Magnavox 701P41586 manual

V ersion 1.3 May 2004 Xerox 6030/6050 Wide Format AutoCAD ADI/HDI Driver User Guide 701P41586[...]

2 Xerox Corporation Global Knowledge & Language Services 800 Phillips R oad Bldg. 845-17S Webster , NY 14580 Copyright © 2004 Xerox Corporat ion. All rights reserved. Printed in the United S tates of America. Copyright protection claimed in cludes all forms and matters of copyrighted material and informat ion now allowed by statutory or judici[...]

3 Preface Preface Thank you for using the 6030/6050 W ide Format AutoCAD ADI Driver (hereinafter known as Plotter Driver). This User Guide describes the procedur es an d precautions involved in installing and setting up Plotter Driver . Refer to the us er manuals supplied with the Xerox 6030/6050 W ide Format Copier/Printer for details on relevant [...]

4 Using This Guide Using This Guide  Organization This guide consists of the following chapters. Chapter 1. Installing Pl otter Driver Explains how to install Plotter Driver into your computer .[...]

5 Using This Guide Conventions This User Guide uses the follo wing symbols and conventions: < > key Indicates the keys on the keyboard. Press the <Enter> key. [ ] Indicates the menus and display items on the screens. Select either the [On] or [Off] buttons to display [Job Name], [Owner], and [Reason] in that order. " " Indicat[...]

6 Using This Guide[...]

Table Of Contents Table of Contents Preface Using This Guide T able of Content s Chapter 1 Installing Plotter Driver 1.1 ADI Installation ............. ........... .............. ........... ............ .............. ........... .............. ........... ........... 2 Copy the Driver .............. ............ .............. ........... .......[...]

Table Of Contents[...]

Chapter Chapter 0 1 Inst alling Plotter Driver Chapter 1[...]

2 Chapter 1 Installing Plotter Driver 1.1 ADI Inst allation The following example is based on the assumpti on that AutoCAD is in stall in drive C: and the floppy drive is A:. AutoCAD is installed by the att ached inst aller an d has the st andard directory configuration . Copy the Driver 1 Using W indows Explorer , go to the floppy disk and select [...]

3 1.1 ADI Installation 2 Click the [Printer] tab to bring it to the foreground. 3 Click the [New ...] button to display th e “Add a Printer” dialog box. Then Select “Xerox DW series...”. The “Device Setup” dialog box opens.[...]

4 Chapter 1 Installing Plotter Driver 4 Optional functions unique to the printer model can be set by clicking [Options...] button. These settings can be changed later by selecting [Device and Default Selection] from the “Print/Plot Configuration” dialog box. 5 Setting items Select paper type: Select type of paper to be used from Bond, Film, or [...]

5 1.1 ADI Installation 6 Click the [Options...] button to open the dialog box. Severa l functions are not supported by some plotter models (grayed out options are not supported). Folder Options Program: Select Folder Bypass or Programs 1 through 20. Margin: Select Use program setting or Always of f. Output Bin: Select Don’t care, Fanfo ld output,[...]

6 Chapter 1 Installing Plotter Driver 9 The current print settings are displayed. At the prompt “Do yo u want to change anything?”, enter N for No. Cont rol returns to the “Preferences” dialog box. This completes the driver installation and setup.[...]

7 1.2 HDI Installation 1.2 HDI Installation The following examp le is to configure a local n on-system plotter and network non- system plotter . Copy the Driver 1 Un zip the driver file. This will cr eate subdirectorie s for 2000, 2000i, 2002 and 2004. Installing and Setting up the Driver for Local Plotter 1 Open the AutoDesk Plotter Manager . 2 In[...]

8 Chapter 1 Installing Plotter Driver 8 On the Add Plotter - Plotter Name page, enter a name to identify the currently configured plotter . Choose Next. 9 When you reach the Add Plotter - Finish page, you can choose Finish to exit the Add-a-Plotter wizard. 10 A PC3 file for the newly configured plotter appears in th e Plotters window , and the plot[...]

9 1.2 HDI Installation 7 On the Add Plotter - Plotter Model page, select a manufacturer and model. Choose Next. • (Optional) The Import PCP or PC2 screen enables y ou to use configuration information from a PCP or PC2 file created with an earlier version of AutoCAD. 8 On the Add Plotter - Plotter Name page, enter a name to identify the currently [...]

10 Chapter 1 Installing Plotter Driver 1.3 Driver Operation Reference The driver setup informatio n set in the “Prefe rences” box at driver inst allation can also be changed when the PLOT comma nd is executed. Change Driver Setup 1 Execute the PLOT command to open the “Print/Plot Configu ration” dialog. 2 Click the “Device and Default Sel[...]

11 1.3 Driver Operation Reference Paper size: Select paper size. For this driver , paper size must be selected here, not at “Paper Size and Orientation” in the “Print/Plot Configuration” dialog box. Length: When “Custom size” is selected at “Paper Size”, set its length can be set in integral value in 1mm increments. Set margin: Set [...]

12 Chapter 1 Installing Plotter Driver Margin: Select Use program setting or Always of f. Output Bin: Select Don’t care, Fanfo ld output, or Bin 1 through Bin 13. Manual output: Select Y es or No to use or not to use the function. 7 Click [Image Correction] button to open the dialog box. A correction graph indicates how an output pictur e image i[...]

13 1.3 Driver Operation Reference[...]

14 Index Index I Installing Plot Driver (Window s XP) ................... 2, 7[...]