 36 Figure 5-24: Applications & Gaming Tab - QoS 37 Figure 5-25: Administration Tab - Management 39 Figure 5-26: Backup & Restore Configuration 40 Figure 5-27: Administration Tab - Log 41 Figur[...]

1 Chapter 1: Introductio n Welcome Broadband Router with 2 Phone P orts C h a p te r 1 : I n tr o d u c ti o n We lc o me Thank you for choosing the Broadband Router with 2 Phone Ports. This Router will allow your computers to share a high-speed Internet connection as well as resources, including files and printers. And after you have set up your I[...]

2 Chapter 1: Introductio n What’s in this Guide? Broadband Router with 2 Phone P orts What’ s in this Guide? This user guide covers the basic steps for setting up a network with a router . After going throu gh “Chapter 3: Getting to Know the Router , ” most users will only need to use the following chapters: • Chapter 4: Connecting the Ro[...]

3 Chapter 1: Introductio n What’s in this Guide? Broadband Router with 2 Phone P orts • Appendix F: Specifications This appendix provides the technical specifications for the Router . • Appendix G: Warr anty Information This appendix supplies the warranty information for the Router . • Appendix H: Regulator y Information This appendix suppl[...]

4 Chapter 2: Networking Basics An Introduction to Local Area Networks Broadband Router with 2 Phone P orts C h a p te r 2: N e two r k i n g B a s i c s An Introduction to Local Ar ea Networks Simply put, a router is a network device that connects two networks together . The Router connects your local area network (LAN), or the group of PCs in your[...]

5 Chapter 2: Networking Basics The Use of IP Addresses Broadband Router with 2 Phone P orts A DHCP server can either be a designated PC on the network or another network device , such as the Router . By default, the Router’s Internet Connection T ype is Obt ain an IP automa tically (DHCP). The PC or network device obtaining an IP address is calle[...]

6 Chapter 3: Getting to Know th e Router The Back Panel Broadband Router with 2 Phone P orts C h a p te r 3 : G e tti n g to K n o w th e R o u te r The Back P anel The Router’s ports and the Reset button are located on the back panel of the Router . Internet This Internet port connects to your cable or DSL modem. Phone1 For your primar y telepho[...]

7 Chapter 3: Getting to Know th e Router The Front Panel Broadband Router with 2 Phone P orts The Front P anel The Router’ s LEDs, which inform you about network activities, are located on the front panel. Po w e r Green. The P ower LED lights up when the Router is powered on. If the LED is fla shing , the Router is booting up, running a system s[...]

8 Chapter 4: Connecting th e Router Overview Broadband Router with 2 Phone P orts Ch a p t e r 4 : Co n n e c t i n g t h e R o u t e r Overview T o begin installation of the Router , you will connect the Router to your PCs, telephone(s) or fax machine(s), and cable or DSL modem. The following connection diagram illustrates a basic network setup wi[...]

9 Chapter 4: Connecting th e Router Connection Instructions Broadband Router with 2 Phone P orts Connection Instructions 1. Before you begin, make sure that all of your hardware is powered off , including the Router , PCs, switches, and cable or DSL modem. 2. Connect one end of an Ethernet network cable to one of th e numbered ports on the back of [...]

10 Chapter 5: Configuring the Router Overview Broadband Router with 2 Phone P orts Ch a p t e r 5 : Co n f i g u r i n g t h e R o u t e r Overview Linksys recommends using the Setup CD-ROM for first-time installation of the Router . If you do not wish to run the Setup Wizard on the Setup CD-ROM, then you can use the Web-based Utility to configure [...]

11 Chapter 5: Configuring the Router Overview Broadband Router with 2 Phone P orts Vo ic e • System. Enter the STUN (Simple T raversal of UDP through NA T) settings, if required by your Internet phone service provider . • Line1. Enter your ser vice account information, and configure the various settings for this phone line . • Line2. If you h[...]

12 Chapter 5: Configuring the Router How to Access the Web-based Utility Broadband Router with 2 Phone P orts How to Access the W eb-based Utility T o access the Web-based Utility of the Router , lau nch Internet Explorer or Netscape Navigator , and enter the Router’ s default IP address, 192.168.15.1 , in the Addr ess field. Press the Enter key [...]

13 Chapter 5: Configuring the Router The Setup Tab - Basic Setu p Broadband Router with 2 Phone P orts Static IP If you are required to use a permanent IP address, then select Static IP . IP Addr ess . This is the IP address that the Router has, when seen from the Internet. Y our ISP will pro vide you with the IP Address you need to specify here . [...]

14 Chapter 5: Configuring the Router The Setup Tab - Basic Setu p Broadband Router with 2 Phone P orts RAS (for SingT el) Remote Access Service (RAS) is a ser vice that applies to connections in Singapore only . For users in Singapore , check with Singtel for information on RAS. User Name and P assword . Enter the User Name and Password supplied by[...]

15 Chapter 5: Configuring the Router The Setup Tab - Basic Setu p Broadband Router with 2 Phone P orts connection as soon as you attempt to access the Inter net again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain on at all times, enter 0 in the Max Idle Time field. Otherwise , ent[...]

16 Chapter 5: Configuring the Router The Setup Tab - Basic Setu p Broadband Router with 2 Phone P orts Optional Settings Some of these settings may be required by your ISP . Verify with your ISP before making any changes. Host Name and Domain Name . These fields allow you to supply a host a nd domain name for the Router . Some ISPs require these na[...]

17 Chapter 5: Configuring the Router The Setup Tab - Basic Setu p Broadband Router with 2 Phone P orts Number of Address (Optional). Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than 253. The default is 50 . DHCP Address Range . The range of DHCP addresses is displayed here .[...]

18 Chapter 5: Configuring the Router The Setup Tab - DDNS Broadband Router with 2 Phone P orts The Setup T ab - DDNS The Router offers a Dynamic Domain Name System (DDNS) feature . DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server , or other server behi[...]

19 Chapter 5: Configuring the Router The Setup Tab - MAC Ad dress Clone Broadband Router with 2 Phone P orts The Setup T ab - MAC Addr ess Clone A MAC address is a 12-digit code assigned to a unique piece of hardware for identification, like a social security number . Some ISPs will require you to register a MAC address in order to access the Inter[...]

20 Chapter 5: Configuring the Router The Setup Tab - Advan ced Routing Broadband Router with 2 Phone P orts The Setup T ab - Advanced Routing The Advanced Routing screen allows you to configure the Netw ork Address T ranslation (NA T), dynamic routing, and static routing settings. Advanced Routing NA T . NA T is a security feature that is enabled b[...]

21 Chapter 5: Configuring the Router The Setup Tab - Advan ced Routing Broadband Router with 2 Phone P orts Interface . Se lect Local or Internet , depending on the location of the static route’s final destination. Delete Entry . If you need to delete a route , select its n umber from the drop-down menu, and click the Delete Entry button. Show Ro[...]

22 Chapter 5: Configuring the Router The Security Tab - Filter Broadband Router with 2 Phone P orts The Security T ab - Filter When you click the Security tab , you will see the Filter screen. Filters block specific internal users from accessing the Internet and block anonymous Internet requests and/or multicasting. Filter IP Address Range Y ou can[...]

23 Chapter 5: Configuring the Router The Security Tab - Filter Broadband Router with 2 Phone P orts Filter Multicast . Multicasting allows for multiple transmissions to specific recipients at the same time . If multicasting is permitted, then th e Router will allow IP multicast packets to be forw arded to the app ropriate computers. Select Enabled [...]

24 Chapter 5: Configuring the Router The Security Tab - VPN Passthrough Broadband Router with 2 Phone P orts The Security T ab - VPN P assthrough The VPN Passthrough screen allows you to allow VPN tunnels using IPSec, PPPoE, or PPTP protocols to pass through the Router . VPN Passthrough IPSec P assthrough . IPSec (Internet Protocol Security) is a s[...]

25 Chapter 5: Configuring the Router The Voice Tab - System Broadband Router with 2 Phone P orts The Vo ice T ab - System STUN (Simple T raversal of UDP through NA Ts) is a protocol that enables Inter net phone calls to travel between your local network and the Internet. Not all Inter net p hone service providers use the STUN protoco l; however , i[...]

26 Chapter 5: Configuring the Router The Voice Tab - Line1 Settings Broadband Router with 2 Phone P orts The V oice T ab - Line1 Settings On the Line1 screen, configure the settings for service on Line 1, which uses the Phone1 port of the Router . Subscriber Information Display Name . Enter the name you wish displayed for caller ID purposes. (This [...]

27 Chapter 5: Configuring the Router The Voice Tab - Line1 Settings Broadband Router with 2 Phone P orts Call Forward Settings Cfwd All Dest . If you want to forward all calls to a specific telephone n umber , then complete this field. Enter the number that will receive all phone calls. Cfwd Busy Dest. If your phone is busy , then you can forward i[...]

28 Chapter 5: Configuring the Router The Voice Tab - Line1 Settings Broadband Router with 2 Phone P orts Voice Quality Settings Voice Quality . Select the quality level you want to use for your voice calls, Best (G .711u Requires 64k Bandwidt h) , Good (G .711a Requires 64k Bandwidth) , Good (G.726-40 Requir es 40k Bandwidth) , Good (G.726-32 Requi[...]

29 Chapter 5: Configuring the Router The Voice Tab - Line2 Settings Broadband Router with 2 Phone P orts The V oice T ab - Line2 Settings On the Line2 screen, configure the settings for service on Line 2, which uses the Phone2 port of the Router . Subscriber Information Display Name . Enter the name you wish displayed for caller ID purposes. (This [...]

30 Chapter 5: Configuring the Router The Voice Tab - Line2 Settings Broadband Router with 2 Phone P orts Call Forward Settings Cfwd All Dest . If you want to forward all calls to a specific telephone n umber , then complete this field. Enter the number that will receive all phone calls. Cfwd Busy Dest . If your phone is busy , then you can forward [...]

31 Chapter 5: Configuring the Router The Voice Tab - Line2 Settings Broadband Router with 2 Phone P orts Voice Quality Settings Voice Quality . Select the quality level you want to use for your voice calls, Best (G .711u Requires 64k Bandwidt h) , Good (G .711a Requires 64k Bandwidth) , Good (G.726-40 Requir es 40k Bandwidth) , Good (G.726-32 Requi[...]

32 Chapter 5: Configuring the Router The Applications & Gaming Ta b - Port Range Forwarding Broadband Router with 2 Phone P orts The Applications & Gaming T ab - P ort Range Forwar ding When you click the Applications & Gaming tab , you will see the Port Range Forwarding screen. Port Range Forwarding sets up public services on your netw[...]

33 Chapter 5: Configuring the Router The Applications & Gamin g Tab - Port Triggering Broadband Router with 2 Phone P orts The Applications & Gaming T ab - P ort T riggering The Port T riggering screen allows the Router to watch outgoing data for specific port numbers. The IP add ress of the computer that sends the matching data is rememb e[...]

34 Chapter 5: Configuring the Router The Applications & Gamin g Tab - UPnP Forwarding Broadband Router with 2 Phone P orts The Applications & Gaming T ab - UPnP Forwarding The UPnP Forwarding screen displays preset application settings as well as options to customize port ser vices for other applications. UPnP Forwarding Application . T en [...]

35 Chapter 5: Configuring the Router The Applications & Gamin g Tab - UPnP Forwarding Broadband Router with 2 Phone P orts NNTP (Network News T ransfer Protocol). The protocol used to connect to Usenet groups on the Inter net. Usenet newsreaders support the NNTP protocol. SNMP (Simple Network Management Protocol). A widely used network monitori[...]

36 Chapter 5: Configuring the Router The Applications & Gamin g Tab - DMZ Broadband Router with 2 Phone P orts The Applications & Gaming T ab - DMZ The DMZ screen allows one local user to be exposed to the Internet for use of a special-pu rpose ser vice such as Internet gaming and videoco nferencing . DMZ hosting forwards all the ports at t[...]

37 Chapter 5: Configuring the Router The Applications & Gamin g Tab - DMZ Broadband Router with 2 Phone P orts The Applications & Gaming T ab - QoS Quality of Service ( QoS) ensures better service to high-priority types of n etwork traffic, which may involve demanding, real-time applications, such as Internet phone calls or videoconferencin[...]

38 Chapter 5: Configuring the Router The Applications & Gamin g Tab - DMZ Broadband Router with 2 Phone P orts Enable/Disable . T o use port-based QoS, select Ena ble . Otherwise , keep the default, Disable . For each port, specify the Priority , Flow Control setting, and Ingress Rate Limit. Priority . Select the port’s priority level, High o[...]

39 Chapter 5: Configuring the Router The Administration T ab - Management Broadband Router with 2 Phone P orts The Administration T ab - Management When you click the Administration tab , you will see the Management screen. This screen al lows you to change the Router’ s access settings as well as configure the UPnP (Universal Plug and Play) feat[...]

40 Chapter 5: Configuring the Router The Administration T ab - Management Broadband Router with 2 Phone P orts Allow users to disable Internet access . When enabled, this feature allows you to prohibit any and all Internet connections. Backup and Restore Backup and Restore . Click this button to back up or restore your configuration. Click the Back[...]

41 Chapter 5: Configuring the Router The Administration T ab - Log Broadband Router with 2 Phone P orts The Administration T ab - Log When you click the Administration tab , you will see the Log screen. It provides you with a log of all incoming and outgoing URLs or IP addresses for your Inter net conn ection. Log Log . T o a ccess activity logs, s[...]

42 Chapter 5: Configuring the Router The Administration T ab - Factory Defaults Broadband Router with 2 Phone P orts The Administration T ab - Factory Defaults The Factory Defaults screen allows you to restore the Router ’ s configuration to its factor y default settings. Factory Defaults Restore Factory Defaults . T o clear all of the Router’s[...]

43 Chapter 5: Configuring the Router The Administration T ab - Firmware Upgrade Broadband Router with 2 Phone P orts The Administration T ab - Firmware Upgrade The Firmware Upgrade screen allows you to upgrade the Router’ s firmw are . Do not upgrade the fir mware unless you are experiencing problems with the Router or the new firmware has a feat[...]

44 Chapter 5: Configuring the Router The Status Tab - Vo ice Broadband Router with 2 Phone P orts The Status T ab - Voice When you click the Status tab , you will see the Voice screen, which displays information about your Inter net phone line(s). Information Voice V ersion . This shows the version number of the voice firm war e currently installed[...]

45 Chapter 5: Configuring the Router The Status Tab - Rou ter Broadband Router with 2 Phone P orts The Status T ab - Router The Router screen displays information about the Router and its current settings. The on-screen information will vary depending on the Internet Connection T ype selected on the Setup screen. Information Firmware Version . This[...]

46 Chapter 5: Configuring the Router The Status Tab - Loca l Network Broadband Router with 2 Phone P orts The Status T ab - Local Network The Local Network screen displays information about the local network. Local Network MAC Address . The MAC Address of the Router’ s LAN (local area network) interface is displayed here . IP Address . The Router[...]

47 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts App e nd ix A: T roub le shoot in g This appendix provides solutions to problems that may occur during the installation and operation of the Router . Read the description below to solve your problems. If you can't find an answer here , check the [...]

48 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts B . Press CTRL + F5 . This is a hard refresh, which will force Windows Explorer to load new webpages, not cached ones. C. Click To o l s . Click Internet Options . Click the Security tab . Click the Default level button. Make sure the security level i[...]

49 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts D . Enter a unique IP address that is not used by any other computer on the network connected to the Router . Y ou can only use an IP address in the ranges 192.168.15.2 to 192.168.15.99 and 192.168.15.151 to 192.168.15.254. E. Enter the Subnet Mask, 2[...]

50 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts For Windows 2000: 1. Click Start , Settings , and Control P anel . Doub le-click Network and Dial -Up Connections . 2. Right-click the Local Area Connection that is associated with the Etherne t adapter you are using , and select the Properties option[...]

51 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts D . In the command p rompt, type ping followed b y your Internet IP address and press the Enter key . The Internet IP Address can be found in the we b interface of the Router . F or example, if your Internet IP address is 1.2.3.4, you would enter ping[...]

52 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts 8. I can’t get my Virtual Privat e Netw ork (VPN) to work thr ough the Router . Access the Router’s web interface b y going to http://192 .168.15.1 or the IP address of the Router , and go to the Security => VPN P assthrough tab. Make sure you [...]

53 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts Check “ Appendix C: Finding the MAC Address and IP Address for Y our Ethernet Adapter” for details on getting an IP address. F . Ch eck th e Enabled option for the port ser vices you want to use . Consider the examples below: When you have complet[...]

54 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts F . Ch eck th e Enabled option for the port ser vices you want to use . Consider the examples below: When you have completed the configuration, click the Save Settings button. 11. I can’t get the Internet game, server , or application to work. If yo[...]

55 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts B . Enter a different password in the Router Password field, and enter the same password in the second field to confirm the password. C. Click the Save Settings button. 13. I am a PPPoE user , and I need to remove the proxy settings or the dial-up pop[...]

56 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts 16. The f irmwar e upgrade failed. The upgrade could have failed for a number o f reasons. Follow these steps to upg rade the firmware: A. If the firmware upgrade failed, use the TFTP prog ram (it was do wnloaded along with the firmware). Open the pdf[...]

57 Appendix A: Troubleshoo ting Common Problems and Solutions Broadband Router with 2 Phone P orts B . Enter the password, if asked. (The default password is admin .) C. On the Basic Setup tab, look for the MTU option, and select Enable . In the Size field, enter 1492. D . Click the Save Sett ings button to continue. If your difficulties continue ,[...]

58 Appendix A: Troubleshoo ting Frequently Asked Questions Broadband Router with 2 Phone P orts Frequently Ask ed Questions How do I ma k e a phone call? Pick up your phone and dial 1 + area code + phone number . Y ou must dial 1 and the area code for all calls, even local ones. Can I make calls if my Internet connection is dow n? No. Y our high -s[...]

59 Appendix A: Troubleshoo ting Frequently Asked Questions Broadband Router with 2 Phone P orts Does the Router support IC Q send file? Y es, with the following fix: click ICQ menu => pr eference => connectio ns tab=>, and check I am behind a firewall or proxy . Then set the firewall time-out to 80 seconds in the firew all setting . The In[...]

60 Appendix A: Troubleshoo ting Frequently Asked Questions Broadband Router with 2 Phone P orts How can I be notified of new Router f irmware upgrades? All Linksys firmware upgrades are posted on the Linksys website at www .linksys.com , where they can be downloaded for free . The Ro uter’ s fir mware can be upgraded with TFTP programs. If the Ro[...]

61 Appendix A: Troubleshoo ting Frequently Asked Questions Broadband Router with 2 Phone P orts Does the Router replace a modem? Is there a cable or DSL modem in the Router? No, this version of the Router must work in conjunction with a cable or DSL modem. Which modems are compatible with the Router? The Router is compatible with virtually any cabl[...]

62 Appendix B: Upgradin g Firmware Broadband Router with 2 Phone P orts A ppe ndix B : U pgr adin g F ir m w are Use the Router’s W eb-based Utility to upg rade its firmware; however , if you do so, you will lose the settings you have configured on the Router . Before you upgrade its fir mwar e , write down all of your custom settings. After you [...]

63 Appendix C: Finding th e M AC Address and IP Address for Your Ethernet Adap ter Windows 98 or Me Instructions Broadband Router with 2 Phone P orts A ppe ndix C : Finding t he M AC A ddr e s s and I P A ddr ess f o r Y o ur Et her net A dap t er This section describes how to find the MAC address for your computer’s Ethernet adapter so you can u[...]

64 Appendix C: Finding th e M AC Address and IP Address for Your Ethernet Adap ter For the Router’s Web-based Utility Broadband Router with 2 Phone P orts 3. Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet adapter . This appears as a series of numbers and letters. The MAC address/Physical [...]

65 Appendi x D: Wind ows Help Broadband Router with 2 Phone P orts A ppe ndi x D : W i ndo w s H elp Almost all networking products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier . These features can be accessed through Windows Help and are described in[...]

66 Appendix E: Glossary Broadband Router with 2 Phone P orts A ppe ndix E: G l os s ar y Adapter - A device that adds ne twork functionality to your PC. Backbone - The part of a network that connects most of the systems and networks together , and handles the most data. Bandwidth - The transmission capacity of a given device or network. Bit - A bin[...]

67 Appendix E: Glossary Broadband Router with 2 Phone P orts Default Gateway - A device that forwards Internet traffic from your loca l area network. DHCP ( D ynamic H ost C onfiguration P rotocol) - A networking protocol that allows administrators to assign temporary IP addresses to network computers by “leasing” an IP address to a user for a [...]

68 Appendix E: Glossary Broadband Router with 2 Phone P orts Half Duplex - Data transmission that can occur in two directions over a single line, but only one direction at a time . Ha rdwa re - The physical aspect of co mputers, telecommunications, and other information technology devices. HTTP ( H yper T ext T ransport P rotocol) - The communicati[...]

69 Appendix E: Glossary Broadband Router with 2 Phone P orts NNTP ( N etwork N ews T ransfer P rotocol) - The protocol used to conne ct to Usenet groups on the Internet. P acket - A unit of data sent over a network. Ping ( P acket IN ter net G roper) - An Internet utility used to deter mine wh ether a particular IP address is online . POP3 ( P ost [...]

70 Appendix E: Glossary Broadband Router with 2 Phone P orts Switch - 1. A data switch that connects computing devices to host compu ters, allowing a large number of devices to share a limited number of ports. 2. A device for making, breaking, or c hanging the connections in an electrical circuit. TCP ( T ransmission C ontrol P rotocol) - A network[...]

71 Appendix F: Specifications Broadband Router with 2 Phone P orts Appen dix F : S pe cif icat ions Model RT31P2-NA Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX) Ports One 10/100 RJ-45 Internet Port, Three 10/100 RJ-45 Network Ports, T wo Standar d Phone Ports, One Power Port Button Reset Cabling T ype RJ-45 Ethernet Categor y 5, RJ-11 St[...]

72 Appendix F: Specifications Broadband Router with 2 Phone P orts Unit Weight 12.70 oz. (0.36 kg) Power External, 12V DC, 1A Certifications FCC, cUL, CE Operating T emp. 0ºC to 40ºC (32ºF to 104ºF) Storage T emp. -20ºC to 60ºC (-4ºF to 140ºF) Operating Humidity 10% to 85%, Non-Condensing Storage Humidity 5% to 90%, Non-Condensing[...]

73 Appendix G: Warranty Informatio n Broadband Router with 2 Ph one P orts Ap pe n d ix G : W a rra n t y I n f orm a t i on LIMITED WARRANTY Linksys warrants to Y ou that, for a period of one year (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use . Y our exclusive [...]

74 Appendix H: Regulatory Inf ormation Broadband Router with 2 Phone P orts Appen dix H : R e gulat o r y I nf o rm at ion FCC ST A TEMENT This product has been tested and complies with the specification s for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful [...]

75 Appendix I: Contact Info rmation Broadband Router with 2 Phone P orts A ppendix I: C o nt ac t Inf o r m at i on Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www .linksys.com or ftp.linksys.com Can't find information about a product you want to buy on the we[...]