Miele esw 50x0-14 manual

Operating and installation instructions Built-in food warming drawer ESW 5088-14 ESW 50x0-14 ESW 50x0-29 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 241 640 e n-G B[...]

Guide to the appliance .............................................4 ESW 50x0-14 / ESW 5088-14 ..........................................4 ESW 50x0-29 ......................................................5 Control panel ......................................................6 Accessories supplied ...............................................7 Wa[...]

Safety instructions for installation ...................................3 1 Building-in dimensions ...........................................3 2 ESW 50x0-14 / ESW 5088-14 .........................................3 2 ESW 50x0-29 .....................................................3 5 Installing the appliance .......................................[...]

ESW 50x0-14 / ESW 5088-14 a Control panel b Anti-slip mat Guide to the appliance 4[...]

ESW 50x0-29 a Control panel b Anti-slip mat c Air vents d Rack Guide to the appliance 5[...]

Control panel Sensor switches s On/Off switch for the appliance X For selecting the function 6 For setting the temperature T For setting the duration Displays Functions: / For warming cups and glasses H For warming plates and dishes s For keeping food warm Temperature: ]^^^^ Duration: 1h 1 hour 2h 2 hours 3h 3 hours 4h 4 hours Guide to the applianc[...]

Accessories supplied The accessories supplied with your drawer as well as a range of optional ones are available to order (see "Optional accessories"). Rack For increasing the loading area Anti-slip mat For keeping crockery secure Guide to the appliance 7[...]

This appliance complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on the installation, s[...]

Technical safety ~ Before installation, check the appliance for visible signs of damage. Under no circumstances should you use it if it has been damaged. A damaged appliance is dangerous. ~ Before connecting the appliance to the mains supply, make sure that the connection data on the data plate (voltage and connected load) correspond with the mains[...]

~ During installation, maintenance and repair work, the appliance must be disconnected from the mains electricity supply. It is only completely isolated from the electricity supply when: – the mains fuse is disconnected, – the screw-out fuse is removed (in countries where this is applicable), – it is switched off at the wall socket and the pl[...]

~ Do not use the appliance to heat up the room. Due to the high temperatures radiated, objects near the appliance could catch fire. The life of the appliance could also be reduced. ~ Never replace the anti-slip mat supplied with the appliance with paper kitchen towel or similar. ~ Do not overload the drawer. The maximum load bearing capacity of the[...]

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation. Rather than just thr[...]

A display test is carried out for 10 seconds after the appliance has been installed and after a power cut. The fan comes on at the same time. The appliance cannot be used during this time. Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this[...]

The appliance switches itself off automatically after 2 hours. Metal components have a protective coating which may give off a slight smell when heated up for the first time. The smell and any vapours will dissipate after a short time, and do not indicate a faulty connection or appliance. Ensure that the kitchen is well ventilated whilst the applia[...]

Functions Use the X sensor to select the function you want. The applicable symbol lights up as follows: – / For warming cups and glasses. – H For warming plates and dishes – s For keeping food warm The last function selected is automatically activated the next time the drawer is switched on, and this is shown in the display. The appliance has[...]

Temperature settings Each function has its own temperature range. The factory-set recommended temperatures are printed in bold. The temperature can be altered in 5° steps by touching the 6 sensor. The last temperature selected is automatically activated the next time the drawer is switched on, and this is shown in the display. Temperature display [...]

Switching on ^ Open the drawer. ^ Switch the appliance on by touching the On/Off s sensor. ^ Touch the X sensor until the function required lights up in the display. ^ If you wish to alter the temperature, touch the 6 sensor until the LED for the temperature required lights up. The appliance is set in continuous operation mode. ^ If you wish to lim[...]

The quantity that can be loaded will depend to a great extent on the size and weight of your own crockery. Do not overload the drawer. The maximum load bearing capacity of the drawer is 25 kg. ESW 5070 - 14 / ESW 5080 - 14 / ESW 5088-14 The loading examples shown here are suggestions only. – 6 place settings: 6 dinner plates C 26 cm 6 soup bowls [...]

ESW 5070 -29 / ESW 5080 -29 The loading examples shown here are suggestions only. – 12 place settings: 12 dinner plates C 26 cm 12 soup bowls C 23cm 12 dessert plates C 19 cm 1 oval serving dish 32 cm 1 serving dish C 19 cm 1 serving dish C 16 cm 1 serving dish C 13 cm or alternatively: – 40 dinner plates C 26 cm – 60 soup bowls C 23 cm – 4[...]

This function is for keeping food warm that has just been cooked, i.e. food that is still hot. It is not for reheating food that has gone cold. – In order to ensure that the temperature does not drop below the minimum required for keeping food warm (65°C), select the s function only. – Pre-heat the drawer thoroughly for 15 minutes to ensure th[...]

Settings Food Container Container cover? Temperature for s setting Position in drawer Floor Rack* To warm bread - No ] ^ ^ ^ ^ xx To warm rolls - No ] ^ ^ ^ ^ xx Steak (rare) Plate No ] ^ ^ ^ ^ xx New potatoes Plate/dish Yes ^ ^ ] ^ ^ x Mashed potato Dish Yes ^ ^ ] ^ ^ x Roast meat Plate Yes ^ ^ ] ^ ^ x Meat in a sauce Dish Yes ^ ^ ^ ] ^ x Stew Dis[...]

– Distribute the crockery over the whole area of the drawer. Stacks of plates heat up more slowly than individual pieces of crockery. If large stacks of plates are unavoidable, place them at the front of the drawer. Use the rack (depending on model). – Do not place large serving dishes right up against the vents. They will cover the warm air ou[...]

Type of food preparation Container Container cover? Temperature for s setting Temperature for / setting Position in drawer Time in hours: minutes Floor Rack* Proving dough Bowl Yes, with plate ] ^ ^ ^ ^ x 0:30 Making yoghurt Yoghurt jars with lid - ^ ] ^ ^ ^ x 5:00 Defrosting berries Bowl/dish No ] ^ ^ ^ ^ x 0:50 Defrosting frozen vegetables Bowl N[...]

Low-temperature cooking Meat can be cooked at a constant low temperature over a longer period of time, with very tender results. It is possible to use the food warming drawer to cook meat at a low temperature. This is only suitable where the core temperature does not exceed 65°C. The meat must be seared first. Cooking duration/core temperature The[...]

Setting Type of meat Degree of doneness Temperature range in s setting Cooking container Roast beef Rare ] ^ ^ ^ ^ Roasting pan Roast beef Medium to well done ^ ^ ^ ^ ] Roasting pan Pork fillet Medium ] ^ ^ ^ ^ Plate Pork fillet Well done ] ^ ^ ^ ^ Roasting pan Rack of lamb Medium ] ^ ^ ^ ^ Plate Rack of lamb Well done ] ^ ^ ^ ^ Roasting pan Duck b[...]

General notes Always allow the appliance to cool down before cleaning. Under no circumstances use a steam cleaning appliance to clean this appliance. The steam could attack the electrical components and cause a short circuit. Only use domestic washing-up liquid to clean this appliance; commercial cleaning products are not suitable, and may damage t[...]

To avoid damaging the surface of your appliance, do not use: – cleaning agents containing soda, ammonia, acids or chlorides, – cleaning agents containing descaling agents, – abrasive cleaning agents, e.g. powder cleaners and cream cleaners, – solvent-based cleaning agents, – stainless steel cleaning agents, – dishwasher cleaner, – ove[...]

, Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Wh[...]

. . . crockery is not warm enough Check whether – the correct temperature setting has been selected. – the vents have been covered up. – the crockery has been allowed to heat up for a sufficiently long time. Various factors will affect how long the crockery will take to heat up, for example: – The material and thickness of the crockery – [...]

Rack For increasing the loading area. Anti-slip mat The anti-slip mat keeps crockery securely in place. E-Cloth (microfibre cloth) Removes finger marks and light soiling. A range of Miele branded accessories and cleaning products is available for your appliance from your local retailer, the Miele Spare Parts Department or via the internet on www.mi[...]

~ Before connecting the appliance to the mains supply make sure that the connection data on the data plate (voltage and connected load) correspond with the mains electricity supply, otherwise the appliance could be damaged. Consult a qualified electrician if in any doubt. ~ The socket and on-off switch should be easily accessible after the applianc[...]

ESW 50x0-14 / ESW 5088-14 Ovens a Ventilation cut-out required when combined with a pyrolytic oven * Appliances with glass front ** Appliances with metal front Microwave-combi ovens Building-in dimensions 32[...]

Steam ovens * Appliances with glass front ** Appliances with metal front Combi steam ovens a Ventilation cut-out required when combined with a combi steam oven Building-in dimensions 33[...]

Steam oven with pressure a Cut-out in base shelf for plumbing services b Filler panel AB 45-7 (optional accessory Coffee machines * Appliances with glass front ** Appliances with metal front Building-in dimensions 34[...]

ESW 50x0-29 Ovens a Ventilation cut-out required when combined with a pyrolytic oven * Appliances with glass front ** Appliances with metal front Microwave-combi ovens Building-in dimensions 35[...]

Steam ovens * Appliances with glass front ** Appliances with metal front Combi steam ovens a Ventilation cut-out required when combined with a combi steam oven Building-in dimensions 36[...]

Steam oven with pressure a Cut-out in base shelf for plumbing services b Filler panel AB 45-7 (optional accessory) * Appliances with glass front ** Appliances with metal front Coffee machines Building-in dimensions 37[...]

Check that the base of the drawer is clean and that it is level (use a spirit level). This is important for appliance to function correctly. To avoid the risk of injury wear protective gloves when installing the appliance in its housing unit. ^ Push the appliance into the housing unit as far the vapour strip, and align it. ^ Open the drawer, and us[...]

After building in the combination appliance, it may be necessary under certain circumstances to – align the front of the food warming drawer. – align the gap between the food warming drawer and the combination appliance. ^ Remove screws a from the left and right side of the drawer front. ^ Carefully lift the control panel out, taking care not t[...]

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplie[...]

Important U.K. This appliance is supplied for connection to a single phase 230-240 V 50 Hz supply with a 3-core cable. The wires in the mains lead are coloured in accordance with the following code: Green/yellow = earth Blue = neutral Brown = live WARNING: THIS APPLIANCE MUST BE EARTHED Non-rewireable plugs BS 1363 The fuse cover must be refitted w[...]

In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – the Miele Customer Contact Centre (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and ser[...]

43[...]

Alteration rights reserved/ 2809 M.-Nr. 07 241 640 / 03[...]