Mercedes-Benz 2009 S-Class manual

S-Class Operator’s Manual[...]

Symbols Trademarks ® : R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R ESP ® and PRE-SAFE ® are registered trademarks of Daimler. R HomeLink ® is a registered trademark of Prince, a Johnson Controls Company. R LOGIC7 ® is a registered trademark of Harman International Industries, Incorporated. R SIRIUS and related marks are tr[...]

Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and provide years of service. Your Mercedes-Benz represents the efforts of many[...]

2 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . 19 At a glance . . . . . . . . . . . . . . . . . . . . . . 25 Safety and security . . . . . . . . . . . . . . . 43 Control systems . . . . . . . . . . . . . . . . . 81 Controls in detail . . . . . . . . . . . . . . . . 295 Operat[...]

3 1, 2, 3 ... 4-ETS see ETS/4-ETS 4MATIC see All-wheel drive (4MATIC) 911 emergency call . . . . . . . . . . . . . . 158 A ABC (Active Body Control) . . . . . . . . 374 Messages in the multifunction display . . . . . . . . . . . . . . . . . . . . . . 527 ABS (Antilock Brake System) . . . . . . . 69 Indicator lamp . . . . . . . . . . . . . . . . 549[...]

4 Aquaplaning see Hyd roplaning Ashtrays . . . . . . . . . . . . . . . . . . . . . . . 422 Aspect ratio (tires) . . . . . . . . . . . . . . 470 Assistance menu . . . . . . . . . . . . . . . . 250 Audio menu . . . . . . . . . . . . . . . . . . . . 244 Auto-dimming rear view mirrors . . . 321 Automatic central locking . . . . . . . . 301 Automatic he[...]

5 Carpets, cleaning . . . . . . . . . . . . . . . . 489 CD player . . . . . . . . . . . . . . . . . . . . . . 199 Central locking Automatic . . . . . . . . . . . . . . . . . . . 301 Locking/unlocking from inside . . . 301 Central locking/unlocking switch . . 301 Certification label . . . . . . . . . . . . . . . 589 Children in the vehicle Air bags [...]

6 D Dashboard see Instr ument cluster Data recording . . . . . . . . . . . . . . . . . . . 24 Daytime running lamp mode . . . . . . 326 Setting . . . . . . . . . . . . . . . . . . . . . . 252 Deep water see St anding wat er Defogging (windshield) . . . . . . . . . . . 404 Defroster Rear window . . . . . . . . . . . . . . . . . 406 Windshield . . . [...]

7 DISTRONIC Plus . . . . . . . . . . . . . . . 360 Hill start assist . . . . . . . . . . . . . . . . 359 Night View Assist . . . . . . . . . . . . . . 390 Park Assist . . . . . . . . . . . . . . . . . . . 379 Parktronic system . . . . . . . . . . . . . 376 Rear view camera . . . . . . . . . . . . . 388 Driving tips, automatic transmission . . . . .[...]

8 F Fastening the seat belts . . . . . . . . . . . 57 First aid kit . . . . . . . . . . . . . . . . . . . . . 492 Flat tire . . . . . . . . . . . . . . . . . . . . . . . . 571 Lowering the vehicle . . . . . . . . . . . 575 Mounting the spare wheel . . . . . . . 572 Preparing the vehicle . . . . . . . . . . . 572 Spare wheel . . . . . . . . . . . . [...]

9 H Hard plastic trim items, cleaning . . 489 Hazard warning flasher . . . . . . . . . . . 328 Headlamp cleaning system . . . . . . . 329 Headlamps Active Bi-Xenon headlamps . . . . . . 325 Automatic headlamp mode . . . . . . 326 Bi-Xenon . . . . . . . . . . . . . . . . 325, 566 Cleaning lenses . . . . . . . . . . . . . . . 485 Cleaning system . . [...]

10 K Key, Mechanical . . . . . . . . . . . . . . . . . 561 Loss of . . . . . . . . . . . . . . . . . . . . . . 300 Valet locking . . . . . . . . . . . . . . . . . 306 Key, SmartKey Battery check lamp . . . . . . . . . . . . 297 Checking batteries . . . . . . . . . . . . . 300 Factory setting . . . . . . . . . . . . 297, 299 Global locking (KEYLESS-[...]

11 Low-beam headlamps . . . . . . . . . . . . 325 Exterior lamp switch . . . . . . . . . . . 325 Replacing bulbs . . . . . . . . . . . . . . . 565 Switching on . . . . . . . . . . . . . . . . . 325 Lubricants . . . . . . . . . . . . . . . . . . . . . 603 M Maintenance . . . . . . . . . . . . . . . . . . . . . 20 Maintenance Call, automatic (Tele Ai[...]

12 Tele Aid . . . . . . . . . . . . . . . . . . . . . 524 Tire pressure . . . . . . . . . . . . . 510, 545 Tires . . . . . . . . . . . . . . . . . . . . 510, 545 Trunk . . . . . . . . . . . . . . . . . . . . . . . 530 Turn signals . . . . . . . . . . . . . . . . . . 541 Multifunction steering wheel Adjusting . . . . . . . . . . . . . . . . . . . . [...]

13 Park Assist . . . . . . . . . . . . . . . . . . . 379 Parktronic system . . . . . . . . . . . . . 376 Parking Guidance, Advanced . . . . . . 383 Parking position Exterior rear view mirrors . . . 322, 324 Transmission position . . . . . . . . . . 348 Parktronic system Cleaning system sensors . . . . . . . . 486 Malfunctions . . . . . . . . . . . [...]

14 Reminder, Seat belt see Seat belts, Telltale Remote control see Key, SmartKey Remote door unlock (Tele Aid) . . . . . 431 Replacing bulbs . . . . . . . . . . . . . . . . . 565 Reporting safety defects . . . . . . . . . . 23 Research Octane Number see RON Reserve fuel Messages in the multifunction display . . . . . . . . . . . . . . . . . . . . .[...]

15 Time . . . . . . . . . . . . . . . . . . . . . . . . . 96 Trunk opening-height restriction . . 226 Voice Control . . . . . . . . . . . . . . . . . . 97 Shelf below rear window, cleaning . 489 Side impact air bags . . . . . . . . . . . . . . 49 Side marker lamps Cleaning lenses . . . . . . . . . . . . . . . 485 Messages in the multifunction displ[...]

16 Emergency calls . . . . . . . . . . . . . . . 426 Information button . . . . . . . . . . . . . 428 Initiating an emergency call manually . . . . . . . . . . . . . . . . . . . . . 427 Messages in the multifunction display . . . . . . . . . . . . . . . . . . . . . . 524 Remote door unlock . . . . . . . . . . . . 431 Roadside Assistance button . . [...]

17 Towing eye bolt . . . . . . . . . . . . . . . . . 581 Towing the vehicle . . . . . . . . . . . . . . 580 Tow-start . . . . . . . . . . . . . . . . . . 578, 580 Traction . . . . . . . . . . . . . . . . . . . . . . . 472 Transmission see Automatic transmission Transmission fluid level . . . . . . . . . . 447 Transmission gear selector lever see Ge[...]

18 Telephone . . . . . . . . . . . . . . . . . . . 265 Troubleshooting . . . . . . . . . . . . . . . 289 W Warning sounds Advanced Parking Guidance . . . . . 385 DISTRONIC Plus . . . . . . . . . . . . . . . 362 Driver’s or passenger’s seat belt . . . 58 Electronic parking brake . . . . . . . . 518 Park Assist . . . . . . . . . . . . . . . . . .[...]

Operator’s Manual 19 Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz v[...]

Operator’s Manual 20 Service and warranty information The Service and Warranty Information booklet contains detailed information about the warranties covering your Mercedes-Benz, including: R New Car Limited Warranty R Emission System Warranty R Emission Performance Warranty R California, Connecticut, Maine, Massachusetts, New York, Pennsylvania,[...]

Operator’s Manual 21 Roadside Assistance The Mercedes-Benz Roadside Assistance Program provides factory-trained technical help in the event of a breakdown. Calls to the toll-free Roadside Assistance number 1-800-FOR-MERCedes (in the USA) 1-800-387-0100 (in Canada) will be answered by Mercedes-Benz Customer Assistance Representatives 24 hours a da[...]

Operating safety 22 Operating safety G Warning! Work improperly carried out on electronic components and associated software could cause them to cease functioning. Because the vehicle’s electronic components are interconnected, any modifications made may produce an undesired effect on other systems. Electronic malfunctions could seriously impair [...]

Reporting safety defects 23 Problems with your vehicle If you should experience a problem with your vehicle, particularly one that you believe may affect its safe operation, we urge you to contact an authorized Mercedes-Benz Center immediately to have the problem diagnosed and corrected if required. If the matter is not handled to your satisfaction[...]

Vehicle data recording 24 Vehicle data recording Information regarding electronic recording devices (Including notice pursuant to California Code § 9951) Please note that your vehicle is equipped with devices that can record vehicle systems data and, if equipped with the Tele Aid system, may transmit some data in certain accidents. This informatio[...]

25 Exterior view ....................................... 26 Cockpit ................................................. 28 Instrument cluster .............................. 30 Storage compartments ....................... 32 Control systems .................................. 34 Center console .................................... 37 Overhead control pa[...]

Exterior view 26 Exterior view At a glance[...]

Exterior view 27 i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Function Page 1 Trunk: Locking and unlocking 296 Opening and closing 302, 303 Valet locking 306 [...]

Cockpit 28 Cockpit At a glance[...]

Cockpit 29 Function Page 1 Combination switch: Turn signals 328 Wipers 331 High beam 328 2 Cruise control lever: Cruise control 357 DISTRONIC Plus 360 3 Horn 4 Multifunction steering wheel 237 5 Instrument cluster 355 6 Steering wheel gearshift control 351 7 Gear selector lever for automatic transmission 346 8 Control panel with: Front passenger fr[...]

Instrument cluster 30 Instrument cluster At a glance[...]

Instrument cluster 31 Function Page 1 Coolant temperature gauge 355 2 Fuel gauge with: Fuel tank reserve warning lamp 556 A High-beam headlamp indicator lamp 328 - Antilock Brake System (ABS) indicator lamp 549 = Supplemental Restraint System (SRS) indicator lamp 553 3 Parktronic/Park Assist warning indicator for left front area 376, 381 4 Multifun[...]

Storage compartments 32 Storage compartments At a glance[...]

Storage compartments 33 Function Page 1 Glove box 415 2 Document holder in sun visor 420 3 Door pocket 4 Storage bag 417 5 Door pocket Ashtray 422 6 Side storage pocket in trunk Retainer for Operator’s Manual pouch 7 Storage spaces under trunk floor 418 8 Side storage pocket in trunk Function Page 9 Door pocket Ashtray 422 a Storage bag 417 b Doo[...]

Control systems 34 Control systems At a glance[...]

Control systems 35 Function Page 1 Press button briefly L to cancel Voice Control System, back, confirm messages Press and hold button L to select the standard display 2 Press button & or ( to select menus Press button briefly % or $ • to select function or scroll through lists • within Audio menu to select previous or next track, scene or [...]

Control systems 36 Function Page 9 COMAND display 84 a CD/DVD changer 202 b PCMCIA card slot 204 c Favorite button 98 d Head restraint release switch 315 e Program mode selector switch for: Automatic transmission shift program 350 AIRMATIC suspension tuning 373 ABC suspension tuning 374 f Shortcut button for: CD/DVD 206 Radio 189 g Back button 90 h[...]

Center console 37 Center console Function Page 1 Thumbwheel for air volume control for left center air vent 401 2 Thumbwheel for air volume control for right center air vent 401 3 Air distribution and air volume, driver’s side (automatic mode) 399 4 Temperature control, driver’s side 400 5 Manual fan speed adjustment, driver’s side 403 6 Fron[...]

Overhead control panel 38 Overhead control panel Function Page 1 Eyeglasses compartment 416 2 Left reading lamp on/off 330 3 Rear interior lighting on/off 330 4 Front interior lighting on/ off 330 5 Power tilt/sliding sunroof switch or panorama roof with power tilt/sliding panel switch 406, 409 6 Tele Aid (emergency call system) button 425 7 Interi[...]

Driver’s door control panel 39 Driver’s door control panel Function Page 1 Inside door handle 300 2 Central unlocking switch 301 Central locking switch 301 3 Seat adjustment switch 310 4 Memory function (for storing seat, exterior mirror, and steering wheel settings) 323 Selector button for front passenger seat 311 5 Seat heating 317 Seat venti[...]

Rear door control panel 40 Rear door control panel Function Page 1 Selector button for right front passenger seat adjustment 3 311 2 Memory function (for storing seat settings), Canada only 323 3 Seat adjustment switch 310 4 Inside door handle 5 Switch for extending/ retracting rear window sunshade 421 6 Button for extending/ retracting panorama ro[...]

Rear passenger compartment 41 Rear passenger compartment Function Page 1 Cupholder under the rear center storage compartment 420 2 Cupholder in the rear center armrest 420 3 Control panel for rear multicontour seats 317 4 Armrest with integrated storage compartment 418 5 Rear storage box 418 At a glance Z[...]

42[...]

43 Vehicle equipment .............................. 44 Occupant safety .................................. 44 Panic alarm .......................................... 68 Driving safety systems ....................... 69 Anti-theft systems .............................. 79 Safety and security[...]

Occupant safety 44 Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Occupant safety Introduction In this section you will learn the most importa[...]

Occupant safety 45 see “Children in the vehicle” ( Y page 62). SRS indicator lamp The SRS system conducts a self-test when the ignition is switched on and in regular intervals while the engine is running. This facilitates detection of system malfunctions. The = indicator lamp in the instrument cluster comes on when the ignition is switched on a[...]

Occupant safety 46 a properly seated position and to wear their respective seat belt. For maximum protection in the event of a collision always be in normal seated position with your back against the seat backrest. Fasten your seat belt and make sure it is properly positioned on your body. Since the air bag inflates with considerable speed and forc[...]

Occupant safety 47 should the side impact air bags be deployed. (2) Always sit as upright as possible, properly use the seat belts, and for children 12 years old and under, use an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. (3) Always wear seat belts properly. If you bel[...]

Occupant safety 48 R Do not make any modification that could change the effectiveness of the seat belts. R Do not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequate protection. R No modifications of any kind may be made to any components or wiring of the SRS. This includes changing or remo[...]

Occupant safety 49 Driver and front passenger front air bags are deployed R in the event of certain frontal impacts R if impact exceeds a preset deployment threshold R if the system determines that air bag deployment can offer additional protection to that provided by the seat belt R depending on whether the seat belt is in use R independently of t[...]

Occupant safety 50 R independently of the front air bags R independently of the ETDs The front passenger side impact air bag will not deploy if the OCS senses that the front passenger seat is empty and the front passenger seat belt is not fastened (latch plate is not inserted into the buckle). With an empty front passenger seat and the seat belt fa[...]

Occupant safety 51 upright as possible with their back against the seat backrest and feet on the floor to be correctly classified. If the occupant’s weight is transferred to another object in the vehicle (e.g. by leaning on armrests), the OCS may not be able to properly approximate the occupant’s weight category. Furthermore, the occupant weigh[...]

Occupant safety 52 If the 59 indicator lamp is illuminated, the front passenger front air bag is deactivated and will not be deployed. If the 59 indicator lamp is not illuminated, the front passenger front air bag is activated and will be deployed R in the event of certain frontal impacts R if impact exceeds a preset deployment threshold R independ[...]

Occupant safety 53 driving to make sure the 59 indicator lamp is illuminated. If the 59 indicator lamp goes out or remains out, do not transport a child on the front passenger seat until the system has been repaired. A child in a rear-facing child restraint on the front passenger seat will be seriously injured or even killed if the front passenger [...]

Occupant safety 54 In order to ensure proper operation of the air bag system and OCS: R Do not place more than 4.4 lb (2 kg) into the storage bag on the back of the front passenger seat. Otherwise, the OCS may not be able to properly approximate the occupant weight category. R Do not place objects under and/or around the front passenger seat. R Do [...]

Occupant safety 55 Seat belts Safety notes The use of seat belts and infant and child restraint systems is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Even where this is not the case, all vehicle occupants should have their seat belts fastened whenever the vehicle is in motion. For in[...]

Occupant safety 56 section, as that could result in serious injuries in case of an accident. R Each occupant should wear their seat belt at all times, because seat belts help reduce the likelihood of and potential severity of injuries in accidents, including rollovers. The integrated restraint system includes SRS (driver front air bag, front passen[...]

Occupant safety 57 Do not allow the seat belt to get caught in the door or in the seat adjustment mechanism. This could damage the seat belt. Never attempt to make modifications to seat belts. This could impair the effectiveness of the seat belts. Fastening the seat belts G Warning! According to accident statistics, children are safer when properly[...]

Occupant safety 58 1 Seat belt height adjuster 2 Release button X Raising: Slide seat belt height adjuster 1 upward. Seat belt height adjuster 1 engages in different positions. X Lowering: Press and hold release button 2 . X Slide seat belt height adjuster 1 downward. X Release button 2 and make sure seat belt height adjuster 1 engages into place. [...]

Occupant safety 59 The seat belt telltale < will only go out if both the driver’s and the front passenger’s seat belt (with the front passenger seat occupied) are fastened, or the vehicle is standing still and a front door is opened. For more information, see “Practical hints” ( Y page 552). Emergency Tensioning Device (ETD), seat belt f[...]

Occupant safety 60 BAS Plus ( Y page 70) or the PRE-SAFE Brake ( Y page 76) is strongly intervening R critical dynamic driving situations, e.g. when the vehicle is understeering or oversteering because it has exceeded its physical limitations or in case of evasive steering maneuvers at speeds above approximately 85 mph (140 km/h) When you are drivi[...]

Occupant safety 61 You cannot remove the active head restraint on the driver’s and front passenger’s seats. G Warning! Only use seat or head restraint covers which have been tested and approved by Mercedes-Benz for your vehicle model. Using other seat or head restraint covers may interfere with or prevent the activation of the active head restr[...]

Occupant safety 62 Make sure: R You can reach steering wheel 1 with your arms slightly bent at the elbows. R You can move your legs freely. R All displays (including malfunction and indicator lamps) on the instrument cluster are clearly visible. Seat belt G Observe Safety notes, see page 55. X Fasten and position your seat belt 2 ( Y page 57) corre[...]

Occupant safety 63 G Warning! When leaving the vehicle, always remove the SmartKey from the starter switch. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle. A child’s unsupervised access to a vehicle[...]

Occupant safety 64 The use of infant or child restraints is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Infants and small children should be seated in an appropriate infant or child restraint system, properly secured in accordance with the manufacturer’s instructions for the child r[...]

Occupant safety 65 check installation. Periodically check the 59 indicator lamp while driving to make sure the 59 indicator lamp is illuminated. If the 59 indicator lamp goes out or remains out, do not transport a child on the front passenger seat until the system has been repaired. A child in a rear-facing child restraint on the front passenger se[...]

Occupant safety 66 X Bring the rear power seat backrest to a fully upright position ( Y page 310). X Remove anchorage ring cover 1 from the anchorage ring of the seat on which a child seat is to be installed. X Store anchorage ring cover 1 in a convenient place (e.g. glove box). 2 Anchorage ring 3 Hook 4 Top tether strap X Guide top tether strap 4 [...]

Occupant safety 67 Damaged or impact damaged child seats or child seat mounting fittings must be replaced. Non-LATCH-type child seats may also be used and can be installed using the vehicle’s seat belt system. Install child seat according to the manufacturer’s instructions. The LATCH-type anchors are covered with upholstery blends. 1 Indicates [...]

Panic alarm 68 1 Override switch 2 Indicator lamp X Activating: Press override switch 1 . Indicator lamp 2 comes on. The functions in the rear are disabled. It is still possible to operate the rear door windows using the switches located on the door control panel of the driver’s door. X Deactivating: Press override switch 1 again. Indicator lamp [...]

Driving safety systems 69 Driving safety systems Introduction This section contains information about the following driving safety systems: R ABS (Antilock Brake System) R Adaptive Brake R Adaptive Brake Lights R BAS (Brake Assist System) R BAS Plus (Brake Assist System Plus) R EBP (Electronic Brake Proportioning) R ESP ® (Electronic Stability Pro[...]

Driving safety systems 70 ignition. It goes out when the engine is running. Braking At the instant one of the wheels is about to lock up, a slight pulsation can be felt in the brake pedal, indicating that the ABS is in the regulating mode. X Keep firm and steady pressure on the brake pedal while you feel the pulsation. Continuous, steady brake peda[...]

Driving safety systems 71 G Warning! BAS Plus is a convenience system designed to assist the driver during vehicle operation. The responsibility for the vehicle speed and the distance to the vehicle ahead, including most importantly brake operation to assure safe stopping distance, always remains with the driver. Always pay attention to traffic con[...]

Driving safety systems 72 and vehicles driving offset from your vehicle center. After a hard collision or damage to the front of the vehicle from an accident, have the adjustment and operation of the radar sensors checked by an authorized Mercedes- Benz Center. If BAS Plus is not available due to a radar sensor malfunction, the braking system will [...]

Driving safety systems 73 ESP ® G Observe Safety notes, see page 69. The Electronic Stability Program (ESP ® ) is operational as soon as the engine is running and monitors the vehicle’s traction (force of adhesive friction between the tires and the road surface) and handling. The ESP ® recognizes when a wheel is spinning or if the vehicle star[...]

Driving safety systems 74 as specified in the “Technical data” section of this Operator’s Manual. i The DISTRONIC Plus and cruise control switch off automatically when the ESP ® engages. Electronic Traction System (ETS/4-ETS) G Observe Safety notes, see page 69. The ETS (Electronic Traction System) and 4-ETS (four-wheel Electronic Traction S[...]

Driving safety systems 75 R you cannot activate the cruise control or the DISTRONIC Plus R the cruise control or the DISTRONIC Plus switch off if activated i When the ESP ® is switched off and one or more drive wheels are spinning, the ESP ® warning lamp v in the instrument cluster flashes. However, the ESP ® will then not stabilize the vehicle.[...]

Driving safety systems 76 malfunction. Vehicle stability in standard driving maneuvers is reduced. Adapt your speed and driving to the prevailing road conditions and to the non- operating status of the ESP ® . ! Avoid spinning of a drive wheel for an extended period with the ESP ® switched off. This may cause serious damage to the drivetrain whic[...]

Driving safety systems 77 permitted. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user’s authority to operate the equipment. PRE-SAFE ® will only assist you by initiating braking automatically when the driver and front passenger have their seat belts fastened. Using the ra[...]

Driving safety systems 78 area clear at all times, including the area under the brake pedal. Objects stored in this area may impair pedal movement which could interfere with the braking ability of the PRE-SAFE ® Brake. Do not place your foot under the brake pedal – your foot could become caught. To maintain the proper distance to the vehicle in [...]

Anti-theft systems 79 i PRE-SAFE ® Brake will remain passive while DISTRONIC Plus is switched on ( Y page 360). After a hard collision or damage to the front of the vehicle from an accident, have the settings and operation of the radar sensors checked by an authorized Mercedes-Benz Center. Anti-theft systems Immobilizer The immobilizer prevents un[...]

Anti-theft systems 80 1 Indicator lamp X Arming: Lock the vehicle with the SmartKey or with KEYLESS-GO. The turn signal lamps flash three times to indicate that the vehicle is locked. Indicator lamp 1 flashes to indicate that the alarm system is armed. i If the turn signal lamps do not flash three times, a door or the trunk may not be properly clos[...]

81 Vehicle equipment .............................. 82 COMAND introduction ........................ 82 COMAND system settings ................. 95 COMAND navigation (introduction) ... 99 COMAND navigation system (entering a destination) .................... 111 COMAND navigation system (Point of interest entry) ............................... 132 C[...]

COMAND introduction 82 Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. COMAND introduction COMAND operating safety COMAND (Cockpit Management a[...]

COMAND introduction 83 driver’s personal responsibility. DVD maps do not cover all areas nor all routes within an area. Availability of functions while the vehicle is in motion For safety reasons, certain COMAND functions are not available while the vehicle is in motion or they are only available to a limited extent. You will notice this, for exa[...]

COMAND introduction 84 Function 7 , Volume control ( Y page 92) 8 F Mute button ( Y page 92) Example: X Switching directly to Radio or CD menu: Press M once or twice. COMAND display In the COMAND display, you will find the function currently selected and the corresponding menus. The COMAND display is divided into several areas. 1 Status line 2 Main[...]

COMAND introduction 85 Swiveling COMAND display 1 Button for swiveling display to the left 2 Button for swiveling display to the right You can swivel the COMAND display to the left or right. The buttons are on the right-hand side of the instrument cluster. Telephone keypad With the help of the telephone keypad, you can use your mobile phone if it i[...]

COMAND introduction 86 In this way, you can move through the menus, select menu items or exit menus. You can move through the menus either by rotating or sliding the controller. Operating COMAND controller Symbol How to use the COMAND controller Function n X Press briefly. R Confirming the selection of a menu item or list entry. R Exiting full-scre[...]

COMAND introduction 87 Symbol How to use the COMAND controller Function o m p X Slide. R Moving through horizontal menus. R Exiting vertical menus. X Slide and hold. R Fast forward or reverse for audio CD or audio DVD playback. R Moving through a navigation map. w m x X Slide and hold. R Moving through a navigation map. Operating COMAND Menu overvi[...]

COMAND introduction 88 Commands/menus Video DVD R Video DVD ( Y page 213) R Submenu overview ( Y page 214) R Switching to video DVD mode ( Y page 215) R Pause playback ( Y page 216) R DVD menu ( Y page 217) R Video AUX ( Y page 211) Vehicle R Exterior Lighting Delayed Switch-off ( Y page 220) R Locator Lighting ( Y page 221) R Exterior Mirror Conve[...]

COMAND introduction 89 Horizontal menus X Moving through the menu: Slide o m p or rotate y m z . X Selecting a menu item: Press n . X Exiting a menu without making a selection: Slide q m r in the opposite direction of the list orientation or press back button L . Entering characters Example illustration: Entering a navigation destination Selecting [...]

COMAND introduction 90 Selecting list item Example illustration: List of cities for navigation 1 Symbol for other selection options (e. g. county) X Selecting a line: Slide q m r or rotate y m z . X Confirming selection: Press n . Additional selection options are available for list entries featuring symbol 1 . For example, cities marked with symbol[...]

COMAND introduction 91 X Selecting Audio in the main menu: Slide q m . X Confirming selection: Press n . A selection list with the functions of the Audio main menu appears. X Selecting FM/AM Radio : Slide q m or rotate y m z . X Confirming selection: Press n . The FM/AM Radio menu appears. X Selecting Radio : Slide m r and rotate y m z . X Confirmi[...]

COMAND introduction 92 X Confirming selection: Press n . The selected station is saved at the designated position. The display switches back to the Radio display. Main menus of COMAND i The components and operating principles of COMAND can be found on ( Y page 82). Sound X Muting: Press shortcut button F in the center console ( Y page 83). The soun[...]

COMAND introduction 93 Adjusting volume for telephone calls In hands-free mode, you can adjust the volume of a telephone call while the call is currently active. During a telephone call: X Turn thumbwheel , . or X Press æ or ç on the multifunction steering wheel. Selecting sound settings You can select different sound settings for each individual[...]

COMAND introduction 94 Harman/kardon LOGIC7 ® surround sound is available for the following operating modes: R Audio DVD (MLP, DTS, PCM, and Dolby Digital audio formats) R Video DVD (DTS, PCM, and Dolby Digital audio formats) R Audio CD R MP3 R Radio (FM, AM, WB, Satellite) R PCMCIA R AUX i Since some DVDs contain both stereo as well as multi-chan[...]

COMAND system settings 95 compartment with LOGIC7 ® switched on. R The best sound results are achieved by playing high-quality audio CDs and audio DVDs. R For MP3 tracks, the bit rate should be at least 128 kbit/s. R Surround sound does not function for mono-signal sources. R In the event of poor radio reception quality, e. g. inside a tunnel, you[...]

COMAND system settings 96 Display ( Y page 96) Time ( Y page 96) Voice Control ( Y page 97) Language ( Y page 98) Favorite ( Y page 98) Reset ( Y page 99) Display settings Time settings Voice Control settings Language settings Assign favorite button Reset COMAND to factory settings Display settings Switching the display on or off X Switching off: S[...]

COMAND system settings 97 Subsequent operation depends on: R whether your navigation system has GPS reception R which country you have previously set You may either: R manually switch between Daylight Savings Time (Summer) and Standard time (Winter) in a list or R switch automatic Daylight Saving Time to standard time changeover (and vice versa) on[...]

COMAND system settings 98 X Select Vehicle £ System Settings £ Voice Control £ Start new individualization . A prompt appears asking whether you would like further information. X Select Yes or No . If you select No , the first part of individualization begins. If you select Yes , an information display will be shown with audio instruction. X Clo[...]

COMAND navigation (introduction) 99 You can use the favorite button to extend or retract the rear window sunshade. This is the default setting. R Display OFF ( Y page 96) You can use the favorite button to switch the COMAND display on or off. R Repeat Navigation Command ( Y page 144) You can use the favorite button to recall the last announcement i[...]

COMAND navigation (introduction) 100 traffic situation. DVD maps do not cover all areas nor all routes within an area. For example, if the traffic routing has been changed or the direction of a one-way road has been reversed. For this reason, you must always observe applicable road and traffic rules and regulations during your journey. Road and tra[...]

COMAND navigation (introduction) 101 position is unintentionally switched to 0 , restart the update. G Warning! Never leave the engine running in an enclosed space. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. Loading a DVD into th[...]

COMAND navigation (introduction) 102 Updating After you have loaded the DVD, you will see a message to the effect that the disc does not contain a recognizable audio format. X Confirming message: Press n . COMAND checks whether the map software on the DVD is compatible with the vehicle’s navigation system and whether it is compatible with the cur[...]

COMAND navigation (introduction) 103 X To allow the update to run to the end without canceling: Take no further action. If the update is successfully completed, you will see a message to this effect. X Confirming message: Press n . COMAND ejects the DVD. X Take DVD out of slot. The update is complete. If the update is not successfully completed, yo[...]

COMAND navigation (introduction) 104 software which is compatible with the system software. i Please note that the update must be allowed to run to the end in this case. If you interrupt it, the navigation system will continue to be non-operational. Initial use or use following a system software update In both these cases, the navigation system mus[...]

COMAND navigation (introduction) 105 X Deleting message: Switch COMAND off and back on. i If you switch the navigation system off/ on, it will be operational again until it has to access the faulty area of the hard disk again. The message will then appear again. Consult an authorized Mercedes-Benz Center. Units of measurement The units of measureme[...]

COMAND navigation (introduction) 106 Info (only with route guidance active) Traffic (TMC) Route (only with route guidance active) Position RPT (only with route guidance active) Destination Information about the active route guidance Calling up real-time traffic messages R Calling up route info R Calling up route browser R Calling up the detour func[...]

COMAND navigation (introduction) 107 Example illustration: Map with route guidance inactive and with the menu system hidden (full screen mode) 1 Current vehicle position 2 Set map orientation ( Y page 109) 3 Map scale selected ( Y page 107) Hiding or showing the menu system X Hiding: Slide q m . The Full Screen menu item appears in the main area of[...]

COMAND navigation (introduction) 108 1 Cross hair 2 Details of the cross hair position 3 Map scale i Display 2 may be the name of a road, for example, provided the digital map contains the necessary data. If no data is available, display 2 shows: R the coordinates of the cross hair if the geocoordinate display is switched on ( Y page 110) and the G[...]

COMAND navigation (introduction) 109 X Select map perspective: Select Navi £ Navi £ Map Display . The map display list appears. A dot R indicates the current setting. X Select Bird’s-eye view . The bird’s eye view is switched on or off, depending on the previous status. i If you scroll the map in the bird’s eye view, COMAND switches back to[...]

COMAND navigation (introduction) 110 Arrival time and distance You can set whether the estimated arrival time and the distance to the destination should be displayed in the map. X Displaying: Select Navi £ Navi £ Map Display . The map display list appears. A dot R indicates the current setting. X Select Arrival Time/Distance . Depending on the pr[...]

COMAND navigation system (entering a destination) 111 distance taking distance and driving time into account. X Select Navi £ Navi £ Mode . The mode list appears. A square ÿ indicates the current setting. X Select route type: Fast Route or Short Route . X Exit menu: Slide o m p or press back button L in the center console ( Y page 90). i If you [...]

COMAND navigation system (entering a destination) 112 Entering a destination by the address Introduction i It is not possible to enter an address when the vehicle has exceeded a certain speed. As soon as the vehicle speed drops below a certain value, the function is available again. i If Russian or Chinese is set as the system language, the address[...]

COMAND navigation system (entering a destination) 113 List of states with input characters 1 Top list entry based on the input data up to that point 2 Characters entered by the user 3 Characters automatically added by the system 4 Clear last character entry 5 Currently selectable characters 6 Currently non-selectable characters 7 Input characters 8[...]

COMAND navigation system (entering a destination) 114 X Selecting a state: Slide q m r or rotate y m z . X Canceling selection: Select Back by sliding o m and press n . or X Press back button L in the center console ( Y page 90). X Confirming selection: Press n . The address input menu appears again. It shows the abbreviation for the selected state[...]

COMAND navigation system (entering a destination) 115 for the selected state (USA) or province (Canada). X Continuing destination entry: Select one of the menu items mentioned above. Entering the zip code i It is not possible to enter a zip code if you have already entered other address data aside from the state (USA) or province (Canada). You can [...]

COMAND navigation system (entering a destination) 116 characters 4 disappear. You see the list of zip codes without the input characters. Here you can confirm the current entry or make another selection. During character entry, you can also manually switch to the list of zip codes without input characters at any time. X Switching manually to list o[...]

COMAND navigation system (entering a destination) 117 If COMAND cannot clearly attribute a previously entered street to a city, only those cities are available which have a street of that name. If you have not yet entered a street before entering the city, or cities within the state (USA) or province (Canada) previously entered are available. X In [...]

COMAND navigation system (entering a destination) 118 X Deleting individual characters: Select ) in the bottom line and press n . X Deleting an entire entry: Select ) in the bottom line and press n until the entire entry is deleted. X Canceling an entry: Select Back in the bottom line and press n . or X Press back button L in the center console ( Y[...]

COMAND navigation system (entering a destination) 119 i In this case, entering a POI is based on the city seen in the address input menu. R Save : Saving a destination in the destination memory ( Y page 149) R Start : Starting the route calculation ( Y page 127) X Continuing or completing destination entry: Select one of the menu items mentioned ab[...]

COMAND navigation system (entering a destination) 120 X Deleting individual characters: Select ) in the bottom line and press n . X Deleting an entire entry: Select ) in the bottom line and press n until the entire entry is deleted. X Canceling an entry: Select Back in the bottom line and press n . or X Press back button L in the center console ( Y[...]

COMAND navigation system (entering a destination) 121 i In this case, using the map for destination entry is based on the city seen in the address input menu. R House No. : Entering the house number ( Y page 123) R Intersection : Entering the intersection ( Y page 125) i Entering an intersection is restricted to streets within the vicinity of the s[...]

COMAND navigation system (entering a destination) 122 While the characters are being selected as described below, top list entry 1 always shows the center which best corresponds to the input data as it has been entered up to that point. At the same time, COMAND automatically supplements characters 2 entered by the user with appropriate characters 3[...]

COMAND navigation system (entering a destination) 123 R Save : Saving a destination in the destination memory ( Y page 149) R Start : Starting the route calculation ( Y page 127) X Continuing or completing destination entry: Select one of the menu items mentioned above. Entering a house number i The house number can only be entered after the street[...]

COMAND navigation system (entering a destination) 124 i In this case, using the map for destination entry is based on the city seen in the address input menu. R POI : Entering a point of interest ( Y page 132) i In this case, entering a POI is based on the city seen in the address input menu. R Save : Saving a destination in the destination memory [...]

COMAND navigation system (entering a destination) 125 X Canceling an entry: Select Back in the bottom line and press n . or X Press back button L in the center console ( Y page 90). As soon as COMAND can clearly attribute the numbers entered to a house number, the input characters 4 disappear. You see the list of house numbers without the input cha[...]

COMAND navigation system (entering a destination) 126 X In the address input menu, select Intersection . The list of intersections appears either with or without the input characters ( Y page 127). Whether or not the input characters appear depends on how many intersections are available for the selected street. List of intersections with input cha[...]

COMAND navigation system (entering a destination) 127 List of intersections without input characters X Selecting an intersection: Slide q m r or rotate y m z . X Confirming selection: Press n . Either the address input menu appears again, or the city input menu. i The city input menu appears if the intersection entered cannot be clearly attributed [...]

COMAND navigation system (entering a destination) 128 whether you want to end the current route guidance. X Select Yes or No . If you select Yes , COMAND will stop the route guidance and start the route calculation for the new destination. If you select No , COMAND will continue with the active route guidance. The new destination is discarded. Duri[...]

COMAND navigation system (entering a destination) 129 While the characters are being selected as described below, the top list entry 1 always shows the destination which best corresponds to the input data as it has been entered up to that point. At the same time, COMAND automatically supplements characters 2 entered by the user with appropriate cha[...]

COMAND navigation system (entering a destination) 130 Entering a destination from the list of last destinations X Select Navi £ Destination £ From Last Destinations . The list of last destinations appears. The most recent destination is at the top of the list. X Select desired destination. X Starting route calculation: Select Start , see also ( Y[...]

COMAND navigation system (entering a destination) 131 you will see the display Destination from map . X Starting route calculation: Select Start , see also ( Y page 127). Entering a stopover i When route guidance is active, you can enter a stopover. Stopovers can be predefined destinations from the following predefined categories: R Mercedes-Benz C[...]

COMAND navigation system (Point of interest entry) 132 X Enter a destination from the destination memory ( Y page 128). R From Last Destinations selection: X Enter a destination from the list of last destinations ( Y page 130). R From POIs selection: X Enter a special destination ( Y page 132). X Starting route calculation: After entering a destina[...]

COMAND navigation system (Point of interest entry) 133 X Then proceed as described in the “Entering a city” section ( Y page 116). X After entering the city, continue with designating the POI category ( Y page 133). Option 2 X Enter an address in the address input menu ( Y page 112). X Select POI . X Continue with designating the POI category ([...]

COMAND navigation system (Point of interest entry) 134 Entering a category Depending on the number of available categories, the main category list appears for category entry either with or without input characters ( Y page 135). Main category list with input characters When this list appears, the input characters 5 are automatically activated. 1 To[...]

COMAND navigation system (Point of interest entry) 135 Main category list without input characters Example illustration: Main category list for POIs in the surrounding area 1 Category 2 Symbol for available POIs or other available subcategories X Selecting a main category: Slide q m r or rotate y m z . X Canceling selection: Select Back and press n[...]

COMAND navigation system (Point of interest entry) 136 The illustration below shows by way of example the POI list for the RESTAURANT main category, FRENCH CUISINE subcategory within the surrounding area. 1 Compass heading to the destination 2 Linear distance to the destination 3 Special destination i Displays 1 and 2 are not visible if you have al[...]

COMAND navigation system (Point of interest entry) 137 While the characters are being selected as described below, the top list entry 1 always shows the POI that best corresponds to the input data as it has been entered up to that point. At the same time, COMAND automatically supplements characters 2 entered by the user with appropriate characters [...]

COMAND navigation system (Point of interest entry) 138 X Expanding list: In one of the lists select Options £ Expand Search . The list is expanded. Options only in POI lists X Displaying details of the selected entry: Select Options £ Details . The detailed view appears. X Closing detailed view: Select OK . Entering a POI from the map i If the cr[...]

COMAND navigation system (route guidance) 139 COMAND navigation system (route guidance) Route guidance G Observe Safety notes, see page 99. COMAND guides you to the destination using navigation commands in the form of audible navigation announcements and route guidance displays. i The route guidance displays can only be seen if the display is switc[...]

COMAND navigation system (route guidance) 140 The following example illustration shows the intersection zoom in the right half. 1 Next road 2 Driving maneuver (turn left) 3 Graphical representation of the distance to the driving maneuver 4 Point at which the driving maneuver takes place (light blue dot, shown in both the left and right displays) 5 [...]

COMAND navigation system (route guidance) 141 Example of a display without driving maneuvers 1 Main destination < 2 Stopover = (only visible if a stopover has been entered) 3 Route (highlighted blue) 4 Current vehicle position; the triangle indicates the vehicle’s direction of travel 5 Set map orientation – for an explanation and settings, s[...]

COMAND navigation system (route guidance) 142 Before the vehicle reaches a partially digitized area, COMAND notifies you of this with the following announcements: R Be prepared to enter an area where turn by turn guidance cannot be provided. R In 700 feet you will enter an area where turn by turn guidance cannot be provided. i The indicated distanc[...]

COMAND navigation system (route guidance) 143 guides you for as long as possible with navigation announcements and displays on roads known to the system. Shortly before you reach the last known the point to leave the digitized road network, you will hear the announcement The destination is nearby. Follow the arrow on the display . You will then see[...]

COMAND navigation system (route guidance) 144 Off-road during route guidance The road layout may differ from the data on the digital map, due to road construction measures, for example. In such cases, the system cannot allocate the vehicle position to the digital map and the vehicle is therefore in an off-road position. The Off Road message and an [...]

COMAND navigation system (during route guidance) 145 COMAND navigation system (during route guidance) Cancel route guidance X Select Destination £ Cancel Route Guidance in map view with the menu system displayed ( Y page 107). Continuing canceled route guidance X Select Destination £ Continue Route Guidance in map view with the menu system displa[...]

COMAND navigation system (during route guidance) 146 i COMAND uses the time set in COMAND as the basis for calculating the estimated arrival time. The clock must be set correctly in COMAND ( Y page 96). The calculation of the estimated arrival time does not additionally take into account whether Daylight Saving Time or standard time is applicable a[...]

COMAND navigation system (real-time traffic) 147 1 Blocked route section 2 Current vehicle position; the triangle indicates the vehicle’s direction of travel 3 Information about the blocked route section i Blocked route section 1 is always highlighted in red/white. The information about blocked route section 3 shows which section of the route is [...]

COMAND navigation system (real-time traffic) 148 The following shows the possible symbol displays. 1 Traffic jam on the route (symbol with red border) 2 Traffic jam away from the route (symbol with gray border) 3 Stop-and-go traffic on the route (symbol with red border) 4 Stop-and-go traffic away from the route (symbol with gray border) 5 Blocked s[...]

COMAND navigation system (destination memory) 149 X Display all messages: Select Display All Messages . All streets are shown for which messages are present, as well as for those which are not on the route. X Read a message: Select a street. You can find an example message below. X Close the list: Slide o m p once or repeatedly. Example message 1 S[...]

COMAND navigation system (destination memory) 150 Saving a destination from the list of last destinations X Select Navi £ Destination £ From Last Destinations . The list of last destinations appears. X Select desired destination. The address of the destination is displayed. X Select Save . You can now select save options. Selecting save options S[...]

COMAND navigation system (destination memory) 151 Deleting a destination from the destination memory X Select Navi £ Destination £ From Memory . Depending on the number of entries in the destination memory, you will see the destination memory list with or without input characters. Example illustration: Destination memory list without input charac[...]

COMAND navigation system (destination memory) 152 Example illustration: Destination memory list without input characters In the destination memory list without input characters, the My Address entry is automatically highlighted. Example illustration: Destination memory list with input characters 1 Input characters In the destination memory list wit[...]

COMAND navigation system (destination memory) 153 X Select desired address book entry. Proceed as described in the “Searching for an address book entry” section ( Y page 176). Once the address data is complete and if it matches the digital map data, COMAND saves the entry as your own address in the destination memory. If address data is still m[...]

COMAND navigation system (last destinations) 154 X Press n . If your own address has already been assigned, you will see the menu for starting route guidance with your own address data. X Exiting menu: Select Back . Destination memory list with input characters 1 Input characters In the destination memory list with input characters 1 , the input ch[...]

COMAND telephone 155 Saving the vehicle position in the list of last destinations X Centering map on the vehicle’s position: Select Navi £ Position £ Vehicle Position Map . X Saving: Select Navi £ Position £ Save Position . COMAND saves the current vehicle position as a destination in the list of last destinations. Saving the cross hair posit[...]

COMAND telephone 156 without being connected to an external antenna) from inside the vehicle while the engine is running. Doing so could lead to a malfunction of the vehicle’s electronic system, possibly resulting in an accident and/or serious personal injury. General notes i USA only: This device complies with Part 15 of the FCC Rules. Operation[...]

COMAND telephone 157 control system ( Y page 248) or Voice Control. i In order for the functions described in this section to work correctly, the Bluetooth ® headset must be linked to COMAND ( Y page 184). Please make sure any Bluetooth ® headset linked with the mobile phone is switched off or that the headset is linked with COMAND before you ins[...]

COMAND telephone 158 at 1-800-FOR-MERCedes or the nearest authorized Mercedes-Benz Center. Switching telephone on or off X Switching on: Insert mobile phone into cradle when COMAND is switched on. or X Switch on the mobile phone (see mobile phone operating instructions). X Switching off: Select Telephone £ Telephone £ Telephone OFF . or X Switch [...]

COMAND telephone 159 emergency call by using COMAND and the mobile phone. If you cannot make an emergency call, you must initiate rescue measures yourself. The “911” emergency call is a public service. Any misuse is punishable by law. i A roof cargo container may impair mobile phone reception. In an emergency, remove the mobile phone from the m[...]

COMAND telephone 160 Entering the PIN2 i The PIN2 entry applies only to GSM mobile phones. The phone may request the PIN2 in order to use certain functions. A corresponding message appears in the display. X Enter PIN2 digits into mobile phone. Entering the PUK/PUK2 i The PUK/PUK2 entry ( Personal Unblocking Key) applies only to GSM mobile phones. I[...]

COMAND telephone 161 Name (only when the mobile phone is inserted in the cradle) Data/Connections Call lists (not during a call) Text message (not during a call) DTMF (only during a call) Mic OFF/ON (only during a call) Display COMAND phone book R Address book R Bluetooth ® Display call list selection: R Calls received R Calls dialed Call up SMS i[...]

COMAND telephone 162 6 To call up text message (SMS) ( Y page 186) 7 To display call list selection ( Y page 162) Mailbox The symbol ò in the example illustration above indicates that your mailbox contains new voice messages. You will have to call the mailbox in order to retrieve the messages. You can call your mailbox by: R speed dialing ( Y page[...]

COMAND telephone 163 You will see the telephone number of caller 6 if R the caller transmitted the telephone number R no caller data is saved in either the COMAND address book or the phone book on the mobile phone An unknown caller 5 has not transmitted his or her telephone number. i In the list of dialed calls, you will see the name of the person [...]

COMAND telephone 164 1 Data field 2 Input mark (cursor) 3 Input characters X If you want to change the available characters: Proceed as described in the “Changing data field” paragraph in the “Assigning a New Entry in the Address Book” section ( Y page 171). Adding to an existing entry in the COMAND address book X Slide o m p or rotate y m [...]

COMAND telephone 165 X Use the mobile phone (see mobile phone operating instructions). or X Use the Bluetooth ® headset (see headset operating instructions). i The use of a Bluetooth ® headset requires Bluetooth ® to be activated and the Bluetooth ® headset to be authorized ( Y page 184). If you have accepted the call using COMAND, the telephon[...]

COMAND telephone 166 selected and the s button on the telephone keypad does not function. Placing a call to a call list entry or COMAND phone book entry X Call up a call list and select an entry ( Y page 162). or X Call up COMAND phone book and select an entry ( Y page 169). X Connecting a call: Press n . Speed dialing You can save telephone number[...]

COMAND telephone 167 Functions during a single-call connection Example illustration: Telephone mode during a call 1 Symbol ° for active telephone connection (also visible in other operating modes) 2 Signal strength display 3 To switch hands-free microphone on or off 4 Length of call display 5 To send character strings 6 To end a call 7 Person you [...]

COMAND telephone 168 X Sending individual characters: Rotate y m z or slide o m p and select desired character. Each character you select can be seen in the main area and is sent immediately. X Sending a phone book entry as a character string: Select Name . X Select desired phone book entry. The entry is immediately sent as a character string. i Te[...]

COMAND telephone 169 available to you which are described in the “Functions during a single- call connection” section ( Y page 167). COMAND phone book The COMAND phone book contains both the COMAND address book entries and mobile phone entries that have at least one telephone number. The COMAND address book entries are permanently available eve[...]

COMAND telephone 170 Switching between the smart speller and the list X Switching from the smart speller to the list: Slide q m repeatedly or press n until the smart speller is hidden. or X Rotate y m z or slide o m p and select d . The smart speller is hidden. Example illustration: List of phone book entries with name display and hidden smart spel[...]

COMAND telephone 171 X Entering characters: Select the characters of the entry you are searching for one by one. X Deleting individual characters: Select ) and briefly press n . Each time you enter or delete a character, the closest match will be displayed at the top of the list. X Deleting an entire entry: Select ) and press and hold n until the e[...]

COMAND telephone 172 X Selecting a telephone category: Select a category, e. g. Land Line . X Confirming selection: Select Save . The input menu appears with the data fields. 1 Data field 2 Input mark (cursor) 3 Input characters X Changing data field: Slide q m r repeatedly until desired data field is highlighted. or X Select [ or ] repeatedly unti[...]

COMAND telephone 173 X Deleting: Select entry ( Y page 170). X Select Options £ Delete . A prompt appears asking whether the entry should be deleted. X Select Yes or No . Once Yes has been selected, the entry will be deleted according to the rules mentioned above. Saving a phone book entry from the mobile phone in the address book i This function [...]

COMAND telephone 174 X After selecting an entry, press n . If there are fewer than four numbers assigned to the selected entry in the selected number category, COMAND will save the data. If four numbers are saved for the selected entry, a prompt will appear asking whether you want to overwrite one of the existing numbers. X Select Yes or No . If yo[...]

COMAND telephone 175 into the cradle, COMAND reads-in the phone book entries saved in the mobile phone and stores the entries as a separate list from the COMAND address book. This list is a copy of the phone’s phone book. This can take several minutes, depending on how many entries the phone book and the address book contain. After the read-in pr[...]

COMAND telephone 176 Examples: R Florida or FL R Colorado or CO R Alberta or AB R Ontario or ON X Select Telephone £ Data/ Connections £ Address Book £ Options £ New Entry . The input menu appears with the data fields and the input characters. Example illustration: Input menu for private data 1 To switch between work and home data ( or @ symb[...]

COMAND telephone 177 1 Symbol ¤ for complete address data from the navigation system 2 Symbol y for summarized entries from the mobile phone with the same name but different telephone numbers 3 Category symbol 4 Smart speller 5 Symbol ¦ for voice entry 6 Back to the main address book display Entries with category symbol 3 come from the mobile p[...]

COMAND telephone 178 X Canceling search: Switch from the smart speller to the list ( Y page 177). The entry at the top of the list is automatically highlighted. X Going back to main address book display: If necessary, switch from the list to the smart speller ( Y page 177) and select Back in the smart speller. Searching via the list X If necessary,[...]

COMAND telephone 179 Displaying abbreviated content in full X Select Options £ Details . The display is shown in full. X Closing entire display: Slide o m p or press n . Closing the detailed view X Select Back . Displaying of a complete phone book entry in the mobile phone i The mobile phone must be inserted in the cradle. Searching for the desire[...]

COMAND telephone 180 Changing the description of a telephone number data field i This function is not possible for phone book entries in the mobile phone. X Display the details of an entry and highlight the telephone number data field ( Y page 178). X Select Options £ Change Category . X Select a number category, e. g. Home . X Select a telephone [...]

COMAND telephone 181 Calling a number saved in an entry i To do this, COMAND must be equipped with a telephone. The mobile phone must be inserted in the cradle. X Display the details of an entry and highlight the telephone number data field ( Y page 178). X Press n and select Call . or X Select Options £ Call . In both cases, the telephone connect[...]

COMAND telephone 182 i If you have added data, COMAND saves your additions. This means that you do not need to reenter this additional data later on. The COMAND memory saves the additional data in a special field, which cannot be displayed. The data, which you have entered in the address book initially in the display, remains unchanged. If all data[...]

COMAND telephone 183 1 Data field 2 Input mark (cursor) 3 Input characters X Proceed as described in the “Changing a data field” paragraph in the “Creating a new address book entry” section ( Y page 175). Saving a phone book entry from the mobile phone in an existing address book entry i The mobile phone must be inserted in the cradle. X Se[...]

COMAND telephone 184 Bluetooth ® settings General information about Bluetooth ® Bluetooth ® technology is the standard for short-range wireless technologies, suitable for transmitting voice and data. Bluetooth ® can be used to exchange vCards or make calls using a headset. Bluetooth ® technology uses the freely available ISM (Industrial Scient[...]

COMAND telephone 185 1 Authorized and detected device – device and padlock symbol are the same color 2 Device which was not detected, but which has been authorized in the past – device and padlock symbol are different colors (the device may be switched off or not in the vehicle, for example) 3 Newly detected device - not yet authorized (no symb[...]

COMAND telephone 186 i If you de-authorize a device which has been authorized in the past and which is not detected in the search, this device will no longer be displayed in the device list. Devices which have been authorized in the past but which are not detected in the search are either not switched on or not in the vehicle. SMS messages (Short M[...]

COMAND telephone 187 Selecting an SMS message X Rotate y m z or slide q m r and then press n . Showing abbreviated sender display in full X Select SMS message £ Options £ Details . The detailed view appears. X Closing detailed view: Slide q m r or press n . Calling an SMS sender X Select SMS message £ Options £ Call . The telephone connects the[...]

COMAND FM/AM radio 188 Using data in a text message i If the SMS message contains telephone numbers or navigable address data, you can select this data and place a telephone call or transfer the address data to the navigation system. X Selecting data from the text: Rotate y m z or slide q m r . X Using data: Press n £ Use . If you have selected a [...]

COMAND FM/AM radio 189 Radio (except Weather Band) Presets (except Weather Band) Channel (only Weather Band) FM or AM or WB Sound Station List (in FM wave band only) Autostore Channel list Switch to FM wave band Treble Save Station Preset station list Switch to AM wave band Bass Frequency Entry Switch to Weather Band Balance/Fader Show Station Info[...]

COMAND FM/AM radio 190 Switching wave bands You can switch between the FM, AM and WB (Weather Band) wave bands. X Select Audio £ Audio £ FM/AM Radio £ FM or AM or WB . You will hear the station last tuned in on the selected wave band. Selecting stations/channels You have the following selection options: R The station list R The search function R[...]

COMAND FM/AM radio 191 Entering the frequency using the COMAND controller X Select Radio £ Frequency Entry . The menu for manual frequency entry appears. X Exiting menu without making an entry: Press L back button in the center console ( Y page 90). X Increasing or decreasing number: Slide q m r or rotate y m z . i You can only select currently pe[...]

COMAND FM/AM radio 192 X Selecting a preset position: Slide q m r or rotate y m z . Saving a station to a selected preset position If you have called up the station preset screen using option 1: X Press n briefly. In options 2 and 3: X Press and hold n until you hear a signal. The station is saved. Saving using the autostore function i This functio[...]

COMAND satellite radio 193 COMAND satellite radio Safety notes G Warning! Please devote your attention first and foremost to the traffic situation you are in. Before your journey, please familiarize yourself with the radio functions. Only use the COMAND when road and traffic conditions permit you to do so. Otherwise you could be involved in an acci[...]

COMAND satellite radio 194 Introduction to satellite radio i A subscription to SIRIUS Satellite Radio service provider is required for the satellite radio operation described in this section. Contact an authorized Mercedes-Benz Center for details and availability for your vehicle. SIRIUS Satellite Radio provides over 130 channels of digital-quality[...]

COMAND satellite radio 195 www.sirius.com (USA) or www.siriuscanada.com (Canada). X Closing screen: Press n . Preview channel i If the satellite radio service has not been subscribed to, only the preview channel is available. You cannot tune in another channel. If you try to do this, you will see the screen described in the section “Satellite rad[...]

COMAND satellite radio 196 X Select category by rotating y m z or sliding q m r and press n . When selecting a channel using the channel search function or the channel list, you have access to the channels you subscribe to and which are included in the selected category. i When you select the category All Channels , you have access to all the chann[...]

COMAND satellite radio 197 Tuning in channels using manual channel number entry i If you try to tune in a channel when the satellite radio service is not activated, you will see the screen described in the section “Satellite radio service is not activated” ( Y page 194). Entering the channel number using the COMAND controller X Select Audio £ [...]

COMAND satellite radio 198 Option 2 X Press n when the main area is selected. Option 3 X Select Audio £ Audio £ Sat Radio £ Presets . All three of these will call up a preset menu. The dot R in front of a preset position indicates that this is the channel currently selected and being listened to. X Selecting a preset position: Slide q m r or rot[...]

COMAND audio CD/audio DVD/MP3 199 X Select £ Audio £ Audio £ Sat Radio £ Sat Radio £ Service . The telephone number of the SIRIUS Service Center and the twelve-digit electronic serial number (SIRIUS-ID) of the particular receiver are displayed. X Closing screen: Slide o m p or press n . COMAND audio CD/audio DVD/MP3 Safety notes G Warning! COM[...]

COMAND audio CD/audio DVD/MP3 200 to access the audio CD tracks. Access to the MP3/WMA tracks is not possible. Similarly, if the first session type is according to the data CD standard containing MP3/ WMA tracks and the second session type is according to the audio CD standard, COMAND will treat the CD as a data CD. This means that it is only possi[...]

COMAND audio CD/audio DVD/MP3 201 This is especially the case if you have activated the surround sound function. WMA (Windows Media Audio) Windows Media Audio (WMA) is an audio data compression technology developed by Microsoft. The audio system supports the following types of audio files: R fixed bit rates of 5 kBit/s up to 384 kBit/s R sampling r[...]

COMAND audio CD/audio DVD/MP3 202 ! Do not affix stickers or labels to the discs. These could peel away and damage COMAND. COMAND is designed to hold discs which comply with the IEC 60908 standard. You can therefore only use discs with a maximum thickness of 1.3 mm. If you insert thicker discs, e. g. those that contain data on both sides (DVD on on[...]

COMAND audio CD/audio DVD/MP3 203 X Wait until LED for magazine tray button 3 which you pressed flashes quickly. X Insert disc into slot 1 . The DVD changer draws the disc in and begins playback if: R it has been loaded correctly R it is a permissible type of disc Loading all six magazine trays X Press load button 2 . The DVD changer checks the loa[...]

COMAND audio CD/audio DVD/MP3 204 Inserting/Ejecting a PCMCIA card i COMAND supports commercially available PCMCIA cards or PCMCIA card adapters with storage media that may not be designed for the temperatures which occur in the vehicle. You should therefore remove the PCMCIA card from the vehicle when not in use since extreme temperatures could da[...]

COMAND audio CD/audio DVD/MP3 205 CD or DVD-A or MP3 Pause/Stop/Play (audio DVD mode only) Tracks/ Track List/ Tracks A-Z Folders (MP3 mode only) Changer Sound Normal Track Sequence Pausing playback Showing track list (audio CD mode and audio DVD mode) Selecting folder Selecting medium Treble Random Tracks Stopping playback Displaying alphabetical [...]

COMAND audio CD/audio DVD/MP3 206 Switching to audio CD, audio DVD or MP3 mode X Load CD/DVD ( Y page 202) or PCMCIA card ( Y page 204). or X Select Audio £ Audio , then CD , DVD- Audio or MP3 . or X Press the M shortcut button once or twice. i The M shortcut button takes you directly to the previously set disc mode (audio CD/DVD, MP3-CD/DVD, vide[...]

COMAND audio CD/audio DVD/MP3 207 Example display in MP3 mode 1 Current playback option 2 Medium type 3 Disc number (not on PCMCIA card) 4 Track name 5 Current folder path 6 Current folder 7 Track time 8 Graphic time and track display 9 Sound settings a Medium selection b Folder listing c Track listing d Playback options Stop function i This functi[...]

COMAND audio CD/audio DVD/MP3 208 Selecting a track Selecting by skipping to tracks X Skipping forwards or backwards to a track (in CD or DVD mode only): Rotate y m z . i Skipping forwards through the tracks skips to the next track. Skipping backwards through the tracks skips to the beginning of the current track if the track has been playing for m[...]

COMAND audio CD/audio DVD/MP3 209 1 Back folder symbol 2 Current track symbol 3 Track symbol X Move to the superordinate folder: Select the Q symbol. The display changes to the next folder up in the folder structure on the disc. 1 Back folder symbol 2 Current folder symbol 3 Folder symbol containing tracks X Selecting a folder: Select desired folde[...]

COMAND AUX 210 Playback options The following options are available: R Normal Track Sequence Tracks playback in the order on the disc (e. g. track 1, 2, 3, etc.). R Random Tracks Tracks playback in a random order (e. g. track 3, 8, 5, etc.). R Random Folder (in MP3 mode only) Tracks in the active folder and any subfolders playback in random order. [...]

COMAND AUX 211 Audio AUX Switching to Audio AUX mode X Select Audio £ Audio £ AUX . The Audio AUX menu appears. You will hear the medium in the external audio source if it has been connected and switched to play. i Please refer to the corresponding operating instructions for information about how to operate the external audio source. You can adju[...]

COMAND AUX 212 i Please refer to the corresponding operating instructions for information about how to operate the external video source. You can adjust the following settings in Video AUX mode: R Screen settings ( Y page 212) R Volume ( Y page 92) R Balance and fader ( Y page 93) R Treble and bass ( Y page 93) R Surround sound ( Y page 93) Screen [...]

COMAND video DVD 213 COMAND video DVD Safety notes G Observe Safety notes, see page 199. Automatic picture fade-out If a video DVD is playing when the vehicle is shifted from park position P into neutral position N , drive position D or reverse gear R the picture is faded out automatically and the following message appears in the display: In order [...]

COMAND video DVD 214 Do not use CDs with a diameter of 8 cm. Attempting to play discs with a diameter of 8 cm or playing such discs with an adapter may cause damage COMAND. Such damages are not covered by the Mercedes-Benz Limited Warranty. Only use round discs with a diameter of 12 cm. Notes about handling DVDs For notes about handling DVDs, see ([...]

COMAND video DVD 215 DVD-V Pause/Play Stop Changer Sound 4:3 Widescreen Switching to video DVD mode X Insert a DVD ( Y page 202). or X Select Video £ Video £ Video DVD . or X Press the M shortcut button once or twice. i The M shortcut button takes you directly to the previously set disc mode (audio CD/DVD, MP3-CD/DVD or video DVD). The number of [...]

COMAND video DVD 216 3 Stop 4 Medium selection 5 Sound settings Fast forward/rewind X Slide o m p and hold until you get to the desired scene. Selecting the DVD medium X Select Video £ Video £ Video DVD . X Show the menu system, if necessary ( Y page 215). X Select Changer . The media list appears. The dot R indicates the current medium. X Select[...]

COMAND video DVD 217 Entering the scene/chapter using the telephone keypad X Press > on the telephone keypad ( Y page 85). X Enter scene/chapter using the A - 9 buttons. COMAND tunes in to the scene/chapter entered. Selecting film/track i This function is only available if the DVD is comprised of several film/tracks. X Select Video £ Video £ V[...]

COMAND video DVD 218 X Reconfirming the selection: Select Select . COMAND carries out the action defined by the selected DVD menu item. i Depending on the DVD, it is possible the menu item Play either has no function or has no function in certain parts of the DVD menu. Stopping the film or skipping to the beginning/end of a scene X Select a menu it[...]

COMAND video DVD 219 X Select the menu item Back (to the film) in the selection menu. i Depending on the DVD, it is possible the menu item Back (to the film) either has no function or has no function in certain parts of the DVD menu. Setting the language and audio format i This function is not available for all DVDs. If it is available, you can set[...]

COMAND vehicle menu 220 COMAND vehicle menu Introduction In this menu, you can program the following vehicle functions: Function Exterior Lighting Delayed Switch-off ( Y page 220) Locator Lighting ( Y page 221) Exterior Mirror Convenience Settings ( Y page 222) Automatic Locking ( Y page 222) Easy Entry/Exit Feature ( Y page 223) Interior Ambient L[...]

COMAND vehicle menu 221 X Selecting length of time: Slide q m r or rotate y m z . X Confirming selection: Press n . To activate night security illumination: X Select delayed switch-off period (see above). X Turn the exterior lamp switch to position * before turning off the engine. Locator lighting on/off i The components and operating principles of[...]

COMAND vehicle menu 222 To activate locator lighting: X Make sure the function Locator Lighting is set. X Turn the exterior lamp switch to position * when exiting the vehicle. Exterior mirror convenience settings i The components and operating principles of COMAND can be found on ( Y page 82). In the Exterior Mirror Convenience Settings menu, you c[...]

COMAND vehicle menu 223 X Switching automatic locking on or off: Press n . or X Select Vehicle £ Vehicle £ Automatic Locking . A checkmark appears when automatic locking is switched on. X Confirming selection: Press n . X Slide o m p to exit. Activating easy-entry/exit feature i The components and operating principles of COMAND can be found on ( [...]

COMAND vehicle menu 224 X Confirming selection: Press n . or X Select Vehicle £ Vehicle £ Easy Entry/Exit Feature . X Confirming selection: Press n . A selection list appears. The current setting is indicated by a dot R . X Selecting a setting: Slide q m r or rotate y m z . X Confirming selection: Press n . Setting interior ambient lighting i The[...]

COMAND vehicle menu 225 You can select: R 0 sec. , the delayed switch-off feature is deactivated R 15 sec. , 30 sec. , 45 sec. , or 60 sec. , the delayed switch-off feature is activated X Select Vehicle . The main area is active. X Selecting Interior Lighting Delayed Switch-off menu: Slide o m p or rotate y m z . X Confirming selection: Press n . A[...]

COMAND vehicle menu 226 X Extending or retracting rear window sunshade: Press n . or X Select Vehicle £ Vehicle £ Rear- window Sunshade . X Confirming selection: Press n . G Warning! When operating the rear window sunshade, be sure that there is no danger of anyone being harmed by the extending or retracting procedure. X Reverse the extending or [...]

COMAND automatic climate control 227 COMAND automatic climate control Introduction i The components and operating principles of COMAND can be found on ( Y page 82). G Warning! Follow the recommended settings for heating and cooling given on the following pages and pages in the “Controls in detail” chapter. Otherwise the windows could fog up, im[...]

COMAND automatic climate control 228 X Changing temperature: Slide q m r or rotate y m z . X Exiting menu: Press n , back button L in the center console ( Y page 83) or slide o m p . The setting is saved. Adjusting air distribution G Observe Safety notes, see page 397. You can adjust the air distribution separately for the driver’s and front pass[...]

COMAND automatic climate control 229 X Exiting menu: Press n , back button L in the center console ( Y page 83) or slide o m p . The setting is saved. Central climate control menu via COMAND The central climate control menu is in the center of the climate control settings. When the climate control is switched on, you will see AC in the central menu[...]

COMAND automatic climate control 230 Selecting Mono mode Mono is used to adjust the climate zones for the entire vehicle at the same time. When the Mono function is switched on and you change the climate on the driver’s side, these changes will be carried out in the same manner for all climate zones. X Select climate control settings £ Central c[...]

COMAND automatic climate control 231 R Focused (default setting, increased air flow) R Medium (reduced air flow) R Diffuse (minimal air flow) i When the interior ambient temperature of the vehicle is very hot and the climate control is cooling the interior, the setting for air flow is temporarily overridden. X Select climate control settings £ Cen[...]

COMAND automatic climate control 232 R switch back to operating the front climate control system R switch off the rear climate control R switch the automatic function of the rear climate control from automatic to manual X Select climate control settings £ Central climate control menu. Switching off rear climate control operation from the front X S[...]

COMAND seats 233 COMAND seats Operating seats via COMAND G Observe Safety notes, see page 309. i The components and operating principles of COMAND can be found on ( Y page 83). The following seat adjustments can be made via COMAND: Settings Lumbar support ( Y page 233) Multicontour seats, front ( Y page 234) Drive-dynamic multicontour seats, front [...]

COMAND seats 234 1 Scale 2 Cursor 3 Current seat 4 Current setting X Select seat ( Y page 233). X Adjusting lumbar support: Slide o m p or rotate y m z until desired setting is reached. X Confirming selection: Press n . X Switching to the bottom menu line: Slide o m p . X Confirming selection: Press n . i After you have pressed O , the seat last ad[...]

COMAND seats 235 X Select seat ( Y page 233). X Selecting Seatback Sides : Slide q m r or rotate y m z . X Confirming selection: Press n . A scale appears. X Slide q m r or rotate y m z until desired setting is reached. X Saving setting: Press n . Adjusting seat backrest curvature in lumbar area This function is used to adjust the air chambers in t[...]

COMAND seats 236 Drive-dynamic multicontour seats, front For information on manual multicontour seat settings, see “Multicontour seats, front” ( Y page 234). i If PRE-SAFE ® has been activated, the air pressure in the air chambers (sides of seat cushion and seat backrest) of the drive- dynamic multicontour seats is increased. The drive-dynamic[...]

Instrument cluster control system 237 Instrument cluster control system Introduction The control system is activated as soon as the starter switch is in position 2 ( Y page 307). The control system enables you to call up information about your vehicle and to change vehicle settings. For example, you can use the control system to find out when your [...]

Instrument cluster control system 238 5 Press button & ( to select menus Press button briefly $ % to select function or scroll through lists within Audio menu to select previous or next track, scene or stored station within Telephone menu to switch to the phone book and select a name or number Press and hold button $ % within Audio to select pr[...]

Instrument cluster control system 239 Settings, functions as well as any malfunctions appear in the text field. For more information on menus displayed in the multifunction display, see “Menus” ( Y page 240). Control systems Z[...]

Instrument cluster control system 240 Menus Control systems[...]

Instrument cluster control system 241 Function 1 Trip menu ( Y page 241) 2 Navi menu ( Y page 243) 3 Audio menu ( Y page 244) 4 AMG 7 menu ( Y page 245) 5 Telephone menu ( Y page 248) 6 Assistance menu ( Y page 250) 7 Service menu ( Y page 251) 8 Settings menu ( Y page 252) Trip menu In the Trip menu, you can show an additional display for the spee[...]

Instrument cluster control system 242 Fuel consumption statistics since last reset X Press ( or & to select the Trip menu. X Press % or $ to select From Reset . 1 Distance driven since last reset 2 Time elapsed since last reset 3 Average speed since last reset 4 Average fuel consumption since last reset Resetting values You can reset the values[...]

Instrument cluster control system 243 Navi menu The display in the Navi menu depends on whether route guidance is active or not. X Press ( or & to select the Navi menu. Route guidance not active The multifunction display shows the direction of travel and the name of the street you are currently driving on, if known by the navigation system. 1 D[...]

Instrument cluster control system 244 You have reached your destination. R Area of dest. reached You have arrived in the area of your destination. The message appears, for example, for relatively large POIs. R New Route... COMAND calculates a new route, e.g. because you have deviated from the calculated route or due to a detour report. Afterward, C[...]

Instrument cluster control system 245 X Select next or previous stored station: Press button % or $ briefly to select a stored station. X Select next or previous station in wave band: Press and hold button % or $ to select a station. You can only change the frequency band and save new stations using the COMAND system, see ( Y page 188) (AM/FM radio[...]

Instrument cluster control system 246 If the engine reaches the overspeed range in the manual shift program, you will see up next to gear indicator 1 as a reminder to upshift. Use buttons % or $ to select the following functions in the AMG menu: R RACETIMER ( Y page 246) R Overall analysis ( Y page 247) R Lap analysis ( Y page 247) RACETIMER G Warn[...]

Instrument cluster control system 247 1 Gear indicator 2 RACETIMER 3 Best lap time Resetting current lap X Press button æ while the timer is running. The timer stops. X Press button ç . The lap time is reset to “0”. Deleting all laps It is not possible to delete a single saved lap. X Press button æ while the timer is running. The timer stops[...]

Instrument cluster control system 248 1 Lap number 2 Lap time 3 Maximum speed during lap 4 Lap length 5 Average speed during lap X Press button % or $ to see other lap analyses. Telephone menu G Warning! A driver’s attention to the road must always be his/her primary focus when driving. For your safety and the safety of others, we recommend that [...]

Instrument cluster control system 249 X Switch on the telephone. R No telephone inserted : The telephone is not inserted in the mobile phone cradle. X Switch on the telephone. X Insert the telephone in the mobile phone cradle. R Please enter PIN or Enter unlock code : The telephone is inserted in the mobile phone cradle but the PIN or unlock code h[...]

Instrument cluster control system 250 X Press button s or # . If several entries are present for the same name, they are all shown. Select the desired entry and press button s or # again. The control system dials the selected phone number. If the connection is successful and this feature is supported by your network provider, the name of the party [...]

Instrument cluster control system 251 Switching on or off rear view camera automatically i The image from the rear view camera is shown on the COMAND system display. X Press ( or & to select the Assistance menu. X Press % or $ to select the Rearview Camera function X Press # . X Press # again if you would like to change the current status. The [...]

Instrument cluster control system 252 G Warning! Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed. The malfunction and warning messages are simply a reminder with respect to the operation of certain systems. They do not replace the owner’s and/or driver’s responsibility to maintain [...]

Instrument cluster control system 253 i Make sure the light switch is set to ¡ or * when you switch off the daytime running lamps while driving at night. Showing or hiding additional speedometer You can have an additional digital speedometer shown in the multifunction display. Depending on the setting for the speedometer display mode ( Y page 253)[...]

Voice Control introduction 254 i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device. Removal, tampering, or[...]

Voice Control introduction 255 signs, and should utilize the system’s audio cues while driving. The navigation system does not supply any information on stop signs, yield signs, traffic regulations or traffic safety rules. Their observance always remains in the driver’s personal responsibility. DVD maps do not cover all areas nor all routes wit[...]

Voice Control introduction 256 Spelling You may not need to spell the entire name (street, intersection, city or point of interest) especially if the name is lengthy. Spelling the first three to five characters of the name should be sufficient for the system to recognize the name provided it is available on the navigation DVD. The selection appeari[...]

Voice Control introduction 257 Item 1 ! Activating the Voice Control System Accepting a call 2 L Canceling Voice Control 3 æ Increasing volume ç Decreasing volume s Taking a call Dialing Redialing t Ending a call Rejecting an incoming call i The Voice Control System can be canceled at any time, even during a dialog. Please note that if the Voice [...]

Voice Control navigation 258 1 COMAND display Multifunction display For example, telephone numbers are shown in the multifunction display while dialing when the main Telephone menu is selected in the instrument cluster control system. 1 Multifunction display Symbols The following symbols are found in the Voice Control System pages: s This symbol st[...]

Voice Control navigation 259 R select one of your last destinations R enter a POI (point of interest) R select one of your last destinations R save a destination R navigate to a destination stored in the destination memory of the address book R start route guidance R display the map R zoom in or zoom out of the map R listen to the destination memor[...]

Voice Control navigation 260 u The system displays a numbered list of matching street names on the COMAND display t Please select a line number s Number two t Number two accepted t Do you want to enter a house number? s No t Do you want to enter an intersection? s No t Do you want to spell the town’s name? s Yes t Please spell the town name s N-E[...]

Voice Control navigation 261 s Yes t Starting route guidance i Depending on the number of categories and POI’s available for a given area, the system may display several lists on each of which you may have to make a selection by speaking the desired line number or you have to spell the name of a POI. “Next POI” With the commands R “Next gas[...]

Voice Control navigation 262 or R “Navigate <voice name> work” to directly select between home or work address for that name. The system confirms your selection, calculates the route, and begins route guidance. Sample dialog: s Navigate to John Smith If more than one address exists for this voice entry, the Voice Control System will promp[...]

Voice Control navigation 263 The system reads out the address book destination memory. To select a voice entry and adopt address for route guidance: X When the system reads the desired entry, press ! . If more than one address is available, the system will prompt you: t Navigate to home or work? s Home The system reads the selected voice entry and [...]

Voice Control navigation 264 COMAND display is sorted according to the probability of the voice recognition. Speak each character as clearly as you can, especially when they sound very similar (d or e). “District” or “Center” Use the command “District” or “Center” to to spell a city location in the city previously selected. Speak th[...]

Voice Control telephone 265 “House number” Use the command “House number” to select a house number for the street previously selected. Speak the house number in single digits. Sample dialog: s House number t Please say the house number in single digits s Three two t Is three two correct? s OK t House number accepted The house number is adop[...]

Voice Control telephone 266 Telephone commands For a complete list of commands, see ( Y page 277). “Telephone” Use the command “Telephone” to activate the telephone main menu. Use this command if you want the digits you are entering to appear on the COMAND display. “Help telephone” The Voice Control System features a comprehensive help [...]

Voice Control telephone 267 “Confirm” Using the command “Confirm” will repeat all digits spoken up to that point. Upon repeating the digits, the system will prompt you to continue your input. Sample dialog: s Dial number t Please say the number s One two three t One two three s Confirm t One two three, please continue s Four five six seven [...]

Voice Control telephone 268 or, with longer phone numbers, R in digit blocks (three to five digits in each block). After each digit block (separate the digit blocks by using an approximately 0.5 second pause), the Voice Control System repeats the recognized digits and waits until you continue speaking. After the command “OK”, you will be prompt[...]

Voice Control telephone 269 R “Call John Smith home car” R “Call John Smith home land line” R “Call John Smith work cell phone” R “Call John Smith work car” R “Call John Smith work land line” The system confirms your input and the number is dialed. Sample dialog: s Call John Smith If several telephone numbers exist for the same [...]

Voice Control address book 270 Voice Control address book Safety notes G Warning! Please devote your attention first and foremost to the traffic situation you are in. Before your journey, please familiarize yourself with the address book functions. Only use the Voice Control System when road and traffic conditions permit you to do so. Otherwise you[...]

Voice Control address book 271 Operating and using address book X Press ! . X Speak one of the following commands depending on the address book status (open or not open). Available commands with the address book not open For a complete list of commands, see ( Y page 277). “Help address book” Use the command “Help address book” to have the V[...]

Voice Control address book 272 deleted; the remaining data in the entry are retained. “Address book” Use this command to open the address book. Available commands with the address book open “Help address book” Use the command “Help address book” to have the Voice Control System read out an option list of all available commands for the a[...]

Voice Control radio 273 Voice Control radio Safety notes G Warning! Please devote your attention first and foremost to the traffic situation you are in. Before your journey, please familiarize yourself with the radio functions. Only use the Voice Control System when road and traffic conditions permit you to do so. Otherwise you could be involved in[...]

Voice Control radio 274 The Voice Control System tunes the radio to frequency FM 95.5. “Save station” (List saved stations) Use this command to save the set station (AM and FM only) by name in your personal station list. After using this command, the Voice Control System will prompt you to repeat the name two to four times before it is saved in[...]

Voice Control CD/DVD changer/MP3 275 Sample dialog: s Delete station t Which station do you want to delete? s Smooth Jazz t Do you want to delete Smooth Jazz? s Yes t Station deleted “Delete station list” Use this command to delete the complete station list or one or more stations from the station list. Sample dialog: s Delete station list t Do[...]

Voice Control CD/DVD changer/MP3 276 type of medium found in the selected slot. In your command, you can therefore replace the term “CD/DVD” with “Medium”. To operate the DVD changer using the Voice Control System, the Voice Control System must be activated ( Y page 257). Selecting CD mode X Press ! . X Speak one of the following commands: [...]

Voice Control command list 277 “Memory card” The “Memory card” command is used to switch from the DVD drive to the PCMCIA card. “Drive” The “Drive” command is used to switch from the PCMCIA card to the DVD drive. Voice Control command list Chapter “Command list” gives you on overview of all commands available for use to control [...]

Voice Control command list 278 R help R help please R please help R help functions R help devices R help voice control R linguatronic help R general help R help permanent commands R help global commands R letters of the English alphabet R digits 0 - 9 R continue R go forward R next page R back R go back R previous page R help radio R help tuner R r[...]

Voice Control command list 279 R save R save PIN R save PIN code R save number R save PIN number R save telephone number R save name R save password R store PIN R store PIN code R store number R store PIN number R store telephone number R store name R store password R dial R dial PIN R dial number R dial PIN number R dial PIN code R dial phone numb[...]

Voice Control command list 280 R correction R wrong PIN R wrong number R wrong PIN number R wrong PIN code R wrong phone number R wrong telephone number R wrong unlock code R incorrect PIN R incorrect number R incorrect PIN number R incorrect PIN code R incorrect phone number R incorrect telephone number R incorrect unlock code R delete R delete PI[...]

Voice Control command list 281 R enter country R enter another country R spell country R spell another country R change country R change another country R intersection R spell intersection R spell cross street R enter intersection R enter cross street R last destinations R last states R last provinces R spell town R spell city R spell name of town [...]

Voice Control command list 282 R start route guidance R start navigation R start nav R start routing R begin route guidance R begin navigation R begin route guidance R begin routing R continue route guidance R continue navigation R continue nav R continue routing R destination guidance on R cancel route guidance R cancel navigation R cancel nav R c[...]

Voice Control command list 283 Address book commands R address book (on) R address list (on) R addresses (on) R list address book R read out address book R get address book R recall address book R delete address book R spell entry R spell name R spell heading R search entry R search name R search heading R open entry R show entry R list entry R sel[...]

Voice Control command list 284 R land line R land line phone R land line telephone R cell phone R mobile phone R cellular phone R work car (phone) R office car (phone) R business car (phone) R company car (phone) R car (phone) work R car (phone) office R car (phone) business R car (phone) company R work land line R office phone R land line phone bu[...]

Voice Control command list 285 R accept R accept PIN R accept PIN code R accept lock code R accept PIN number R accept number R accept telephone number R accept name R accept password R OK R finished R <1> - <8> R use <1> - <8> R number <1> - <8> R line <1> - <8> Audio commands R audio R audio off Rad[...]

Voice Control command list 286 Example: 95.5 FM R ninety-five five R ninety-five five megahertz R ninety-five point five R ninety-five point five megahertz R frequency ninety-five five R frequency ninety-five point five R frequency ninety-five five megahertz R frequency ninety-five point five megahertz Example: 540 AM R five-hundred-forty R five-hu[...]

Voice Control command list 287 MP3 R MP3 (on) R MP3 player (on) R MP3 changer (on) R next MP3 R other MP3 R next medium R other medium R previous MP3 R last MP3 R preceding MP3 R replay MP3 R replay medium R repeat medium R last medium R previous medium R next directory R other directory R next folder R other folder R previous directory R previous [...]

Voice Control command list 288 R next DVD audio R other DVD audio R next audio DVD R other audio DVD R next medium R other medium R previous DVDA R last DVDA R preceding DVDA R replay DVDA R previous DVD audio R last DVD audio R preceding DVD audio R replay DVD audio R previous audio DVD R last audio DVD R preceding audio DVD R replay audio DVD R r[...]

Voice Control troubleshooting 289 R track 1-39 R load track 1-39 R load track number 1-39 R select track 1-39 R select track number 1-39 R DVDA 1-6 R DVDA number 1-6 R DVD audio 1-6 R DVD audio number 1-6 R audio DVD 1-6 R audio DVD number 1-6 R medium 1-6 R medium number 1-6 Voice Control troubleshooting Help function To support the user, the Voic[...]

Voice Control troubleshooting 290 Entering digits and spelling Entering digits R Digits from “Zero” to “Nine” may be used. R Speaking phone numbers in digit blocks of 3 to 5 digits has proven a very reliable method for the input of phone numbers. Spelling R The letters of the English alphabet and the digits 0 - 9 may be used. R Speak the le[...]

Voice Control troubleshooting 291 Problem Possible cause/consequence Suggested solution Should interference occur during the process of storing a name, the Voice Control System prompts you to repeat your voice entry a third and fourth time. If the interference continues, the dialog is stopped. Both voice entries differ. X Pronounce the voice entrie[...]

Voice Control troubleshooting 292 Problem Possible cause/consequence Suggested solution Voice Control System does not recognize a address book entry. The voice entries in the address book sound too similar. X When you create your address book entries, select names with the greatest possible acoustic differences: If for example you have the names Sm[...]

Voice Control individualization 293 Voice Control individualization i The individualization can only be performed when the vehicle is stationary. If you drive off, the individualization will be canceled. After starting the session, the system will guide you through the individualization by means of acoustic instructions. The individualization is us[...]

294[...]

295 Vehicle equipment ............................ 296 Locking and unlocking ..................... 296 Starter switch positions ................... 307 Seats .................................................. 309 Multifunction steering wheel .......... 319 Mirrors ............................................... 320 Memory function .................[...]

Locking and unlocking 296 Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Locking and unlocking Notes G Observe Safety notes, see page 62. Your[...]

Locking and unlocking 297 SmartKey Your vehicle comes supplied with two SmartKeys, each with remote control and a removable mechanical key. The SmartKey centrally locks and unlocks: R the doors R the trunk lid R the fuel filler flap 1 j Lock button 2 i Unlock button for trunk lid 3 k Unlock button 4 Battery check lamp i USA only: This device compli[...]

Locking and unlocking 298 KEYLESS-GO Vehicles equipped with KEYLESS-GO come with two SmartKeys with KEYLESS-GO, each with remote control and a removable mechanical key. The KEYLESS-GO function is integrated into the SmartKey. The validity of the SmartKey is checked every time you grasp an outside door handle. When the SmartKey is valid, your vehicl[...]

Locking and unlocking 299 message Key Not Detected appears in the multifunction display - with the engine running, the message Key Not Detected appears in the multifunction display while driving off Find the SmartKey or change its present location immediately (e.g. place it on the front passenger seat or insert it in shirt pocket). R If you have st[...]

Locking and unlocking 300 X Unlocking driver’s door and fuel filler flap: Pull the driver’s outside door handle. X Global unlocking: Pull any outside door handle other than the driver’s outside door handle. X Global locking: Touch outside of door handle 1 . Checking SmartKey batteries X Press button j or k on the SmartKey. Battery check lamp [...]

Locking and unlocking 301 X Front doors: Pull on inside door handle 2 on the respective front door to open door. If the door was locked, locking knob 1 will move up. X Rear doors: Pull up locking knob on the respective rear door to unlock door. X Pull on inside door handle on the respective rear door to open door. Automatic central locking The door[...]

Locking and unlocking 302 Opening the trunk G Warning! Make sure the trunk is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death. You can open the trunk when the vehicle is stationary. A minimum height clearance of 5.90 ft (1.8[...]

Locking and unlocking 303 Vehicles with trunk opening/closing system 1 Remote trunk opening/closing switch X Press and hold switch 1 until the trunk begins to open. X To interrupt the opening procedure: Press switch 1 . Trunk opening-height restriction Vehicles with trunk opening/closing system: The trunk lid opening height can be limited when tran[...]

Locking and unlocking 304 The power closing assist automatically ensures that the trunk lid is pulled completely close ( Y page 307). Closing the trunk from the inside automatically G Warning! Maintain sight of the area around the rear of the vehicle while operating the trunk lid with the door mounted switch. Monitor the closing procedure carefully[...]

Locking and unlocking 305 result in an accident and/or serious personal injury. In vehicles with trunk opening/closing system you can close the trunk separately from the outside using the trunk closing switch. Vehicles without KEYLESS-GO 1 Trunk closing switch Vehicles with KEYLESS-GO 1 Trunk closing switch X Press switch 1 briefly. If the trunk li[...]

Locking and unlocking 306 been piled too high) in the upper motion sequence, the closing procedure is stopped and the trunk lid reopens slightly. Trunk lid emergency release With the emergency release button, the trunk lid can be opened from inside the trunk. 1 Emergency release button X Briefly press emergency release button 1 . The trunk lid unlo[...]

Starter switch positions 307 X Canceling: Insert the mechanical key in the trunk lid lock. X Turn the mechanical key counterclockwise to neutral position $ and remove the mechanical key in that position to unlock the trunk. You can now open the trunk. Power closing assist for doors and trunk lid It is not necessary to slam the door or trunk lid clo[...]

Starter switch positions 308 have it checked and replaced if necessary. If a lamp in the instrument cluster remains on after starting the engine or comes on while driving, refer to “Lamps in instrument cluster” ( Y page 548). ! If the SmartKey cannot be turned in the starter switch, the vehicle battery may not be sufficiently charged. R Check t[...]

Seats 309 X Make sure the automatic transmission is in park position P . X Do not depress the brake pedal. KEYLESS-GO start/stop button = USA only ? Canada only Position 0 Before you press the KEYLESS-GO start/stop button, the vehicle’s on-board electronics have status 0 (as with SmartKey removed). Position 1 X Press the KEYLESS-GO start/stop but[...]

Seats 310 G Warning! Your seat must be adjusted so that you can correctly fasten your seat belt. Observe the following points: R Adjust the seat backrest until your arms are slightly angled when holding the steering wheel. R Adjust the seat to a comfortable seating position that still allows you to reach the accelerator/brake pedal safely. The posi[...]

Seats 311 Power seats Front power seats 1 Head restraint height 2 Seat height 3 Seat cushion tilt 4 Seat cushion depth 5 Seat fore and aft adjustment 6 Seat backrest tilt i If PRE-SAFE ® has been activated, the front passenger’s seat and/or electrically adjustable rear seats will be moved to a more favorable seat position. i The memory function [...]

Seats 312 from the front passenger front air bag as possible. Otherwise, the passenger could be seriously or even fatally injured in the event of an accident or braking maneuver. Make sure no one is caught or injured while the seat is being adjusted. Even with the SmartKey or SmartKey with KEYLESS-GO removed from the starter switch or the SmartKey [...]

Seats 313 passenger compartment with the override switch ( Y page 67). Head restraint fore and aft adjustment 1 Adjusting head restraint X Adjust the head restraint to the desired position by pushing or pulling on the upper edge of the head restraint cushion. Comfort head restraint G Warning! When folding back the side cushions, never reach between[...]

Seats 314 ! Do not activate the easy-entry/exit feature if the seat backrest is in an excessively reclined position. Doing so could cause damage to front or rear seats. First move the seat backrest to an upright position. With the easy-entry/exit feature activated, the steering wheel and driver’s seat will return to their last set memory position[...]

Seats 315 center of the head restraint supports the back of the head at eye level. This will reduce the potential for injury to the head and neck in the event of an accident or similar situation. With a rear seat occupied, make sure to move the respective head restraint up from the lowest non-use position and have the occupant adjust the head restr[...]

Seats 316 X Switch on the ignition. X Press and hold switch 1 ( Y page 315) in the front center console. The rear seat head restraints will fold up. X Pull the rear center seat head restraint upright manually until it locks into position. Power rear seat head restraints (rear outer seats) 1 Placing upright head restraint 2 Head restraint tilt 3 Fol[...]

Seats 317 Seat ventilation 1 Seat ventilation button The blue indicator lamps in the button come on to show which ventilation level you have selected. i The seat ventilation for the driver’s seat can be activated using summer opening feature ( Y page 336). X Switch on the ignition. X Switching on: Press button 1 repeatedly until the desired venti[...]

Seats 318 1 To select right rear passenger seat 2 Massage setting, gentle 3 Massage setting, vigorous 4 To adjust position of seat backrest curvature (lordosis) 5 Lumbar region support 6 Side bolster adjustment 7 To select left rear passenger seat X Selecting a seat: Press rocker switch 1 or 7 forward or backward. The indicator lamp in the selected[...]

Multifunction steering wheel 319 Multifunction steering wheel Safety notes G Warning! Do not adjust the steering wheel while driving. Adjusting the steering wheel while driving could cause the driver to lose control of the vehicle. The electrical steering wheel adjustment feature can be operated at any time. Therefore, do not leave children unatten[...]

Mirrors 320 i Indicator lamp 3 flashes or goes out in case of power surge or undervoltage or if the steering wheel heating malfunctions. i The steering wheel heating switches off automatically: R when you remove the SmartKey from the starter switch R on vehicles with KEYLESS-GO, when you switch off the ignition and open the driver’s door R when t[...]

Mirrors 321 When you press button 1 for the first time, the exterior mirror on the driver’s side is always selected. If you do not make adjustments to the selected exterior rear view mirror within 15 seconds, the indicator lamp goes out. You will then have to select the desired exterior rear view mirror again before adjustments can be made. Adjus[...]

Mirrors 322 1 Button for folding exterior rear view mirrors in and out X Folding in: Briefly press button 1 . Both exterior rear view mirrors fold in. X Folding out: Briefly press button 1 . Both exterior rear view mirrors fold out. ! If an exterior rear view mirror housing is forcibly pushed forward (hit from the rear), reposition it manually by a[...]

Memory function 323 R immediately once your vehicle exceeds a speed of approximately 6 mph (10 km/h) R immediately when you press button 1 for driver’s side exterior rear view mirror. i If you adjust the exterior mirrors while they are in the parking position, the new mirror position is stored as a new parking position. Memory function Notes With[...]

Memory function 324 Storing positions into memory X Adjust the seats. X On the driver’s side, additionally adjust the steering wheel and exterior rear view mirrors to the desired positions. X Press memory button M . X Release memory button M and press memory position button 1 , 2 or 3 within 3 seconds. When the settings are stored to the selected[...]

Lighting 325 Lighting Notes i If you drive in countries where vehicles drive on the other side of the road than the country where the vehicle is registered, you must have the headlamps modified for symmetrical low beams. Relevant information can be obtained at any authorized Mercedes-Benz Center. i The active Bi-Xenon headlamps monitor the vehicle?[...]

Lighting 326 R License plate lamps R Side marker lamps R Instrument panel lamps R Green indicator lamp C in the exterior lamp switch X Switching off: Turn the exterior lamp switch to position M . Automatic headlamp mode The following lamps come on and go out automatically depending on the brightness of the ambient light: R Low-beam headlamps R Tail[...]

Lighting 327 Canada only With the exterior lamp switch in position M or * , you cannot switch on the high- beam headlamps. The high-beam flasher is available at all times. For nighttime driving turn the exterior lamp switch to position B to permit activation of the high-beam headlamps. When the engine is running, and you R shift from a driving posi[...]

Lighting 328 Combination switch 1 High beam 2 High-beam flasher High beam X Turn the exterior lamp switch to position B ( Y page 325). X Switching on: Push the combination switch in direction of arrow 1 . The high-beam headlamp indicator lamp A in the instrument cluster comes on. X Switching off: Pull the combination switch in direction of arrow 2 [...]

Lighting 329 X Switching on: Press hazard warning flasher switch 1 . All turn signal lamps are flashing. i With the hazard warning flasher activated and the combination switch set for either left or right turn, only the respective left or right turn signals will operate when the ignition is switched on. X Switching off: Press hazard warning flasher[...]

Lighting 330 you have turned the steering wheel to full lock. Switching off X Switch off the left or right turn signal. or X Steer straight ahead. The corner-illuminating lamp goes out. i There may be a brief delay before the corner-illuminating lamps go out. Interior lighting in the front i Even with the SmartKey being removed from the starter swi[...]

Wipers 331 Emergency lighting The interior lighting is activated automatically if the vehicle is involved in an accident. X Switching off: Press hazard warning flasher switch ( Y page 328). or X Press switch ] . or X Unlock the vehicle. Interior lighting in the rear ! An interior lamp switched on manually does not go out automatically. Leaving an i[...]

Wipers 332 Combination switch 1 Switching on windshield wipers 2 Single wipe Wiping with washer fluid X Switch on the ignition. Windshield wipers Switching on/off M Windshield wipers off U Slow intermittent wiping Rain sensor operation with low sensitivity. V Fast intermittent wiping Rain sensor operation with high sensitivity. u Slow continuous wi[...]

Wipers 333 Intermittent wiping will be continued when all doors are closed and R the automatic transmission is in drive position D or reverse gear R or R the wiper setting is changed using the combination switch Single wipe X Press the combination switch briefly in direction of arrow 2 to the resistance point. The windshield wipers wipe one time wi[...]

Power windows 334 Power windows Opening and closing The door windows are opened and closed electrically. The switches for all door windows are located on the driver’s door control panel. The switches for the respective door windows are located on the front passenger door and on the rear doors. i Operating the rear door windows from the rear is no[...]

Power windows 335 X Switch on the ignition. X Opening/Closing: Press or pull and hold switch 1 to 4 to the resistance point. The corresponding door window will move downwards or upwards until you release the switch. X Express operation: Press or pull switch 1 to 4 past the resistance point and release. The corresponding door window opens or closes [...]

Power windows 336 Synchronizing door windows The door windows must be synchronized if they cannot be fully closed (express operation). Each door window must be synchronized separately. X Close all doors. X Switch on the ignition. X Pull and hold switch 1 , 2 , 3 or 4 ( Y page 334) until the respective door window is closed. The door window opens ag[...]

Power windows 337 Convenience closing feature When locking the vehicle, you can simultaneously close R the door windows R the tilt/sliding sunroof R the panorama roof Afterward, you can extend the roller sunblinds of the panorama roof and the rear door window sunshades. G Warning! When closing the door windows and the tilt/sliding sunroof or panora[...]

Driving and parking 338 X Touch and hold sensor surface 1 on an outside door handle until the door windows and the tilt/sliding sunroof or panorama roof are completely closed. i Make sure you are only touching the sensor surface. X Release the sensor surface to interrupt the closing procedure. X Vehicles with panorama roof and/or rear door window s[...]

Driving and parking 339 Automatic transmission Gearshift pattern for automatic transmission 1 Button for selecting park position P Á Park position  Reverse gear À Neutral position ¿ Drive position For more information on how to operate the gear selector lever, see “Automatic transmission” ( Y page 345). X Make sure the automatic transmissi[...]

Driving and parking 340 X Press the KEYLESS-GO start/stop button once. The engine starts automatically. Starting difficulties ! Remember that extended starting attempts can drain the battery. The engine does not start. You can hear the starter. There could be a malfunction in the engine electronics or in the fuel supply system. Carry out the follow[...]

Driving and parking 341 ! You have forgotten to release the electronic parking brake when driving off if R an acoustic warning sounds R the message Please Release Parking Brake appears in the multifunction display R the red indicator lamp for the electronic parking brake 0 (USA only) or ! (Canada only) in the instrument cluster flashes Release the [...]

Driving and parking 342 Problems while driving The engine runs erratically and misfires R An ignition cable may be damaged. R The engine electronics may not be operating properly. R Unburned gasoline may have entered the catalytic converter and damaged it. X Give very little gas. X Have the problem checked at an authorized Mercedes-Benz Center as s[...]

Driving and parking 343 from the starter switch, or press the KEYLESS-GO start/stop button. R Take the SmartKey with you and lock the vehicle when leaving. Electronic parking brake G Warning! When leaving the vehicle, always remove the SmartKey from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the [...]

Driving and parking 344 Engaging electronic parking brake automatically Your vehicle’s electronic parking brake engages automatically when DISTRONIC Plus ( Y page 360) brings your vehicle to a standstill, and at least one of the following conditions is met: R The engine is turned off. R The driver’s door is opened and the seat belt is not inser[...]

Automatic transmission 345 X Remove the SmartKey from the starter switch. The immobilizer is activated. If you turn off the engine using the SmartKey, and remove the SmartKey from the starter switch or open a front door, the automatic transmission will shift into park position P automatically. G Warning! Keep in mind that turning off the engine alo[...]

Automatic transmission 346 covered by the Mercedes-Benz Limited Warranty. i During the brief warm-up, transmission upshifting is delayed. This allows the catalytic converter to heat up more quickly to operating temperature. Gear selector lever Gearshift pattern for automatic transmission 1 Button for selecting park position P Á Park position  Re[...]

Automatic transmission 347 open a front door, the automatic transmission will shift into park position P automatically. G Warning! Keep in mind that turning off the engine alone only will shift the automatic transmission into neutral position N automatically. Always shift the automatic transmission into park position P before turning off the engine[...]

Automatic transmission 348 With KEYLESS-GO: X Make sure the ignition is switched on. X With the vehicle at a standstill, depress the brake pedal and keep it pressed. X Shift the automatic transmission into park position P . X Release the brake pedal. X Remove the KEYLESS-GO start/stop button from the starter switch. X Insert the SmartKey into the s[...]

Automatic transmission 349 Effect ì Park position Shift the automatic transmission into park position P only when the vehicle is stopped. The park position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always engage the electronic parking brake in addition to shifting the automatic transmission into park[...]

Automatic transmission 350 (9 km/h). To shift the automatic transmission directly between drive position D and reverse gear R , move the gear selector lever past the resistance point up or down. Working on the vehicle G Warning! When working on the vehicle, engage the electronic parking brake and shift the automatic transmission into park position [...]

Automatic transmission 351 Program mode selector switch C Comfort For comfort driving S Sport For standard driving Program mode selector switch on AMG vehicles C Comfort For standard driving S Sport For sporty driving M Manual For manual gearshifting ( Y page 352) The current program mode appears in the multifunction display. 1 Program mode indicat[...]

Automatic transmission 352 Steering wheel gearshift control (example illustration) 1 Limiting gear range Downshift (in manual program mode M ) 2 Extending gear range Upshift (in manual program mode M ) i You cannot shift with the steering wheel gearshift control when the automatic transmission is in park position P , neutral position N , or reverse[...]

Automatic transmission 353 Program mode selector switch C Comfort For standard driving S Sport For sporty driving M Manual For manual gearshifting The current program mode appears in the multifunction display ( Y page 351). For information on automatic program mode ( C or S ), see “Automatic shift program” ( Y page 350) and “One-touch gearshi[...]

Automatic transmission 354 X Shift the automatic transmission from current gear 1 into the next higher gear. The fuel supply will otherwise be interrupted to prevent the engine from overrevving. Downshifting G Warning! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced veh[...]

Instrument cluster 355 Instrument cluster Introduction For a full view illustration of the instrument cluster, see “Instrument cluster” ( Y page 30). G Warning! No messages will be displayed if either the instrument cluster or the multifunction display is inoperative. As a result, you will not be able to see information about your driving condi[...]

Driving systems 356 ! Excessive coolant temperature triggers a warning in the multifunction display. The engine should not be operated with a coolant temperature above 248 ‡ (120†), i.e. in the red zone of the coolant temperature gauge. Doing so may cause serious engine damage which is not covered by the Mercedes-Benz Limited Warranty. Tachomet[...]

Driving systems 357 Cruise control The cruise control automatically maintains the speed you set for your vehicle. The use of the cruise control is recommended for driving at a constant speed for extended periods of time. The currently set speed or last set speed (“Resume” function) appears in the multifunction display for approximately 5 second[...]

Driving systems 358 R when the automatic transmission is in park position P , reverse gear R , or neutral position N R the ESP ® is switched off or has switched off due to a malfunction The vehicle speed displayed in the speedometer can briefly vary from the speed setting for the cruise control system. Setting current speed X Accelerate or deceler[...]

Driving systems 359 Adjustment in 1 mph (Canada: 1 km/h) increments i The set speed value is increased or decreased in 1 mph (Canada: 1 km/h) increments each time you lift or press the cruise control lever up or down to the resistance point. X Briefly lift the cruise control lever up to the resistance point in direction of arrow 1 to increase or pr[...]

Driving systems 360 R with the electronic parking brake engaged R if the ESP ® has switched off due to a malfunction DISTRONIC Plus Safety notes When activated, the DISTRONIC Plus adaptive cruise control system increases the driving convenience afforded by the cruise control while traveling on expressways and other major roadways. R If the DISTRON[...]

Driving systems 361 changes in tire traction can result in wheel spin and loss of control. The DISTRONIC Plus does not function in adverse sight and distance conditions. Do not use the DISTRONIC Plus during conditions of fog, heavy rain, snow or sleet. G Warning! The DISTRONIC Plus cannot take weather conditions into account. Switch off the DISTRON[...]

Driving systems 362 system, the following functions are deactivated: R DISTRONIC Plus R BAS Plus ( Y page 70) R PRE-SAFE ® Brake( Y page 76) R Park Assist ( Y page 379) R Advanced Parking Guidance ( Y page 383) R Blind Spot Assist ( Y page 392) i Due to its radar-emitting nature DISTRONIC Plus may have an appearance similar to a radar detector to [...]

Driving systems 363 lamp l in the instrument cluster comes on and an intermittent warning sounds. X Immediately apply the brake to avoid a collision. Under no circumstances should the driver await the intermittent warning sound before braking. See the following warning note. The intermittent warning sound ceases and the distance warning lamp l goes[...]

Driving systems 364 X Press ( or & to select the Assistance menu. X Press % or $ to select the Distance Display function. X Press # . The DISTRONIC Plus distance graphic appears and you will see one of the following displays in the multifunction display. DISTRONIC Plus activated When the DISTRONIC Plus is activated, you will see the set speed i[...]

Driving systems 365 DISTRONIC Plus lever 1 Setting current or higher speed 2 Setting current or lower speed 3 Deactivating the DISTRONIC Plus 4 Activating the DISTRONIC Plus or resuming to the last set speed 5 Setting target distance Activating DISTRONIC Plus G Warning! When the DISTRONIC Plus is braking, the brake pedal is retracted (i.e. depresse[...]

Driving systems 366 R if the driver’s door is open and the driver has not fastened his or her seat belt R if the radar sensors are switched off ( Y page 253) Switching on while driving X Tap the DISTRONIC Plus lever up 1 or down 2 until desired speed is set. The DISTRONIC Plus is switched on. or X Pull the DISTRONIC Plus lever briefly in directio[...]

Driving systems 367 brakes the vehicle in order to keep the distance specified by you. When the DISTRONIC Plus detects that the preceding vehicle is driving faster, it accelerates the vehicle up to the set speed. G Warning! When you step on the brake pedal, you switch off the DISTRONIC Plus except when the vehicle is at a standstill. The DISTRONIC [...]

Driving systems 368 speed will then be determined only by the accelerator pedal position. Setting a higher speed G Warning! Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden [...]

Driving systems 369 Adjustment in 5 mph (Canada: 10 km/h) increments X Briefly press the DISTRONIC Plus lever down past the resistance point in direction of arrow 2 ( Y page 365). X Release the DISTRONIC Plus lever. The vehicle set speed decreases in increments of 5 mph (Canada: 10 km/h) each time you press the DISTRONIC Plus lever down past the re[...]

Driving systems 370 reduce vehicle speed further or bring it to a stop. Depressing the accelerator pedal does not deactivate the DISTRONIC Plus. After a brief acceleration (e.g. for passing), the DISTRONIC Plus will resume the last set speed. Setting the following distance in DISTRONIC Plus You can set the specified following distance for the DISTR[...]

Driving systems 371 The DISTRONIC Plus regulates only the distance between your vehicle and those directly ahead of it. It may not register stationary objects in the road, e.g.: R a stopped vehicle in a traffic jam R a disabled vehicle R an oncoming vehicle The driver must always be alert, observe all traffic and intercede as required by means of s[...]

Driving systems 372 The DISTRONIC Plus has not yet detected the vehicle changing lanes. There will be insufficient distance to the lane-changing vehicle. Narrow vehicles Because of their narrow profile, the vehicles traveling near the outer edges of the lane have not yet been detected by the DISTRONIC Plus. There will be insufficient distance to th[...]

Driving systems 373 AIRMATIC Introduction The AIRMATIC consists of two components. The Adaptive Damping System (ADS) ( Y page 373) and the vehicle level control ( Y page 373). Adaptive Damping System (ADS) The fine tuning of the damping is dependent on: R road surface conditions R your driving style R vehicle loading R your personal settings The pr[...]

Driving systems 374 X Start the engine. X Briefly press switch 1 to change from one level setting to the other. The message: Vehicle Rising appears in the multifunction display when changing from normal level to raised level. Indicator lamp 2 is then lit. The message disappears when the vehicle is raised. X Press switch 1 again to lower the vehicle[...]

Driving systems 375 The following vehicle level settings can be selected when the vehicle is stationary: Level Normal For driving on normal roads. The indicator lamp is off. Raised For driving on rough roads or with snow chains. The indicator lamp is on. Select the “Raised” level setting only when required by current driving conditions. Otherwi[...]

Driving systems 376 All-wheel drive (4MATIC) Your vehicle is equipped with all-wheel drive (4MATIC). Both, the front and rear axles, are powered at all times when the vehicle is being operated. The 4MATIC improves traction in conjunction with the ESP ® ( Y page 73) and the Electronic Traction System (ETS/4-ETS) ( Y page 74). G Warning! If a drive [...]

Driving systems 377 1 Sensors in the front bumper (Only visible without DISTRONIC Plus) To function properly, the sensors must be free of dirt, ice, snow and slush. Clean the sensors regularly, being careful not to scratch or damage the sensors, see “Cleaning the Parktronic system sensors” ( Y page 486). G Warning! The Parktronic is a supplemen[...]

Driving systems 378 Rear sensors Center approx. 48 in (120 cm) Corners approx. 32 in (80 cm) Minimum distance Center approx. 8 in (20 cm) Corners approx. 6 in (15 cm) If the Parktronic system detects an obstacle in this range, all the distance warning segments illuminate and you hear a warning signal. If the obstacle is closer than the minimum dist[...]

Driving systems 379 when the automatic transmission is shifted into park position P . R Rear area: An intermittent acoustic warning will sound as the first red distance segment illuminates and a constant acoustic warning lasting a maximum of 2 seconds will sound for the second red distance segment. The signal is canceled when the automatic transmis[...]

Driving systems 380 objects may not be detected by the system and can damage the vehicle. i USA only: This device has been approved by the FCC as a “Vehicular Radar System”. The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the[...]

Driving systems 381 you secure the vehicle in place with the electronic parking brake. The Park Assist monitors the surroundings of your vehicle with four sensors in the front bumper and two sensors in the rear bumper. Range of the sensors The sensors of the Park Assist system are integrated in the front and rear bumpers. Make sure that the bumpers[...]

Driving systems 382 If yellow readiness indicators 3 under the distance segments are lit, the Park Assist is ready to measure. The current transmission position determines which warning indicators will be activated. Current transmission position Warning indicator D Front area activated R Front and rear area activated N With the electronic parking b[...]

Driving systems 383 1 Park Assist button 2 Indicator lamp X Switching off: Press button 1 . Indicator lamp 2 comes on. X Switching on: Press button 1 again. Indicator lamp 2 goes out. The Park Assist system is automatically switched on when the ignition and radar sensors ( Y page 253) are switched on. Advanced Parking Guidance G Warning! The Advanc[...]

Driving systems 384 i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device. Removal, tampering, or altering o[...]

Driving systems 385 a vehicle speed of up to 25 mph (40 km/h) and automatically scans for and measures potential parking spaces on both sides of the vehicle. At a vehicle speed of below 10 mph (16 km/h), you see the white parking space symbol as a system display in the instrument cluster. As soon as the Advanced Parking Guidance has detected a suit[...]

Driving systems 386 the blue parking space symbol in the instrument cluster. X Shift the automatic transmission into reverse gear R . The message Check Surroundings Press ’OK’ to Confirm appears in the multifunction display. X Press # on the multifunction steering wheel to confirm. The display in the instrument cluster changes to the Advanced P[...]

Driving systems 387 Countersteering 1 Red lane indicates the current steering wheel position 2 Yellow lane indicates the required steering wheel position X When the vehicle is stationary, turn the steering wheel until red lane 1 matches up with yellow lane 2 . Lane 2 then turns green and a white arrow and a white bracket are shown to indicate the t[...]

Driving systems 388 The Advanced Parking Guidance is automatically canceled if guidance into the parking space is no longer possible or if an error occurs. The parking space symbol disappears and the message Parking Guidance Canceled appears in the multifunction display. Rear view camera The rear view camera is an electronic and visual parking aid.[...]

Driving systems 389 maneuvering the vehicle. This applies not only to the area behind the vehicle, but also to the area in front of and to the sides of the vehicle. Failure to do so could result in injury to persons and/or damage to the vehicle or other property. We also recommend that the driver uses the Parktronic system, Park Assist, or Advanced[...]

Driving systems 390 object extends above the ground beyond the object’s contours directly touching the ground) and no objects that do not touch the ground, such as the bumper of a vehicle parked behind you, a trailer hitch, or the back of a truck are in the path, do not approach the object on the ground any closer than the red guide line. 1 Blue [...]

Driving systems 391 The camera is at the top of the windshield. 1 Night View Assist camera Switching on or off You can only switch on the Night View Assist if R the SmartKey in the starter switch is set to position 2 R it is dark R the light switch is set to * or B or if the daytime driving lamps are switched on R the automatic transmission is not [...]

Driving systems 392 Adjusting instrument cluster illumination 1 Knob X Make sure the Night View Assist is switched on. X Brightening illumination: Turn knob 1 clockwise. X Dimming illumination: Turn knob 1 counterclockwise. Dirty or fogged-up windshield If the windshield in front of the camera is fogged up on the inside or outside or if it is dirty[...]

Driving systems 393 Blind Spot Assist cannot detect road, traffic and weather conditions. It is the driver’s responsibility at all times to be attentive to road, weather and traffic conditions and to provide the steering, braking and other driving inputs necessary to retain control of the vehicle. Failure to do so could result in recognizing dang[...]

Driving systems 394 It is the driver’s responsibility at all times to be attentive to road, weather and traffic conditions and to provide the steering, braking and other driving inputs necessary to retain control of the vehicle. Failure to do so could result in recognizing dangers too late, possibly resulting in an accident and serious injury to [...]

Climate control system 395 G Warning! Do not change lanes or make turns, while red warning lamp 1 is flashing. Doing so could result in an accident and seroius injury to yourself and others. X Remain on the lane that you are currently on until traffic conditions permit to change. If the turn signal remains on, red warning lamp 1 will flash to indic[...]

Climate control system 396 Function Recommendation/Notes 1 U Air distribution and air volume, driver’s side (automatic mode) i Switches on the automatic mode. The indicator lamp in button U comes on. ( Y page 399) 2 ® Temperature control, driver’s side i Set the temperature to 72‡ (22†). ( Y page 400) 3 Q Manual fan speed adjustment, drive[...]

Climate control system 397 Rear climate control 1 Temperature control, left 2 Air distribution, left 3 Air volume 4 OFF Rear climate control on/off AUTO Rear climate control automatic mode MAN Rear climate control manual mode 5 Air distribution, right 6 Temperature control, right Notes on climate control system i If you have the air distribution an[...]

Climate control system 398 The following climate control functions can be operated via COMAND: R Temperature ( Y page 227) R Air distribution ( Y page 228) R Air volume ( Y page 228) R Switching off cooling ( + ) ( Y page 229) R Central climate control ( Mono ) ( Y page 230) R Footwell temperature ( Y page 230) R Air flow from air vents ( Y page 23[...]

Climate control system 399 Air conditioning The air conditioning is operational while the engine is running and cools the interior air to the temperature set by the operator. In addition, the air conditioning dehumidifies the interior air and helps prevent window fogging. G Warning! If you switch off the cooling function, the vehicle will not be co[...]

Climate control system 400 or X Adjust air distribution ( Y page 228). or X Adjust air volume ( Y page 228). The indicator lamp in rocker switch U goes out. Automatic control of air volume and air distribution is switched off. You can adjust the air distribution ( Y page 228) or air volume ( Y page 228) manually. i To return to the standard display[...]

Climate control system 401 Adjusting air vents G Warning! When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This may cause burns or frostbite to unprotected skin in the immediate area of the air vents. Always keep sufficient distan[...]

Climate control system 402 ! Extreme temperatures can occur in the storage compartment. Switch off the air vents in the storage compartment while the heating is switched on if you are transporting heat-sensitive items in the compartment. Keep the air vents free of obstruction. 1 Switching ventilation off 2 Switching ventilation on The air volume is[...]

Climate control system 403 Adjusting air distribution Air distribution in front/rear passenger compartment via COMAND The air distribution can be adjusted via COMAND ( Y page 228). Air distribution in rear passenger compartment with rear climate control panel X Press rocker switches 2 or 5 ( Y page 397) up or down until the desired symbol appears i[...]

Climate control system 404 The indicator lamp in rocker switch y goes out. or X Press rocker switches ® 2 and a ( Y page 395) up or down. Heating switches to the temperature that was set before the front defroster was switched on. The indicator lamp in rocker switch y goes out. i The air conditioning compressor remains on even with the indicator l[...]

Climate control system 405 A quantity of outside air is added when the cooling demand is not at maximum. If the air conditioning has been turned off or the outside temperature is below 41‡ (5†), the air recirculation mode will not switch on automatically. X Deactivating: Press rocker switch , up or down. The indicator lamp in the rocker switch [...]

Power tilt/sliding sunroof 406 Rear window defroster G Warning! Any accumulation of snow and ice should be removed from the rear window before driving. Visibility could otherwise be impaired, endangering you and others. The rear window defroster uses a large amount of power. To keep the battery drain to a minimum, switch off the defroster as soon a[...]

Power tilt/sliding sunroof 407 G Observe Safety notes, see page 62. G Warning! The tilt/sliding sunroof is made out of glass. In the event of an accident, the glass may shatter. This may result in an opening in the roof. In a vehicle rollover, occupants not wearing their seat belts or not wearing them properly may be thrown out of the opening. Such[...]

Power tilt/sliding sunroof 408 sunroof switch past the resistance point in direction of arrow 2 and release. X Stopping during express operation: Move the sunroof switch in any direction. i Express opening is not available when the tilt/sliding sunroof is raised. The tilt/ sliding sunroof must be closed first. i When the tilt/sliding sunroof is ope[...]

Panorama roof with power tilt/sliding panel 409 Synchronizing The tilt/sliding sunroof must be synchronized after a malfunction or if it does not open smoothly. ! If the tilt/sliding sunroof cannot be closed or synchronized, contact an authorized Mercedes-Benz Center or call Roadside Assistance. X Switch on the ignition. X Press and hold the sunroo[...]

Panorama roof with power tilt/sliding panel 410 Operating rear roller sunblind from front G Warning! When extending the rear roller sunblind, make sure no one is in danger of being injured by the extending procedure. The rear roller sunblind is equipped with the express operation and automatic reversal function. If the movement of the rear roller s[...]

Panorama roof with power tilt/sliding panel 411 Opening and closing the panorama roof with power tilt/sliding panel G Warning! When opening or closing the tilt/sliding panel, make sure there is no danger of anyone being harmed by the opening/ closing procedure. The tilt/sliding panel is equipped with the express operation and automatic reversal fun[...]

Panorama roof with power tilt/sliding panel 412 X Switch on the ignition. Opening X Opening manually: Press and hold the roof panel switch to the resistance point in direction of arrow 2 . X Release the roof panel switch when the desired position is reached. X Express operation: To open the tilt/ sliding panel completely, press the roof panel switc[...]

Panorama roof with power tilt/sliding panel 413 G Warning! Pulling and holding the roof panel switch to close the tilt/sliding panel immediately after it had been blocked two times will cause the tilt/sliding panel to close without any reversal function for as long as you hold the roof panel switch. Synchronizing The tilt/sliding panel and front ro[...]

Loading and storing 414 Loading and storing Loading instructions G Warning! Always fasten items being carried as securely as possible using cargo tie-down hooks and fastening materials appropriate for the weight and size of the load. In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle and ca[...]

Loading and storing 415 1 Trim cover X Flip trim covers 1 open. X Only attach the roof rack to the anchorage points under trim covers 1 . X Observe manufacturer’s instructions for installation. Parcel nets G Warning! The parcel net is intended for storing light- weight items only, such as road maps, mail, etc. Heavy objects, objects with sharp ed[...]

Loading and storing 416 Glove box 1 Glove box lid release 2 Glove box lid X Opening: Press glove box lid release 1 . X Closing: Push glove box lid 2 up until it engages. Locking and unlocking the glove box separately You can lock the glove box separately, e.g. when the vehicle is in the shop for service. The glove box can only be locked or unlocked[...]

Loading and storing 417 Seat storage compartments Storage compartments are located in the seat base of each front seat. 1 Handle 2 Storage compartment lid X Opening: Pull handle 1 up. X Fold storage compartment lid 2 forward. Storage bags G Warning! Do not place objects with a combined weight of more than 4.4 lb (2 kg) into the storage bag. Otherwi[...]

Loading and storing 418 Vehicles with control panel in rear armrest 1 Button X Opening: Press button 1 and swing the storage compartment cover upward in direction of arrow. Storage compartment between rear seats 1 Handle X Opening: Pull handle 1 backward in the direction of arrow. Rear storage box ! Do not sit on or lean your body weight against th[...]

Useful features 419 1 Trunk floor 2 Suitcase storage space Rear storage space Only the S 600 is equipped with the rear storage space. 1 Storage space 2 Trunk floor Useful features Cup holders G Warning! In order to help prevent spilling liquids on vehicle occupants and/or vehicle equipment, only use containers that fit into the cup holder. Use lids[...]

Useful features 420 Rear cup holder Vehicles without control panel in rear armrest 1 Chrome label X Opening: Press chrome label 1 . Vehicles with control panel in rear armrest 1 Cup holder X Opening: Press front of cup holder 1 . Sun visors G Warning! Do not use the vanity mirror while driving. Keep the vanity mirrors in the sun visors closed while[...]

Useful features 421 Vanity mirror The mirror lamp only functions when the sun visor is engaged in mounting. X Flip sun visor down. X Lift up vanity mirror cover 5 . Vanity mirror lamp 1 comes on. Rear vanity mirror 1 Mark X Opening: Press mark 1 . The vanity mirror swings down in direction of arrow. X Closing: Swing vanity mirror up until it engage[...]

Useful features 422 Ashtrays Center console ashtray G Warning! Remove front ashtray insert only with vehicle standing still. 1 Button 2 Cover plate X Opening: Press mark on cover plate 2 forward. X Removing ashtray insert: Push button 1 to the left. The ashtray is disengaged and slides out a short way. X Grab and remove ashtray insert from ashtray [...]

Useful features 423 Center console 1 Cigarette lighter X Switch on the ignition. X Open the cover plate ( Y page 422). X Push in cigarette lighter 1 . Cigarette lighter 1 will pop out automatically when hot. X Take out cigarette lighter 1 . X Reinsert cigarette lighter 1 in its socket after use. Rear center console 1 Cigarette lighter X Switch on t[...]

Useful features 424 1 Power outlet Telephone i Various mobile phone cradles can be installed in the front center armrest, see separate installation instructions for the mobile phone cradle. These mobile phone cradles can be obtained from an authorized Mercedes-Benz Center. The functions and services available to you while using the mobile phone dep[...]

Useful features 425 Tele Aid ! In order to activate the Tele Aid system, a subscriber agreement must be completed. To ensure your system is activated and operational, please press the ¡ button to perform the acquaintance call. Failure to complete either of these steps may result in a system that is not activated. If you have any questions regardin[...]

Useful features 426 test, a malfunction in the system has been detected. If a malfunction is indicated as outlined above, the system may not operate as expected. In case of an emergency, help will have to be summoned by other means. Have the system checked at the nearest Mercedes-Benz Center or contact the Response Center at 1-800-756-9018 (in the [...]

Useful features 427 Initiating an emergency call manually 1 SOS button 2 Cover X Briefly press on cover 2 to open. X Press SOS button 1 briefly. The indicator lamp in SOS button 1 will flash until the emergency call is concluded. X Wait for a voice connection to the Response Center. X Close cover 2 after the emergency call is concluded. G Warning! [...]

Useful features 428 The Mercedes-Benz Roadside Assistance dispatcher will either dispatch a qualified Mercedes-Benz technician or arrange to tow your vehicle to the nearest authorized Mercedes-Benz Center. For services such as labor and/or towing, charges may apply. Refer to the Roadside Assistance manual for more information. The following is only[...]

Useful features 429 Information regarding the operation of your vehicle, the nearest authorized Mercedes- Benz Center or Mercedes-Benz USA products and services is available to you. For more details concerning the Tele Aid system, please visit www.mbusa.com (USA only), log in to “Owner’s Online” and visit the “My Tele Aid” section to lear[...]

Useful features 430 i If you select No , you can save the address to your address book. i The Destination Download feature is available if the relevant mobile phone network is available and data connection is possible. Search and Send i In order to utilize Search & Send your vehicle must be equipped with Tele Aid, Navigation, and an active Tele[...]

Useful features 431 i Destination addresses will download in the same order they were sent. If you have multiple Mercedes-Benz vehicles equipped with Tele Aid and active accounts, each destination address sent will be retrievable by all vehicles associated with the e-mail address you specified for your Tele Aid account. Remote door unlock In case y[...]

Useful features 432 Automatic Maintenance Call The S-Class is equipped with a feature that considerably enhances vehicle care. Just prior to reaching a vehicle maintenance milestone, Tele Aid transmits important vehicle maintenance information that alerts your authorized Mercedes-Benz Center of required service. This is automatic and does not requi[...]

Useful features 433 Interior rear view mirror with integrated remote control 1 Indicator lamp 234 Signal transmitter button 5 Hand-held remote control (not part of vehicle equipment) 6 Hand-held remote control button Programming the integrated remote control X Step 1: Switch on the ignition. X Step 2: If you have previously programmed a signal tran[...]

Useful features 434 Rolling code programming To train a garage door opener (or other rolling code devices) with the rolling code feature, follow these instructions after completing the “Programming” portion (steps 1 through 6) of this text. A second person may make the following training procedures quicker and easier. X Step 8: Locate the “tr[...]

Useful features 435 Reprogramming a single signal transmitter button To program a device using a signal transmitter button previously trained, follow these steps: X Switch on the ignition. X Press and hold the desired signal transmitter button ( 2 , 3 or 4 ). Do not release the button. Indicator lamp 1 will begin to flash after 20 seconds. X Withou[...]

Useful features 436 i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device[...]

Useful features 437 Infrared reflecting windshield Infrared reflecting glass reduces the amount of radiated heat entering the vehicle interior through the windows. The infrared reflecting glass also prevents the transmission of signals through the glass by in-vehicle electronic devices, e.g. electronic toll collection devices. To allow the use of t[...]

438[...]

439 Vehicle equipment ............................ 440 The first 1000 miles (1500 km) ....... 440 At the gas station ............................. 441 Engine compartment ........................ 443 Tires and wheels ............................... 450 Winter driving ................................... 473 Driving instructions ......................[...]

The first 1000 miles (1500 km) 440 Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. The first 1000 miles (1500 km) The more cautiously you treat[...]

At the gas station 441 At the gas station Refueling G Warning! Gasoline is highly flammable and poisonous. It burns violently and can cause serious personal injury. Never allow sparks, flames or smoking materials near gasoline! Turn off the engine before refueling. Whenever you are around gasoline, avoid inhaling fumes and any skin or clothing cont[...]

At the gas station 442 1 Fuel filler flap 2 Fuel filler cap 3 Holder X Turn off the engine. i Leaving the engine running and the fuel filler cap open can cause the yellow engine malfunction indicator lamp ± to illuminate. For more information, see also “Practical hints” ( Y page 557). X Remove the SmartKey from the starter switch. KEYLESS-GO: [...]

Engine compartment 443 Engine compartment Hood G Warning! Do not pull the release lever while the vehicle is in motion. Otherwise the hood could be forced open by passing air flow. This could cause the hood to come loose and injure you and/or others. Opening G Warning! If you see flames or smoke coming from the engine compartment, or if the coolant[...]

Engine compartment 444 2 Handle ! To avoid damage to the handle never pull up the hood on the handle. X Pull handle 2 to its stop out of radiator grille. X Pull up on hood. The hood will be automatically held open at shoulder height by gas-filled struts. Closing G Warning! When closing the hood, use extreme caution not to catch hands or fingers. Be[...]

Engine compartment 445 S 550 and S 63 AMG 1 Oil dipstick 2 Upper (max) mark 3 Lower (min) mark S 450 4MATIC and S 550 4MATIC 1 Oil dipstick 2 Upper (max) mark 3 Lower (min) mark X Pull out oil dipstick 1 . X Wipe oil dipstick 1 clean. X Fully insert oil dipstick 1 into the dipstick guide tube. X Pull out oil dipstick 1 again after approximately 3 s[...]

Engine compartment 446 X Press $ or % to select Engine Oil Level . X Press # . The following message appears in the multifunction display: Measuring Engine Oil Level Accurate Only When Vehicle Is Level One of the following messages will subsequently appear in the multifunction display: R Engine Oil Level OK R Add 1.0 qts. Engine Oil At Next Refueli[...]

Engine compartment 447 Maintenance System. For a listing of approved engine oils and oil filters, contact an authorized Mercedes-Benz Center or visit www.mbusa.com (USA only). Using engine oils and oil filters of specification other than those expressly required for the Maintenance System, or changing of oil and oil filter at change intervals longe[...]

Engine compartment 448 Coolant level The engine coolant is a mixture of water and anticorrosion/antifreeze. When checking the coolant level, the vehicle must be parked on level ground, and the coolant temperature must be below 158‡ (70†). G Warning! In order to avoid any potentially serious burns: R Use extreme caution when opening the hood if [...]

Engine compartment 449 ! Only use washer fluid which is suitable for plastic lenses. Improper washer fluid can damage the plastic lenses of the headlamps. ! Do not use distilled or deionized water in the washer fluid reservoir. Otherwise, the washer fluid level sensor could be damaged. Example illustration S 550 with AIRMATIC 1 Cap for washer fluid[...]

Tires and wheels 450 Tires and wheels Safety notes Contact an authorized Mercedes-Benz Center for information on tested and recommended rims and tires for summer and winter operation. They can also offer advice concerning tire service and purchase. G Warning! Replace rims or tires with the same designation, manufacturer and type as shown on the ori[...]

Tires and wheels 451 Tire care and maintenance G Warning! Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. If the tire tread is worn to minimum tread depth, or if the tires have sustained damage, replace them. Check t[...]

Tires and wheels 452 1 TWI ( T read W ear I ndicator) The treadwear indicator appears as a solid band across the tread. Storing tires ! Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and fuels. Cleaning tires ! Never use a round nozzle to power wash tires. The inte[...]

Tires and wheels 453 1 Driver’s door B-pillar Following is a discussion on how to work with the information contained on the Tire and Loading Information placard with regards to loading your vehicle. Tire and Loading Information G Warning! Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Informa[...]

Tires and wheels 454 1 Seating capacity information on the Tire and Loading Information placard Steps for determining correct load limit The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 1966”. X St[...]

Tires and wheels 455 Example Combined weight limit of occupants and cargo from Tire and Loading Information placard Number of occupants (driver and passengers) Seating configuration Occupants weight Combined weight of all occupants Available cargo/luggage and trailer tongue weight (total load limit from Tire and Loading Information placard minus co[...]

Tires and wheels 456 have the loaded vehicle (including driver, passengers and all cargo and, if applicable, trailer fully loaded) weighed on a suitable commercial scale. Trailer tongue load The tongue load of any trailer is an important weight to measure because it affects the load you can carry in your vehicle. If a trailer is towed, the tongue l[...]

Tires and wheels 457 1 Tire and Loading Information placard with recommended cold tire inflation pressures The Tire and Loading Information placard lists the recommended cold tire inflation pressures for maximum loaded vehicle weight. The tire inflation pressures listed apply to the tires installed as original equipment. Important notes on tire inf[...]

Tires and wheels 458 Underinflated tires can R cause excessive and uneven tire wear R adversely affect fuel economy R lead to tire failure from being overheated R adversely affect handling characteristics Overinflated tires G Warning! Follow recommended tire inflation pressures. Do not overinflate tires. Overinflated tires can adversely affect hand[...]

Tires and wheels 459 stem of the valve with e.g. a tip of a pen. Then recheck the tire inflation pressure with the tire gauge. X Install the valve cap. X Repeat this procedure for each tire. Advanced Tire Pressure Monitoring System (Advanced TPMS) Your vehicle is equipped with the Advanced Tire Pressure Monitoring System (Advanced TPMS). It measure[...]

Tires and wheels 460 Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately 1 minute and then remain continuously illum[...]

Tires and wheels 461 or near the vehicle could cause the TPMS to malfunction. i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesir[...]

Tires and wheels 462 X Using the Tire and Loading Information placard on the driver’s door B-pillar ( Y page 453) or, if available, the supplemental tire inflation pressure information on the inside of the fuel filler flap, make sure the tire inflation pressure of all four tires is correct. X Switch on the ignition. X Press button ( or & on t[...]

Tires and wheels 463 1 Uniform Tire Quality Grading Standards ( Y page 468) 2 DOT, Tire Identification Number ( Y page 466) 3 Maximum tire load ( Y page 467) 4 Maximum tire inflation pressure ( Y page 467) 5 Manufacturer 6 Tire ply material ( Y page 469) 7 Tire size designation, load and speed rating ( Y page 463) 8 Load identification ( Y page 466[...]

Tires and wheels 464 Aspect ratio Aspect ratio 2 is the dimensional relationship between tire section height and section width and is expressed in percentage. The aspect ratio is arrived at by dividing section height by section width. Tire code Tire code 3 indicates the tire construction type. The “R” stands for radial tire type. Letter “D”[...]

Tires and wheels 465 Index Speed rating V up to 149 mph (240 km/h) W up to 168 mph (270 km/h) Y up to 186 mph (300 km/h) ZR...Y up to 186 mph (300 km/h) ZR...(..Y) above 186 mph (300 km/h) ZR above 149 mph (240 km/h) R At the tire manufacturer’s option, any tire with a speed capability above 149 mph (240 km/h) can include a “ZR” in the size d[...]

Tires and wheels 466 maximum speed permitted by the electronic speed limiter. Make sure your tires have the required tire speed rating as specified for your vehicle in the “Technical data” section ( Y page 594), for example when purchasing new tires. If you are uncertain about the correct reading of the information given on a tire’s sidewall,[...]

Tires and wheels 467 Manufacturer’s identification mark Manufacturer’s identification mark 2 denotes the tire manufacturer. New tires have a mark with two symbols. Retreaded tires have a mark with four symbols. For more information on retreaded tires, see ( Y page 450). Tire size Code 3 indicates the tire size. Tire type code Tire type code 4 m[...]

Tires and wheels 468 1 Maximum permissible tire inflation pressure i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration. This is the maximum permissible tire inflation pressure for the tire. Always follow the recommended tire inflation pressure ( Y page 456) for prope[...]

Tires and wheels 469 service practices and differences in road characteristics and climate. Traction G Warning! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. The traction grades, from highest to lowest, are AA,[...]

Tires and wheels 470 i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration. This marking tells you about the type of cord and number of plies in the sidewall and under the tread. Tire and loading terminology Accessory weight The combined weight (in excess of those stan[...]

Tires and wheels 471 tongue load). It is indicated on certification label located on the driver’s door B-pillar. Kilopascal (kPa) The metric unit for air pressure. There are 6.9 kPa to 1 psi; another metric unit for air pressure is bar. There are 100 kilopascals (kPa) to 1 bar. Maximum load rating The maximum load in kilograms and pounds that can[...]

Tires and wheels 472 Tire load rating Numerical code associated with the maximum load a tire can support. Tire ply composition and material used This indicates the number of plies or the number of layers of rubber-coated fabric in the tire tread and sidewall. Tire manufacturers also must indicate the ply materials in the tire and sidewall, which in[...]

Winter driving 473 If applicable to your vehicle’s tire configuration, tires can be rotated according to the tire manufacturer’s recommended intervals in the tire manufacturer’s warranty pamphlet located in your vehicle literature portfolio. If none is available, tires should be rotated every 3 000 to 6 000 miles (5 000 to 10 000 km), or soon[...]

Winter driving 474 Snow chains ! When driving with snow chains, always select the raised level of the vehicle level control. Other settings may result in damage to your vehicle. ! Some tire sizes do not leave adequate clearance for snow chains. To help avoid serious damage to your vehicle or tires, make sure the use of snow chains is permissible as[...]

Driving instructions 475 vehicle control. Your vehicle’s ABS will not prevent this type of loss of control. The most important rule for slippery or icy roads is to drive sensibly and to avoid abrupt acceleration, braking and steering maneuvers. Do not use the cruise control or DISTRONIC Plus system under such conditions. When the vehicle is in da[...]

Driving instructions 476 Drinking and driving G Warning! Drinking and driving and/or taking drugs and driving are very dangerous combinations. Even a small amount of alcohol or drugs can affect your reflexes, perceptions and judgment. The possibility of a serious or even fatal accident are greatly increased when you drink or take drugs and drive. D[...]

Driving instructions 477 expected brake effect. Maintain a safe distance from vehicles in front. To help prevent brake disk corrosion after driving on wet or salt-covered roads, it is advisable to brake the vehicle with considerable force prior to parking. The heat generated serves to dry the brakes. Salt-covered roads G Warning! A layer of salt on[...]

Driving instructions 478 (SmartKey in starter switch position 0 or 1 or KEYLESS-GO start/stop button in position 0 or 1 ) when the electronic parking brake is being tested on a brake test dynamometer or when the vehicle is being towed with one axle raised. Active braking action through the ESP ® may otherwise seriously damage the brake system whic[...]

Driving instructions 479 reduces engine performance and causes premature brake and drivetrain wear which is not covered by the Mercedes-Benz Limited Warranty. Hydroplaning Depending on the depth of the water layer on the road, hydroplaning may occur, even at low speeds and with new tires. In heavy rain or when conditions indicate possible hydroplan[...]

Driving instructions 480 Only operate the COMAND 9 (Cockpit Management and Data System) if road, weather and traffic conditions permit. Otherwise, you may not be able to observe traffic conditions and could endanger yourself and others. Bear in mind that at a speed of just 30 mph (approximately 50 km/h), your vehicle is covering a distance of 44 fe[...]

Maintenance 481 Maintenance Notes The Maintenance System in your vehicle tracks the distance driven and the time elapsed since the last maintenance service, calculates other maintenance service work required, and calls for the next maintenance service accordingly. We strongly recommend that you have your vehicle serviced at an authorized Mercedes- [...]

Maintenance 482 Maintenance service term exceeded If you have exceeded the suggested maintenance service term, you will see the following message in the multifunction display: Service A Exceeded by XXXX miles (km) Service A Exceeded By XXX days In addition, a signal sounds when the message appears. Any authorized Mercedes-Benz Center will reset the[...]

Vehicle care 483 Vehicle care Cleaning and care of the vehicle Notes Regular and proper care will help to maintain the value of your vehicle. G Warning! Many cleaning products can be hazardous. Some are poisonous, others are flammable. Always follow the instructions on the particular container. Always open your vehicle’s doors or windows when cle[...]

Vehicle care 484 here. In such cases it is best to seek aid at an authorized Mercedes-Benz Center. The following topics deal with the cleaning and care of your vehicle and give important “how-to” information as well as references to Mercedes-Benz approved vehicle-care products. Power washer ! Follow the instructions provided by the power washer[...]

Vehicle care 485 Hand-wash X Do not use hot water or wash your vehicle in direct sunlight. X Only use a soft, wet cloth or sponge to clean the vehicle. X Only use a mild vehicle wash detergent, such as Mercedes-Benz approved Car Shampoo. X Thoroughly spray the vehicle with a diffused jet of water. X Do not spray directly towards the ventilation int[...]

Vehicle care 486 Window cleaning solutions which are not suitable may damage the plastic lamp lenses of the headlamps. Therefore, do not use abrasives, solvents or cleaners that contain solvents. Cleaning the DISTRONIC Plus/PRE- SAFE ® Brake system sensors The sensors are integrated in the front bumpers and cannot be seen from the outside. 1 Senso[...]

Vehicle care 487 scratching cloth to clean the bumper area near sensors. Cleaning the rear view camera lens 1 Camera lens X Only use clean water and a soft, non- scratching cloth to clean camera lens 1 . Be careful not to apply wax to camera lens 1 when waxing the vehicle. If necessary, remove the wax using the Mercedes-Benz approved Car Shampoo wi[...]

Vehicle care 488 ! If you use a windshield cleaning product, make sure that none of the cleaning product comes into contact with the lens of the Night View Assist camera. X Use recessed handles 1 to swing camera cover up. Cleaning the windows and the wiper blades ! The windshield wipers must be in a vertical position before folding them away from t[...]

Vehicle care 489 Light alloy wheels If possible, clean wheels once a week. X Use Mercedes-Benz approved Wheel Care, a soft bristle brush and a strong spray of water for cleaning the light alloy wheels. ! Only use acid-free cleaning materials. Acid may cause corrosion or damage the clear coat. ! The vehicle should not be parked for an extended perio[...]

Vehicle care 490 Seat belts X Only use clear, lukewarm water and soap. ! The seat belts must not be treated with chemical cleaning agents. Do not dry the seat belts at temperatures above 176‡ (80†) or in direct sunlight. G Warning! Do not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequ[...]

491 Vehicle equipment ............................ 492 Where will I find ...? .......................... 492 Vehicle status messages in the multifunction display ....................... 495 What to do if … .................................. 548 Unlocking/locking manually ........... 561 Resetting activated head restraints 562 Replacing SmartKey b[...]

Where will I find ...? 492 Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Where will I find ...? First aid kit i Check expiration dates and co[...]

Where will I find ...? 493 1 Collapsible wheel chock 2 Vehicle tool kit box cover 3 Tool bag 4 Jack X Open vehicle tool kit box cover 2 . Collapsible wheel chock The collapsible wheel chock serves to secure the vehicle, e.g. while changing a wheel. X Take the collapsible wheel chock from the vehicle tool kit ( Y page 492). 1 Tilt the plates upward [...]

Where will I find ...? 494 Operational position X Turn the crank handle clockwise. Before placing the jack back into the vehicle tool kit: X Fully collapse the jack. X Fold in the crank handle (storage position). Spare wheel G Observe Safety notes, see page 571. The spare wheel is located in the space underneath the trunk floor. X Removing: Open th[...]

Vehicle status messages in the multifunction display 495 Vehicle status messages in the multifunction display Notes Warning and malfunction messages appear in the multifunction display located in the instrument cluster. Certain warning and malfunction messages are accompanied by an audible signal. Address these messages accordingly and follow the a[...]

Vehicle status messages in the multifunction display 496 Text messages Safety systems Display messages Possible cause/consequence Possible solution PRE-SAFE Inoperative See Oper. Manual The PRE-SAFE ® system itself has failed. All other occupant safety systems, such as the air bags, are still available. X Contact an authorized Mercedes-Benz Center[...]

Vehicle status messages in the multifunction display 497 Display messages Possible cause/consequence Possible solution PRE-SAFE Function Limited See Oper. Manual The PRE-SAFE ® Brake is unavailable due to a malfunction. The BAS Plus may also be unavailable. X Contact an authorized Mercedes-Benz Center as soon as possible. Practical hints Z[...]

Vehicle status messages in the multifunction display 498 Display messages Possible cause/consequence Possible solution Front Passenger Airbag Enabled See Oper. Manual The front passenger front air bag is activated while driving even though a child, small individual, or object below the system’s weight threshold is on the front passenger seat, or [...]

Vehicle status messages in the multifunction display 499 Display messages Possible cause/consequence Possible solution multifunction display in the instrument cluster ( Y page 30) for the following: With the seat unoccupied and the ignition switched on, R the 59 indicator lamp right of the instrument cluster should illuminate and remain illuminated[...]

Vehicle status messages in the multifunction display 500 Display messages Possible cause/consequence Possible solution soon as possible at an authorized Mercedes-Benz Center. G Warning! If the 59 indicator lamp remains out even after performing the above corrective steps, do not have any children 12 years old and under and other small individuals u[...]

Vehicle status messages in the multifunction display 501 Display messages Possible cause/consequence Possible solution Front Passenger Airbag Disabled See Oper. Manual The front passenger front air bag is deactivated while driving even though an adult or someone larger than a small individual is occupying the front passenger seat. Forces acting on [...]

Vehicle status messages in the multifunction display 502 Display messages Possible cause/consequence Possible solution ( Y page 50) has deactivated the front passenger front air bag. R the message Front Passenger Airbag Enabled See Oper. Manual or the message Front Passenger Airbag Disabled See Oper. Manual should not appear in the multifunction di[...]

Vehicle status messages in the multifunction display 503 Driving systems Display messages Possible cause/consequence Possible solution Cruise Control - - - mph One of the activation conditions for the cruise control has not been fulfilled. For example, you have attempted to set a speed below 20 mph (30 km/h). X Drive faster than 20 mph (30 km/h), i[...]

Vehicle status messages in the multifunction display 504 Display messages Possible cause/consequence Possible solution DISTRONIC PLUS Currently Unavailable See Oper. Manual The DISTRONIC Plus is switched off and is temporarily unavailable. The DISTRONIC Plus is deactivated if: R the DISTRONIC Plus cover in the radiator grille is dirty R its functio[...]

Vehicle status messages in the multifunction display 505 Display messages Possible cause/consequence Possible solution DISTRONIC PLUS - - - mph One of the activation conditions for the DISTRONIC Plus has not been fulfilled. For example, you have attempted to set a speed below 20 mph (30 km/h). X Drive faster than 20 mph (30 km/h), if the situation [...]

Vehicle status messages in the multifunction display 506 Display messages Possible cause/consequence Possible solution Blind Spot Assist Currently Unavailable See Oper. Manual The Blind Spot Assist is deactivated because the area around the sensors in the front or the rear bumper is dirty. X Clean the front and rear bumper ( Y page 486). The Blind [...]

Vehicle status messages in the multifunction display 507 Display messages Possible cause/consequence Possible solution Parking Guidance Currently Unavailable See Oper. Manual The Advanced Parking Guidance is deactivated because the area around the sensors in the front or the rear bumper is dirty. X Clean the front and rear bumper ( Y page 486). The[...]

Vehicle status messages in the multifunction display 508 Display messages Possible cause/consequence Possible solution Parking Guidance Finished Advanced Parking Guidance: The vehicle is in the end position. The display message disappears automatically. Radar Sensors Deactivated See Oper. Manual You have attempted to activate the DISTRONIC Plus, th[...]

Vehicle status messages in the multifunction display 509 Display messages Possible cause/consequence Possible solution Shift to P or N to Start Engine You have attempted to start the engine while the automatic transmission was in reverse gear R or drive position D . X Shift the automatic transmission into park position P or neutral position N . Aux[...]

Vehicle status messages in the multifunction display 510 Display messages Possible cause/consequence Possible solution Service X Due The specified maintenance service must be carried out ( Y page 481). X Have the maintenance service carried out at an authorized Mercedes-Benz Center as soon as possible. Service X Exceeded by X days by XXX mls (km) T[...]

Vehicle status messages in the multifunction display 511 Display messages Possible cause/consequence Possible solution Tire Pressure Monitor Currently Unavailable The Advanced TPMS is unable to monitor the tire inflation pressure due to: R a nearby radio interference source R the on-board voltage is too low R excessive wheel sensor temperatures As [...]

Vehicle status messages in the multifunction display 512 Symbol messages Brake Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Check Brake Fluid Level There is insufficient brake fluid in the reservoir. Risk of accident! X Stop the vehicle in a safe location or as soon as it is safe to do so. X Engage the elec[...]

Vehicle status messages in the multifunction display 513 Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Brake Immediately A malfunction has occurred while DISTRONIC Plus was switched on. X While observing surrounding traffic conditions and when it is safe, immediately depress the brake pedal firmly until the [...]

Vehicle status messages in the multifunction display 514 Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Service See Oper. Manual S 600 and S 65 AMG only: The brake system sensors are malfunctioning. The brake system continues to function normally with full brake force boost. X Continue driving with added caut[...]

Vehicle status messages in the multifunction display 515 Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Parking Brake See Oper. Manual In addition, the red indicator lamp for the electronic parking brake is either on or off and the yellow warning lamp for the electronic parking brake comes on. The electronic [...]

Vehicle status messages in the multifunction display 516 Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Parking Brake See Oper. Manual In addition, the red indicator lamp for the electronic parking brake flashes. The power supply for the electronic parking brake was malfunctioning or the electronic parking br[...]

Vehicle status messages in the multifunction display 517 Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Parking Brake See Oper. Manual When you engage or release the electronic parking brake, the red indicator lamp for the electronic parking brake flashes for approx. 10 seconds. Afterward, it goes out or come[...]

Vehicle status messages in the multifunction display 518 Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Parking Brake Inoperative When you engage or release the electronic parking brake, the red indicator lamp for the electronic parking brake flashes and goes out after approx. 10 seconds. The yellow warning l[...]

Vehicle status messages in the multifunction display 519 Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Please Release Parking Brake In addition, the red indicator lamp for the electronic parking brake flashes, the yellow warning lamp for the electronic parking brake comes on and an acoustic warning sounds. T[...]

Vehicle status messages in the multifunction display 520 Display messages Possible cause/consequence Possible solution (USA only) (Canada only) Turn On the Ignition to Release the Parking Brake In addition, the red indicator lamp for the electronic parking brake comes on. You have tried to release the electronic parking brake, but the ignition was [...]

Vehicle status messages in the multifunction display 521 Safety systems Display messages Possible cause/consequence Possible solution ABS and ESP Inoperative See Oper. Manual The brake system is still functioning normally but due to a malfunction, the ABS, the BAS, the BAS Plus, the ESP ® , the PRE-SAFE ® system and the PRE-SAFE ® Brake are unav[...]

Vehicle status messages in the multifunction display 522 Display messages Possible cause/consequence Possible solution Inoperative See Oper. Manual ESP ® as well as the PRE-SAFE ® system are switched off due to a malfunction. In addition, the yellow ESP ® warning lamp v comes on. The ABS may not be operational and the following systems are not a[...]

Vehicle status messages in the multifunction display 523 Display messages Possible cause/consequence Possible solution Inoperative See Oper. Manual S 600 and S 65 AMG only: The ESP ® as well as the PRE-SAFE ® system are switched off due to a malfunction. In addition, the v and ; (USA only) or 3 (Canada only) warning lamps in the instrument cluste[...]

Vehicle status messages in the multifunction display 524 Display messages Possible cause/consequence Possible solution Currently Unavailable See Oper. Manual The ESP ® and the PRE-SAFE ® system are switched off due to undervoltage. It is possible that the battery is not charged. The brake system still functions normally. The BAS Plus and the PRE-[...]

Vehicle status messages in the multifunction display 525 Display messages Possible cause/consequence Possible solution Front Left SRS Malfunction Service Required Components of the driver’s supplemental restraint system may not work properly. X Drive with added caution to the nearest authorized Mercedes-Benz Center. Front Right SRS Malfunction Se[...]

Vehicle status messages in the multifunction display 526 Display messages Possible cause/consequence Possible solution Right Side Curtain Airbag Malfunction Service Required The right window curtain air bag may not work properly. X Drive with added caution to the nearest authorized Mercedes-Benz Center. G Warning! In the event a malfunction of the [...]

Vehicle status messages in the multifunction display 527 Driving systems Display messages Possible cause/consequence Possible solution Malfunction Stop Vehicle You have started driving although the vehicle level is still too low. The vehicle is being raised. The ABC message goes out after a few seconds. X Stop your vehicle in a safe location or as [...]

Vehicle status messages in the multifunction display 528 Display messages Possible cause/consequence Possible solution Vehicle Rising Please Wait Briefly The vehicle’s level is too low while at a standstill. The vehicle will be raised. X Wait until the message disappears from the multifunction display. STOP, Car Too Low You have started driving a[...]

Vehicle status messages in the multifunction display 529 Display messages Possible cause/consequence Possible solution Vehicle Rising Please Wait Briefly Vehicles with AIRMATIC: The vehicle level is too low. X Wait until the message disappears from the multifunction display. Night View Assist Inoperative Night View Assist is malfunctioning. X Conta[...]

Vehicle status messages in the multifunction display 530 Display messages Possible cause/consequence Possible solution Night View Assist Lights ON or AUTO, Not in R Gear You have tried to switch on Night View Assist, but the light switch is not set to * or B . In addition, the automatic transmission is in reverse gear R . X Turn the exterior lamp s[...]

Vehicle status messages in the multifunction display 531 Display messages Possible cause/consequence Possible solution Shift to P You have attempted to turn off the engine with the KEYLESS-GO start/stop button and opened the driver’s door with the automatic transmission not shift to park position P . X Shift the automatic transmission to park pos[...]

Vehicle status messages in the multifunction display 532 Display messages Possible cause/consequence Possible solution Close Doors to Lock Vehicle You wanted to lock the vehicle but not all doors were closed. X Close doors and lock vehicle again. Don’t Forget Your Key This display appears for a maximum of 60 seconds if the driver’s door is open[...]

Vehicle status messages in the multifunction display 533 Display messages Possible cause/consequence Possible solution Key Not Detected The SmartKey with KEYLESS-GO is momentarily not detected. X Change the position of the SmartKey in the vehicle. X If necessary, remove KEYLESS-GO button from the starter switch ( Y page 308). X Operate the vehicle [...]

Vehicle status messages in the multifunction display 534 Display messages Possible cause/consequence Possible solution Check Washer Fluid The water level has dropped to approx. 1.1 US qts (1.0 l). X Add washer fluid ( Y page 448). Engine Display messages Possible cause/consequence Possible solution Check Coolant Level See Oper. Manual The coolant l[...]

Vehicle status messages in the multifunction display 535 Display messages Possible cause/consequence Possible solution Coolant Low Stop Vehicle Turn Engine Off The coolant is too hot. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Engage the electronic parking brake. X Only start the engine again[...]

Vehicle status messages in the multifunction display 536 Display messages Possible cause/consequence Possible solution Coolant Low Stop Vehicle Turn Engine Off The poly-V-belt could be broken. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Engage the electronic parking brake. X Check the poly-V-b[...]

Vehicle status messages in the multifunction display 537 Display messages Possible cause/consequence Possible solution The cooling fan for the coolant is malfunctioning. X Observe the coolant temperature gauge in the instrument cluster. If the coolant temperature is below 248‡ (120†), you may continue driving to an authorized Mercedes-Benz Cent[...]

Vehicle status messages in the multifunction display 538 Display messages Possible cause/consequence Possible solution Check Engine Oil Level (Add 1 quart) (USA only) Check Engine Oil Level (Add 1 Liter) (Canada only) S 600 and S 65 AMG only: The engine oil level is too low. X Add engine oil ( Y page 446) and check the engine oil level ( Y page 444[...]

Vehicle status messages in the multifunction display 539 Display messages Possible cause/consequence Possible solution Engine Oil Level Cannot Be Measured S 600 and S 65 AMG only: The measuring system is malfunctioning. X Have the measuring system checked at an authorized Mercedes-Benz Center. Engine Oil Level Too High S 600 and S 65 AMG only: You [...]

Vehicle status messages in the multifunction display 540 Lamps Display messages Possible cause/consequence Possible solution Check Center Brake Lamp The high mounted brake lamp is malfunctioning. This message will only appear if a critical number of LEDs have stopped working. X Contact an authorized Mercedes-Benz Center as soon as possible. Check L[...]

Vehicle status messages in the multifunction display 541 Display messages Possible cause/consequence Possible solution Auto Lamp Function Inoperative The light sensor is malfunctioning. Daytime driving lamps come on automatically. X Contact an authorized Mercedes-Benz Center as soon as possible. To switch off the headlamps (U.S. vehicles only): X S[...]

Vehicle status messages in the multifunction display 542 Display messages Possible cause/consequence Possible solution Check Front Left Turn Signal or Check Front Right Turn Signal The left or right front turn signal lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. Check Left High Beam or Check Right High Be[...]

Vehicle status messages in the multifunction display 543 Display messages Possible cause/consequence Possible solution Check Left Fog Lamp or Check Right Fog Lamp The left or right front fog lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. Check Rear Left Fog Lamp The rear fog lamp is malfunctioning. A subst[...]

Vehicle status messages in the multifunction display 544 Display messages Possible cause/consequence Possible solution Check Front Left Sidemarker Lamp or Check Front Right Sidemarker Lamp The front left or right side marker lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. Check Rear Left Sidemarker Lamp or [...]

Vehicle status messages in the multifunction display 545 Tires Display messages Possible cause/consequence Possible solution Caution Tire Defect One or more tires are deflating. The respective tire is indicated in the multifunction display. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers. X Engage the electro[...]

Vehicle status messages in the multifunction display 546 Display messages Possible cause/consequence Possible solution Tire Pressure Please Rectify The pressure is too low in one or more tires. Or the tire pressures of the individual wheels differ too radically from one another. X Check and correct tire inflation pressure as required ( Y page 458).[...]

Vehicle status messages in the multifunction display 547 G Warning! Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires. Overinflated tires can adversely af[...]

What to do if … 548 What to do if … Lamps in instrument cluster Notes If any of the following lamps in the instrument cluster fails to come on during the bulb self- check when switching on the ignition, have the respective bulb checked and replaced if necessary. When you switch on the ignition, all lamps (except high-beam headlamp indicator lam[...]

What to do if … 549 Brake Problem Possible cause/consequence Suggested solutions - The yellow ABS indicator lamp comes on while the engine is running. The ABS has detected a malfunction and switched off. The BAS, ESP ® , EBP and PRE- SAFE ® are also switched off (see messages in multifunction display). The brake system is still functioning norm[...]

What to do if … 550 Problem Possible cause/consequence Suggested solutions - v The yellow ABS malfunction indicator lamp and the yellow ESP ® warning lamp come on while the engine is running and an acoustic warning sounds. The brake system is still functioning normally but due to a malfunction, the ABS, the BAS, the EBP, the ESP ® and PRE-SAFE [...]

What to do if … 551 Problem Possible cause/consequence Suggested solutions ; (USA only) 3 (Canada only) The red brake warning lamp comes on while the engine is running and an acoustic warning sounds. There is insufficient brake fluid in the reservoir. X Risk of accident! Do not drive any further. Stop the vehicle in a safe location as soon as it [...]

What to do if … 552 Safety systems Problem Possible cause/consequence Suggested solutions < The red seat belt telltale comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passengers to fasten your seat belts before driving off. X Fasten your seat belts. Regardless of whether the seat belts[...]

What to do if … 553 Problem Possible cause/consequence Suggested solutions < During driving the red seat belt telltale flashes and you additionally hear an intermittent warning chime with increasing intensity. The vehicle’s speed once exceeded 15 mph (25 km/h) and you and/or your front passenger have forgotten to fasten your seat belts. X Fa[...]

What to do if … 554 For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked. Otherwise the SRS may not be activated when needed in an accident, which could result in serious or fatal injury, or it might deploy unexpectedly and unnecessarily which could also result in injury[...]

What to do if … 555 Problem Possible cause/consequence Suggested solutions v The yellow ESP ® warning lamp flashes while driving. The ESP ® or Electronic Traction System (ETS/4-ETS) has come into operation because of detected traction loss in at least one tire. The cruise control and the DISTRONIC Plus are deactivated. X When driving off, apply[...]

What to do if … 556 Vehicle Problem Possible cause/consequence Suggested solutions The yellow fuel tank reserve warning lamp in the fuel gauge comes on while driving. The fuel level has gone below the reserve mark. X Refuel at the next gas station. Practical hints[...]

What to do if … 557 Engine Problem Possible cause/consequence Suggested solutions ± The yellow engine malfunction indicator lamp comes on when the engine is running. There may be a malfunction in: R The fuel management system R The ignition system R The emission control system R Systems which affect emissions Such malfunctions may result in exce[...]

What to do if … 558 Tires Problem Possible cause/consequence Suggested solutions H USA only: Combination low tire pressure telltale/TPMS malfunction telltale for the Advanced TPMS illuminates continuously. Canada only: Low tire pressure telltale for the Advanced TPMS illuminates continuously. The Advanced TPMS detects a loss of pressure in at lea[...]

What to do if … 559 more of your tires are significantly underinflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Underinflat[...]

What to do if … 560 G Warning! If the 59 indicator lamp illuminates and remains illuminated with the weight of a typical adult or someone larger than a small individual on the front passenger seat, do not have any passenger use the front passenger seat until the system has been repaired. Problem Possible cause/consequence Suggested solutions 59 T[...]

Unlocking/locking manually 561 Unlocking/locking manually Unlocking the vehicle If you cannot unlock the vehicle with the SmartKey or with KEYLESS-GO, unlock the driver’s door and the trunk using the mechanical key. i Unlocking the vehicle with the mechanical key and opening the driver’s door or the trunk will trigger the anti-theft alarm syste[...]

Resetting activated head restraints 562 ! The trunk lid swings open upwards automatically. Always make sure there is sufficient overhead clearance. X Turn mechanical key 2 back and remove it from the trunk lid lock. Locking the vehicle If you cannot lock the vehicle with the SmartKey or with KEYLESS-GO, lock it as follows: X Close the front passeng[...]

Resetting activated head restraints 563 performed at an authorized Mercedes-Benz Center. Head restraints (standard) 1 Fold back 2 Push down 3 Push back X Push the head restraint cushion by the bottom, back as far as it will go 1 . X Push the head restraint cushion down into the guide as far as it will go 2 . X Fold the head restraint cushion by the[...]

Replacing SmartKey batteries 564 Replacing SmartKey batteries If the batteries in the SmartKey are discharged, the vehicle can no longer be locked or unlocked. It is recommended to have the batteries replaced at an authorized Mercedes-Benz Center. G Warning! Batteries contain poisonous and corrosive substances. Therefore, keep the batteries out of [...]

Replacing bulbs 565 X Slide mechanical key 1 back into the SmartKey. X Check the operation of the SmartKey as well as the KEYLESS-GO function. Replacing bulbs Safety notes Safe vehicle operation depends on proper exterior lighting and signaling to a large degree. Correct headlamp adjustment is extremely important. Have headlamps checked and readjus[...]

Replacing bulbs 566 Bulbs Front lamps Lamp Type 1 Low- and high-beam lamp 10 D1S-35 W 2 Additional turn signal lamp LED 3 Parking and standing lamp W 5 W 4 Side marker lamp W 5 W 5 High-beam flasher lamp H7 (55 W) IR emitter (for Night View Assist) H11 (55 W) 6 Corner-illuminating lamp H7 (55 W) 7 Front fog lamp H11 (55 W) 8 Turn signal lamp PY 24 [...]

Replacing bulbs 567 R Your hands should be dry and free of oil and grease. R If the newly installed bulb does not come on, contact an authorized Mercedes-Benz Center. i Mercedes-Benz recommends using Longlife (LL) bulbs. Have the LEDs and bulbs for the following lamps replaced at an authorized Mercedes- Benz Center: R Additional turn signal lamps i[...]

Replacing bulbs 568 Example illustration: S 550 1 Retaining screw Removing X Turn retaining screw 1 counterclockwise. X Take washer fluid reservoir out of mounting. X Place washer fluid reservoir to the side and do not disconnect any wires or cables. Installing X Guide washer fluid reservoir into mounting so that the bottom retaining lug slides int[...]

Replacing bulbs 569 X Take out bulb holder 1 . X Take bulb out of holder 1 . X Insert new bulb into bulb holder 1 and press it all the way down. X Insert bulb holder 1 into guide in headlamp. The tab of the bulb holder 1 must be positioned on the upper left-hand side and wire 3 must point downward and to the left (driver’s side headlamp) or upwar[...]

Replacing wiper blades 570 Replacing wiper blades Safety notes G Warning! For safety reasons, switch off wipers and remove SmartKey from starter switch (vehicles with KEYLESS-GO: Make sure the vehicle’s on-board electronics have status 0 ) before replacing a wiper blade. Otherwise, the wiper motor could suddenly turn on and cause injury. G Warnin[...]

Flat tire 571 Removing wiper blades ! Do not pull on the wiper blade inserts. They could tear. X Fold the wiper arm forward until it snaps into place. 1 Turning wiper blade 2 Removing X Turn the wiper blade in direction of arrow 1 . X Slide the wiper blade sideways out of the retainer in the direction of arrow 2 . Installing wiper blades X Slide th[...]

Flat tire 572 Preparing the vehicle X Park the vehicle in a safe distance from moving traffic on a hard, flat surface when possible. X Turn on the hazard warning flasher. X Turn the steering wheel so that the front wheels are in a straight-ahead position. X Engage the electronic parking brake. X Shift the automatic transmission into park position P[...]

Flat tire 573 jack may not be able to achieve its load- bearing capacity if it is not at its full height. Never start the engine when the vehicle is raised. Also observe the notes on the jack. X Prevent the vehicle from rolling away by blocking wheels with wheel chocks or other sizeable objects. One wheel chock is included with the vehicle tool kit[...]

Flat tire 574 X Turn crank 4 clockwise until jack 3 is fully seated in take-up bracket 2 and the jack base evenly meets the ground. X Jack up the vehicle until the wheel is a maximum of 1.2 in (3 cm) from the ground. Removing the wheel 1 Alignment bolt X Unscrew uppermost wheel bolt and remove it. X Replace this wheel bolt with alignment bolt 1 sup[...]

Flat tire 575 1 Wheel bolt for light alloy rims and Minispare wheel with light alloy rim 2 Wheel bolt for Minispare wheel with steel rim (located in trunk with Minispare wheel) ! Wheel bolts 1 must be used when mounting the Minispare wheel with light alloy rim. The use of any wheel bolts other than wheel bolts 1 for the Minispare wheel with light a[...]

Battery 576 loose if they are not tightened to a torque of 110 lb-ft (150 Nm). X Fully collapse the jack, with handle folded in (storage position), see ( Y page 493). X Store the jack and the other vehicle tools in the designated storage space. For information on storing the spare wheel after it has been replaced by a regular road wheel, see ( Y pa[...]

Battery 577 G Warning! Failure to follow these instructions can result in severe injury or death. Never lean over batteries while connecting. You might get injured. Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, skin or clothing. In case it does, immediately flush affected area with water and seek medica[...]

Jump starting 578 then uses very little power and the battery is spared. If the battery is discharged, you must use the mechanical key to unlock the vehicle. Charging the battery G Warning! Never charge a battery while still installed in the vehicle unless the accessory battery charge unit approved by Mercedes-Benz is being used. Gases may escape d[...]

Jump starting 579 ! Avoid repeated and lengthy starting attempts. Do not attempt to start the engine using a battery quick-charge unit. If the engine does not run after several unsuccessful starting attempts, have it checked at the nearest authorized Mercedes-Benz Center. Excessive unburned fuel generated by repeated failed starting attempts may da[...]

Towing the vehicle 580 negative clamp 1 to a suitable ground point on the vehicle. X Get into vehicle and start engine within 30 seconds. If the starting attempt does not succeed: X Turn the SmartKey in starter switch to position 0 . X Take out the SmartKey. X Turn off engine of donor vehicle, restart it and let it run at idle speed for several min[...]

Towing the vehicle 581 Installing towing eye bolt Depending on whether you are towing a vehicle or you are being towed, the towing eye bolt can be screwed into threaded holes which are located behind covers on each bumper. The towing eye bolt is supplied with the vehicle tool kit, located underneath the trunk floor ( Y page 492). X Take the vehicle[...]

Towing the vehicle 582 Removing towing eye bolt X Loosen towing eye bolt 1 counterclockwise with wheel wrench. X Unscrew towing eye bolt 1 . X Reinstalling cover: Fit cover 1 ( Y page 581) and snap it into place. X Store the towing eye bolt and wheel wrench back into the vehicle tool kit. Towing with all wheels on the ground G Warning! If circumsta[...]

Fuses 583 X Switch off the automatic central locking ( Y page 222). X Switch on the hazard warning flasher ( Y page 328). X Make sure the automatic transmission remains in neutral position N . Observe instructions, see “Remaining in neutral position N ” ( Y page 347). ! Vehicles without 4MATIC: Because the ESP ® operates automatically, the eng[...]

Fuses 584 i In case of a blown fuse contact Roadside Assistance or an authorized Mercedes- Benz Center. If a newly inserted fuse blows again, have the cause determined and rectified by an authorized Mercedes-Benz Center. A fuse chart is located in the trunk with the vehicle tool kit ( Y page 492). The fuse chart explains the fuse allocation and fus[...]

Fuses 585 Fuse box in the rear passenger compartment 1 Cover X Opening: Swing down center armrest. X Open cover behind center armrest. X Pull cover 1 forward in direction of arrow. X Closing: Press cover 1 backward and engage. ! Make sure the seal in the cover is not damaged during opening or closing. Fuse box in engine compartment The fuse boxes a[...]

Fuses 586 ! The fuse box cover must be installed properly to prevent moisture and/or dirt from entering the fuse box and possibly impairing fuse operation. X Close the hood after checking or replacing fuses. Emergency engine shutdown If the engine cannot be turned off as described ( Y page 344), you may use the following emergency procedure. X Take[...]

587 Vehicle equipment ............................ 588 Parts service ..................................... 588 Warranty coverage ........................... 588 Identification labels .......................... 589 Engine ................................................ 591 Rims and tires ................................... 594 Electrical system ...[...]

Warranty coverage 588 Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Parts service All authorized Mercedes-Benz Centers maintain a stock of Ge[...]

Identification labels 589 Loss of Service and Warranty Information booklet Should you lose your Service and Warranty Information booklet, have an authorized Mercedes-Benz Center arrange for a replacement. It will be mailed to you. Identification labels 1 Certification label (on driver’s door B-pillar) The Vehicle Identification Number (VIN) can b[...]

Identification labels 590 i Data shown on certification label are for illustration purposes only. These data are specific to each vehicle and may vary from data shown in the illustration. Refer to certification label on vehicle for actual data specific to your vehicle. Rear center armrest 4 VIN X Fold down the rear center armrest. The VIN is emboss[...]

Engine 591 Engine Model S 450 4MATIC (221.084) 11,12 S 550 (221.171) 11,13 S 550 4MATIC (221.186) 11 Engine 273 273 273 Mode of operation 4-stroke engine, gasoline injection 4-stroke engine, gasoline injection 4-stroke engine, gasoline injection No. of cylinders 8 8 8 Bore 3.66 in (92.90 mm) 3.86 in (98.00 mm) 3.86 in (98.00 mm) Stroke 3.39 in (86.[...]

Engine 592 Model S 450 4MATIC (221.084) 11,12 S 550 (221.171) 11,13 S 550 4MATIC (221.186) 11 Firing order 1-5-4-2-6-3-7-8 1-5-4-2-6-3-7-8 1-5-4-2-6-3-7-8 Poly-V-belt 2 404 mm 2 404 mm 2 404 mm Technical data[...]

Engine 593 Model S 600 (221.176) 15 S 63 AMG (221.177) 15 S 65 AMG (221.179) 15 Engine 275 156 275 Mode of operation 4-stroke engine, gasoline injection 4-stroke engine, gasoline injection 4-stroke engine, gasoline injection No. of cylinders 12 8 12 Bore 3.23 in (82.00 mm) 4.02 in (102.20 mm) 3.25 in (82.60 mm) Stroke 3.43 in (87.00 mm) 3.72 in (94[...]

Rims and tires 594 Rims and tires Notes ! Only use tires which have been tested and approved by Mercedes-Benz. Tires approved by Mercedes-Benz are developed to provide best possible performance in conjunction with the driving safety systems on your vehicle such as the ABS or the ESP ® . Tires specially developed for your vehicle and tested and app[...]

Rims and tires 595 Same size tires Model S 450 4MATIC 17 S 550 18 S 550 4MATIC S 550 4MATIC S 450 4MATIC (AMG Sport Package) 17 S 550 4MATIC (AMG Sport Package) Rims (light alloy) 8.5 J x 18 H2 8.5 J x 19 H2 — AMG rims (light alloy) — — 8.5 J x 19 H2 Wheel offset 1.69 in (43 mm) 1.69 in (43 mm) 1.69 in (43 mm) All-season tires 19 255/45 R18 9[...]

Rims and tires 596 Model S 600 S 550 (Sport Package) S 600 (Sport Package) S 63 AMG S 63 AMG (Performance Package) S 65 AMG S 550 4MATIC Rims (light alloy) 8.5 J x 18 H2 — — AMG rims (light alloy) — 8.5 J x 19 H2 8.5 J x 20 H2 Wheel offset 1.69 in (43 mm) 1.69 in (43 mm) 1.69 in (43 mm) Summer tires 22,23 — — 255/35 ZR20 XL (Extra Load) W[...]

Rims and tires 597 Mixed size tires Model S 600 26 S 550 26 S 600 Front axle Rims (light alloy) 8.5 J x 18 H2 8.5 J x 19 H2 Wheel offset 1.69 in (43 mm) 1.69 in (43 mm) All-season tires 27 255/45 R18 99H M+S 255/40 R19 100V XL (Extra Load) M+S Rear axle Rims (light alloy) 9.5 J x 18 H2 9.5 J x 19 H2 Wheel offset 1.69 in (43 mm) 1.69 in (43 mm) All-[...]

Rims and tires 598 Model S 550 (AMG Sport Package) 28 S 550 S 63 AMG S 63 AMG (Performance Package) S 65 AMG Front axle AMG rims (light alloy) 8.5 J x 19 H2 8.5 J x 20 H2 Wheel offset 1.69 in (43 mm) 1.69 in (43 mm) Summer tires 29 255/40 R19 100Y XL (Extra Load) 255/35 ZR20 XL (Extra Load) Rear axle AMG rims (light alloy) 9.5 J x 19 H2 9.5 J x 20 [...]

Rims and tires 599 Spare wheel ! Compare the recommended tire inflation pressure for your vehicle with the tire inflation pressure on the yellow label located on the spare wheel rim. If the tire inflation pressure on the yellow label on the spare wheel rim differs from the values given in this Operator’s Manual, inflate the tire to the recommende[...]

Electrical system 600 Electrical system Model S 450 4MATIC 32 S 550 33 S 550 4MATIC S 600 S 63 AMG S 65 AMG Alternator 14 V/180 A 14 V/220 A 14 V/220 A 14 V/220 A Starter motor 12 V/1.7 kW 12 V/2.0 kW 12 V/2.1 kW 12 V/1.7 kW Starter battery 12 V/35 Ah 12 V/35 Ah 12 V/35 Ah 12 V/35 Ah Battery for electrical consumers 12 V/95 Ah 12 V/95 Ah 12 V/95 Ah[...]

Main dimensions 601 Main dimensions Model S 450 4MATIC 34 S 550 4MATIC S 550 35 S 600 S 63 AMG S 65 AMG Overall vehicle length 205.1 in (5 210 mm) 205.1 in (5 210 mm) 206.5 in (5 245 mm) Overall vehicle width, exterior rear view mirrors folded out 83.2 in (2 113 mm) 83.2 in (2 113 mm) 83.2 in (2 113 mm) Overall vehicle height 58.9 in (1 495 mm) 58.[...]

Weights 602 Weights Model All models Roof load max. 220 lb (100 kg) Trunk load max. 220 lb (100 kg) Technical data[...]

Fuels, coolants, lubricants etc. 603 Fuels, coolants, lubricants etc. Capacities Vehicle components and their respective lubricants must match. Therefore only use products tested and approved by Mercedes- Benz. For information on tested and approved products, contact an authorized Mercedes- Benz Center or visit www.mbusa.com (USA only). G Warning! [...]

Fuels, coolants, lubricants etc. 604 Model Capacity Fuels, coolants, lubricants, etc. S 550 37 10.4 US qt (9.8 l) S 600 8.1 US qt (7.7 l) S 63 AMG 39 9.25 US qt (8.75 l) S 65 AMG 9.2 US qt (8.7 l) Rear axle S 450 4MATIC 36 S 550 4MATIC 1.9 US qt (1.8 l) Hypoid gear oil SAE 85 W 90 S 550 37 1.3 US qt (1.2 l) S 600 2.1 US qt (2.0 l) S 63 AMG 1.3 US q[...]

Fuels, coolants, lubricants etc. 605 Model Capacity Fuels, coolants, lubricants, etc. Power steering S 450 4MATIC 36 S 550 37 S 550 4MATIC S 63 AMG 1.1 US qt (1.0 l) MB Power Steering Fluid (Chevron Texaco PSF 9109) S 600 S 65 AMG 1.3 US qt (1.2 l) Brake system 0.63 US qt (0.6 l) MB Brake Fluid (DOT 4+) Cooling system (vehicles without rear climate[...]

Fuels, coolants, lubricants etc. 606 Model Capacity Fuels, coolants, lubricants, etc. Fuel tank, including a reserve of 23.8 US gal (90.0 l) Premium unleaded gasoline (Minimum Posted Octane 91 [Avg. of 96 RON/86 MON]) All models except AMG vehicles 2.9 US gal (11.0 l) AMG vehicles 3.7 US gal (14.0 l) Air conditioning system — R134a refrigerant an[...]

Fuels, coolants, lubricants etc. 607 Use the table below to determine the MB sheet number. Model Engine type MB sheet number S 450 4MATIC 41 273 229.5 S 550 42 273 229.5 S 550 4MATIC 273 229.5 S 600 275 229.5 S 63 AMG 156 229.5 43 S 65 AMG 275 229.5 i MB sheet numbers are printed on the outside of oil containers. Viscosity grades for engine oils Us[...]

Fuels, coolants, lubricants etc. 608 Brake fluid G Warning! During vehicle operation, the boiling point of the brake fluid is continuously reduced through the absorption of moisture from the atmosphere. Under extremely strenuous operating conditions, this moisture content can lead to the formation of bubbles in the system, thus reducing the system?[...]

Fuels, coolants, lubricants etc. 609 These blends must also meet all other fuel requirements, such as resistance to spark knock, boiling range, vapor pressure, etc. Gasoline additives A major concern among engine manufacturers is carbon build-up caused by gasoline. Mercedes-Benz recommends only the use of quality gasoline containing additives that [...]

Fuels, coolants, lubricants etc. 610 anticorrosion/antifreeze (equivalent to freeze protection to approximately -35‡ [-37†]). If you use a solution that is more than 55% anticorrosion/antifreeze (freeze protection to approximately -49‡ [-45†]), the engine temperature will increase due to the lower heat transfer capability of the solution. T[...]

Fuels, coolants, lubricants etc. 611 Model Approximate freeze protection -35‡ (-37†) -49‡ (-45†) Cooling system (vehicles without rear passenger compartment climate control) S 450 4MATIC 44 7.8 US qt (7.4 l) 8.6 US qt (8.1 l) S 550 45 S 550 4MATIC 6.1 US qt (5.75 l) 6.7 US qt (6.3 l) Cooling system (vehicles with rear passenger compartment [...]

Fuels, coolants, lubricants etc. 612 Washer system and headlamp cleaning system G Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. X Use MB Windshield Washer Concentrate “MB SummerFit”. X Mix with water for temperat[...]

Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center. If you are interested in obtaining service literature for your vehicle, please contact an authorized Mercedes-Benz C[...]

Order no. 6515 2278 13 Part no. 221 584 25 82 Edition A 2009 É2215842582zËÍ 2215842582[...]