Nokia 230 T manual

Bedienungsanleitung User Guide Instrucciones de uso Käyttöohje Bruksanvisning User Guide[...]

EN Nokia hereby declares that this digital receiver , Mediamaster 230 T , is in con- formity with essential requirements and other relevant provisions of Directive 1999/5/EC. This T erminal Equipment is intended for connection to the analogue Public Switched T elephone Networks (PSTNs), in which network addressing, if provided, is by means of Dual [...]

GB 3 Quick Guide Connecting a TV and a video recorder Preparing the Remote Control Language • Select the desired menu language with cursor up / down. (Cursor = see page 9.) This will also become the main lan- guage for audio and subtitling. •W hen you now press select again to confirm your choice of language, you simultaneously start the search[...]

GB 4 Ti me adjustment The time is adjusted ± 1/2 hour at a time by using cursor up/ down . Y ou can also adjust the minutes by using cursor left/right . • Press select to finish the First time installation and watch TV channels. Quick Guide[...]

GB 5 Nokia, Nokia Connecting People and Navi Bars are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their owners. Nokia operates a policy of continuous development. Therefore we reserve the right to make changes and improvements to any of the products described in th[...]

GB 6 Nokia Mediamaster software end-user license IMPORT ANT : READ CAREFULL Y BEFORE OR USING THE SOFTW ARE NOKIA CORPORA TION, NOKIA HOME COMMUNICA TIONS END-USER SOFTWARE AGREEMENT This Software Agreement (“Agreement”) is between Y ou (either an individual or an entity), the End User , and Nokia Corporation, Nokia Home Communications (“Noki[...]

GB 7 Nokia Mediamaster software end-user license without notice from Nokia if Y ou fail to comply with any provision of this Agreement. In such an event, Y ou must immediately return at Y our own cost, this Nokia digital TV receiver , and all related material to the place of purchase. 6. NO OTHER OBLIGA TIONS. This Agreement creates no obligations [...]

GB 8 General information about the Mediamaster Throughout this manual you will notice that the everyday operation of your Mediamaster is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your Mediamaster , guiding you through installation, channel selec- tion, viewing and many other functio[...]

GB 9 Press once to turn the sound off/on (mute). Press and hold for a few seconds to switch the Mediamaster in and out of standby mode. 0 - 9 Change channel and to select individual menu options. Note: If 0 is entered as the first digit, the TV Release func- tionality is activated (see below). 0 To toggle between the 230 T and any equipment connect[...]

GB 10 Front panel Front and rear panel AUDIO L R RCA connectors stereo outputs for con- nection to an analogue HiFi system TV SCART for connection to the TV AUX SCART for connection to a VCR or a satellite receiver DIGIT AL AUDIO RCA connector S/PDIF digital out- put for connection to a HiFi system Mains cable 110-240 V AC 50-60 Hz TV aerial for an[...]

GB 11 General To be able to receive terrestrial scrambled digital channels you will need a CA module and a smart card from a Service Provider . There are a few different CA modules on the European market. Each one of the CA modules support a certain kind of encryption system. The Mediamaster supports CA modules which are made to work according to t[...]

GB 12 The box for your Mediamaster should contain the following items: •t he Mediamaster •r emote control with 2 AAA batteries • SCART cable (fully connected; 1,0 metre) • mains cable • RF cable • Owner’ s manual with software license agreement Connecting the Mediamaster About the SCART sockets The rear panel of the Mediamaster is equ[...]

GB 13 Connecting the Mediamaster Please note the following: • In some block of flats, the roof-mounted aerial system includes a filter and channel selector . If so, the aerial will probably not work with the Mediamaster . Please consult the landlord. •M any older roof-mounted aerials may only receive a limited number of channels. As a result, d[...]

GB 14 Connecting the Mediamaster Connection of a video recorder • Connect a SCART cable between the main SCAR T socket on the TV and the TV SCART socket on the Mediamaster . • Connect an RF cable from the TV/VCR output on the Media- master to the RF input socket on the video. • Connect the TV aerial to the TV AERIAL input socket on the Mediam[...]

GB 15 Connecting the Mediamaster Procedure when RF connections are used This procedure is necessary only when your Mediamaster is connected to the TV with an RF lead and no SCAR T leads are used. To tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable[...]

GB 16 General information Once you have correctly connected the Mediamaster , you also have to perform a “First time installation.” During this procedure, helpful information is displayed at the bot- tom of the menus. Please note! The select button always confirms a selection within these menus, and pressing it will take you to the next step in[...]

GB 17 First time installation Channel search in progress This menu will be shown as long as the Mediamaster is search- ing for TV and radio channels. All channels found will be listed on the screen. Please note that the search procedure may take a few minutes. Y ou can cancel the search at any time by pressing select . Ti me adjustment The time is [...]

GB 18 V iewing mode Programme information Every time you change channels you will receive programme in- formation for a few seconds. (In the Control folder/User prefer - ences’ menu you can select how long this information will be shown.) The information may include: Current time. Channel list. Channel number and name. Name of the current and nex[...]

GB 19 V iewing mode Extended programme information The Mediamaster can display information about programmes cur - rently being broadcasted as well as those that will be broadcasted next. This procedure is the same for both TV and radio mode. By pressing info while watching TV you will get the “Programme information” banner . Press info again to[...]

GB 20 V iewing mode T eletext Pressing txt will open a teletext page (if teletext is transmitted.) Select teletext pages with the numeric buttons on the remote control. See figure 1. Y ou can also quickly go to the different page alternatives shown in any page by pressing cursor left / right . •P ress select on a highlighted page number to go to [...]

GB 21 Navi Bars General information •P ress select to open the Navi Bars . In order to select TV and radio channels and to change system settings you will use the Navi Bars. The horizontal row contains folders , e. g. All TV , Settings and so on. Their names are shown with black text at the bottom of each folder . Each folder contains bookmarks .[...]

GB 22 Navi Bars Banner T ime-out When you switch channels, an information banner will be shown for a few seconds. Y ou can select how long the banner will be shown. Vo lume bar Select whether or not you want the volume bar to appear on the screen when you change the volume. Vo lume bar time-out Select how long the volume bar will be visible on the [...]

GB 23 Control folder ☛ Edit channels From these menus you can create and edit favourite channel lists. Y ou can add, delete, rename and arrange the order of the chan- nels within the favourite lists. The “All TV” list might contain lots of channels. B y creating your own favourite lists you can make channel handling more convenient. Important[...]

GB 24 • Enter the name as follows : Press the numerical button corresponding to the character you want: once for the first character , twice for the second and so on. The available characters are listed below . •I f the next letter is located on the same key as the present one, wait for the time-out or press cursor right to move one posi- tion [...]

GB 25 Navi Bars Add/Delete channels From this menu you add and remove the channels in your favour - ite lists. Y ou use the “All TV” or “All radio” list as basis to select the channels from. A channel is added or removed from the list by pressing info . The square to the right on a line will be empty for removed channels, and will contain a[...]

GB 26 Navi Bars V iewing images received from an external device. (Bluetooth connection) General 230 T is equipped with a built in Bluetooth module that makes it possible to receive, watch and also save digital images transmit- ted from an external device. This device must be equipped with the Bluetooth Standard V ersion 1.1 and “Object Push Prof[...]

GB 27 Navi Bars Local device name The 230 T is named Mediamaster on this line. This is also the name the external device will find during its search procedure. Y ou can enter another name with the number buttons on the re- mote control. Press any number button and a keyboard will be shown on the screen. How to enter a new name, please refer to page[...]

GB 28 Navi Bars Control folder ☛ T i me r General Y ou can make the Mediamaster to start and stop at a predefined time. The timer function is very useful when you want to record a pro- gramme and you are unable to start/stop the recording event yourself, or when you just want to be reminded of the start of a programme you do not want to miss. Not[...]

GB 29 Navi Bars Settings folder ☛ Channel When you want to search for channels at a later time. T o open this menu you will be asked to enter your access code. From the factory the access code is set to 1234 . A channel search procedure can be performed in different ways: Automatic, Manual or Advanced manual search. Automatic search •H ighlight[...]

GB 30 Navi Bars Settings folder ☛ T V To open this menu you will be asked to enter your access code. From the factory the access code is set to 1234 . From here you can adjust the audio/video settings for your Media- master . TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens. Select 16:9 for [...]

GB 31 Navi Bars Settings folder ☛ Access To open this menu you will be asked to enter your access code. From the factory the access code is set to 1234 . The following settings can be altered from this menu. Access Control Select “Y es” or “No” to turn the access control in all menus on or off. Note: Even when “No” is selected, the ac[...]

GB 32 Navi Bars Games folder •W hen the Games folder is in focus, select a game and press info to get instructions how to play it. •P ress select to start a game. •P ress back to finish a game. Settings folder ☛ Reinstall Use this option only if you have to start the complete installation procedure from scratch. If you continue from here, a[...]

GB 33 PCR Program Clock Reference. PID Packet Identifier . RCA Coaxial connector used to connect the Mediamaster to an external amplifier . RF Radio frequency (known as HF in some countries). RGB Red, Green, Blue. Colour signals are routed in separate cables in order to provide a high quality TV picture. SERIAL RS 232 A serial communication standar[...]

GB 34 What to do Check that the mains cable is plugged into the power socket. Press the standby button to bring the Mediamaster out of standby mode. Change both batteries. Aim the remote control at box. Check that nothing blocks the front panel. Contact your Service Provider . They will help you set it up again. Check the aerial installation includ[...]

GB 35 T echnical specifications T ransmission Standards DVB, MPEG 2, OFDM Input/output Input connector IEC female RF input frequency 174-300; 474-862 MHz RF input power level -78 to -30 dBm RF impedance 75 Ω Frequency range Loop through 47-862MHz Frequency range RF modulator 470-862 MHz Output channel CH 21-69 Preset channel 43 Output signal P AL[...]

Nokia is a registered trademark of Nokia Corporation www .nokia.com 00002958.00[...]