Nissan Juke (2015) manual

® 2015 JUK E OWN E R’S MAN UAL For y our s af ety , read car efully and keep in this v ehicle. 2015 N I SSAN J U K E F15-D F15-D Printing : September 2014 (27) Publication No.: OM15E0 0F15U0 Printed in U .S.A. T OO U M-1KA8D OM15E0 0F15U0 I n f o r m a t i o n P r o v i d e d b y :[...]

Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. Please read through this m[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

MODIFICA TION OF Y OUR VEHI- CLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems result- ing from modification may not be covered under NISSAN warranties. WHEN READING THE MANUAL This manual includes infor[...]

SIC0697 If you see the symbol above, it means “Do not do this” or “Do not let this happen” . If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to those above indicate movement or action. Arrows in an illustration that are similar t[...]

NISSAN CARES ... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and controls Pre-driving checks and adjustments Heater, air conditioner, audio and phone systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer information Index 2 3 4 5 6[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

0 Illustrated table of contents Seats, seat belts and Supplemental Restraint System (SRS) ............................................................................ 0-2 Exterior front ............................................................................... 0-3 Exterior rear ..................................................................[...]

0-2 Illustrated table of contents JVC0533X 1. Rear head restraints (Page 1-5) 2. Child restraint anchor points (for top tether strap child restraint) (P .1-30, P .1-34) 3. Front head restraints (P .1-5) — Front-seat Active Head Restraints* (P .1-9) 4. Roof-mounted curtain side-impact supplemental air bags (P .1-38) 5. Seat belts (P .1-10) 6. Fron[...]

JVC0724X 1. Hood (P .3-15) 2. Windshield wiper and washer — Switch operation (P .2-32) — Blade replacement (P .8-18) — Window washer fluid (P .8-12) 3. Parking lights, turn signal lights and front side marker lights — Switch operation (P .2-35) — Bulb replacement (P .8-29) 4. Moonroof* (P .2-48) 5. Power windows (P .2-46) 6. Outside mirro[...]

0-4 Illustrated table of contents JVC0745X 1. Lift gate (P .3-16) — Intelligent Key system (P .3-6) 2. Rear window wiper and washer — Switch operation (P .2-34) — Window washer fluid (P .8-12) 3. High-mounted stop light (P .8-26) 4. Antenna (P .4-72) — Satellite radio antenna* (P .4-32) 5. Rear window defroster (P .2-35) 6. Fuel-filler door[...]

JVC0746X For NISMO models, the vehicle parts listed below require special care or caution for cleaning. Refer to the additional information in each section. 1. Front bumper (P .3-17, P .6-14) 2. Daytime running light (P .2-38, P .3-17, P .8-26, P .8-29) 3. Side sill extensions (P .3-17) 4. Rear spoiler (P .3-17, P .7-3) Illustrated table of content[...]

0-6 Illustrated table of contents JVC0184X 1. Cargo area — Cargo cover* (P .2-45) — Cargo light (P .2-51, P .8-26) 2. Coat hook (P .2-44) 3. Sun visors (P .3-21) 4. Microphone (P .4-74, P .4-82) 5. Moonroof switch* (P .2-48) 6. Room light and map lights (P .2-50) 7. Inside rearview mirror (P .3-21) 8. Door armrest — Power window switch (P .2-[...]

JVC0725X 1. Outside mirror remote control switch (P .3-22) 2. Headlight, fog light and turn signal switch — Headlight (P .2-36) — T urn signal light (P .2-39) — Fog light* (P .2-40) 3. Paddle shifter* (P .5-16) 4. Steering wheel — Electric power steering system (P .5-34) — Horn (P .2-40) — Driver’s supplemental air bag (P .1-38) 5. Wi[...]

0-8 Illustrated table of contents JVC0607X 1. Meters and gauges (P .2-5) 2. Center ventilator (P .4-24) 3. Audio system* or Navigation system** (P .4-32) 4. Hazard warning flasher switch (P .6-2) 5. Integrated Control System* (P .2-21) — Drive mode (P .5-21) — Heater and air conditioner control (P .4-25) — Defroster switch (P .2-35) 5. Heater[...]

SIC4601 1. T achometer (P .2-8) 2. Engine coolant temperature gauge (P.2-8) 3. V ehicle information display (P .2-9) — Odometer/twin trip odometer (P .2-6) — T rip computer (P .2-10) — T orque vectoring AWD (AWD model) (P .2-11) — Outside air temperature (P .2-10) 4. Fuel gauge (P .2-9) 5. Speedometer (P .2-6) 6. Warning/indicator lights (P[...]

0-10 Illustrated table of contents JVC0747X MR16DDT ENGINE 1. Engine oil filler cap (P .8-8) 2. Radiator filler cap (P .8-8) — V ehicle overheat (P .6-10) 3. Brake and clutch* fluid reservoir (P .8-12) 4. Air cleaner (P .8-17) 5. Window washer fluid reservoir (P .8-12) 6. Engine drive belt location (P .8-15) 7. Engine oil dipstick (P .8-8) 8. Eng[...]

Warning light Name Page All-Wheel Drive (AWD) warning light (yellow) (A WD model) 2-13 Anti-lock Braking System (ABS) warning light 2-13 Brake warning light 2-13 Charge warning light 2-14 Door open warning light 2-14 Electric power steering warning light 2-14 Engine oil pressure warning light 2-14 Intelligent Key system warning light 2-14 Low fuel [...]

0-12 Illustrated table of contents MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

1 Safety — Seats, seat belts and supplemental restraint system Seats ............................................................................................ 1-2 Front seats ............................................................................ 1-3 Rear seats ............................................................................. [...]

1-2 Safety — Seats, seat belts and supplemental restraint system SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt a[...]

SSS0792 T ype A (if so equipped) JVR0342X T ype B (if so equipped) FRONT SEA TS Front manual seat adjustment Forward and backward: Pull the lever * 1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining (T ype A) (if so equipped) : T o recline the seatback, pu[...]

1-4 Safety — Seats, seat belts and supplemental restraint system The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. (See “Precautions on seat belt usage” (P .1-10) .) Also, the seatback can be reclined to allow occupants to rest when the vehicle i[...]

CAUTION When folding or returning the seatback- (s) to the upright position, to avoid injury to yourself and others: . Make sure that the seat path is clear before moving the seat. WARNING . Do not fold down the rear seats when occupants are in the rear seat area or any objects are on the rear seats. . Never allow anyone to ride in the cargo area o[...]

1-6 Safety — Seats, seat belts and supplemental restraint system JVR0051X The illustration shows the seating positions equipped with head restraint/headrest. Indicates the seating position is equipped with a head restraint. Indicates the seating position is equipped with a headrest. + indicates the seating position is not equipped with a head res[...]

JVR0203X NON-ADJUST ABLE HEAD RE- STRAINT/HEADREST COMPONENTS 1. Removable head restraint/headrest 2. Single notch 3. Lock knob 4. Stalks SSS1037 REMOVE Use the following procedure to remove the head restraint/headrest. 1. Pull the head restraint/headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint/headr[...]

1-8 Safety — Seats, seat belts and supplemental restraint system SSS0997 ADJUST For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position. JVR0259X For [...]

SSS1036 Lower T o lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position. SSS0508 FRONT -SEA T ACTIVE HEAD RE- STRAINTS (if so equipped) The Active Head Restraint moves forward utili[...]

1-10 Safety — Seats, seat belts and supplemental restraint system PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NIS[...]

SSS0016 SSS0014 WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be prop- erly restrained in the rear seat and, if appropriate, in a child restraint. . The seat belt should be properly adjusted to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

1-12 Safety — Seats, seat belts and supplemental restraint system . Once a seat belt pretensioner has activated, it cannot be reused and must be replaced together with the retractor. See a NISSAN dealer. . Removal and installation of the pretensioner system components should be done by a NISSAN dealer. . All seat belt assemblies, including retrac[...]

Fastening the seat belts 1. Adjust the seat. (See “Seats” (P .1-2) .) SSS0292 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. . The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the belt to move and allows you some [...]

1-14 Safety — Seats, seat belts and supplemental restraint system of movement in the seat. The ELR locks the seat belt when the vehicle slows down rapidly or during certain impacts. The Automatic Locking Retractor (ALR) mode (child restraint mode) locks the seat belt for child restraint installation. When ALR mode is activated the seat belt canno[...]

belt may vary depending on the model. WARNING . After adjustment, release the ad- justment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position. . The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the entire restraint[...]

1-16 Safety — Seats, seat belts and supplemental restraint system . If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth. . Periodically check to see that the seat belt and the metal components , such as buckles, tongues, retractors, flexible[...]

“Child restraints” (P .1-18) . A child restraint may be secured in the vehicle by using either the LA T CH (Lower Anchors and T ethers for CHildren) system or with the vehicle seat belt. See “Child restraints” (P .1-18) for more information. NISSAN recommends that all pre-teens and children be restrained in the rear seat. Studies show that [...]

1-18 Safety — Seats, seat belts and supplemental restraint system SSS0099 SSS0100 PRECAUTIONS ON CHILD RE- STRAINTS WARNING . Failure to follow the warnings and instructions for proper use and in- stallation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: — The child rest[...]

— Keep seatbacks as upright as possible after fitting the child restraint. — Infants and children should al- ways be placed in an appropri- ate child restraint while in the vehicle. . When the child restraint is not in use, keep it secured with the LA T CH system or a seat belt. In a sudden stop or collision, loose objects can injure occupants [...]

1-20 Safety — Seats, seat belts and supplemental restraint system SSS0801 LA T CH label location Lower Anchors and T ethers for CHildren System (LA T CH) Y our vehicle is equipped with special anchor points that are used with LA TCH (Lower Anchors and T ethers for CHildren) system compatible child restraints. This system may also be referred to a[...]

SSS0637 LA T CH lower anchor location LA T CH lower anchor location The LA T CH anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA T CH anchors. SSS0643 LA T CH webbing-mounted attachment Installing child restraint LA T CH lower anchor attachments LA T CH compatible c[...]

1-22 Safety — Seats, seat belts and supplemental restraint system may damage the top tether strap during a collision. Y our child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged. . Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure[...]

1. Position the child restraint on the seat. Always follow the child restraint manufac- turer’s instructions. SSS0648 Rear-facing web-mounted — step 2 2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is properly attached to the lower anchors. SSS0649 Rear-facing rigid-mou[...]

1-24 Safety — Seats, seat belts and supplemental restraint system SSS0639 Rear-facing — step 3 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat [...]

SSS0100 REAR-F ACING CHILD RESTRAINT IN- ST ALLA TION USING THE SEA T BEL TS WARNING The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury t[...]

1-26 Safety — Seats, seat belts and supplemental restraint system seats: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat. Position the child restraint on the seat. Always follow the restraint manufacturer’s instructions. SSS0654 Rear-facing — step 2 2. Route the seat b[...]

SSS0656 Rear-facing — step 4 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. SSS0657 Rear-facing — step 5 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up o[...]

1-28 Safety — Seats, seat belts and supplemental restraint system seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORW ARD-F ACING CHILD RE- STRAINT INST ALLA TION USING LA T CH Refer to all Warnings and Cautions in the “C[...]

SSS0647 Forward-facing — step 4 4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor a[...]

1-30 Safety — Seats, seat belts and supplemental restraint system JVR0274X Installing top tether strap WARNING Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Do[...]

SSS0640 Forward-facing (front passenger seat) — step 1 Refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint. Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg) . If the combined weight of the child and the[...]

1-32 Safety — Seats, seat belts and supplemental restraint system SSS0651 Forward-facing — step 4 4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is f[...]

SSS0641 Forward-facing — step 8 8. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restr[...]

1-34 Safety — Seats, seat belts and supplemental restraint system JVR0274X Installing top tether strap WARNING Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Do[...]

LRS0455 Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: . Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. . Check the booster seat in your vehicl[...]

1-36 Safety — Seats, seat belts and supplemental restraint system Booster seat installation CAUTION Do not use the lap/shoulder belt Auto- matic Locking Retractor (ALR) mode when using a booster seat with the seat belts. Refer to all Warnings and Cautions in the “Child safety”, “Child restraints” and “Booster seats” sections earlier i[...]

4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s instructions for adjusting the seat belt routing. 5. Pull the shoulder belt portion of the seat belt toward the retractor to take up extra slack. Be sure the shoulder belt is positioned across the top, middle portion [...]

1-38 Safety — Seats, seat belts and supplemental restraint system PRECAUTIONS ON SUPPLEMENT AL RESTRAINT SY STEM This Supplemental Restraint System (SRS) section contains important information concern- ing the following systems: . Driver and passenger supplemental front- impact air bag (NISSAN Advanced Air Bag System) . Front seat-mounted side-im[...]

SSS0131 SSS0132 WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower se- verity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. . The front passenger air bag will not inflate if the passenger air bag status [...]

1-40 Safety — Seats, seat belts and supplemental restraint system back against the seatback and as far-away as practical from the steer- ing wheel or instrument panel. Al- ways use the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System mo[...]

SSS0008 SSS0009 SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding posi- tions are shown in the illustrations. . Children may be severely injured or killed when the front air bags, side air bags or curtain [...]

1-42 Safety — Seats, seat belts and supplemental restraint system SSS0059A Do not lean against doors or windows. SSS0188A SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact sup- plemental air bags and roof-mounted curtain side-impact supplemental air bags: . The side air bags and curtain air bags ordinarily will not inflate in the eve[...]

. The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front seat or near the side roof rails. Do no[...]

1-44 Safety — Seats, seat belts and supplemental restraint system JVR0272X 1. Crash zone sensor 2. Supplemental front-impact air bag modules 3. Front seat-mounted side-impact supplemental air bag modules 4. Occupant classification sensors (weight sen- sors) 5. Occupant classification system control unit 6. Roof-mounted curtain side-impact supplem[...]

. Until you have confirmed with your dealer that your passenger seat occupant classification system is working properly, position the occu- pants in the rear seating positions. This vehicle is equipped with the NISSAN Advanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U[...]

1-46 Safety — Seats, seat belts and supplemental restraint system SSS1135 Front passenger air bag status light Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some conditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child r[...]

to be seated and wearing the seat belt properly for the most effective protection by the seat belt and supplemental air bag. NISSAN recommends that pre-teens and chil- dren be properly restrained in a rear seat. NISSAN also recommends that appropriate child restraints and booster seats be properly installed in a rear seat. If this is not possible, [...]

1-48 Safety — Seats, seat belts and supplemental restraint system . Do not place objects with sharp edges on the seat. Also, do not place heavy objects on the seat that will leave permanent impressions in the seat. Such objects can damage the seat or occupant classification sensors (weight sensors) . This can affect the operation of the air bag s[...]

*The SRS wiring harness connectors are yellow and orange for easy identification. When selling your vehicle, we request that you inform the buyer about the front air bag system and guide the buyer to the appropriate sections in this Owner’s Manual. SSS0978 FRONT SEA T -MOUNTED SIDE-IM- P ACT SUPPLEMENT AL AIR BAG AND ROOF-MOUNTED CURT AIN SIDE-IM[...]

1-50 Safety — Seats, seat belts and supplemental restraint system inflate quickly in order to help protect the occupants. Because of this, the force of the side air bags and curtain air bags inflating can increase the risk of injury if the occupant is too close to, or is against, these air bag modules during inflation. The side air bags and curta[...]

tensioner system checked and, if necessary, replaced by a NISSAN dealer. . No unauthorized changes should be made to any components or wiring of the pretensioner system. This is to prevent damage to or accidental activation of the pretensioners. T ampering with the pretensioner system may result in serious perso- nal injury. . Work around and on th[...]

1-52 Safety — Seats, seat belts and supplemental restraint system SP A1097 SUPPLEMENT AL AIR BAG W ARNING LIGHT The supplemental air bag warning light, display- ing in the instrument panel, monitors the circuits for the air bag systems, pretensioners and all related wiring. When the ignition switch is in the ON position, the supplemental air bag [...]

. The front air bag, side air bag and curtain air bag systems, and preten- sioner system should be inspected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. . If you need to dispose of a supple- mental air bag or pretensioner or scrap the vehicle, contact a NISSAN dealer. Correct supplemental air bag and p[...]

1-54 Safety — Seats, seat belts and supplemental restraint system MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

2 Instruments and controls Cockpit ........................................................................................ 2-3 Instrument panel ........................................................................ 2-4 Meters and gauges ................................................................... 2-5 Speedometer and odometer .............[...]

Windows .................................................................................. 2-46 Power windows ................................................................ 2-46 Moonroof (if so equipped) ................................................... 2-48 Power moonroof ............................................................... 2-48 Int[...]

JVC0725X 1. Outside mirror remote control switch 2. Headlight, fog light and turn signal switch — Headlight — T urn signal light — Fog light* 3. Paddle shifter* 4. Steering wheel — Electric power steering system — Horn — Driver’s supplemental air bag 5. Wiper and washer switch 6. Shift lever — Continuously Variable T ransmission (CV[...]

2-4 Instruments and controls JVC0607X 1. Meters and gauges 2. Center ventilator 3. Audio system* or Navigation system** 4. Hazard warning flasher switch 5. Integrated Control System* — Drive mode — Heater and air conditioner control — Defroster switch 5. Heater and air conditioner control (models without Integrated Control System) — Defrost[...]

SIC4601 1. T achometer 2. Engine coolant temperature gauge 3. V ehicle information display — Odometer/twin trip odometer — T rip computer — T orque vectoring AWD (AWD model) — Outside air temperature 4. Fuel gauge 5. Speedometer 6. Warning/indicator lights 7. Instrument brightness control knob 8. Continuously V ariable T ransmission (CVT) p[...]

2-6 Instruments and controls SIC4504 Speedometer SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h) . SIC4571 Odometer/twin trip odometer Odometer/twin trip odometer The odometer * 1 /twin trip odometer * 2 are displayed when the ignition switch is in the ON position. [...]

SP A2809 Loose fuel cap warning message Push the reset switch * A for more than 1 second to reset the L OOSE FUEL CAP warning message after the fuel cap has been tightened. For additional information see “Fuel-filler cap” (P .3-18) of this manual. JVI1178X Check tire pressure warning message The CHECK TIRE PRES (pressure) warning message is dis[...]

2-8 Instruments and controls SIC4506 T ACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM) . Do not rev the engine into the red zone * 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed. Operating the engine in the red zone may cause serious engine damage. SIC4123 ENGINE [...]

SIC4124 FUEL GAUGE The gauge * 1 indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. Refill the fuel tank before the gauge registers 0 (empty) . The low fuel warning light illuminates when the amount of fuel in the tank is getting low . Refuel as soon as it [...]

2-10 Instruments and controls OUTSIDE AIR TEMPERA TURE The outside air temperature is displayed in 8 Fo r 8 C. When the outside air temperature becomes 37 8 F( 3 8 C) or lower, the outside air temperature display blinks to give a warning. The display will stop blinking after 1 minute or when the outside air temperature becomes 39 8 F( 4 8 C) or abo[...]

Average fuel consumption (mpg or l (liter)/100 km) The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pushing the trip computer mode switch * A for approximately 1 second. The display is updated every 30 seconds. At about the first 1/3 mile (500 m) after a reset, the display shows “---?[...]

2-12 Instruments and controls All-Wheel Drive (A WD) warning light (AWD model) (if so equipped) Low fuel warning light Cruise indicator light Anti-lock Braking System (ABS) warning light Low tire pressure warning light Engine start operation indicator light Low washer fluid warning light (if so equipped) Exterior light indicator Brake warning light[...]

CHECKING BULBS With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on (if so equipped): , or , , , , , The following lights come on briefly and then go off (if so equipped): , or , , , , , , , If any light does not come on, it may indicate a burn[...]

2-14 Instruments and controls vehicle towed because driving it could be dangerous. . Pressing the brake pedal with the engine stopped and/or low brake fluid level may increase your stop- ping distance and braking will re- quire greater pedal effort as well as pedal travel. . If the brake fluid level is below the minimum or MIN mark on the brake flu[...]

. The light blinks in yellow when the door is closed with the Intelligent Key left outside the vehicle and the ignition switch in the ACC or ON position. Make sure that the Intelligent Key is inside the vehicle. . The light blinks in green when the Intelligent Key battery is running out of power. Replace the battery with a new one. (See “Intellig[...]

2-16 Instruments and controls WARNING . If the light does not illuminate with the ignition switch placed in the ON position, have the vehicle checked by a NISSAN dealer as soon as possible. . If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop[...]

fastened when the front passenger’s seat is occupied. For about 5 seconds after the ignition switch is in the ON position, the system does not activate the warning light for the front passenger. See “Seat belts” (P .1-10) for precautions on seat belt usage. Supplemental air bag warning light After placing the ignition switch in the ON positio[...]

2-18 Instruments and controls Continuously Variable T ransmis- sion (CVT) indicator light (if so equipped) When the ignition switch is in the “ON” position, the Continuously V ariable T ransmission (CVT) indicator light illuminates and then turns off. Cruise indicator light Cruise main switch indicator: This light illuminates when the cruise co[...]

Operation: The malfunction indicator light will come on in one of two ways: . Malfunction indicator light illuminated steady — An emission control system and/or CVT malfunction has been detected. Check the fuel-filler cap if the L OOSE FUEL CAP warning message is displayed on the twin trip odometer. If the fuel-filler cap is loose or missing, tig[...]

2-20 Instruments and controls Light reminder chime The light reminder chime will sound when the driver side door is opened with the headlight switch in the or position, and the ignition switch is in the ACC, OFF or L OCK position. T urn the light switch off when you leave the vehicle. Brake pad wear warning The disc brake pads have audible wear war[...]

The Integrated Control System is located below the audio system or navigation system (if so equipped) . T wo Integrated Control System modes can be selected: Drive mode and Climate Control mode. Depending on which Integrated Control System mode is selected (Drive mode or Climate Control mode) , the screen display and some button functions will chan[...]

2-22 Instruments and controls SETUP FUNCTION While in the Drive mode, the following items can be set up by pressing the SETUP button. . Display Brightness . Button Brightness . Clock Time Setting . Select Language . Select Units . Auto Interior Illumination . Selective Door unlock . Auto Headlight Sensitivity (if so equipped) . CLIMA TE ECO NOTE: .[...]

Clock Time Setting NOTE: Clock Time Setting is used for displaying the ECO information. See “Eco informa- tion” (P .2-27) . SIC4558 1. Press the Drive Mode Select button. 2. Press the SETUP button. 3. T urn the Selection dial to “Clock Time Setting”, then press the ENTER button. SIC4559 4. T urn the Selection dial to select the day of the w[...]

2-24 Instruments and controls SIC4560 Select Language 1. Press the Drive Mode Select button. 2. Press the SETUP button. 3. T urn the Selection dial to “Select Lan- guage”, then press the ENTER button. SIC4561 4. T urn the Selection dial to select the pre- ferred language, then press the ENTER button to apply the selection. SIC4580 Select Units [...]

SIC4581 4. T urn the Selection dial to select “US” or “METRIC”, then press the ENTER button to apply the selection. SIC4605 Auto Interior Illumination Select to turn the illumination of the interior lights on or off when any door is unlocked. 1. Press the Drive Mode Select button. 2. Press the SETUP button. 3. T urn the Selection dial to ?[...]

2-26 Instruments and controls 4. T urn the Selection dial to select “ON” or “OFF”, then press the ENTER button to apply the selection. The indicator will turn red when selective door unlock is on. SIC4607 Auto Headlight Sensitivity (if so equipped) Select to adjust the sensitivity of the automatic headlight. 1. Press the Drive Mode Select b[...]

JVI0324X DRIVE INFORMA TION While in the Drive mode, push the Drive information button to display elapsed time, average speed and trip distance. Pressing the Drive information button a second time will display the G (gravity) -Force screen. Elapsed time The elapsed time shows the time since the last reset. Average speed (km/h or MPH) The average sp[...]

2-28 Instruments and controls The following ECO INFO mode will appear on the display by pushing the ECO information button, then turning the selection dial to scroll through the different screens. While driving, only one ECO information screen is displayed. The vehicle must be stopped to scroll through the different screens. JVI1165X Daily Reset Re[...]

NOTE: When the clock is not set, the ECO information (daily and weekly) cannot be used. Reset at Start Records of up to the past 4 times of each time of ignition switch ON fuel consumption can be shown on the display. Manual Reset Records of up to the past 4 times of resetting fuel consumption can be shown on the display. The displayed ECO INFO can[...]

2-30 Instruments and controls SIC2045 How to arm the vehicle security system 1. Close all windows. The system can be armed even if the windows are open. 2. Place the ignition switch in the OFF position and remove the Intelligent Key from the vehicle. 3. Close all doors. Lock all doors. The doors can be locked with: . the L OCK button on the Intelli[...]

1. Leave the ignition switch in the ON position for approximately 5 seconds. 2. Place the ignition switch in the OFF or L OCK position and wait approximately 10 seconds. 3. Repeat step 1 and 2 again. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key. If this procedure allows the[...]

2-32 Instruments and controls service as soon as possible. Please bring all registered keys that you have when visiting a NISSAN dealer for service. WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm windshield with the defroster before you wash the windshiel[...]

SIC3664 T ype A (if so equipped) JVI1010X T ype B (if so equipped) The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed: * 1 Intermittent — intermittent operation can be adjusted by turning the knob toward * A (Slower) or * B (Faster) . * 2 Low —[...]

2-34 Instruments and controls WARNING In freezing temperatures the washer solution may freeze on the rear window glass and obscure your vision. Warm the rear window with the defroster before you wash the rear window. CAUTION . Do not operate the washer continu- ously for more than 30 seconds. . Do not operate the washer if the reservoir tank is emp[...]

SIC4520 T ype A (if so equipped) SIC4519 T ype B (if so equipped) T o defog/defrost the rear window glass and outside mirrors (if so equipped) , start the engine and push the switch * 1 on. The indicator light * 2 will illuminate. Push the switch again to turn the defroster off. It will automatically turn off in approximately 15 minutes. CAUTION Wh[...]

2-36 Instruments and controls tion. It is generally desirable not to turn off the headlights for short intervals (for example, when the vehicle stops at a traffic signal) . . If the xenon headlight bulb is close to burning out, the brightness will drasti- cally decrease, the light will start blinking, or the color of the light will become reddish. [...]

headlights when it is light. For US models (if so equipped): The headlights will also be turned on automatically at twilight or in rainy weather (when the windshield wiper is operated continuously) . If the ignition switch is placed in the OFF position and one of the doors is opened and this condition is continued, the headlights remain on for 5 mi[...]

2-38 Instruments and controls Battery saver system . When the headlight switch is in the or position while the ignition switch is in the ON position, the lights will automatically turn off within a period of time after the ignition switch has been placed in the OFF position. . When the headlight switch remains in the or position after the lights au[...]

Instrument brightness control The instrument brightness control operates when the ignition switch is in the ON position. Push the control knob * A to adjust the bright- ness of the instrument panel lights. The bright- ness indicator * B will be shown briefly in the vehicle information display when the control is turned. When the brightness level re[...]

2-40 Instruments and controls SIC3672 FOG LIGHT SWITCH (if so equipped) T o turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. T o turn them off, turn the switch to the OFF position. The headlights must be on for the fog lights to operate. SIC4521 T o sound the horn, push the center pad area of [...]

WARNING Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat tempera- tures or have an inability to feel pain in body parts that contact the seat. Use of the seat heater by such people could result in serious injury. CAUTION . The battery could run down if the seat heater is operated while the en[...]

2-42 Instruments and controls The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. When the vehicle’s interior is warmed, or before you leave the vehicle, be sure to turn off the switch. SIC4525 The power outlet is located in the instrument panel. CA[...]

CUP HOLDERS CAUTION . Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. . Use only soft cups in the cup holder. Hard objects can injure you in an accident. SIC4527 Center console SIC4528 Door (front and rear) Soft bottle holders CAUTION . Do n[...]

2-44 Instruments and controls SIC4529 CARGO FLOOR BO X 1. T o open the cargo floor box, pull the board * A . SIC4526 GL OVE BO X WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. T o open the glove box, pull the handle. T o close, push the lid in until the lock latches. The glove box light illum[...]

CARGO COVER (if so equipped) WARNING . Never put anything on the cargo cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop. . Do not leave the cargo cover in the vehicle with it disengaged from the holder. . The child restraint top tether strap may be damaged by contact with the cargo cover or items in t[...]

2-46 Instruments and controls POWER WINDOWS WARNING . Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the win- dow lock switch to prevent unex - pected use of the power windows. . Do not leave children unattended inside the vehicle. They could un- knowingly activate [...]

SIC4523 Passenger side power window switch The passenger side switch will open or close only the corresponding window. T o open or close the window, push down or pull up the switch and hold it. SIC4524 Automatic operation The automatic operation is available for the switch that has an mark on its surface. T o fully open or close the window, complet[...]

2-48 Instruments and controls If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Place the ignition switch in the ON position. 2. Close the door. 3. Open the window completely by operating the power windo[...]

SIC4624 Sliding the moonroof T o fully open or close the moonroof, push the switch toward * 1 or * 2 and release it; it need not be held. The roof will automatically open or close all the way. T o stop the roof, push the switch in any direction while it is opening or closing. Tilting the moonroof T o tilt up, first close the moonroof by pushing the[...]

2-50 Instruments and controls CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. SIC4572 MAP LIGHTS (if so equipped) Operate the map light switch to turn the map light on or off. * 1 : ON position * 2 : OFF position SIC4573 MAP LIGHT CONTROL SWIT CH (if so equipped) The map lights con[...]

Center position When the switch is in the center position, the map lights will illuminate under the following conditions: . ignition switch is placed in the OFF position — remain on for about 15 seconds. . doors are unlocked by pushing the UN- L OCK button (on the Intelligent Key) or the request switch with the ignition switch in the L OCK positi[...]

2-52 Instruments and controls MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

3 Pre-driving checks and adjustments Keys .............................................................................................. 3-2 Intelligent Keys ..................................................................... 3-2 Doors ............................................................................................ 3-4 Locking with ke[...]

3-2 Pre-driving checks and adjustments A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record any key numbers so it is very important to keep track of your ke[...]

— Do not change or modify the Intelligent Key. — Do not use a magnet key holder. — Do not place the Intelligent Key near an electric appliance such as a television set, personal computer or cellular phone. — Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could af[...]

3-4 Pre-driving checks and adjustments WARNING . Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep [...]

SP A2803 Driver’s armrest L OCKING WITH POWER DOOR L OCK SWIT CH Operating the power door lock switch will lock or unlock all the doors. The switch is located on the driver’s door armrest. T o lock the doors, push the power door lock switch to the lock position * 1 with the driver’s door open, then close the door. When locking the door this w[...]

3-6 Pre-driving checks and adjustments SP A2801 CHILD SAFETY REAR DOOR L OCK Child safety rear door locks help prevent the rear doors from being opened accidentally, espe- cially when small children are in the vehicle. When the levers are in the lock position * 1 , the rear doors can be opened only from the outside. T o disengage, move the levers t[...]

computer. . When the vehicle is parked near a parking meter. In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key. Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years. If the battery is dis- charged, replace it wit[...]

3-8 Pre-driving checks and adjustments SP A2074 INTELLIGENT KEY OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent K ey is within the specified operating range from the request switch * 1 . When the Intelligent Key battery is discharged or strong radio waves are present near the operat- ing location, the Intelligen[...]

. Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. SP A2408 SP A2710 SP A2545 INTELLIGENT KEY OPERA TION Y ou can lock or unlock the doors without taking the key out from your pocket or bag. When you carry the Inte[...]

3-10 Pre-driving checks and adjustments Locking doors 1. Place the ignition switch in the OFF position and carry the Intelligent Key with you.*1 2. Close all the doors.*2 3. Push the door handle request switch (dri- ver’s or front passenger’s) * A or the lift gate request switch * B while carrying the Intelligent Key with you.*3 4. All the door[...]

TROUBLESHOO TING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The P position selecting warning light in the meter illuminates and the inside warning chime sounds continuously (Continuously Variable T ransmission models) . The shift lever is not in the P (Park) position. Shift the shift lever to the[...]

3-12 Pre-driving checks and adjustments HOW T O USE REMO TE KEYLESS ENTR Y FUNCTION WARNING . Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use. . The Intelligent Key transmits radio waves when the buttons are[...]

SP A2252 * 1 L OCK button * 2 UNL OCK button * 3 P ANIC button When you lock or unlock the doors, the hazard indicator will flash and the horn will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” (P .3-13) . Locking doors 1. Place the ignition switch in the OFF position and carry the Intelligent Key with you.*[...]

3-14 Pre-driving checks and adjustments horn operates. Hazard indicator and horn mode: Operation DOOR LOCK DOOR UNLOCK Pushing door handle request switch or lift gate request switch HAZARD - twice OUTSIDE CHIME - twice HAZARD - once OUTSIDE CHIME - once Pushing or button HAZARD - twice HORN - once HAZARD - once HORN - none Hazard indicator mode: Op[...]

Switching procedure: T o switch the hazard indicator and horn (chime) operation, push the L OCK * 1 and UN- L OCK * 2 buttons on the Intelligent Key simultaneously for more than 2 seconds. . When the hazard indicator mode is set, the hazard indicator flashes 3 times. . When the hazard indicator and horn mode is set, the hazard indicator flashes onc[...]

3-16 Pre-driving checks and adjustments JVP0338X When opening the hood: 1. Pull the hood release handle * 1 located below the instrument panel; the hood will then spring up slightly. 2. Locate the lever * 2 in between the hood and grille, and pull the lever up with your fingertips. 3. Raise the hood * 3 . 4. Remove the support rod * 4 and insert it[...]

JVP0339X T o open the lift gate, unlock it and push the lift gate opener switch * A . Pull up the lift gate to open. The lift gate can be unlocked by: . pushing the UNLOCK button on the Intelligent Key twice. . pushing the lift gate request switch with the Intelligent Key carried with you. . pushing the power door lock switch to the unlock position[...]

3-18 Pre-driving checks and adjustments SP A2336 OPENING THE FUEL -FILLER DOOR T o open the fuel-filler door, pull the release handle located below the instrument panel. T o lock, close the fuel-filler door securely. SP A2800 FUEL -FILLER CAP T o remove the fuel-filler cap: 1. T urn the fuel-filler cap counterclockwise * 1 to remove. 2. Put the fue[...]

. Do not fill a portable fuel container in the vehicle or trailer. Static elec- tricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. T o reduce the risk of serious injury or death when filling portable fuel containers: — Always place the container on the ground when filling. — Do not use electronic devices[...]

3-20 Pre-driving checks and adjustments fuel cap. WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. SP A2808 TIL T OPERA TION Push the lock lever down * 1 and adjust the steering wheel up or down * 2 to the desired position. Pull the lock lever up * 3 securely to lock the steering[...]

SIC3451 CAUTION . Do not store the main sun visor before storing the extension sun visor. . Do not pull the extension sun visor forcedly downward. 1. T o block out glare from the front, swing down the main sun visor * 1 . 2. T o block glare from the side, remove the main sun visor from the center mount and swing it to the side * 2 . 3. Draw out the[...]

3-22 Pre-driving checks and adjustments SP A2143 The night position * 1 will reduce glare from the headlights of vehicles behind you at night. Use the day position * 2 when driving in daylight hours. WARNING Use the night position only when ne- cessary, because it reduces rear view clarity. OUTSIDE MIRRORS WARNING Objects viewed in the outside mirr[...]

Defrosting outside mirrors (if so equipped) The outside mirrors will be heated when the rear window defroster switch is operated. (See “Rear window and outside mirror defroster switch” (P .2-35) .) SP A1829 Foldable outside mirrors Fold the outside mirror by pushing it toward the rear of the vehicle. SIC3869 V ANITY MIRROR T o use the front van[...]

3-24 Pre-driving checks and adjustments MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

4 Heater, air conditioner, audio and phone sys- tems Safety note .................................................................................. 4-3 Control buttons and functions (models with navigation system) .................................................................... 4-3 How to use touch screen .......................................[...]

Car phone or CB radio ........................................................ 4-73 Bluetooth  Hands-Free Phone System (models without navigation system) ................................................................. 4-74 Regulatory information .................................................... 4-75 Using the system ........................[...]

WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. . In case you notice any foreign object in the system hardwa[...]

4-4 Heater, air conditioner, audio and phone systems When you use this system, make sure the engine is running. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will discharge the battery, and the engine will not start. Reference symbols: “Example” — Words marked in quotes refer to a key shown only on[...]

. 123/ABC: Changes the keyboard between numbers and alphabets. . Space: Inserts a space. . Delete: Deletes the last inputted character with one touch. T ouch and hold the “Delete” key to delete all of the characters. . OK: Completes the character input. T ouch screen maintenance If you clean the display screen, use a dry, soft cloth. If additio[...]

4-6 Heater, air conditioner, audio and phone systems Menu Item Result Audio For more details, see “FM-AM-SAT radio with Compact Disc (CD) player (T ype B)” (P .4-59) . Navigation See the separate Navigation System Owner’s Manual for more information. Phone & Bluetooth For more details, see “Bluetooth  Hands-Free Phone System (models [...]

Color Adjust touch-screen color. T emperature Unit T ouch this key to change the temperature unit being displayed (Fahrenheit or Celsius). T ouchscreen click T oggles the touch-screen click feature on or off. When activated a click sound will be heard every time a key on the screen is touched. System Beeps T oggle the system beep tones feature on o[...]

4-8 Heater, air conditioner, audio and phone systems HOW T O USE BRIGHTNESS CON- TROL BUTT ON T o change the display brightness, push the button. Pushing the button again will change the display to the day or the night display. If no operation is performed within 5 seconds, the display will return to the previous display. Push and hold the button f[...]

the lens, a malfunction, fire or an electric shock. . Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. CAUTION Do not scratch the camera lens when cleaning dirt or snow from the lens. SAA2776 HOW T O READ THE DISPLA YED LINES Guiding lines which indicate [...]

4-10 Heater, air conditioner, audio and phone systems DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DIST ANCES Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actua[...]

SAA3440 Backing up near a projecting object The vehicle may seem to nearly clear the object in the display . However, the vehicle may hit the object if it projects over the actual backing up course. SAA3475 Backing up behind a projecting object The position * C is shown further than the position * B in the display. However, the position * C is actu[...]

4-12 Heater, air conditioner, audio and phone systems . When the temperature is extremely high or low, the screen may not clearly display objects. This is not a malfunction. . When strong light is directly coming on the camera, objects may not be displayed clearly. This is not a malfunction. . V ertical lines may be seen in objects on the screen. T[...]

JVH1036X There are some areas where the system will not show objects and the system does not warn of moving objects. When in the Front or the Rear View display, an object below the bumper or on the ground may not be viewed * 1 . When in the Bird’s-Eye View, a tall object near the seam * 3 of the camera viewing areas will not appear in the monitor[...]

4-14 Heater, air conditioner, audio and phone systems A V AILABLE VIEWS WARNING . The distance guide lines and the vehicle width lines should be used as a reference only when the vehicle is on a paved, level surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displa[...]

Front and Rear View Guiding lines, which indicate the vehicle width and distances to objects with reference to the vehicle body line * A , are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body. . Red line * 1 : approx. 1.5 ft (0.5 m) . Y ellow line * 2 : approx. 3 ft (1 m) . Green line * 3 : approx. 7 ft (2 m)[...]

4-16 Heater, air conditioner, audio and phone systems JVH1037X Bird’s-Eye View The Bird’s-Eye View shows the overhead view of the vehicle which helps confirm the vehicle position and the predicted course to a parking space. The vehicle icon * 1 shows the position of the vehicle. Note that the distance between objects viewed in the Bird’s-Eye [...]

SAA3571 Front-Side View Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor. The front-of-vehicle line * 1 shows the front part of the vehicle. The side-of-vehicle line * 2 shows the vehicle width including the outside mirrors. The extensions * 3 of both the front * 1 and side * 2 lines[...]

4-18 Heater, air conditioner, audio and phone systems DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DIST ANCES Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actua[...]

SAA1923 Backing up near a projecting object The predictive course lines * A do not touch the object in the display . However, the vehicle may hit the object if it projects over the actual backing up course. SAA1980 Backing up behind a projecting object The position * C is shown further than the position * B in the display. However, the position * C[...]

4-20 Heater, air conditioner, audio and phone systems . the shift lever is in the D (Drive) position (CVT model) or the shift lever is out of the R (Reverse) position (MT model) and the vehicle speed increases above approxi- mately 6 MPH (10 km/h) . . a different screen is selected. HOW T O ADJUST THE SCREEN For the display adjustment, see “How t[...]

JVH0872X In the Bird’s-Eye View , the yellow frame * 1 is displayed on each camera image (front, rear, right, left) depending on where moving objects are detected. If the MOD system is turned off, the MOD icon * 3 is not displayed. JVH0873X The yellow frame * 2 is displayed on each view in the Front View and Rear View modes. When the MOD system d[...]

4-22 Heater, air conditioner, audio and phone systems — When there is dirt, water drops or snow on the camera lens. — When the position of the moving objects in the display is not changed. . The MOD system might detect flow- ing water droplets on the camera lens, white smoke from the muffler, moving shadows, etc . . The MOD system may not funct[...]

JVH1054X When the “ ” icon is displayed on the screen, the camera image may be receiving temporary electronic disturbances from sur- rounding devices. This will not hinder normal driving operation but the system should be inspected by a NISSAN dealer if it occurs frequently. OPERA TING TIPS CAUTION . Do not use alcohol, benzine or thinner to cl[...]

4-24 Heater, air conditioner, audio and phone systems SAA3338 CENTER VENTILA TORS Adjust the air flow direction of ventilators as illustrated. Adjust the air flow direction of the ventilators by moving the center knob (up/down and left/right) until the preferred position is achieved. SAA2381 SIDE VENTILA T ORS Open or close the vents, and adjust th[...]

WARNING . The air conditioner cooling function operates only when the engine is running. . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fat[...]

4-26 Heater, air conditioner, audio and phone systems SAA3447 1. Air intake lever (Outside air circulation /Air recirculation ) 2. Air flow control dial 3. Fan speed control dial 4. A/C (Air Conditioner) button 5. T emperature control dial 6. Rear window defroster button (See “Rear window and outside mirror defroster switch” (P .2-35) .) MANUAL[...]

Fan speed control: T urn the fan speed control dial clockwise to increase the fan speed. T urn the fan speed control dial counter- clockwise to decrease the fan speed. A/C (Air Conditioner) operation: Push the A/C button to turn on or off the air conditioner. When the air conditioner is on, the A/C indicator light on the button illuminates. T emper[...]

4-28 Heater, air conditioner, audio and phone systems 4. T urn the temperature control dial to the desired position. When the position is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. Air conditioner operation The air conditioner system should be operated for approximately 10 m[...]

SAA3443 1. AUT O button/T emperature control dial 2. OFF button 3. A/C button 4. CLIMA TE button 5. Display screen* 6. Air flow control buttons 7. Fan speed control dial 8. Front defroster button 9. Air intake button (Outside air circulation /Air recirculation ) 10. Rear window defroster button (See “Rear window and outside mirror defroster switc[...]

4-30 Heater, air conditioner, audio and phone systems . T o remove moisture or fog on the front window quickly , set the temperature to the high temperature and the fan speed to their maximum level. . After the windshield is cleared, push the front defroster button again. (The indicator light will turn off.) . When the front defroster button is pus[...]

SAA3378 Air conditioner mode screen SAA3379 Drive mode screen Displaying Climate control When in “Climate Control Mode”, the selected temperature and airflow , and automatic mode or manual mode are indicated on the display. When in “Drive Mode”, the same items as above are indicated, but on the bottom of the display. T o switch to “Climat[...]

4-32 Heater, air conditioner, audio and phone systems OPERA TING TIPS (for automatic air conditioner) . When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate. This is not a malfunction. After the coolant tem- perature warms up, air will flow normally from the foot outlets. . The [...]

function in your NISSAN radio system. Reception conditions will constantly change because of vehicle movement. Buildings, terrain, signal distance and interference from other vehicles can work against ideal reception. Described below are some of the factors that can affect your radio reception. Some cellular phones or other devices may cause interf[...]

4-34 Heater, air conditioner, audio and phone systems Satellite radio reception (if so equipped) : When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly. This is not a malfunction. Wait more than 10 minutes with the satellite radio ON and the vehicle away from any metal or la[...]

— CDs that are not round — CDs with a paper label — CDs that are warped, scratched, or have abnormal edges . This audio system can only play pre- recorded CDs. It has no capabilities to record or burn CDs. . If the CD cannot be played, error messages as the following examples will be displayed. Check Disc: — Confirm that the CD is inserted [...]

4-36 Heater, air conditioner, audio and phone systems Notes for iPod  use: iPod  is a trademark of Apple Inc., registered in the U.S. and other countries. . Improperly plugging in the iP od  may cause a checkmark to be displayed on and off (flickering) . Always make sure that the iPod  is connected properly. . An iPod nano  (1st Gene[...]

SAA1025 Playback order chart Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. . The names of folders not containing MP3 or WMA files are not shown in the display . . If there is a file in the top level of the disc, “Root Folder” is displayed. . The playback order is the order in which the files were written [...]

4-38 Heater, air conditioner, audio and phone systems Specification chart (for models without navigation system) : Supported media CD, CD-R, CD-RW , USB2.0 Supported file systems CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on [...]

Specification chart (for models with navigation system) : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. Supported versions*1 MP3 V ersion MPEG1, MPEG2, MPEG2.5 Sampling frequency 8 kHz - 48 kHz Bit rate 8 kbps - 320 kbps, VBR WMA*2[...]

4-40 Heater, air conditioner, audio and phone systems T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the[...]

Bluetooth  Audio player Bluetooth  is a trademark owned by Bluetooth SIG, Inc. and li- censed to Bosch and Visteon Corporation. . Some Bluetooth  audio devices may not be recognized by the in-vehicle audio system. . It is necessary to set up the wireless connection between a compatible Blue- tooth  audio device and the in-vehicle Blueto[...]

4-42 Heater, air conditioner, audio and phone systems JVH0866X 1. DISP (display) button 2. MEDIA button 3. CD eject button 4. FM·AM button 5. CD button 6. Color display 7. Apps button 8. SEEK TRACK (rewind) button 9. Radio SCAN tuning button 10. SEEK TRACK (forward) button 11. BACK button 12. Power button/VOL (volume) control knob 13. RPT (repeat)[...]

. Bass, T reble, Balance and Fade Controls the sound of the audio system. Balance adjusts the sound between the left and right speakers. Fade adjusts the sound between the front and rear speakers. Select the “Bass”, “T reble”, “Balance” or “Fade” using the TUNE·FOLDER knob, and then push the ENTER/SETTING button. T urn the TUNE·FO[...]

4-44 Heater, air conditioner, audio and phone systems FM-AM Radio operation radio (FM·AM) band select : Push the button to change the band as follows: AM ? FM1 ? FM2 ? AM TUNE (T uning) : T urn the TUNE·FOLDER knob for manual tuning. SEEK tuning: Push the or button to tune from low to high or high to low frequencies and to stop at the next broadc[...]

being played, the play pattern can be changed as follows: (CD) (Normal) ⇔ 1 Disc Random (CD with compressed audio files) (Normal) ? 1 Disc Random ? 1 Folder Random ? (Normal) CD eject: When the CD eject button is pushed with the CD loaded, the CD will be ejected. When this button is pushed while the CD is being played, the CD will be ejected. If [...]

4-46 Heater, air conditioner, audio and phone systems Next/Previous File and Fast Forward/Rewind: When the or button is pushed and hold while a USB memory is being played, the USB memory will play while forwarding or rewinding. When the button is released, the USB memory will return to normal play speed. When the or button is pushed while the USB m[...]

Inc., registered in the U.S. and other countries. Compatibility: The following models are compatible: . iPod nano  1G (Firmware version 1.3.1 -) . iPod nano  2G (Firmware version 1.1.3 -) . iPod nano  3G (Firmware version 1.0.0 -) . iPod nano  4G (Firmware version 1.0.2 -) . iPod nano  5G (Firmware version 1.0.1 -) . iPod nano  6G[...]

4-48 Heater, air conditioner, audio and phone systems (Shuffle Off) ? T rack Shuffle ? (Shuffle Off) BACK button: The display will return to the previous screen. Bluetooth  audio player operation If you have a compatible Bluetooth  audio device that is capable of playing audio files, the device can be connected to the vehicle’s audio system[...]

JVH0370X AUX (Auxiliary) input jack The AUX input jack is located on the lower part of the instrument panel. The AUX input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computer. Push the button repeatedly to play a compatible device when it is plugged into the AUX input jack. NIS[...]

4-50 Heater, air conditioner, audio and phone systems JVH1055X 1. XM band select button 2. CD eject button 3. FM·AM button 4. MEDIA button 5. Color display 6. Apps button 7. Radio CA T (category)/REW (rewind) button for SEEK/TRACK 8. Radio SCAN tuning button 9. Radio CA T (category)/FF (fast forward) button for SEEK/TRACK 10. BACK button 11. DISP [...]

Audio main operation The audio system operates when the ignition switch is placed in the ON or ACC position. Head unit : The auto loudness circuit enhances the low and high frequency ranges automatically. Power button / VOL (volume) control knob: Push the Power button/VOL (volume) control knob to turn on and off the audio system. T urn the Power bu[...]

4-52 Heater, air conditioner, audio and phone systems NE·SCROLL control knob and then push the ENTER/SETTING button. Use the TU- NE·SCROLL control knob to select the preferred language. DISP button: Display of the screen can be canceled by pushing the button. Y ou can still listen to music that is being played back even while the screen display i[...]

station. to Station memory operations: 12 stations can be set for the FM band (6 each for FM1 and FM2) and 6 stations can be set for the AM band. 1. Choose the radio band using the button. 2. T une to the desired station. 3. Push and hold the desired station preset button to untill beep sounds. 4. The station indicator will then come on. Memorizing[...]

4-54 Heater, air conditioner, audio and phone systems being played, the CD will be ejected. If the CD comes out and is not removed, it will be pulled back into the slot to protect it. USB (Universal Serial Bus) connection port WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted yo[...]

Next/Previous File and Fast Forward/Rewind: When the or button is pushed and hold while a USB memory is being played, the USB memory will play while forwarding or rewinding. When the button is released, the USB memory will return to normal play speed. When the or button is pushed while the USB memory is being played, the next track or the beginning[...]

4-56 Heater, air conditioner, audio and phone systems Inc., registered in the U.S. and other countries. Compatibility: The following models are compatible: . iPod nano  1G (Firmware version 1.3.1 -) . iPod nano  2G (Firmware version 1.1.3 -) . iPod nano  3G (Firmware version 1.0.0 -) . iPod nano  4G (Firmware version 1.0.2 -) . iPod nan[...]

BACK button: The display will return to the previous screen. Bluetooth  audio player operation If you have a compatible Bluetooth  audio device that is capable of playing audio files, the device can be connected to the vehicle’s audio system so that the audio files on the device play through the vehicle’s speakers. Regulatory information:[...]

4-58 Heater, air conditioner, audio and phone systems JVH0370X AUX (Auxiliary) input jack The AUX input jack is located on the lower part of the instrument panel. The AUX input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computer. Push the button repeatedly to play a compatible [...]

JVH0738X 1. CD eject button 2. FM·AM button 3. AUX button 4. CD insert slot 5. button 6. Backward seek button and Forward seek button 7. BACK button 8. TUNE knob / AUDIO button 9. Display screen 10. ON·OFF button / VOL (volume) control knob 11. CD button 12. SXM button* FM-AM-SA T RADIO WITH COMP ACT DISC (CD) PLA YER (T ype B) (if so equipped) *[...]

4-60 Heater, air conditioner, audio and phone systems Audio settings: 1. push the button. 2. T ouch the “Settings” key . 3. T ouch the “ Audio” key. Use the touch-screen to adjust the following items to the desired setting: . Bass: Adjusts the bass to the desired level. . T reble: Adjusts the treble to the desired level. . Balance: Adjusts [...]

SiriusXM Satellite Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. If a compact disc is playing when the SXM button is pushed, the compact disc will auto- matically be turned off and the last radio station played will come on. While the radio is in SXM mode, the operation can be controlled through [...]

4-62 Heater, air conditioner, audio and phone systems 3. The channel indicator will then come on and the sound will resume. Programming is now complete. 4. Other keys can be set in the same manner. If the battery cable is disconnected or if the fuse opens, the radio memory will be erased. In that case, reset the desired stations. Presets can also b[...]

SEEK (Fast Forward/Rewind) buttons: Push and hold the seek buttons or for 1.5 seconds while the compact disc is playing to reverse or fast forward the track being played. The compact disc plays at an increased speed while reversing or fast forwarding. When the button is released, the compact disc returns to normal play speed. SEEK (Previous/Next T [...]

4-64 Heater, air conditioner, audio and phone systems JVH0742X USB (Universal Serial Bus) connection port Connecting a device to the USB port: WARNING Do not connect, disconnect, or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. CAUTI[...]

JVH0743X Play information: Information about the audio files being played is shown on the display screen of the vehicle’s audio system. T ouch “Browse” to display the list of categories that can be used to narrow the search. T ouch the name of a song on the screen to begin playing that song. Seek button: Push the button while an audio file on[...]

4-66 Heater, air conditioner, audio and phone systems CAUTION . Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. . Do not grab the USB port cover (if so equipped) when pulling the USB device out of[...]

JVH0746X Audio main operation: Place the ignition switch in the ACC or ON position. Push the AUX button repeatedly to switch to the iPod  mode. If the system has been turned off while the iPod  was playing, pushing the ON·OFF button will start the iPod  . AUX button: When the AUX button is pushed with the system off and the iPod  conne[...]

4-68 Heater, air conditioner, audio and phone systems Seek button: Push the seek button or to skip backward or forward one track. Push and hold the seek button or for 1.5 seconds while a track is playing to reverse or fast forward the track being played. The track plays at an increased speed while reversing or fast forwarding. When the button is re[...]

JVH0735X Connecting Bluetooth  audio: T o connect your Bluetooth  audio device to the vehicle, follow the procedure below: 1. Push the button. 2. T ouch the “Settings” key . 3. T ouch the “Phone & Bluetooth” key . JVH0750X 4. T ouch the “Connect New Device” key . 5. The system acknowledges the command and asks you to initiate [...]

4-70 Heater, air conditioner, audio and phone systems SAA0451 CD/USB MEMORY CARE AND CLEANING CD . Handle a CD by its edges. Never touch the surface of the disc. Do not bend the disc. . Always place the discs in the storage case when they are not being used. . T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft [...]

VOLUME control switch Push up or down the VOLUME control switch to increase or decrease the volume. T uning switch AM and FM radio: . Push the tuning switch for less than 1.5 seconds to change the next or previous radio preset. . Push the tuning switch for more than 1.5 seconds to seek the next or previous radio station. XM/SXM operation (if so equ[...]

4-72 Heater, air conditioner, audio and phone systems SAA2102 T ype A (if so equipped) SAA2374 T ype B (if so equipped) ANTENNA T o remove the antenna, hold the bottom of the antenna and turn it counterclockwise. T o install the antenna, turn the antenna clock - wise and tighten. CAUTION . T o avoid damaging or deforming the antenna, be sure to fol[...]

CONNECT PHONE T o use this feature, a compatible smartphone must be connected via Bluetooth  or USB to the vehicle. For more information on connecting your phone, see “Bluetooth  Hands-Free Phone System (models without navigation system)” (P .4-74) or “Bluetooth  Hands-Free Phone System (models with navigation system)” (P .4- 82) .[...]

4-74 Heater, air conditioner, audio and phone systems CAUTION . Keep the antenna as far away as possible from the electronic control modules. . Keep the antenna wire more than 8 in (20 cm) away from the electronic control system harness. Do not route the antenna wire next to any harness. . Adjust the antenna standing-wave ratio as recommended by th[...]

contact a NISSAN dealer. . Y ou will not be able to use a hands-free phone under the following conditions: — Y our vehicle is outside of the cellular service area. — Y our vehicle is in an area where it is difficult to receive a cellular signal; such as in a tunnel, in an underground parking garage, near a tall building or in a mountainous area[...]

4-76 Heater, air conditioner, audio and phone systems SAA3385 Control buttons and microphone The control buttons for the Bluetooth  Hands- Free Phone System are located on the steering wheel. PHONE SEND: Push the button to initiate a VR session or answer an incoming call. Y ou can also use the button to interrupt the system feedback and give a c[...]

1. Push the ENTER/SETTING button. 2. Use the TUNE·FOLDER or TUNE·SCROLL control knob to select “Bluetooth” and then push the ENTER/SETTING button. 3. Select “Add Phone” and then push the ENTER/SETTING button. 4. When a message with a PIN appears on the screen, operate the Bluetooth  phone to enter the PIN. The connecting procedure vari[...]

4-78 Heater, air conditioner, audio and phone systems . Messaging . Select Phone Call: For more information on the “Call” command, see “Making a call” (P .4-79) . Phonebook: The following commands are available under “Phonebook”: . (A Name) Say a name in the phonebook to bring up a list of options for that phonebook entry. The system wi[...]

. Call Back Speak this command to call the number of the last incoming call to the vehicle. Messaging: Speak this command to access text messaging functions. For more information on these com- mands, see “T ext messaging” (P .4-80) . Select Phone: Speak this command to select a phone to use from a list of those phones connected to the vehicle. [...]

4-80 Heater, air conditioner, audio and phone systems another call is already active, a message will be displayed on the screen. Push the button to hold the active call and switch to the second call. Push the button to reject the second call. While the second call is active, pushing the button will allow the same commands that available during any [...]

. “Driving, can’t text” . “Call me” . “On my way” . “Running late” . “Okay” T o send one of the custom messages, say “Custom Message” . If more than one cus- tom message is stored, the system will prompt for the number of the desired custom message. For more information on setting and managing custom text mes- sages, see ?[...]

4-82 Heater, air conditioner, audio and phone systems . New T ext Sound Select to adjust the volume of the sound that plays when a new text is received by a phone connected to the Bluetooth  Hands-Free Phone System. The setting all the way to the left indicates that the new text sound will be muted. . Show Incoming T ext Select “Driver Only”[...]

SAA3446 1. V olume control switch í /+ 2. PHONE SEND button 3. PHONE END button 4. Microphone The phone button is located on the control panel can also use to control the Bluetooth  Hands-Free Phone System. (See “Control but- tons and functions (models with navigation system)” (P .4-3) .) Y our NISSAN is equipped with the Bluetooth  Hand[...]

4-84 Heater, air conditioner, audio and phone systems tooth  Hands-Free Phone System cannot charge cellular phones. . If the hands-free phone system seems to be malfunctioning, visit www.nissanusa.com/ bluetooth for troubleshooting help or con- tact your NISSAN dealer. . Some cellular phones or other devices may cause interference or a buzzing n[...]

JVH0735X CONNECTING PROCEDURE NOTE: The connecting procedure must be per- formed when the vehicle is stationary. If the vehicle starts moving during the pro- cedure, the procedure will be cancelled. 1. Push the button on the control panel. 2. T ouch the “Settings” key . 3. T ouch the “Phone & Bluetooth” key . 4. T ouch the “Connect Ne[...]

4-86 Heater, air conditioner, audio and phone systems DURING A CALL While a call is active, the following options are available on the screen: . “Handset” Select this option to switch control of the phone call over to the handset. . “Mute Mic.” Select this option to mute the microphone. Select again to unmute the microphone. . Red phone ( )[...]

Reading a received text message 1. Push the button on the steering wheel. 2. Say “Phone” after the tone. 3. Say “Read T ext” after the tone. The text message, sender and delivery time are shown on the screen. Use the tuning switch to scroll through all text messages if more than one are available. Push the button to exit the text message sc[...]

4-88 Heater, air conditioner, audio and phone systems Menu Item Result Phone Settings For detailed information, see “Phone settings” (P .4-89) . Connect New Device T ouch to connect a new Bluetooth  device to the Bluetooth  Hands-Free Phone System. Select Connected Device T ouch to choose a Bluetooth  device from a list of those device[...]

PHONE SETTINGS T o access the phone settings: 1. Push the button. 2. T ouch the “Settings” key . 3. T ouch the “Phone & Bluetooth” key . 4. T ouch the “Phone Settings” key and adjust the following settings as desired: . Sort Phonebook By: T ouch “First Name” or “Last Name” to choose how phonebook entries are alpha- betically[...]

4-90 Heater, air conditioner, audio and phone systems USING THE SY STEM Initialization When the ignition switch is in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If the button is pushed before the initialization completes, the system will announce[...]

from recognizing the voice commands cor- rectly. . Wait until a tone sounds before speaking a command. Otherwise, the command will not be received properly. . Start speaking a command within 3.5 seconds after the tone sounds. . Speak in a natural voice without pausing between words. JVH0865X S YSTEM FEA TURES NISSAN Voice Recognition can activate t[...]

4-92 Heater, air conditioner, audio and phone systems “Phone” to access various phone com- mands. If the Bluetooth  has been set to “Off”, the system announces: “Bluetooth  is off. Would you like to turn Bluetooth  on?” If no phone is connected to the system and the vehicle is stationary, the system announces: “There is no ph[...]

AUDIO S Y STEM VOICE COMMANDS T o access the audio system voice commands: 1. Push the button. 2. Say “ Audio” . 3. Speak a command from the following available commands: . Play (AM, FM, etc.) Allows user to select radio band . T une AM (number) Allows user to tune directly to a desired AM frequency . T une FM (number) Allows user to tune direct[...]

4-94 Heater, air conditioner, audio and phone systems Symptom/error message Solution The system responds “Command Not Recognized” or the system fails to recognize the command correctly. 1. Ensure that the command format is valid. Use the “List Commands” or “What Can I Say?” command under the “Help” menu. 2. Speak clearly without pau[...]

5 Starting and driving Precautions when starting and driving ................................ 5-2 Exhaust gas (carbon monoxide) ...................................... 5-2 Three-way catalyst .............................................................. 5-3 Tire Pressure Monitoring System (TPMS) .................... 5-3 Avoiding collision and rollov[...]

5-2 Starting and driving WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent op- eration of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly [...]

system, underbody, or rear of the vehicle. THREE-W A Y CA T AL Y ST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants. WARNING . The exhaust gas and the exhaust system are very hot. Keep people, animals or flammable [...]

5-4 Starting and driving mately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indi- cator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety[...]

ging a flat tire.) . When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approxi- mately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/ or system resetting. . Replacing tires with those not [...]

5-6 Starting and driving vehicle to slide sideways. Be attentive at all times, and avoid driving when tired. Never drive when under the influence of alcohol or drugs (including prescription or over-the-counter drugs which may cause drowsiness) . Always wear your seat belt as outlined in “Seat belts” (P .1-10) of this manual, and also instruct y[...]

3. When appropriate, slowly release the accel- erator pedal to gradually slow the vehicle. 4. Gradually steer the vehicle to a safe location off the road and away from traffic if possible. 5. Lightly apply the brake pedal to gradually stop the vehicle. 6. T urn on the hazard warning flashers and either contact a roadside emergency service to change[...]

5-8 Starting and driving . If your engine stalls or you cannot make it to the top of a steep hill, never attempt to turn around. Y our vehicle could tip or roll over. Always back straight down in R (Reverse) range. Never back down in N (Neu- tral) , using only the brake, as this could cause loss of control. . Heavy braking going down a hill could c[...]

passenger car. The vehicle is not designed for cornering at the same speeds as conventional passenger cars. Failure to operate this vehicle correctly could result in loss of control and/or a rollover accident. . Always use tires of the same type, size, brand, construction (bias, bias- belted or radial) , and tread pattern on all four wheels. Instal[...]

5-10 Starting and driving SSD0436 OPERA TING RANGE FOR ENGINE ST ART FUNCTION The Intelligent Key can only be used for starting the engine when the Intelligent K ey is within the specified operating range * 1 . When the Intelligent Key battery is almost discharged or strong radio waves are present near the operating location, the Intelligent Key sy[...]

illuminates when the ignition switch is in the ACC or ON position. Some indicators and warnings for operation are displayed on the meter. (See “Warning/indicator lights and audible reminders” (P .2-12) .) Continuously Variable T ransmission models The ignition lock is designed so that the ignition switch position cannot be switched to L OCK unt[...]

5-12 Starting and driving SSD0860 INTELLIGENT KEY BA TTERY DIS- CHARGE If the battery of the Intelligent K ey is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: 1. Move the shift lever to the P (Park) position (for Continuously V ariable T ransmission model[...]

1. Apply the parking brake. 2. Move the shift lever to the P (Park) or N (Neutral) position. (P is recommended.) The starter is designed not to operate unless the shift lever is in either of the above positions. Manual T ransmission (MT) models: Move the shift lever to the N (Neutral) position. Depress the clutch pedal fully to the floor. The start[...]

5-14 Starting and driving CONTINUOUSL Y V ARIABLE TRANS- MISSION (CVT) The Continuously V ariable T ransmission (CVT) in your vehicle is electronically controlled to produce maximum power and smooth operation. The recommended operating procedures for this transmission are shown on the following pages. Follow these procedures for maximum vehicle per[...]

SSD1140 T o move the shift lever, : Push the button * A while depressing the brake pedal. : Push the button * A . : Just move the shift lever. Shifting After starting the engine, fully depress the brake pedal, push the shift lever button and move the shift lever from the P (Park) position to any of the desired shift positions. WARNING Apply the par[...]

5-16 Starting and driving The engine can be started in this position. Y ou may shift to N (Neutral) and restart a stalled engine while the vehicle is moving. D (Drive) : Use this position for all normal forward driving. JVS0388X Paddle shifter (if so equipped) Manual shift mode (if so equipped) When the shift lever is shifted from the D (Drive) pos[...]

after a short period of time. If you want to return to the D (Drive) position manually , pull and hold the paddle shifter for about 1.5 seconds. M7 (7th) (except for NISMO RS models) : M8 (8th) (NISMO RS models) : Use this position for all normal forward driving at highway speeds. M6 (6th) and M5 (5th) (except for NISMO RS models) : M7 (7th) and M6[...]

5-18 Starting and driving back to the ON position. The vehicle should return to its normal operating condition. If it does not return to its normal operating condition, have a NISSAN dealer check the transmission and repair if ne- cessary. WARNING When the high fluid temperature pro- tection mode or fail-safe operation occurs, vehicle speed may be [...]

MANUAL TRANSMISSION (MT) WARNING . Do not downshift abruptly on slip- pery roads. This may cause a loss of control. . Do not over-rev the engine when shifting to a lower gear. This may cause a loss of control or engine damage. . When the high fluid temperature protection mode or fail-safe opera- tion occurs, vehicle speed may be gradually reduced. [...]

5-20 Starting and driving T o back up, pull the shift lever ring * 1 upward and then move it to the R (Reverse) gear after stopping the vehicle completely. The shift lever ring returns to its original position when the shift lever is moved to the N (Neutral) position. If it is difficult to move the shift lever into the R (Reverse) or 1st gear, shif[...]

The Integrated Control System is located below the audio system or navigation system (if so equipped) . T wo Integrated Control System modes can be selected: Drive mode and Climate Control mode. Depending on which Integrated Control System mode selected (Drive mode or Climate Control mode) , the screen display and some button functions will change.[...]

5-22 Starting and driving SSD1144 Example Three drive modes (NORMAL, SPORT and ECO) can be selected depending on the driving condition. When each mode is selected, the control state of the engine, CVT (if so equipped) , steering and climate appears on the display briefly. Each selected Drive mode (NORMAL, SPORT or ECO) is displayed at the top of th[...]

. At start up, the vehicle is automatically set to the NORMAL drive mode. SSD1146 SPORT drive mode The SPORT drive mode is recommended for an enhanced performance feel. T o set the SPORT drive mode, press the drive mode select button. The control state of the engine, CVT (if so equipped) , steering and climate control is displayed briefly. In the S[...]

5-24 Starting and driving SSD1147 ECO drive mode The ECO drive mode is recommended for maximum fuel economy. In the ECO drive mode, the engine and CVT (if so equipped) are adjusted to enhance fuel economy. T o set the ECO drive mode, press the drive mode select button and then press the ECO drive mode button. The control state of the engine, CVT (i[...]

screen. WARNING . Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident. . Do not release the parking brake from outside the vehicle. . Do not use the shift lever in place of the parking brake. When parking, be sure the parking brake is fully engaged. . Do not leave children una[...]

5-26 Starting and driving PRECAUTIONS ON CRUISE CON- TROL . If the cruise control system malfunctions, it will cancel automatically. The CRUISE in- dicator light on the meter panel will then blink to warn the driver. . If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically. . If the CRUISE in[...]

accelerator pedal. Y our vehicle will maintain the set speed. . T o pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. . The vehicle may not maintain the set speed on winding or hilly roads. If this happens, drive without the cruise control. T o cancel the preset spe[...]

5-28 Starting and driving Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use smooth accelerator and brake pedal application. . Avoid rapid starts and stops. . Use smooth, gentle accelerator and brake application whenever possible. . Maintain constant speed while commut- ing and c[...]

. Keep your engine tuned up. . Follow the recommended scheduled main- tenance. . Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy. . Keep the wheels in correct alignment. Improper alignment increases tire wear and lowers fuel economy. . Use the recommended viscosity engine oil. (See “E[...]

5-30 Starting and driving engine is running. If the AWD warning light (yellow) illumi- nates, the A WD mode indicator lights will turn off. Push the AWD mode switch, located on the instrument panel, to select 2WD, A WD-V or AWD. AWD-V : Push the A WD mode switch to the neutral (AWD-V) position. The All-Wheel Drive (AWD) A WD-V indicator light in th[...]

A WD shift tips . If the AWD mode switch is operated while making a turn, accelerating or decelerating, or if the ignition switch is turned off while in the A WD-V or AWD mode, you may feel a jolt. This is normal. . The oil temperature of power train parts will increase if the vehicle is continuously operated under conditions where the differ- ence[...]

5-32 Starting and driving warning light will either remain illuminated or blink. High-temperature power train oil due to con- tinuous operation of the vehicle to free a stuck vehicle makes the warning light blink rapidly (about twice per second) . The driving mode may change to the 2WD mode. If the warning light blinks rapidly during operation, sto[...]

SSD0488 WARNING . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. . Never leave the engine running while the vehicle is unattended. . Do not leave children unattended inside the vehicle. They could un- knowingly activate switches or con- trols. Unattended children co[...]

5-34 Starting and driving 4. Place the ignition switch in the OFF position. WARNING . If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. . When the electric power steering warning light illuminates with the engine running, the power assist for the steerin[...]

BRAKING PRECAUTION S The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. Y ou may feel a small click and hear a sound when the brake pedal is fully depressed slowly . This is not a malfunction and indicates that the brake assist mechanism is operating properly. V acuum assist[...]

5-36 Starting and driving BRAKE ASSIST When the force applied to the brake pedal exceeds a certain level, the Brake Assist is activated generating greater braking force than a conventional brake booster even with light pedal force. WARNING The Brake Assist is only an aid to assist braking operation and is not a collision warning or avoidance device[...]

indicate a malfunction. If the computer senses a malfunction, it switches the ABS off and illuminates the ABS warning light on the instrument panel. The brake system then oper- ates normally, but without anti-lock assistance. If the ABS warning light illuminates during the self-test or while driving, have the vehicle checked by a NISSAN dealer. Nor[...]

5-38 Starting and driving occurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. This is normal and is not an indication of a malfunction. WARNING . The VDC system is designed to help improve driving stability but does not prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous dri[...]

FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the Intelligent Key system. ANTI-FREEZE In the winter when it is anticipated that the outside temperature will drop below 32 8 F( 0 8 C) , check the anti-freeze t[...]

5-40 Starting and driving . Allow more stopping distance under these conditions. Braking should be started sooner than on dry pave- ment. . Allow greater following distances on slippery roads. . Watch for slippery spots (glare ice) . These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reaching [...]

6 In case of emergency Hazard warning flasher switch .............................................. 6-2 Emergency engine shut off ..................................................... 6-2 Flat tire ......................................................................................... 6-3 Tire Pressure Monitoring System (TPMS) ...................[...]

6-2 In case of emergency SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights will flash. WARNING . If stopping for an emergency, be sure to move the vehicle well off the road. . Do not use the hazard warning flashers while moving on the high- way unless unusual circumstanc[...]

TIRE PRESSURE MONIT ORING S Y S- TEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit, and the CHECK TIRE PRES (pressure) warning mes- sage is displayed in the vehicle information display, one or more of your tir[...]

6-4 In case of emergency WARNING . Make sure the parking brake is securely applied and the Manual T ransmission is shifted into R (Re- verse) , or the Continuously V ariable T ransmission into P (Park) . . Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. . Never change tires if oncoming traffic is close t[...]

SCE0947 The spare tire is located under the cargo floor board. Loosen the clamp * 2 and remove the spacer * 1 and take out the spare tire. Jacking up the vehicle and removing the damaged tire WARNING . Never get under the vehicle while it is supported only by the jack. If it is necessary to work under the vehicle, support it with safety stands. . U[...]

6-6 In case of emergency SCE0948 Jack-up point 1. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack -up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of the jack head between the notches as shown. The jack should be used[...]

SCE0933 Installing the spare tire The spare tire is designed for emergency use. (See specific instructions under the heading “ Wheels and tires” (P.8-31) .) 1. Clean any mud or dirt from the surface between the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger tight. Check that all the wheel nuts contact the wh[...]

6-8 In case of emergency heading “ Wheels and tires” (P .8-31) . T o start your engine with a booster battery, the instructions and precautions below must be followed. WARNING . If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. . Explosive hydrogen gas is [...]

SCE0981 WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle * B , position the two vehicles ( * A and * B ) to bring their batteries into close proximity to each other. Do not allow the two vehicles to touch. 2. Apply [...]

6-10 In case of emergency CAUTION Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away, place the ignition switch in the OFF position and wait 10 seconds before trying again. 9. After starting your engine, carefully discon- nect the negative cable and then the positive cable ( * 4 ? * 3 ? * 2 ? * 1[...]

Do not stop the engine. 3. T urn off the air conditioner (if so equipped) . Open all the windows, move the heater or air conditioner temperature control to maximum hot and fan control to high speed. 4. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or coolant is escaping, t[...]

6-12 In case of emergency When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. T owing instructions are available from a NISSAN dealer. Local service operators are familiar with the applicable laws and procedures for towing. T o assure pro[...]

SCE0950 T wo-wheel drive models T OWING RECOMMENDED B Y NISSAN T wo-Wheel Drive (2WD) models NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION . Never tow CVT models with the front wheels on the ground or four wheels on the ground (forward or [...]

6-14 In case of emergency SCE0952 All-wheel drive models All-Wheel Drive (A WD) models NISSAN recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. CAUTION Never tow AWD models with any of the wheels on the ground as this may cause serious and expensive damage to the powertrain.[...]

SCE0951 Front (except for NISMO models) JVE0109X Front (NISMO models) SCE0833 Front : 1. Remove the hook cover * 1 from the bumper with a suitable tool. 2. Securely install the recovery hook * 2 as illustrated. Make sure that the hook is properly secured in its original position after use. SCE0678 Rear Rear: Do not use the tie down hook to pull the[...]

6-16 In case of emergency . Never tow a vehicle using the vehi- cle tie down hook or recovery hook. . Always pull the cable straight out from the front of the vehicle. Never pull on the vehicle at an angle. . Pulling devices should be routed so they do not touch any part of the suspension, steering, brake or cool- ing systems. . Pulling devices suc[...]

7 Appearance and care Cleaning exterior ....................................................................... 7-2 Washing ................................................................................. 7-2 Waxing ................................................................................... 7-3 Removing spots ..............................[...]

7-2 Appearance and care In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surfaces, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain . after driving on coastal roads . when contaminants such as soot, bird droppings, tree sap, metal [...]

JVA0014X Model with rear spoiler CAUTION Do not use an automatic car wash for model with rear spoiler. The rear spoiler may be damaged. W AXING Regular waxing protects the paint surface and helps retain new vehicle appearance. P olishing is recommended to remove built-up wax residue and to avoid a weathered appearance before reapplying wax. A NISSA[...]

7-4 Appearance and care WHEELS Wash the wheels when washing the vehicle to maintain their appearance. . Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. . Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss of pressure or poor seal at the tire bead. . NISSAN recommen[...]

Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth dam- pened in mild soap solution, then wipe clean with a dry soft cloth. Regular care and cleaning is required in order to maintain the appearance of the leather. [...]

7-6 Appearance and care . Use only genuine NISSAN floor mats specifically designed for use in your vehicle model. See your NISSAN dealer for more informa- tion. . Properly position the mats in the floorwell using the floor mat posi- tioning aid. See “Floor mat posi- tioning aid” (P .7-6) . The use of genuine NISSAN floor mats can extend the lif[...]

belts, since these materials may se- verely weaken the seat belt webbing. MOST COMMON FACT ORS CONTRI- BUTING T O VEHICLE CORROSIO N . The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. . Damage to paint and other protective coat- ings caused by gravel and stone chips or minor traffic accidents[...]

7-8 Appearance and care Remove dirt with a vacuum cleaner. . Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them. Chemicals used for road surface deicing are extremely corrosive. They accelerate corrosion and deterioration of underbody components such as the exhaust system, fue[...]

8 Maintenance and do-it-yourself Maintenance requirement ........................................................ 8-2 Scheduled maintenance .................................................... 8-2 General maintenance ......................................................... 8-2 Where to go for service ...............................................[...]

8-2 Maintenance and do-it-yourself Some day-to-day and regular maintenance is essential to maintain your vehicle good mechan- ical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed. As the vehicle owner, you are the [...]

Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)*: When checking the tires, make sure no wheel nuts are missing, and check for any loose wheel nuts. T[...]

8-4 Maintenance and do-it-yourself Windshield defroster: Check that the air comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. Windshield wiper and washer*: Check that the wipers and washers operate properly and that the wipers do not streak. Under the hood and vehicle The maintenanc[...]

When performing any inspection or mainte- nance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precautions which should be closely observed. WARNING . Park the vehicle on a level surface, apply the parking brake securely and block the wheels to prevent the [...]

8-6 Maintenance and do-it-yourself improper servicing may result in operating difficulties or excessive emissions, and could affect your warranty coverage. If in doubt about any servicing, we recommend that it be done by a NISSAN dealer. JVC0747X MR16DDT ENGINE 1. Engine oil filler cap 2. Radiator filler cap 3. Brake and clutch* fluid reservoir 4. [...]

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not neces- sary. WARNING . Nev[...]

8-8 Maintenance and do-it-yourself SDI2641 CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level * 2 , open the reservoir cap and add coolant up to the MAX level * 1 . If the reservoir is empty , check the coolant level in the radiator when the engine is cold. If [...]

opening. Do not overfill * B . 6. Recheck oil level with the dipstick. It is normal to add some oil between oil maintenance intervals or during the break- in period, depending on the severity of operating conditions. CAUTION Oil level should be checked regularly. Operating the engine with an insuffi- cient amount of oil can damage the engine, and s[...]

8-10 Maintenance and do-it-yourself SDI2651 1. Oil filler cap 2. Oil drain plug 3. Oil filter Engine oil and filter 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 3. Remove the drain plug with a wrench and completely drain the oil. CAUTION Be careful not to burn yourself, as the engine oil is hot. . Waste oil must be[...]

WARNING . Prolonged and repeated contact with used engine oil may cause skin cancer. . T ry to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. . Keep used engine oil out of reach of children. When checking or replacement is required, we recommend a NISSAN dealer for se[...]

8-12 Maintenance and do-it-yourself For additional brake and clutch fluid information, see “Capacities and recommended fluids/lubri- cants” (P .9-2) of this manual. WARNING . Use only new fluid from a sealed container. Old, inferior or contami- nated fluid may damage the brake and clutch systems. The use of improper fluids can damage the brake [...]

Refill the reservoir more frequently when driving conditions require an increased amount of window washer fluid. Recommended fluid: Genuine NISSAN Windshield Washer Concen- trate Cleaner & Antifreeze or equivalent CAUTION . Do not substitute engine anti-freeze coolant for window washer solution. This may result in damage to the paint. . Do not [...]

8-14 Maintenance and do-it-yourself contact your skin, eyes, fabric s or painted surfaces. After touching a battery or battery cap, do not touch or rub your eyes. Thoroughly wash your hands. If the acid contacts your eyes, skin or clothing, immediately flush with water for at least 15 minutes and seek medical attention. . Do not operate the vehicle[...]

JUMP ST ARTING If jump starting is necessary, see “Jump starting” (P .6-8) . If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN dealer. CAUTION . Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not c[...]

8-16 Maintenance and do-it-yourself in poor condition or loose, have it replaced or adjusted by a NISSAN dealer. 2. Have the belt condition checked regularly. WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to remove the spark plugs. An incorrect socket[...]

SDI2667 T o remove the filter, pull the air duct * 1 upward to remove it. Pull the tabs * 2 , then pull the cover * 3 upward. The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance shown in the “NISSAN Service and Mainte- nance Guide”. When replacing the filter, wipe the inside of the air cleaner housin[...]

8-18 Maintenance and do-it-yourself CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent. Y our windshield is clean if beads do not form when rinsing[...]

SDI2693 Be careful not to clog the washer nozzle * A . This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin * B .B e careful not to damage the nozzle. Contact a NISSAN dealer if checking or replacement is required. If the brakes do not operate properly , have the brakes checked[...]

8-20 Maintenance and do-it-yourself light to moderate stops is normal and does not affect the function or performance of the brake system. Proper brake inspection intervals should be followed. For additional information, see the maintenance log section of your “NISSAN Service and Maintenance Guide” . SDI2654 ENGINE COMPARTMENT CAUTION Never use[...]

SDI1754 6. If the fuse is open * A , replace it with a new fuse * B . 7. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. The holder * 4 also contains the fuses. For checking and/or replacing, see a NISSAN dealer. SDI2642 Fusible links If any electrical equipment does not operate and the fuses are in goo[...]

8-22 Maintenance and do-it-yourself JVM0478X P ASSENGER COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight [...]

SDI2705 Extended storage fuse switch (if so equipped) T o reduce battery drain, the extended storage fuse switch comes from the factory switched off. Prior to delivery of your vehicle, the switch is pushed in (switched on) and should always remain on. If the extended storage fuse switch is not pushed in (switched on) , the meter may display a warni[...]

8-24 Maintenance and do-it-yourself SDI2451 Replace the battery in the Intelligent K ey as follows: 1. Remove the mechanical key from the In- telligent Key . 2. Insert a small screwdriver into the slit of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. 3. Replace the battery with a new one.[...]

may cause undesired operation. Note: Changes or modifications not ex- pressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada: This device complies with Industry Canada licence-exempt RSS standard(s) . Opera- tion is subject to the following two condi- tions: (1) this device ma[...]

8-26 Maintenance and do-it-yourself JVM0505X 1. Map light 2. Front fog light (if so equipped) 3. Headlight (high-beam/low-beam) 4. Front parking light 5. Front turn signal light/Front side marker light 6. Side turn signal light 7. Daytime running light (NISMO models) 8. High-mounted stop light 9. Reverse light 10. Rear turn signal light 11. Stop/ta[...]

HEADLIGHTS Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. Replacing X enon headlight model: If replacement is requ[...]

8-28 Maintenance and do-it-yourself Left side of the vehicle Disconnect the battery negative cable before replacing bulbs. 1. Remove clip * A . 2. Pull up part * B of the air duct, and then move part * C sideways. 3. Remove the air duct * D . 4. Remove back cover * E . 5. Disconnect connector * F . 6. T urn and pull out socket * G , and then remove[...]

EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight high/low beams (Xenon)* 60/35 HB3/D2S Headlight high/low beams (Halogen) 60/55 HB3/H11 Front turn signal light* 21 WY21W Front parking light* LED - Front side marker light* 5 W5W Front fog light (if so equipped)* 55 H11 Side turn signal light* LED - Daytime running light (for NISMO mo[...]

8-30 Maintenance and do-it-yourself SDI2391 Map light SDI2653 Cargo light I n f o r m a t i o n P r o v i d e d b y :[...]

If you have a flat tire, see “Flat tire” (P .6-3) . TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit, and the CHECK TIRE PRES (pressure) warning mes- sage is disp[...]

8-32 Maintenance and do-it-yourself SDI2503 Tire and Loading Information label * 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. * 2 V ehicle load limit: See “V ehicle load- ing information” (P .9-14) . * 3 Original size: The size of the tires originally installed on the vehicle at the factory . * 4 Cold[...]

SDI1949 Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. [...]

8-34 Maintenance and do-it-yourself Except for NISMO and NISMO RS models: SIZE COLD TIRE INFLA TION PRESSURE FRONT ORIGINAL TIRE P215/55R17 93V 230 kPa, 33 PSI (2WD MT models) 250 kPa, 36 PSI (2WD CVT models) 240 kPa, 35 PSI (AWD models) REAR ORIGINAL TIRE P215/55R17 93V 230 kPa, 33 PSI (2WD MT models) 250 kPa, 36 PSI (2WD CVT models) 240 kPa, 35 P[...]

For NISMO models: SIZE COLD TIRE INFLA TION PRESSURE FRONT ORIGINAL TIRE 225/45R18 95Y 230 kPa, 33 PSI (2WD MT models) 240 kPa, 35 PSI (AWD models) REAR ORIGINAL TIRE 225/45R18 95Y 230 kPa, 33 PSI (2WD MT models) 240 kPa, 35 PSI (AWD models) SPARE TIRE T135/80D16 101M (2WD models) T135/90D16 102M (AWD models) 420 kPa, 60 PSI Maintenance and do-it-y[...]

8-36 Maintenance and do-it-yourself For NISMO RS models: SIZE COLD TIRE INFLA TION PRESSURE FRONT ORIGINAL TIRE 225/45R18 95Y 230 kPa, 33 PSI (2WD MT models) 240 kPa, 35 PSI (AWD models) REAR ORIGINAL TIRE 225/45R18 95Y 230 kPa, 33 PSI (2WD MT models) 240 kPa, 35 PSI (AWD models) SPARE TIRE T135/70D17 92M 420 kPa, 60 PSI SDI1575 Example TIRE LABELI[...]

SDI1606 Example * 1 Tire size (example: P215/60R16 94H) 1. P: The “P” indicates the tire is designed for passenger vehicles. (Not all tires have this information.) 2. Three-digit number (215): This number gives the width in millimeters of the tire from sidewall edge to sidewall edge. 3. T wo-digit number (60): This number, known as the aspect r[...]

8-38 Maintenance and do-it-yourself 5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and year the tire was built. For example, the numbers 3103 means the 31st week of 2003. If these numbers are missing, then look on the other sidewall of the tire. * 3 Tire ply composition and material The number of layers or plies of rubb[...]

All season tires NISSAN specifies all season tires on some models to provide good performance all year, including snowy and icy road conditions. All Season tires are identified by ALL SEASON and/or M&S (Mud and Snow) on the tire sidewall. Snow tires have better snow traction than All Season tires and may be more appro- priate in some areas. Sum[...]

8-40 Maintenance and do-it-yourself SDI1662 CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends rotating the tires every 5,000 miles (8,000 km) . (See “Flat tire” (P .6-3) for tire replacing procedures.) As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 80 ft-lb (108 N·[...]

wear indicators are visible, the tire(s) should be replaced. . Tires degrade with age and use. Have tires, including the spare, over 6 years old checked by a qualified technician, because some tire damage may not be obvious. Replace the tires as necessary to prevent tire failure and possible personal injury. . Improper service of the spare tire may[...]

8-42 Maintenance and do-it-yourself . Do not install a damaged or de- formed wheel or tire even if it has been repaired. Such wheels or tires could have structural damage and could fail without warning. . The use of retread tire is not re- commended. . For additional information regard- ing tires, refer to “Important Tire Safety Information” (U[...]

. With the TEMPORAR Y USE ONL Y spare tire installed do not drive your vehicle at speeds faster than 50 MPH (80 km/h) . . When driving on roads covered with snow or ice, the TEMPORARY USE ONL Y spare tire should be used on the rear wheels and original tire used on the front wheels (drive wheels) . Use tire chains only on the front (original) tires.[...]

8-44 Maintenance and do-it-yourself MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

9 T echnical and consumer information Capacities and recommended fluids/lubricants ................ 9-2 Fuel information ................................................................... 9-4 Engine oil and oil filter recommendation ....................... 9-7 Air conditioning system refrigerant and lubricant recommendations ......................[...]

9-2 T echnical and consumer information The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended specifications US measure Imp mea[...]

Capacity (Approximate) Recommended specifications US measure Imp mea- sure Liter Continuously Variable T ransmission (CVT) fluid — — — Except for NISMO RS models . Genuine NISSAN CVT Fluid NS-3 . NISSAN recommends using Genuine NISSAN CVT Fluid NS-3 ONL Y in NISSAN CVT s. Do not mix with other fluids. Using fluids that are not equivalent to G[...]

9-4 T echnical and consumer information FUEL INFORMA TION Except for NISMO RS models: NISSAN recommends the use of unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Re- search octane number 96) . If unleaded premium gasoline is not available, you may use unleaded regular gasoline with an octane rating of [...]

and/or fuel system damage. . The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline. . If an oxygenate-blend, other than methanol blend is used, it should contain no more than 10% oxygenate. (MTBE may, however, be added up to 15%.) . E-15 fuel contains more than 10% oxygenate. E-15 fuel will adver[...]

9-6 T echnical and consumer information encountered, have your vehicle checked at a NISSAN dealer. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is not a cause for concern, because you get the greatest fuel benefit when there is light spark knock for a short time under heavy eng[...]

1. API certification mark 2. API service symbol ENGINE OIL AND OIL FIL TER RE- COMMENDA TION Selecting the correct oil It is essential to choose the correct grade, quality , and viscosity engine oil to ensure satisfactory engine life and performance, see “Capacities and recommended fluids/lubricants” (P .9-2) . NISSAN recommends the use of an e[...]

9-8 T echnical and consumer information The refrigerant HFC-134a (R-134a) in your NISSAN vehicle will not harm the earth’s ozone layer. Although this refrigerant does not affect the earth’s atmosphere, certain governmental regulations require the recovery and recycling of any refrigerant during automotive air condition- ing system service. A NI[...]

WHEELS AND TIRES Road wheel T ype Size Offset in (mm) Conven- tional 17 6 7J 1.85 (47) NISMO models 18 6 7J 1.85 (47) Spare 16 6 4T 1.18 (30) NISMO RS models 17 6 4T 1.18 (30) Tire T ype Size Pressure PSI (kPa) [Cold] Conven- tional P215/55- R17 93V 33 (230)*1 36 (250)*2 35 (240)*3 NISMO models 225/45R18 95Y 33 (230)*1 35 (240)*3 Spare T135/80- D16[...]

9-10 T echnical and consumer information When planning to travel in another coun- try, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. Therefore, avoid taking your vehicle [...]

STI0785 ENGINE SERIAL NUMBER The number is stamped on the engine as shown. STI0814 F .M.V.S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor Vehicle Safety Standards (F .M.V.S.S./C.M.V .S.S.) certification label is affixed as shown. This label contains valuable vehicle information, such as: Gross V ehicle Weight Ratings (GVWR) , Gross[...]

9-12 T echnical and consumer information STI0775 TIRE AND LOADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as shown. STI0776 AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is at- tached to the engine compartment as shown. I n f o r m a t i o n P [...]

JVT0347X Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. . License plate bracket . J-nut 6 2 . Screw 6 2 . Screw grommet 6 2 1. Park the vehicle on flat, level ground. 2. Locate the center position * A as illustrated. Make sure the side end surf[...]

9-14 T echnical and consumer information 8. Install the license plate bracket with the screws. 9. Install the license plate with bolts that are not longer than 0.55 in (14 mm) . WARNING . It is extremely dangerous to ride in a cargo area inside the vehi- cle. In a collision, people riding in these areas are more likely to be seriously injured or ki[...]

weight must be included as part of the cargo load. This information is located on the Tire and Loading Information label. . Cargo capacity - permissible weight of cargo, the subtracted weight of occu- pants from the load limit. VEHICLE LOAD CAP ACITY Do not exceed the load limit of your vehicle shown as “The combined weight of occu- pants and car[...]

9-16 T echnical and consumer information 4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if the XXX amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 í 750 (5 x 150) = 650 lbs) or (640 í [...]

Do not tow a trailer with your vehicle. T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION . Failure to follow these guidelines can result in severe transmission damage. . Whenever flat towing your v[...]

9-18 T echnical and consumer information DO T (Department Of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: T readwear 200 T raction A A T[...]

Y our NISSAN is covered by the following emission warranties. For USA: . Emission Defects Warranty . Emissions Performance Warranty Details of these warranties may be found with other vehicle warranties in your W arranty In- formation Booklet which comes with your NISSAN. If you did not receive a Warranty Information Booklet, or it has become lost,[...]

9-20 T echnical and consumer information (French speakers) . T o notify NISSAN of any safety concerns please contact our Consumer Information Centre toll free at 1-800-387-0122 WARNING A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testin[...]

This vehicle is equipped with an Event Data Recorder (EDR) . The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems per- formed. The EDR is designed to record data related to vehicle dynamics a[...]

9-22 T echnical and consumer information MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

10 Index A ABS (Anti-lock Braking System) ............................ 5-36 Adjusting the screen .................................................. 4-11 Advanced air bag system ......................................... 1-44 Air bag system Advanced air bag system .................................. 1-44 Front passenger air bag and status light ......[...]

10-2 Cruise control ................................................. .............. 5-26 Cup holders.................................................................. 2-43 CVT , Driving with CVT (Continuously V ariable T ransmission) ............................................... 5-14 D Daytime running light system................................[...]

Glove box....................................... ............................... 2-44 H Hazard warning flasher switch ................................... 6-2 Head restraints/headrests ........................................... 1-5 Headlights Bulb replacement ................................................. 8-27 Headlight switch ..................[...]

10-4 Manual air conditioner ................................................ 4-26 Manual front seat adjustment ..................................... 1-3 Map lights ........................................................... .......... 2-50 Mechanical key (Intelligent Key system) ................. 3-3 Meter T rip computer............................[...]

Pregnant women .................................................. 1-12 Seat belt cleaning................................................... 7-6 Seat belt extenders .............................................. 1-15 Seat belt hooks ................................................. ... 1-15 Seat belt maintenance.....................................[...]

10-6 U Underbody cleaning ..................................................... 7-3 Uniform tire quality grading ...................................... 9-18 USB (Universal Serial Bus) connection port ................................................ 4-54, 4-64 V V anity mirror.................................................................. 3-23 V [...]

FUEL INFORMA TION: Except for NISMO RS models: NISSAN recommends the use of unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Re- search octane number 96) . If unleaded premium gasoline is not available, you may use unleaded regular gasoline with an octane rating of at least 87 AKI number (Research octane[...]

NEW VEHICLE BREAK-IN PROCE- DURES RECOMMENDA TION: During the first 1,200 miles (2,000 km) of vehicle use, follow the recommendations out- lined in the “Break -in schedule” (P .5-27) of this Owner’s Manual. Follow these recommenda- tions for the future reliability and economy of your new vehicle. I n f o r m a t i o n P r o v i d e d b y :[...]

® 2015 JUK E OWN E R’S MAN UAL For y our s af ety , read car efully and keep in this v ehicle. 2015 N I SSAN J U K E F15-D F15-D Printing : September 2014 (27) Publication No.: OM15E0 0F15U0 Printed in U .S.A. T OO U M-1KA8D OM15E0 0F15U0 I n f o r m a t i o n P r o v i d e d b y :[...]