Makita 6223DE manual

Equipped with Electric Brake MODEL 6223DE MODEL 6223DWE With Fast Charger Capacities No load speed Dimensions iL x W x HI IRPM) Steel Wood Wood screw Machine screw INSTRUCTION MANUAL Net weight SPEC I FI CAT1 0 N S 9 Battery Cartridge 1220 Voltage Model DC1290 Fast Charger Input output Charging time 10 mm 15 mm 5.1 mm x 35 mm 202 mm x 94 mm x 221 m[...]

GENERAL SAFETY RULES (For All Battery Operated Tools) WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not o[...]

Tool Use and Care Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.[...]

Specific Safety Rules 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator. 2. Be aware that this tool is always in an operating condition, because it does [...]

SYMBOLS The followings show the symbols used for tool ................................. volts ............... amperes ................................. herts ................ kilograms ................................. hours ................... minutes ............ seconds ................................. alternating current _._. direct current ..[...]

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRl DG E Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual 25 50 100 150 18 18 18 16 9. Do not operate charger with damaged cord or plug - replace them im- mediately. IO. Do not operate charger if it has received a sharp blow, been dropped, or other- wise damag[...]

ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents. 4. Always cover the battery terminals with the batte[...]

Installing or removing battery cartridge *Always switch off the tool before insertion or removal of the battery cartridge *To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. *To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing an[...]

ASSEMBLY Installing or removing driver bit or drill bit CAUTl ON : Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the bit. Hold the ring and turn the sleeve counter- clockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sl[...]

CAUTION: Always withdraw the tool from the workpiece before resuming operation. If the tool can- not be withdrawn, hold the tool firmly when turning on the tool, to overcome a strong reaction the pointer on the adjusting ring points to a number on the tool body. The fastening torque is minimum when the pointer points to the number 1 and maximum whe[...]

NOTE: *Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged *When driving wood Screws, predrill pilot holes to make driving easier and to pre- vent splitting of the workpiece. See the chart. 4 8 (3116") I 5 1 (13164") I 3 1 - 3 4 (118'' - 9/64',) 3 3 - 3 6 (118'&a[...]

MAINTENANCE CAUTl ON : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Re[...]

ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. Part No, - Bits Drill bits Tested best in Makit[...]

High Capacity charger Model DC1201 Part No. 113126.0 Battery cartridge 1220 Part No. 632804-8 Plastic carrying case Part No. 824510-1 High Capacity charger Model DC1411 Automotive High Capacity Charger Model DC1412 Battery cover Part No. 414938-7 14[...]

Jan -08-'98 US CORDLESS DRIVER DRILL Model 6223D Note: The switch and other part configurations may differ from country to country. 15[...]

MODEL 6223D ITEM $& DESCRIPTION MACHINE ~ 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 6 1 1 1 2 2 1 1 Housing Set [With Item 381 Name Plate Tapping Screw 4x18 Pan Head Scr~w M4x22 Switch Lever Battery Holder Swifch Lever Compression Spri[...]