Nilfisk E 130.2-10 X-TRA manual

Nil sk E 130.2 Nil sk E 140.2 Nil sk E 145.2 User Manual[...]

Cop yright © 2011 Nilfisk, Division of Nilfisk-Advance A/S[...]

3 Inde x 1 Saf ety precautions and warnings ............................................. 3 2 Description ............................................................................... 4 3 Bef ore you start using your pressure washer ........................... 5 4 Operating y our pressure washer .............................................. 6 5 [...]

4 Extension cables should be of a watertight constr uction and comply with the below-men- tioned requirements f or length and cable dimensions . 1.0 mm² max. 12.5 m 1.5 mm² max. 20 m 2.5 mm² max. 30 m  Cable connections should be kept dry and off the ground. Mains power connection The f ollowing should be ob- ser v ed when connecting the high[...]

5 2.2 Operation elements and model survey See illustration at the end of this manual. 1 Star t/stop switch 2 W ater inlet (with fi lter) 3 High pressure connection (only models without hose reel) 4 High pressure hose 5 Electric cable 6 Click & Clean spr a y lance 7 Spra y gun with loc k 8 Click & Clean T or nado ® PR nozzle 9 Click & [...]

6 3.3 Mounting of quick coupling 1. Screw the quic k coupling (16) tight on to the water inlet (2). Note: The inlet fi lter must al- wa ys be fi tted in the w ater inlet pipe to fi lter out sand, lime stone and other impurities as these will damage the pump valv es. Caution: F ailure to fi t the fi lter will inv alidate the guarantee.  4 Op[...]

7 4.2 Mounting of spray lance and Click & Clean nozzles  2. Attach the nozzle. W arning: When attaching the Click & Clean nozzles, the pawl on the side of the spra y lance should come out again. Note: The T or- nado ® PR noz- zle and the f oam spra y er f eature a s wiv el lock, which must be positioned in the hole in the Click & Cl[...]

8 4.5 Star t and stop of the ma- chine (when connected to a water supply) The spra y lance is aff ected by a thrust during opera- tion - theref ore alwa ys hold it fi rmly with both hands. IMPOR- T ANT : P oint the nozzle at the ground. 1. Check that the machine is in upright position. NO TE: Do not place the ma- chine in high grass! 2. Release th[...]

9 4.7 Pressure regulation on the T ORNADO ® PR- nozzle The pressure can be regulated on the TORNADO ® PR nozzle. 4.8 Stationary use If mounting a special wall hook (not standard), the pressure washer can be used as a sta- tionar y solution meaning that it can be operated while hanging on the wall. Only mount the wall hook on a sturdy wall. Adjust[...]

10 5 Fields of application and w orking methods 5.1 General Effi cient high presure cleaning is achie v ed by f ollowing a fe w guide- lines, combined with y our own personal e xper ience of specifi c cleaning tasks. Accessories and detergents, when correctly cho- sen, can increase the effi ciency of y our pressure washer . Here is some basic in[...]

11 5.2 T ypical fi elds of application Below y ou will fi nd a description of a lot of cleaning tasks which can be solved b y a pressure washer from Nilfi sk in association with accessories and detergents. T ask Accessories ‘Click & Clean’ Cleaning method Car Car nozzle, auto brush, underchassis nozzle, F oam spra y er , Car Combi Cleane[...]

12  6 After using y our pressure washer 6.2 Winding up of electric cable and high pressure hose carefully up . 1. Wind up the electric cable on the appropriate hooks. Built- in clip f or good holding (1). The low er hook can be turned to release the electr ic cable . 2. The high pressure washer comes in two models: A) with hook f or storage of h[...]

13 W ARNING! Alwa ys disconnect the electrical plug from the sock et prior to maintenance or cleaning. T o ensure a long and problem free working life , please tak e the f ollowing advice:  Wash out w ater hose, high pressure hose, spra y lance and accessories before mounting.  Clean the connectors of dust and sand. Make sure that no sand or [...]

14 8 T r ouble-shooting T o av oid unnecessary disappointments, you should chec k the f ollowing bef ore contacting the Nilfi sk ser vice organization: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Plug in machine. Def ective soc k et T r y another sock et. Fuse has blo wn Replace fuse. Switch off other machines.[...]

15 9 Fur ther inf ormation 9.1 Recycling the washer Make the old cleaner un usable immediately . 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli- ances with household waste . As specifi ed in European Direc- tive 2002/96/EC on old electri- cal and electronic appliances, used electrical goods must be collected sepa[...]

16 9.3 Accessories Only use original accessor ies. Click & Clean Car nozzle Special nozzle f or enameled surf aces. Optimal distance: 30 - 50 cm. Click & Clean Undershassis nozzle 90° angled special nozzle f or undercarriage and wheel arches. Integrated guide shoes . Click & Clean Multiangle adaptor Adjusted in angles from 0° - 90° f[...]

17 EU Declaration of Conf ormity Product: High Pressure W asher T ype: Nilfi sk E 130.2, E 140.2, E 145.2 Description: 230 V 1~, 50 Hz - IP X5 The design of the unit corre sponds to the f ollowing per tinent regulations: EC Machine Directive 2006/42/EC EC Low-v oltage Directiv e 2006/95/EC EC EMV Directive 2004/108/EC Applied harmonised standards:[...]

[...]

www .nil sk.c om[...]