-
Página 1
THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .multiquip.com OPERA TION AND PAR TS MANUAL SlabSaver SERIES MODEL FCG1-6HA CONCRETE SA W (HONDA GX200UQXC9 GASOLINE ENGINE) Re vision #1 (03/19/10) P/N: 38256[...]
-
Página 2
P A GE 2 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm. by power sanding, sawing, grinding, drilling and other construction activities contains chemicals k[...]
-
Página 3
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay , granite and numerous other minerals and rocks. Re[...]
-
Página 4
P A GE 4 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) T ABLE OF CONTENTS Specifications and par t numbers are subject to change without notice. FCG16HA SlabSaver Concrete Saw Proposition 65 W ar ning ............................................. 2 Silicosis/Respirator y W a r nings .................................. 3[...]
-
Página 5
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 5 SPECIFICA TIONS * Nominal Mass: Mass without blade , all fluid tanks empty , an y optional par ts remov ed. ** Maximum Operating Mass: Includes blade, all fluid tanks full, any necessary components installed. *** Hand/Arm Vibration (at handle) results with FCG16HA Saw cutt[...]
-
Página 6
P A GE 6 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) DIMENSIONS Figure 1. FCG16HA Concrete Saw Dimensions Side View Fr ont View s n o i s n e m i D w a S e t e r c n o C 1 G C F . 3 e l b a T R E T T E L E C N E R E F E R N O I T P I R C S E D ) M C ( N O I S N E M I D A ) d e s i a R y l l u F s r a B e l d n a H ( [...]
-
Página 7
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 7 Safety precautions should be followed at all times when operating this equipment. F ailure to read, understand and comply with the Safety Messages and Operating Instructions could result in injury to yourself and others. FOR Y OUR SAFETY AND THE SAFETY OF O THERS! This Own[...]
-
Página 8
P A GE 8 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) SAFETY MESSAGE ALERT SYMBOLS Accidental Starting AL W A YS place the ON/OFF s witch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine gov er nor . P ersonal injur y and damage to the engine o[...]
-
Página 9
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 9 RULES FOR SAFE OPERA TION The following safety guidelines should always be used when operating the FCG16HA Sa w . SAFETY ■ DO NO T operate or ser vice this equipment bef ore reading this entire manual . T h e manual must be kept available and accessible to the operator .[...]
-
Página 10
P A GE 10 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) RULES FOR SAFE OPERA TION General Safety ■ AL W A YS read, understand, and f ollow procedures in Operator's Manual before attempting to operate equipment. ■ AL W A YS be sure the operator is f amiliar with proper saf ety precautions and operating techniqu[...]
-
Página 11
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 11 RULES FOR SAFE OPERA TION Maintenance Safety NEVER lubricate components or attempt service on a running machine. AL W A YS allow the machine a proper amount of time to cool before servicing. Keep the machinery in[...]
-
Página 12
P A GE 12 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) Intended Use Operate the FCG16HA Sa w , tools and components in accordance with the manufacturer's instructions. Use of any other tools for stated operation is considered contrary to designated use. The r isk of such use lies entirely with the user . The manu[...]
-
Página 13
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 13 NOTES[...]
-
Página 14
P A GE 14 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) CONTROLS & COMPONENTS COMPONENTS Figure 3. FCG16HA Concrete Saw[...]
-
Página 15
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 15 Figures 3 shows the location of the basic controls or components, f or the FCG16HA Concrete Saw . Listed below is a brief explanation of each control or component 1 . Hand Grips/Handlebar – When operating the saw , place both hands on each grip to maneuver the sa w . 2.[...]
-
Página 16
P A GE 16 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) Figure 4. Engine Controls and Components INITIAL SER VICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. 1 [...]
-
Página 17
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 17 Figure 7. Pulley Alignment 3 . Chec k V -belt tension by using a tension meter (6.0 - 9.0 lbs.) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/8" (10 mm) to 1/2" (13 mm). See Figure 8. GUARDS, CO[...]
-
Página 18
P A GE 18 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) GUARDS, COVERS AND V -BEL TS Figure 8. V -Belt T ension Check 4. DO NO T ov er or under tighten the V -belt. Sev ere damage can occur to the saw and engine crank shaft if the belt is over-tensioned. A decrease of power to the blade and poor performance will result[...]
-
Página 19
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 19 F ailure to thoroughly inspect the diamond blade (Figure 11) for operational safety could result in damage to the blade , the sa w , and may cause injury to the user or others in the operating area. All damaged blades must be discarded. Figure 11. Diamond Blade 1 . Stress[...]
-
Página 20
P A GE 20 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) 1. Blade Guard - Pivot the blade guard front cover all the way bac k. The guard tension spr ing will keep the front co ver in position. 2. Blade Hex Nut - Unscrew the blade shaft nut (right side loosens clockwise and tightens counter-clockwise while the left side [...]
-
Página 21
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 21 BLADE PLACEMENT 5. Inner Flange (Collar) - This flange is fix ed upon the b lade shaft. The inside surf ace of the flange must be free of debris and permit a tight closure on the surface of the blade. Figure 12. Diamond Blade Placement The following steps should be accomp[...]
-
Página 22
P A GE 22 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) T o adjust the b lade to the desired cutting depth, perf or m the following steps: 1 . Mount the desired diamond blade on the shaft and secure as instructed in the Blade Removal and Replacement section. 2 . While holding the handle bars to support the weight of th[...]
-
Página 23
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 23 Before Starting 1. Read safety instructions at the beginning of manual. 2 . Clean the saw , removing dir t and dust, par ticular ly the engine cooling air inlet, carb uretor and air cleaner . 3 . Chec k the air filter f or dir t and dust. If air filter is dir ty , replace[...]
-
Página 24
P A GE 24 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) OPERA TION 2. Place the fuel valve lever (Figure 19) to the "ON" position. NEVER place hands or feet inside the belt guard or blade guard while the engine is running. AL W A YS shut the engine do wn bef ore performing any kind of maintenance service on t[...]
-
Página 25
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 25 6 . Grasp the star ter gr ip (Figure 22) and slowly pull it out. The resistance becomes the hardest at a certain position, corre- sponding to the compression point. Pull the starter grip briskly and smoothly for starting. Figure 22. Starter Grip OPERA TION DO NOT pull the[...]
-
Página 26
P A GE 26 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) OPERA TION AL W A YS k eep clear of r otating or mo ving par ts while operating this equipment. 11 . When blade has reached full cutting depth, slowly walk behind the saw at a rate that will allow the engine to operate without losing optimum RPM. 12 . When the end[...]
-
Página 27
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 27 OPERA TION Restarting After Intervention If cutting is interrupted where the engine stops or is turned off while the blade is still in the cut: a. T ur n engine Shutdown s witch (ne xt to the handle lock) to the "OFF" position. b. Raise the blade out of the cut [...]
-
Página 28
P A GE 28 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. MAINTENANCE AL W A YS allo w the engine to cool bef ore servicing. NEVER attempt any maintenance work on a hot! engine. ■ REMO VI[...]
-
Página 29
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 29 MAINTENANCE Engine Oil Change Drain the used oil while the engine is warm by the following: Refer to Figure 27. 1 . Place an oil pan or suitable container below the engine drain plug to catch the used oil. 2 . Remove the filler cap/dipstick and the drain plug. 3 . Drain t[...]
-
Página 30
P A GE 30 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) TROUBLESHOOTING (SA W) G N I T O O H S E L B U O R T E D A L B . 6 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S , g n i t t u c s p o t s r o s w o l s e d a l B e d a l b n o s n i a m e r l l i t s g n i e b l a i r e t a m e h t r o f d[...]
-
Página 31
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 31 TROUBLESHOOTING (ENGINE) ) E N I G N E ( G N I T O O H S E L B U O R T . 7 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S t u b , e l b a l i a v a s i l e u f " , t r a t s o t t l u c i f f i D . " g u l p k r a p s t a K R A P S o n ? g n i g[...]
-
Página 32
P A GE 32 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) TROUBLESHOOTING (ENGINE) ) D E U N I T N O C , E N I G N E ( G N I T O O H S E L B U O R T . 7 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S r e p o r p s i n o i s s e r p m o c " r e w o p n i k a e W " . e r i f s i m t o n s e o d d[...]
-
Página 33
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 33 NOTES[...]
-
Página 34
P A GE 34 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) EXPLANA TION OF CODE IN REMARKS COLUMN The f ollowing section e xplains the diff erent symbols and remarks used in the P ar ts section of this manual. Use the help numbers f ound on the back page of the manual if there are any questions . SAMPLE P AR TS LIST NO . [...]
-
Página 35
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 35 FCG16HA CONCRETE SA W 1 T O 3 UNITS WITH HOND A GX200QXC9 ENGINE 1 to 3 Units Qty . ........ P/N .............................. D escription 2 ............ 16052 .......................... BEL T 4 ............ 25407 .......................... WHEELS 2 ............ 15028 .[...]
-
Página 36
P A GE 36 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) DECAL LOCA T OR DECAL LOCA TOR R O T A T I O N R O T A T I O N D C D C B B A A “LUBRICA TION” “HOT” “BEL T DRIVE” “CHECK” P/N 25491 MODEL SERIAL NO. California - Proposition 65 Warning Engine exhaust and some of its byproducts are known to the Stat[...]
-
Página 37
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 37 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 38231 D ECAL, SLAB SA VER LARGE 1 2 38213 DECAL, MQ LOGO 3.0 X 3-3/4 2 3 36099 DECAL, SAFETY CLO THING ISO BLUE ............................. 1 .......... SAFETY ITEM 4 13118 DECAL, PO WDER COA TED 1 5 SERIAL NUMBER PLA TE ....[...]
-
Página 38
P A GE 38 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) GUARDS ASSY . GU ARDS ASSY . 3 5 10 11 12 4 1 2 2 3 4 9 8 17 16 12 13 14 14 15 15 16 16 7 12 6 5[...]
-
Página 39
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 39 GUARDS ASSY GU ARDS ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 25387 G UAR D , B E L T ...................................................... 1 ......... SAFETY ITEM 2 4196 SCREW , HHC 3/8 - 16 X 0.75 3 3 0166 A W ASHER, LOCK 3/8 MED 3 4 10136 WAS HER, FLA T 3/8 [...]
-
Página 40
P A GE 40 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) GUIDES ASSY . GUIDES ASSY .[...]
-
Página 41
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 41 GUIDES ASSY . GUIDES ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 # 20473 SCREW , HHC 3/8 - 16 X 3 FULL THRD 1 2 # 1456 N U T , HEX FINISH 3/8 - 16 4 3 # 1007 N U T , HEX JAM 3/8 - 16 4 4 # 25449 WHEEL, GUIDE 3.5 OD X .41 ID FCG 1 5 # 10133 N U T , NYLOC 3/8 - 16 1[...]
-
Página 42
P A GE 42 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) UNDERCARRIAGE ASSY . 8 9 4 5 6 7 3 3 11 12 2 2 UNDERCARRIAGE ASSEMBL Y 2 10 13 14 3 1 UNDER CARRIA GE ASSY .[...]
-
Página 43
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 43 UNDERCARRIAGE ASSY . UNDER CARRIA GE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 25368 BAR, PIV O T SHAFT 1 2 25407 WHEEL, 5 X .625 X 1.5 BALL BRG 4 3 15028 COLLAR, SET 5/8 DIA 4 4 25379 BEARING, 5/8 FLANGE UHMW 2 5 9154 SCREW , HHC 3/8 - 16 X 1-3/4 1 6 2064 ROD E[...]
-
Página 44
P A GE 44 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) HANDLE & DEPTH ADJUSTER ASSY . HANDLE & DEPTH ADJUSTER ASSY . 13 14 1 2 15 3 10 11 12 4 5 7 8 9 6[...]
-
Página 45
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 45 HANDLE & DEPTH ADJUSTER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 25357 FRAME 1 2 25419 HANDLEBAR 1 3 15503 KNOB, COMFORT GRIP 1 4 4403 KNOB, SHIFT 1 5 25448 DEPTH ADJUST DISK 1 6 25480 SCREW PLUNGER, 1/4 - 20 X 17/32 1 7 25446 RO D , DEPTH ST OP 1 8 2199 NU[...]
-
Página 46
P A GE 46 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) ENGINE & BLADE DRIVE ASSY . ENGINE & BLADE DRIVE ASSY . 14 19 20 4 4 3 3 2 2 18 18 15 21 16 17 11 10 12 13 5 6 7 1 8 9 22 NOTES: SWITCH MOUNTING HARDW ARE IS INCLUDED WITH SWITCH. 1 1 23[...]
-
Página 47
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 47 ENGINE & BLADE DRIVE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 25378 ENGINE, 6.5 HP HOND A GX200UQXC9 (SHO WN) 1 2 0161 D NUT , HEX FINISH 5/16 - 18 4 3 0161 C W ASHER, LOCK 5/16 MED 4 4 0300 B W ASHER, FLA T 5/16 4 5 25356 PULLEY , 13V412SH 1 6 25417 BUSHIN[...]
-
Página 48
P A GE 48 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) AIR CLEANER (CYCLONE) ASSY . HONDA GX200QXC9 — AIR CLEANER (CYCLONE) ASSY .[...]
-
Página 49
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 49 AIR CLEANER (CYCLONE) ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16271ZE1000 GASKET , ELBO W 1 2 17210ZE1505 ELEMENT , AIR CLEANER (DU AL) ......................... 1 ............. INCLUDES ITEMS W/ * 3 * 17218ZE1821 FI L TER (OUTER) 1 4 * 17219733010 GASKET , AI[...]
-
Página 50
P A GE 50 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) CAMSHAFT ASSY . HONDA GX200QXC9 — CAMSHAFT ASSY .[...]
-
Página 51
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 51 CAMSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 12209ZH8003 SEAL, V AL VE STEM 1 2 14100ZL0000 CAMSHAFT ASSEMBL Y ........................................ 1 ............. INCLUDES ITEM W/ * 3 14410ZE1010 ROD , PUSH 2 4 14431ZE1000 ARM, V AL VE ROCKER 2 5 1445[...]
-
Página 52
P A GE 52 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) CARBURET OR ASSY . HONDA GX200QXC9 — CARBURETOR ASSY .[...]
-
Página 53
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 53 CARBURET OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * 16010ZE1812 GASKET SET 1 2 * 16011ZE0005 V A L VE SE T , F L OA T 1 3 * 16013ZE0005 FL OA T SE T 1 4 * 16015ZE0831 CHAMBER SET , FLO A T 1 5 * 16016ZH7W01 SCREW SET 1 6 * 16024ZE1811 SCREW SET , DRAIN 1 7 *[...]
-
Página 54
P A GE 54 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) CONTR OL ASSY . HONDA GX200QXC9 — CONTROL ASSY .[...]
-
Página 55
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 55 CONTR OL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 3 16500ZH8853 CONTROL ASSEMBL Y (CYCLONE) ...................... 1 ............. INCLUDES ITEMS W/ * 4 16551ZL0000 ARM, GO VERNOR 1 5 16555ZE1000 ROD , GO VERNOR 1 6 16561ZL0000 SPRING, GO VERNOR 1 7 16562ZE1020 S[...]
-
Página 56
P A GE 56 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) CRANKCASE CO VER ASSY . HONDA GX200QXC9 — CRANKCASE COVER ASSY .[...]
-
Página 57
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 57 CRANKCASE CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 11300ZE1641 CO VER ASSEMBL Y , CRANKCASE (U- TYPE) ...... 1 ............. INCLUDES ITEMS W/ * 3 11381ZH8801 GASKET , CASE CO VER (NON- ASBEST OS) ....... 1 ............. USE UP T O ENGINE ...............[...]
-
Página 58
P A GE 58 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) CRANKSHAFT ASSY . HONDA GX200QXC9 — CRANKSHAFT ASSY .[...]
-
Página 59
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 59 CRANKSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 13310ZL0600 CRANKSHAFT (Q- TYPE) 1 8 90745ZE1600 KE Y 4 . 78 X 4.78 X38 1 HONDA GX200QXC9 — CRANKSHAFT ASSY .[...]
-
Página 60
P A GE 60 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) CYLINDER BARREL ASSY . HONDA GX200QXC9 — CYLINDER BARREL ASSY .[...]
-
Página 61
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 61 CYLINDER BARREL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 12000ZL0810 CYLINDER ASSEMBL Y (OIL ALER T) .................... 1 ............. INCLUDES ITEMS W/ * 2 15510ZE1033 SWITCH ASSEMBL Y , OIL LEVEL 1 3 16506ZL0000 G O VERNOR ASSEMBL Y 1 4 16531ZE1000 SLIDER,[...]
-
Página 62
P A GE 62 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) CYLINDER HEAD ASSY . HONDA GX200QXC9 — CYLINDER HEAD ASSY .[...]
-
Página 63
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 63 CYLINDER HEAD ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * 12204ZE1306 GUIDE, V AL VE OS (OPTIONAL) 1 2 * 12205ZE1315 GUIDE, EXHA UST V AL VE OS (OPTIONAL) 1 3 12210ZL0000 CYLINDER HEAD ................................................... 1 ............. INCLUDES [...]
-
Página 64
P A GE 64 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) F AN CO VER ASSY . HONDA GX200QXC9 — F AN COVER ASSY .[...]
-
Página 65
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 65 F AN CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 19610ZL0000ZB CO VER, F AN *R8* BRIGHT RED 1 3 19611ZH8810 P L A TE, SIDE (OIL ALER T) 1 6 19613ZE1010 CLAMP , CORD 1 7 19630ZH8000 SHROUD 1 8 32197ZH8003 SUB- HARNESS 1 9 36100ZH7003 SWITCH ASSEMBL Y , ENGIN[...]
-
Página 66
P A GE 66 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) FL YWHEEL ASSY . HONDA GX200QXC9 — FL YWHEEL ASSY .[...]
-
Página 67
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 67 FL YWHEEL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 13331357000 K E Y , SPECIAL WOODR UFF 25 X18 1 2 19511ZE1000 F AN, COOLING 1 4 28451ZL0000 PULLEY , ST AR TER 1 5 31100ZE7010 FL YWHEEL, ST AND ARD 1 7 90201878003 N U T , SPECIAL 14MM 1 HONDA GX200QXC9 — FL [...]
-
Página 68
P A GE 68 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) FUEL T ANK ASSY . HONDA GX200QXC9 — FUEL T ANK ASSY .[...]
-
Página 69
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 69 FUEL T ANK ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16854ZH8000 R UBBER, SUPPOR TER 107MM 1 2 16955ZE1000 JOINT , FUEL T ANK 1 3 17510ZE1020ZA T ANK, FUEL *NH31* MCKINLEY WHITE 1 4 17620ZH7023 C A P , FUEL FILLER ................................................[...]
-
Página 70
P A GE 70 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) IGNITION COIL ASSY . HONDA GX200QXC9 — IGNITION COIL ASSY .[...]
-
Página 71
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 71 IGNITION COIL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 30500ZE1033 COIL ASSEMBL Y , IGNITION 1 2 30700ZE1013 CAP ASSEMBL Y , NOISE SUPPRESSOR 1 10 90121952000 B O L T , FLANGE 6 X25 2 HONDA GX200QXC9 — IGNITION COIL ASSY .[...]
-
Página 72
P A GE 72 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) MUFFLER ASSY . HONDA GX200QXC9 — MUFFLER ASSY .[...]
-
Página 73
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 73 MUFFLER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 18310ZL0000 MUFFLER 1 2 18315ZE1000 ST A Y , MUFFLER 1 3 18320ZF1H51 PRO TECT OR, MUFFLER 1 4 18331883810 C A P , MUFFLER 1 6 18361ZL0000 NETTING, WIRE FLANGE 1 7 18381ZH8800 GASKET , MUFFLER 1 8 90016ZE1000 BO L[...]
-
Página 74
P A GE 74 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) PIST ON ASSY . HONDA GX200QXC9 — PISTON ASSY .[...]
-
Página 75
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 75 PIST ON ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 13010ZL0003 RING SET , PIST ON (ST AND ARD) 1 1 13011ZL0003 RING SET , PIST ON (OS 0.25) 1 1 13012ZL0003 RING SET , PIST ON (OS 0.50) 1 1 13013ZL0003 RING SET , PIST ON (0.75) 1 2 13101ZL0000 PIST ON (ST AND ARD)[...]
-
Página 76
P A GE 76 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) RECOIL ST AR TER ASSY . HONDA GX200QXC9 — RECOIL ST ARTER ASSY .[...]
-
Página 77
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 77 RECOIL ST AR TER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 28400ZH8013ZA ST AR TER ASSY ., RECOIL *R8* BRIGHT RED ...... 1 ............. INCLUDES ITEMS W/ * 2 28405ZL0000ZB SP A CER, RECOIL ST AR TER MOUNTING 1 *R8* BRIGHT RED 3 * 28410ZH8003ZA CASE, RECOIL ST A[...]
-
Página 78
P A GE 78 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) HONDA GX200QXC9 — GASKET KIT ASSY . GASKET KIT ASSY . NO ILLUSTRA TION A V AILABLE[...]
-
Página 79
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 79 GASKET KIT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 06111ZL0000 GASKET KIT .......................................................... 1 ............. INCLUDES ITEMS W/ * 1 * 11381ZL0000 GASKET , CASE CO VER 1 2 * 12251ZL0003 GASKET , CYLINDER HEAD 1 3 * 12391ZE10[...]
-
Página 80
P A GE 80 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) LABELS ASSY . HONDA GX200QXC9 — LABELS ASSY .[...]
-
Página 81
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 81 LABELS ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 87521ZL0010 EMBLEM 1 3 87522ZH9000 LABEL, CA UTION 1 4 87528ZE1810 MARK, CHOKE 1 5 87532ZH8810 MARK, OIL ALERT (E) 1 6 87534ZE1841 LABEL, AIR CLEANER CA UTION 1 7 87535ZE1840 MARK, AIR CLEANER SALES POINT 1 8 8921[...]
-
Página 82
P A GE 82 — FCG16HA SA W • OPERA TION AND P AR TS MANU AL — REV . #1 (03/19/10) P A YMENT TERM S T erms of payment for parts are net 3 0 days. FREIGHT P OLIC Y All parts orders will be shipped collect or prepaid with the c harges ad ded to th e invoice. All shipments are F .O .B. point of origin. Multiquip’ s responsibilit y ceases when a s[...]
-
Página 83
FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 83 NOTES[...]
-
Página 84
OPERA TION AND PAR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2010, MUL TIQUIP INC. Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without w ritten per mission. All other trademar ks are th[...]