Nortel Networks NN46200-310 manual

Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply Release: 4.1 Document Revision: 01.01 www.nortel.com NN46200-310 (324629-A Rev 01) .[...]

Nortel Ethernet Routing Switch 8300 Release: 4.1 Publication: NN46200-310 Document status: Standard Document release date: 9 June 2008 Copyright © 2008 Nortel Networks All Rights Reserved. Printed in Canada and the United States of America LEGAL NOTICE While the information in this document is believed to be accurate and reliable, except as otherw[...]

3 . Contents Regulatory information and safety precautions 5 European Union and European Free Trade Association (EFTA) notice 7 Safety messages 10 Notices 10 Software license 15 New in this Release 19 Features 19 Other changes 19 Document changes 19 Introduction 21 Task and estimated time 21 DC power supply fundamentals 23 Navigation 23 Power suppl[...]

4 Technical specifications 47 Technical specifications navigation 47 Model 8005DI DC power supply 47 DC input power specifications 47 DC output power specifications 47 Model 8005DC power supply 48 DC input power specifications 48 DC output power specifications 48 Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01[...]

5 . Regulatory information and saf ety precautions International regulatory statements of conformity This is to certify that the Nortel Networks 8300 series chassis and components installed within the chassis were evaluated to the international regulatory standards for electromagnetic compliance (EMC) and safety and were found to have met the requi[...]

6 Regulatory information and safety precautions ICES statement (Canada only) Canadian Department of Communications Radio Interference Regulations This digital apparatus (8300 series chassis and installed components) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations o[...]

National electromagnetic compliance (EMC) statements of compliance 7 EN 300386 statement The Ethernet Routing Switch 8300 series chassis complies with the requirements of EN 300386 V1.3.3 for emissions and for immunity for a Class A device intended for use in either Telecommunications centre or locations other than telecommunications centres given [...]

8 Regulatory information and safety precautions MIC notice for 8310 and 8306 chassis (Republic of Korea only) This device has been approved for use in Business applications only per the Class A requirements of the Republic of Korea Ministry of Information and Communications (MIC). This device may not be sold for use in a nonbusiness application. Na[...]

National safety statements of compliance 9 Exporter: Nortel Networks, Inc. 4655 Great America Parkway Santa Clara CA 95054 USA Importer: Nortel Networks de México, S.A. de C.V. Avenida Insurgentes Sur #1605 Piso 30, Oficina Col. San Jose Insurgentes Deleg-Benito Juarez México D.F. 03900 Tel: 52 5 480 2100 Fax: 52 5 480 2199 Input: Model 8005DC: 4[...]

10 Regulatory information and safety precautions Piso 30, Oficina Col. San Jose Insurgentes Deleg-Benito Juarez México D.F. 03900 Tel: 52 5 480 2100 Fax: 52 5 480 2199 Embarcar a: Model 8005DC: -48 VCD, 29 A una fuente, una fuente + configuraciones de una fuente redundante, dos fuentes o dos + configuraciones de una fuente redundante Model 8005DI [...]

Safety messages 11 Attention notice ATTENTION An attention notice provides important information regarding the installation and operation of Nortel products. Caution ESD notice CAUTION ESD ESD notices provide information about how to avoid discharge of static electricity and subsequent damage to Nortel products. CAUTION ESD (décharge électrostati[...]

12 Regulatory information and safety precautions CAUTION ATTENTION La mention Attention fournit des informations sur les moyens de prévenir une perturbation possible du service et d’éviter d’endommager les produits Nortel. CAUTION ACHTUNG Achtungshinweise bieten Informationen dazu, wie man mögliche Dienstunterbrechungen oder Schäden an Nort[...]

Safety messages 13 WARNING ADVERTENCIA Los avisos de Advertencia brindan información acerca de cómo prevenir las lesiones a personas al trabajar con productos Nortel. WARNING AVISO Os avisos oferecem informações sobre como evitar ferimentos ao trabalhar com os produtos da Nortel. WARNING AVVISO Le indicazioni di avviso forniscono informazioni p[...]

14 Regulatory information and safety precautions DANGER PERICOLO Le indicazioni Pericolo—Alta tensione forniscono informazioni per evitare situazioni o condizioni che potrebbero causare gravi danni alle persone o il decesso a causa dell’alta tensione o di scosse elettriche. Danger notice DANGER Danger notices provide information about how to av[...]

15 . Software license This section contains the Nortel Networks software license. Nortel Networks Inc. software license agreement This Software License Agreement ("License Agreement") is between you, the end-user ("Customer") and Nortel Networks Corporation and its subsidiaries and affiliates ("Nortel Networks"). PLEAS[...]

16 Software license of this Agreement. Customer shall not a) use, copy, modify, transfer or distribute the Software except as expressly authorized; b) reverse assemble, reverse compile, reverse engineer or otherwise translate the Software; c) create derivative works or modifications unless expressly authorized; or d) sublicense, rent or lease the S[...]

Nortel Networks Inc. software license agreement 17 software documentation and, in the event Software is licensed for or on behalf of the United States Government, the respective rights to the software and software documentation are governed by Nortel Networks standard commercial license in accordance with U.S. Federal Regulations at 48 C.F.R. Secti[...]

18 Software license Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .[...]

19 . Ne w in this Release The following sections detail what’s new in Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply, NN46200-310 for Release 4.1: • “Features” (page 19) • “Other changes” (page 19) Features The 8005DC and 8005DI DC is a new feature for the Ethernet Routing Switch 8300. Other changes See the follo[...]

20 New in this Release Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .[...]

21 . Intr oduction This guide provides information about the 8005 Dual Input (DI) DC and 8005DC power supplies used in the Ethernet Routing Switch 8300. The guide also includes instructions for adding and replacing this DC power supply in the following Ethernet Routing Switch 8300 chassis models: • 8306 Chassis • 8310 Chassis ATTENTION This gui[...]

22 Introduction Table 1 Task and estimated time Task Estimated Time Preparing cable for installation 5 minutes for each power supply Removing the power filler panel 1 minute for each power supply Installing the DC power supply 2 minutes for each power supply Removing the DC power supply cover 1 minute for each power supply Cabling the DC power supp[...]

23 . DC po wer suppl y fundamentals This section provides the basic information about the Ethernet Routing Switch 8300 DC power supplies. Navigation • “Power supply LED” (page 23) • “Ethernet Routing Switch 8300 series chassis” (page 24) • “8005DI DC power supply” (page 24) • “8005DC power supply” (page 25) • “Redundant [...]

24 DC power supply fundamentals In addition to the DC power supply and the installation guide, your DC power supply shipment contains several hardware accessories. Verify that the items in the shipping container match those on the shipment packing list. Use the following table as a checklist to verify the contents of the DC power supply shipping co[...]

8005DC power supply 25 Minimum number of 8005DI DC power supplies to install To configure an Ethernet Routing Switch 8300 system, consider the total power consumption to ensure proper system performance. The total input power consumption of the components (modules and fan trays) must not exceed the 8005DI DC power supply rating. To determine the mi[...]

26 DC power supply fundamentals Minimum number of 8005DC power supplies to install To configure an Ethernet Routing Switch 8300 system, consider the total power consumption to ensure proper system performance. The total input power consumption of the components (modules and fan trays or cooling modules) must not exceed the 8005DC power supply ratin[...]

27 . DC po wer suppl y installation This chapter provides instructions to install the DC power supply in the Ethernet Routing Switch 8300 chassis. See Nortel Ethernet Routing Switch 8300 Administration, NN46200-604 for the minimum Ethernet Routing Switch 8300 software version required to support the hardware. ATTENTION Nortel recommends that you in[...]

28 DC power supply installation DC power supply installation navigation • “Determining the minimum number of DC power supplies” (page 28) • “Preparing cables for installation” (page 29) • “Removing the power filler panel” (page 30) • “Installing the DC power supply” (page 31) Determining the minimum n umber of DC power suppl[...]

Preparing cables for installation 29 For more information, see Nortel Ethernet Routing Switch 8300 Installation — Chassis, NN46200-309 . Procedure steps Step Action 1 Add the total (3.3 V and 12 V) input power consumption (wattage) for all components (modules and fan trays or cooling modules). 2 Refer to the output power rating of the power suppl[...]

30 DC power supply installation 1 Strip 0.81 in. (2.1 cm) of insulation from the ends of the cables. 2 Crimp the lugs onto the cables using a standard crimping tool. CAUTION Risk of injury by electric shock Failure to properly crimp the lugs onto the cables constitutes a safety hazard. 3 If necessary, use a heat gun to shrink the tubing around the [...]

Installing the DC power supply 31 CAUTION To maintain proper cooling, never operate the chassis with an empty power supply bay. If you replace a failed power supply and you have no power filler panel, leave the failed power supply installed until a replacement power supply is available. Procedure steps Step Action 1 Use a Phillips screwdriver to lo[...]

32 DC power supply installation CAUTION Risk of equipment damage To prevent damage from electrostatic discharge, always wear an antistatic wrist strap connected to an ESD jack. DANGER Risk of injury by electric shock Before working on this equipment, be aware of proper safety practices and the hazards involved with electrical circuits. Use only pow[...]

Installing the DC power supply 33 5 Push the new power supply partway into the bay, leaving the terminal block at the side of the power supply exposed. See “Job aid: Inserting the DC power supply” (page 36) . 6 Use a Phillips screwdriver to remove the screw that secures the plastic safety cover to the power supply and remove the cover. Set the [...]

34 DC power supply installation 10 Attach the positive voltage lead to the positive terminal on the power supply and insert a lock washer between the crimp lug and each hex nut. 11 Attach the negative voltage lead to the negative terminal on the power supply to insert a lock washer between the crimp lug and each hex nut. 12 Use a 7/16 inch hex wren[...]

Installing the DC power supply 35 15 Firmly slide the power supply all the way into the bay. See “Job aid: Tightening the retaining screws on the DC power supply” (page 37) . 16 Tighten the retaining screws to firmly seat the power supply. 17 Attach the positive and negative terminal leads to the DC input power source according to the proper sa[...]

36 DC power supply installation Job aid: Inserting the DC power supply Figure 1 Inserting the DC power supply: 8306 and 8310 chassis Job aid: DC power supply input and ground stud location Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .[...]

Installing the DC power supply 37 Job aid: Attaching the earth ground lead to the ground stud Job aid: Tightening the retaining screws on the DC power supply Figure 2 Tightening the retaining screws on the DC power supply: 8306 and 8310 chassis Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 20[...]

38 DC power supply installation Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .[...]

39 . T ranslations of safety messages This section provides translations of the different precautionary notices used in this document. Notices CAUTION This device is a Class A product. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users are required to take appropriate measures necessary to[...]

40 Translations of safety messages CAUTION CUIDADO Este dispositivo é um produto Classe A. Operar este equipamento em uma área residencial provavelmente causará interferência prejudicial; neste caso, espera-se que os usuários tomem as medidas necessárias para corrigir a interferência por sua própria conta. CAUTION ATTENZIONE Questo disposit[...]

Notices 41 CAUTION PRECAUCIÓN Riesgo de daños en los equipos Controle que el cable de conexión que utilice con la fuente de alimentación de CC sea el adecuado. Para determinar qué cables debe utilizar, evalúe el calibre, la inflamabilidad y la funcionalidad mecánica. CAUTION CUIDADO Risco de danos ao equipamento Verifique se o cabo de conex?[...]

42 Translations of safety messages CAUTION PRECAUCIÓN Riesgo de daño del equipo Para prevenir el daño producido por una descarga electrostática, use siempre una pulsera antiestática conectada a un enchufe ESD. CAUTION CUIDADO Risco de danos ao equipamento Para evitar danos com descarga eletrostática, sempre use uma pulseira antiestática que [...]

Notices 43 DANGER PERIGO Risco de ferimento por choque elétrico Enrolar os suportes aos cabos de maneira incorreta implica em um risco de segurança. DANGER PERICOLO Rischio di lesioni per shock elettrico Il piegamento non corretto delle linguette nei cavi costituisce un rischio per la sicurezza. CAUTION To maintain proper cooling, never operate t[...]

44 Translations of safety messages CAUTION CUIDADO Para manter o resfriamento adequado, nunca opere o Ethernet Routing Switch 8300 com um compartimento de fonte de alimentação vazio. Se você estiver substituindo uma fonte de alimentação com defeito e não tiver um painel de preenchimento de energia, deixe fonte com defeito instalada até que a[...]

Notices 45 CAUTION ATTENZIONE Conservare il pannello di riempimento dell’alimentatore nel caso in cui sia necessario utilizzare il Ethernet Routing Switch 8300 con l’alimentatore rimosso. Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .[...]

46 Translations of safety messages Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .[...]

47 . Appendix T echnical specifications This appendix lists the electrical specifications for the 8005DI DC power supplies. T ec hnical specifications navigation • “Model 8005DI DC power supply” (page 47) • “Model 8005DC power supply” (page 48) Model 8005DI DC power supply This section provides power ratings for the 8005DI DC input po[...]

48 Technical specifications Table 5 DC output power specifications for Model 8005DI DC power supply Parameter Specifications Output power (maximum) 1462 W continuous, 1660 W peak with forced air cooling Modules 3.3 V @ 150 A 12 V @ 72 A Fans 12 VDC @ 7.5 A/ 24 A peak MTBF 108 803 hr (Bellcore TR–332 standard) Model 8005DC power suppl y This secti[...]

Model 8005DC power supply 49 Table 7 DC output power specifications for Model 8005DC power supply (cont’d.) Parameter Specifications Fans 12 VDC @ 7.5 A/ 24 A peak MTBF 108 803 hr (Bellcore TR–332 standard) Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networ[...]

50 Technical specifications Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .[...]

[...]

Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply Copyright © 2008 Nortel Networks All Rights Reserved. Printed in Canada and the United States of America Release: 4.1 Publication: NN46200-310 Document status: Standard Document revision: 01.01 Document release date: 9 June 2008 To provide feedback or to report a problem in this [...]