NEC LCD1560NX manual

MultiSync LCD1560NX User’ s Manual[...]

English English-1 Dec laration Declaration of the Man ufacturer T O PREVENT FIRE OR SHOCK HAZARDS, DO NO T EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO , DO NOT USE THIS UNIT ’ S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT A CLE OR O THER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED . REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH V OL T[...]

English-2 For the Customer to use in U .S.A. or Canada Canadian Depar tment of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interf erence-Causing Equipment Regulations. Cet appareil num é rique de la classe B respecte toutes les exigences du R è glement sur le mat é riel brouiller[...]

English English-3 Quic k Star t T o attach the MultiSync LCD monitor to your system, f ollow these instructions: 1. T ur n off the power to y our computer . 2. For the PC or MA C with DVI digital output: Connect the D VI signal cable (not included) to the connector of the display card in your system ( Figure A.1 ). Tighten all screws. For the PC wi[...]

English-4 Figure C.1 Input2 (D VI) Input1 (D-Sub) Input2 (D VI) Input1 (D-Sub) Cable co ver Figure A.1 Figure B.1 Macintosh Cab le Adapter (not included) Figure A.2 Figure C.2 Figure C.3[...]

English English-5 Raise and Lower Monitor Screen The monitor may be r aised or lowered. T o raise or lower screen, place hands on each side of the monitor and lift or lo wer to the desired height ( Figure RL.1 ). Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired ( Figure TS.1 ). Remove Monitor Stand f or Mou[...]

English-6 4. Remov e the hinge cov er ( Figure R.1 and Figure R.2 ). 5. Remov e the 4 screws connecting the monitor to the stand and lift off the stand assembly ( Figure R.3 ) the monitor is now ready for mounting in an alternate manner . 6. Connect the AC cord, signal cab le and audio cable to the back of the monitor ( Figure R.4 ). 7. Rev erse th[...]

English English-7 NO TE: This LCD monitor is designed for use with a fle xible arm. Please use the attached scre ws (4pcs) when mounting. T o meet the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor . The LCD monitor shall only be used with an approv[...]

English-8 Contr ols OSM (On-Screen-Manager) Contr ols The OSM controls on the front of the monitor function as follo ws: T o access OSM press any of the control buttons ( < , > , - , + , EXIT ). T o change signal input, press the SELECT button. NO TE: OSM must be closed in order to change signal input. NO TE: When RESET is pressed in the main[...]

English English-9 FINE Improv es f ocus, clarity and image stability by increasing or decreasing this setting. Should the “ Auto Adjust function ” and the “ H.Siz e ” function do not giv e you a satisf actor y picture setting, a fine tuning can be perf or med using the “ Fine ” function. It improv es focus, clearity and image stability [...]

English-10 Inf ormation DISPLA Y MODE Indicates the current display resolution and frequency setting of the monitor . MONIT OR INFO . Indicates the model and serial numbers of your monitor . OSM W arning OSM W arning menus disappear with Exit button. NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on [...]

English English-11 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLO WING WHEN SETTING UP AND USING THE MUL TISYNC LCD COLOUR MONITOR: • DO NO T OPEN THE MONITOR. There are no user ser viceable par ts inside and opening or removing cov ers may e xpose you to dangerous shock hazards or other risks. R[...]

English-12 Specifications Monitor Specifications MultiSync LCD1560NX Monitor Notes LCD Module Diagonal: 38 cm/15 inches Active matrix; thin film transistor (TFT) Viewab le Image Size: 38 cm/15 inches liquid cr ystal display (LCD); 0.297 mm Native Resolution (Pix el Count): 1024 x 768 dot pitch; 250cd/m 2 white luminence, typical; 350:1 contrast r a[...]

English English-13 Features OSM (On-Screen Manager) Controls: Allo w you to quickly and easily adjust all elements of y our screen image via simple to use on-screen menus. No T ouch Auto Adjust (Analog input onl y): No T ouch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. ErgoDesign ® Features: Enhance human [...]

English-14 T r oubleshooting No picture • The signal cable should be completely connected to the displa y card/computer . • The displa y card should be completely seated in its slot. • Check the V acation Switch should be in the ON Position. F ront power Switch and computer po wer switch should be in the ON position. • Check to mak e sure t[...]

English English-15 Congratulations! Y ou hav e just purchased a TCO ’ 99 approv ed and labeled product! Y our choice has provided you with a product de veloped for professional use . Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Wh[...]