LOREX Technology SG6352 manual

MODEL: SG6352 2.4 GHz WIRELESS COLOR SECURITY SYSTEM WITH WEATHER RESISTANT* CAMERA Instruction Manual www.lorexcctv.com Copyri ght © 2005 St rategic Vista Inte rnational In c English Version 1.0 Before operating th e system, please read th is manua l thoroughly and re tain it for fu ture reference. This product broadcasts over public airwaves and[...]

Explanation of two Symbols The lightning flash with ar rowhead symbol, within an equilateral triangle, is intend ed to alert the user to the presence of uninsulated "dan gerous voltage“ within the product's enclosure that m ay be of sufficient magnitude to constitute a risk of el ectric shock to persons. The exclamation point within an [...]

SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS All the safety and operating instructions should be read before the system is operated, and reta ined for future reference. 1. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 2. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 3. WATER[...]

TABLE OF CONTENTS PAGE iii INTRODUCTION & FE ATURES……………………………………… SYSTEM INCLUDES………………………………………………….. CONTROLS AND FUNCTIONS Wireless Camera….......… ….......….……………………..……... Wireless Receiver...……........ ................ ......……….…?[...]

INTRODUCTION: Thank you for purchasing the 2.4 GHz Wireless Color Camera & Receiver System. This system turns your TV into a Vi deo Security System, providing instant protection in your home or office. Avoid the ha ssle of running wires. This system is easy to install and operate fo r immediate applications. The system is capable of connecting [...]

SYSTEM INCLUDES: 1 - 2.4 GHz Color Wireless Camera Owner’s Manual Also includes: 2 – 9V DC Adapters 1 – RCA Audio/Video Cable 1 – Coaxial Cable 2 1 - 2.4 GHz Wireless Receiver 1 - Clip-on Stand 1 - Wall Mounting Bracket[...]

CONTROLS & FUNCTIONS 1. Microphone – Built-in condenser microphone provides listen-in audio capability from camera to monitor 2. Lens – B&W CMOS Image Sensor 3. 6 Infrared LED’s – Enhances the picture quality in low light conditions* 4. Channel Selector/Power Button – Selects channels 1-4. Holding this button for 3 seconds turns t[...]

WIRELESS RECEIVER REAR VIEW BOTTOM VIEW 9 10 56 7 8 1. Auto/Manual Button – Used to activate/deactivate auto sequencing 2. Channel Selector Button – Used to manually switch channels from 1-4 3. LED Channel Indicators – Indicator light shows selected channel 4. 2.4 GHz Antenna – High gain dipole antenna receives audio and video signal from t[...]

1. Attach the stand base to the wall or ceiling where you want to install the camera. Locate a wall stud or ceiling, and secure the bracket using the three supplied screws. 2. Secure the camera to the bracket by sliding the camera socket over the stand, and fasten it in place with the supplied screw. 3. Connect the supplied 9V DC adapter to the DC [...]

CONNECTING THE RECEIVER TO A TV INSTALLATION OF RECEIVER STEP 2: Ensure the Power Switch on the Receiver is turned OFF before proceeding with the following steps. NOTE 1. Place the wireless receiver nea r your television (or monitor). 2. Connect one end of the RCA cables to the Audio/Video output jacks at the back of the receiver. Plug the other en[...]

CONNECTING A RECEIVER TO A TV USING COAXIAL CABLES INSTALLATION OF RECEIVER B) Back of Receiver Television Electrical Outlet Coaxial Cable (75 ohm) Ensure the Power Switch on the re ceiver is turned OFF prior to proceeding with the following steps. NOTE 1. Place the wireless receiver nea r your television (or monitor). 2. Connect one end of the coa[...]

SYSTEM OPERATION CONNECTING MORE CAMERAS TO YOUR SYSTEM (MAX. OF 4) When connecting additional cameras to this system, ensure the camera is set to a different channel. Use the Channel Selector button to navigate between channels. AUTO SCANNING - WHEN UTIL IZING MORE THAN 1 CAMERA The video security system provides you with the option to automatical[...]

SYSTEM OPERATION AUTO AND MANUAL VIEWING OPTIONS This system is preset to the Manual mode. In Auto mode, the LED light will turn ON. To manually view a specific camera locati on, set the system to Manual and press the Ch. Select key to view the desi red camera loca tion. Auto Mode is used when more than 1 camera is connected to the system. Set the [...]

FOR MORE INFORMATION, VISIT OUR WEBSITE AT: www.lorexcctv.com TROUBLESHOOTING If the system does not function properly, check the following points before contacting the service center. 10 Causes & Remedies Problems - Adjust ant enna direction Picture rolls and jumps or scrambled picture - Adjust brightness control on TV/monitor - Strong spo t l[...]

TECHNICAL SPECIFICATIONS Because our products are subject to continuous improvem ent, SVII and its subsidiaries reserve the right to modify product design and specifications witho ut notice and without incurring any obli gation. E&OE 11 WIRELESS CAMERA WIRELESS RECEIVER Receiving frequency Output level Sensitivity Antenna Operating temperature [...]

CARE AND MAINTENANCE: Please follow these instructions to ensure proper care and maintenance of this system Keep your monitor and came ra dry. If it gets wet, wipe it dry immediately. Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of the electronic devices. Handle the monitor carefully. Dropping[...]

It’s all on the web www.lorexcctv.com  Product Information  User Manuals  Quick Start Guides  Specification Sheets  Software Upgrades  Firmware Upgrades VISIT Strategic Vista International Inc. www.lorexcctv.com[...]