Miele W 1901 WPS manual

Operating instructions for Washing machine W 1901 WPS To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 482 650 e n-G B[...]

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Disposal of your old machine[...]

Caring for our environment .........................................2 Warning and Safety instructions .....................................6 Operating the washing machine .....................................1 3 Control panel .....................................................1 3 Display ..........................................................1[...]

Adding or removing laundry after a programme has started ................3 7 Safety lock .......................................................3 7 Detergent .......................................................3 8 The correct detergent ..............................................3 8 Water softeners .............................................[...]

Removing the transit bars ...........................................5 6 Re-fitting the transit bars ............................................5 8 Levelling the machine ..............................................5 9 Screwing out and adjusting the feet .................................5 9 Building under a worktop ...............................[...]

This washing machine conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the washing machine, please read these instructions carefully before using it for the first time. They contain important information on its installation, safety, u[...]

Safety with children ~ Children 8 years and older may use, clean or maintain the washing machine without supervision only if they have been shown how to do so in a safe way and understand the hazards involved. ~ Children under 8 years of age must be kept away from the machine unless they are constantly supervised. ~ The washing machine is not a toy[...]

Technical safety ~ Before setting up the washing machine, check it for any externally visible damage. Do not install or use a damaged washing machine. ~ Before connecting the washing machine, ensure that the connection data on the data plate (voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician[...]

~ Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician. ~ If the connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger. ~ The machine must be isolated[...]

Correct use ~ Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point. ~ Before using the washing machine for the first time, check that the transit bars at the rear of the machine ha[...]

~ If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. A special descaling agent is available to order from the Miele Spare Parts Department or via the in[...]

Accessories ~ Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guarantee, performance and product liability claims will be invalidated. Miele cannot be held liable for damage caused by non- compliance with these Warning and Safety instructions. Warning and Safety instructions 12[...]

Control panel a PC / Optical interface This is used by service technicians to run diagnostic checks on your machine and can also be used to update programming data in the future. b Start/Stop button For starting the programme selected and cancelling a programme once it has started. c Display with Y , X and OK buttons See the following page for more[...]

Display The display is operated using the Y , X and OK buttons. – Press the Y button to move up to the next line of text or to increase the value highlighted in the display. – Press the X button to move down to the next line of text or to decrease the value highlighted in the display. – Press the OK button to confirm the value highlighted in [...]

The following are selected via the display – wash temperature – final spin speed – the soak time – delay start – cancellation of a programme – safety lock The following are selected via Further programmes/Settings 4 – Maintenance programme – Dark garments – Down filled items – Outerwear – Proofing – Separate rinse – Starch[...]

Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened to prevent the risk of leaks during use. This washing machine has undergone a complete functional test at the factory and there will be some residual wat[...]

Reminder to remove transport bars , To avoid the risk of damage, the transport bars must be removed before the machine is used for the first time. See "Installation and connection" for instructions on how to do this. ^ After removing the transport bars (if this has not already been done by your fitter) press the OK button. Run your first [...]

Energy and water consumption – Water consumption and energy usage are determined by the size of the load. To make the most out of your machine, load the maximum dry load for the programme you are using. – When smaller amounts of laundry are washed, the automatic load recognition system will reduce the amount of water, time and energy used. This[...]

Brief instructions The headings numbered A , B , C ,... show the operating sequence and can be used as brief instructions. A Sort the laundry ^ Empty all pockets. , Foreign objects (e.g. nails, coins, paper clips, etc.) can cause damage to garments and components in the machine. ^ Badly soiled areas, stains etc. should be cleaned as soon as possibl[...]

B Switch on the washing machine C Load the drum ^ Press the Door button to open the drum door. ^ Unfold the laundry and load loosely into the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning. The most efficient use of energy and water is achieved when a full load is washed. [...]

Using the programme selector at the Further programmes/Settings 4 position ^ Turn the programme selector clockwise until the indicator light for Further programmes / Settings 4 comes on. ^ The following will appear in the display: Further programmes Settings ! ; Maintenance programme , ^ Use the Y or X button to scroll up and down the menu. ^ When [...]

F Select extra option(s) ^ Select any Extra options by either pressing the relevant button for the Extra, or by using the Further extras 4 button. Not all extra options are suitable for use with every programme. You can only select extra options which are compatible with the programme being used. See "Extra options" for more information. [...]

H Add detergent It is important to dispense the correct amount, because... . . . . . too little detergent results in: – Laundry not getting properly clean and with time it may become grey and hard to the touch. – Greasy particles clinging to the laundry. – Limescale deposits on the heater elements. . . . too much detergent results in: – Exc[...]

I Start the programme ^ Press the flashing Start/Stop button. If a delay start time has been selected, then this will count down in the display. At the end of the delay start time or immediately after the programme has started (if a delay start time has not been selected) the estimated programme duration will appear in the display. During the first[...]

Extra options are selected or deselected by pressing the appropriate button. Stains 4 There is a choice of various types of stains for achieving the optimum wash result with stain removal. Extra options will be added to the wash programme automatically, depending on the type of stain selected. With some stains, a tip about pre-treating the stain wi[...]

Pre-wash For laundry with large amounts of dirt e.g. dust, sand. Soak For heavily soiled items with protein stains. A duration of between 30 minutes and 6 hours can be chosen in 30 minute increments for the soak process. – To select the soak duration ^ Press the Further extras 4 button. Further extras 8 Soak ; 8 Rinse hold , ^ Press the X or Y bu[...]

The following extra options can be selected in addition to the programme: Stains 4 Short Water plus Extra quiet Extra rinse Pre-wash Soak Rinse hold Cottons ######## Minimum iron ######## Delicates ## # ### Woollens / ## Express 20 # 1) ### # Shirts ######## Denim ## # ### Automatic plus ## # Spin Maintenance programme Dark garments ## # ### Down f[...]

Final spin speed You can reduce the final spin speed. However, you cannot select a final spin speed higher than that shown in the chart above. Rinse and interim spin There is a spin after the main wash and between the rinses. A reduction in the final spin speed will also reduce the interim spin speed. In some programmes, an additional rinse is intr[...]

Programme chart 29 Cottons 9876 * cold to 90°C Max. load 7.0 kg Use for Cotton, linen or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Note The 60°/40°C programmes differ from the r / s programmes as follows: – Shorter programme duration – Longer temperature holding times – Higher energy consumption Where partic[...]

Programme chart 30 Shirts cold to 60°C Max. load 2.0 kg Notes – Pre-treat collars and cuffs if necessary. – Wash silk garments in the Silks / programme. Denim cold to 60°C Max. load 3.0 kg Notes – Wash denim inside out. – Denim often contains excess dye and may run during the first few washes. Wash light and dark coloured items separately[...]

Programme chart 31 Dark garments cold to 60°C Max. load 3.0 kg Use for Black and dark garments made from cotton or mixed fibre. Note Wash inside out. Down filled items cold to 60°C Max. load 2.0 kg Use for Jackets, sleeping bags, pillows and other down filled garments Note Please observe the instructions on the wash care label. Maintenance prog. [...]

Programme chart 32 Proofing 40°C Max. load 2.5 kg Use for Treating microfibre fabric, skiwear, and table linen made from mainly synthetic fibres to provide a water and stain resistant finish. Notes – The items should be freshly laundered and spun or dried before proofing. – For best results, the items should be heat-treated afterwards, either [...]

Washing The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted. 9 No bar under the symbol: = normal agitation 4 One bar under the symbol: = reduced agitation c Two bars under the symbol: = much reduced agitation / Hand wash (if no temper[...]

Main wash Rinses Spinning Water level Wash rhythm Water level Rinses Interim spin Final spin Programme sequence 34 Cottons d a ( 2-4 1)2) LL Minimum iron ( c e 2-3 3) LL Delicates e d e 3 – L Woollens /e f e 2 LL Express 20 d b d 1-3 3) LL Automatic plus ( abc e 2-3 3) LL Dark garments ( b d 3-4 3) LL Maintenance prog. ( a e 2– – Spin – –[...]

d = Low water level ( = Medium water level e = High water level a = Intensive rhythm b = Normal rhythm c = Gentle rhythm d = Sensitive rhythm e = Ultra sensitive rhythm f = Handwash rhythm This machine has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amo[...]

Cancelling a programme You can cancel a programme at any time after it has started. ^ Press the Start/Stop button. Options Cancel programme ; Activate safety lock , ^ Press the OK button. The suds will be pumped away. If you want to remove the laundry: ^ Press the Door button. If you want to select a different programme: ^ Switch the machine off wi[...]

Adding or removing laundry after a programme has started ^ Press the Door button to open the drum door. ^ Add or remove items. ^ Close the drum door. The programme will continue automatically. Please note: Once a programme has started the machine cannot recognise any adjustment to the load. For this reason, if laundry is added or removed after the [...]

The correct detergent All modern detergents produced for automatic washing machines are suitable. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads, but note that it may be impractical to reduce tablets for smaller loads. Some tablets do not dissolve as rapidly as others, and may not be s[...]

Detergent 39 Universal detergent Detergent for coloureds Detergent for delicates Specialist detergent* Proofing agent** Fabric conditioner Minimum iron X X – – – X Cottons X X – – – X Delicates X X X – – X Woollens / ––– X – X Express 20 1) XX – – – X Automatic plus X X – – – X Down filled items 1) –X X X – ?[...]

The right amount to dispense will depend on the following: – The soiling level of the laundry Lightly soiled No visible dirt or stains. Possibly slight body odour. Normally soiled Visibly dirty and/or just a few slight stains. Heavily soiled Visible dirt and stains and/or dried on soiling. – The size of the load – The water hardness level. Ch[...]

Fabric conditioners and liquid starch Fabric conditioner makes garments soft to handle and help prevent static cling when tumble drying. Starch stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed linen. Automatic dispensing of fabric conditioner or liquid starch to laundry at the end of a programme ^ Add the fabric conditi[...]

A range of Miele branded cleaning and conditioning agents is available to order from the Miele Spare Parts Department or via the internet at www.miele-shop.com. Cleaning the drum (Hygiene info) Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant smells to build up in the machine. The washing machine can be cl[...]

Cleaning the siphon and conditioner channel 1 . Remove the siphon from compartment § and rinse under hot running water. Clean the siphon tube in the same way. 2 . Replace the siphon. ^ Clean the fabric conditioner channel using a brush and hot water. If starching frequently, thoroughly clean the siphon, the siphon tube and the fabric conditioner c[...]

Cleaning the filter in the water inlet The washing machine has a filter to protect the water inlet valve. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more often if there are frequent interruptions to the external water supply. ^ First turn off the stopcock. ^ Unscrew the threaded union[...]

With the help of the following notes, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. , Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national saf[...]

One of the following fault messages appears in the display Fault message Possible cause Remedy 1) 2 Fault Water intake Open stopcock The water inlet is blocked or restricted. Check whether – the stopcock is opened properly. – the inlet hose is kinked. – the water pressure is too low. 2 Fault Check drainage system – The water outlet is block[...]

The following fault messages appear in the display at the end of the programme Fault message Possible cause Remedy Check detergent Excessive foam has built up during washing. Check: – the amount of detergent used. – Follow the instructions on the manufacturer's packaging and also take the degree of soiling of the laundry into account. Hygi[...]

General problems Problem Possible cause Remedy The machine shakes during the spin cycle. The machine feet are not level. Level the machine (see "Installation and connection"). The laundry has not been spun properly and is still wet. The machine detected an imbalance during the final spin and reduced the spin speed automatically. Include b[...]

An unsatisfactory wash result Problem Possible cause Remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. – Use a general purpose detergent containing a bleaching agent. – Pour stain removers into compartment j of the dispenser drawer a[...]

The door will not open Possible cause Remedy The machine is not connected to the electricity supply and/or is not switched on. Insert the plug in the socket and switch on, and/or switch the machine on with the K button. The safety lock has been activated. Deactivate the safety lock as described in "Changing the programme sequence - Safety lock[...]

Opening the drum door in the event of a blocked drain outlet and/or power failure ^ Switch the washing machine off. There is a lever behind the detergent drawer fascia panel. ^ Remove the lever. ^ Use it to open the access flap. Blocked drain outlet If the drain outlet is blocked, up to 25 litres of water will be retained in the machine. , Caution:[...]

Once the flow of water ceases: ^ Remove the drain filter completely. ^ Clean it thoroughly. ^ Remove any foreign objects (e.g. buttons, coins, etc.) and fluff from the filter housing. Turn the impeller by hand to check that it rotates freely. Any foreign object causing an obstruction should be removed. ^ Put the drain filter back in place and secur[...]

In the event of any faults which you cannot remedy yourself, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your machine, both of which are shown on the data plate visible above the porthole glass when the door is open. N.B. A[...]

Front view a Inlet hose with "Waterproof" system b Electricity supply cable c - f Flexible drain hose (with detachable swivel elbow) g Detergent dispenser drawer h Control panel i Drum door j Access to drain filter, drain pump and emergency release k Handle recesses for moving the machine l Four height adjustable feet Installation and con[...]

Rear view a Protruding lid for holding when moving the machine b Electricity supply cable c Inlet hose with "Waterproof" system d Drain hose e Transport clip for inlet and drain hoses f Safety cap for transit bars g Transport clip for inlet and drain hoses and for storing transit bars when not in use. Installation and connection 55[...]

Installation surface A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: ^ The machine must be level and securely positioned. ^ To avoid vibrations during spinning, the machine should not be installed on [...]

^ Using the spanner supplied, turn the left-hand transit bar 90°, then ^ withdraw the transit bar. ^ Turn the right-hand transit bar 90°, then ^ withdraw the transit bar. Installation and connection 57[...]

, To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed. ^ Plug the holes with the plastic caps as illustrated. ^ Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. , The machine must not be moved without the transit bars[...]

Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. All four feet are screwed [...]

Building under a worktop , The machine lid must not be removed. This washing machine can be pushed under a worktop with its lid in place, providing the worktop is high enough. Washer-dryer stack A Miele tumble dryer can be stacked with the washing machine. A WTV stacking kit is necessary which can be purchased from your Dealer, the Miele Spare Part[...]

The Miele Waterproof system The Miele Waterproof system protects the washing machine from water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit and the washing machine housing 3) the drain hose 1) Inlet hose – The inlet hose is fitted with an additional electrical safety valve which works like an aut[...]

Connection to the water supply , The plastic casing of the safety valve contains electrical components. The Waterproof system must only be connected to its own stopcock. It must not be connected to mixer taps or similar and must not be fitted in areas where there is the risk of water or other liquids reaching it. Do not get wet. The protective slee[...]

Maintenance and care If you intend to unscrew the Miele Waterproof system hose from the stopcock it is essential to disconnect the machine from the electricity supply first. Only use a Miele Waterproof system hose should you need a replacement. In order to protect the water inlet valve, the dirt filter in the water inlet valve connection must not b[...]

Connection to the drainage system The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull. If required, the drain hose can be extended to a[...]

Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Ensure power is not supplied to the appliance until after installation work has been carried out. The appliance is supplied with a mains cable[...]

66 Consumption data Load Consumption data Energy Water Duration Residual moisture in kWh in litres Cottons 90°C 7.0 kg 2.20 52 2 h 29 min 50% 60°C 7.0 kg 1.33 52 1 h 59 min 50% 60°C 3.5 kg 1.00 45 1 h 59 min 50% r * 7.0 kg 0.82 52 2h5 9m i n 50% r * 3.5 kg 0.82 45 2 h 59 min 50% 40°C 7.0 kg 0.84 67 2 h 29 min 50% 40°C 3.5 kg 0.73 45 2 h 29 min[...]

Height 850 mm Width 595 mm Depth 656 mm Depth with door open 1092 mm Height for building under 850 mm Width for building under 600 mm Weight 99 kg Capacity 7 kg dry laundry Voltage See data plate Connected load See data plate Fuse rating See data plate Consumption data See "Consumption data" Minimum water flow pressure 100 kPa (1 bar) Max[...]

The Settings menu can be used to alter the machine's electronics to suit changing requirements. Settings can be altered at any time. To open the Settings menu ^ Switch on the machine. ^ Turn the programme selector to Further programmes/Settings 4 . The following will appear in the display: Further programmes Settings ! ; Maintenance programme [...]

Time First select either a 24 hour or 12 hour clock. Then set the current time of day. Clock format ^ Use the X or Y button to highlight the clock format you want and confirm your selection with the OK button. Set the time of day Select the Set the time of day sub- menu. Use the X or Y button to set the time and confirm your selection with the OK b[...]

Lock code The code prevents the washing machine being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. To activate the code You will be prompted to enter a code. The code is 125 and cannot be altered. ^ Use the Y and X bu[...]

Standby display To save energy, the display goes out and the indicator light for the Start/ Stop button starts flashing slowly. The display will always go out, – if a programme is not selected within 10 minutes of the washing machine being switched on. – 10 minutes after the end of a programme. Pressing one of the buttons switches the display b[...]

Miele washing machines offer perfect care for your laundry and feature a wide range of special programmes designed to suit the fabric being washed. Miele have also developed a range of specialist CareCollection detergents and conditioning products to offer you a complete package for cleaning and caring for your laundry. The Miele CareCollection det[...]

"UltraWhite" detergent This multi-purpose powder detergent has excellent stain removal properties and is suitable for white and light coloured laundry as well as heavily soiled coloured items. "UltraColor" detergent for coloured garments This liquid detergent is particularly suitable for cleaning coloured and dark garments. The [...]

74[...]

75[...]

Alteration rights reserved/4412/W 1901 WPS M.-Nr. 09 482 650 / 00[...]