Olympia Protect 6061 manual

R Protect 6XXX Series Wireless Alarm System Instruction Manual 17.12.2012 en[...]

Olympia Business Systems Vertriebs GmbH Zum Kraftwerk 1 45527 Hattingen[...]

Contents Giu OPERATING INSTRUCTIONS 3 Page Introduction 5 .................................... Warranty 5 .................................................. User Information 5 ........................................... Disclaimer of Liability 5 ........................................ Intended Use 5 .............................................. P[...]

Contents OPERATING INSTRUCTIONS Giu 4 Page Panic Alarm 24 .................................... Emergency Call (SOS) 24 .......................... Remote Access Via Telephone 25 .................. Resetting the Factory Settings (RESET) 26 .......... Registering Sensors 27 ............................ Deregistering Sensors 27 ........................[...]

Introduction Giu OPERATING INSTRUCTIONS 5 Page Introduction Warranty Dear Customer, we are pleased that you have chosen this equipment. In the case of a defect, please return the device together with the receipt and original packing material to the point-of-sale. User Information The alarm system is a passive security product and has been conceived[...]

Product Features / Scope of Delivery OPERATING INSTRUCTIONS Giu 6 Page Product Features S Wireless alarm system with emergency call, panic, room screening and handsfree functions. S Transmit function to activate outdoor sirens etc. S Integrated telephone dialling unit with outgoing message. S Up to 10 alarm call numbers and 1 emergency call number [...]

Safety Information Giu OPERATING INSTRUCTIONS 7 Page Safety Information Significance of the Symbols WARNING: Indicates potentially dangerous situations which could lead to fatal or severe personal injury if the information is ignored. CAUTION: Indicates potentially dangerous situations which could lead to minor personal injury if the information is[...]

Installation OPERATING INSTRUCTIONS Giu 8 Page Installation, Base Unit Information on Selecting the Installation Location S The base unit should be installed or positioned in a central location (e.g. in the hallway of an apartment/house) in relation to the area to be monitored in order to keep all transmission paths as short as possible. S Place th[...]

Installation Giu OPERATING INSTRUCTIONS 9 Page Positioning the Base Unit It is possible to setup the device in a user-friendly, inclined position on a table or desk. To do this, insert the two legs (1) supplied in the recesses for the wall installation bracket (2) on the rear of the base unit. 1 Wall Installation After having found a suitable locat[...]

Operating Elements and Indicators OPERATING INSTRUCTIONS Giu 10 Page Operating Elements and Indicators The base unit is equipped with an SOS (emergency call) button for emer gency situations and a Panic button in the event of a direct threat. The wireless remote control unit is provided with a button which can be con figured either as an Emer[...]

Operating Elements and Indicators Giu OPERATING INSTRUCTIONS 11 Page  At Home mode: The system is armed; on burglary, the acoustic alarm signal is issued 0-9, *, # Digit keys: On pressing the # button >3 sec., a 2 sec. dialling pause is activated * In Text mode: Switch between upper and lower case # à á â Ç 0 + & @ 0 / % * # $ £ O §[...]

Operating Elements and Indicators OPERATING INSTRUCTIONS Giu 12 Page h Save icon  Battery indicator Battery capacity of base unit is low. Overview of LEDs With power supply Without power supply Top LED (red) Bottom LED (yellow) Top LED (red) Bottom LED (yellow) Silent mode Lights up Flashes Off Flashes Alarm mode Flashes Off Flashes Off At Home [...]

Menu Structure Giu OPERATING INSTRUCTIONS 13 Page Menu Structure  Review Open Sensor01 Voice Record Remote:1 Voice Record Register Search… Open Sensor01 Voice Record Remote:1 Voice Record Trigger Delay Duration Delay: 0-240S Trigger Tone On Off Arming Delay Delay: 0-240S Flood&Smoke Standard Activate Remote Key Remote: SOS Remote: PA[...]

Menu Structure OPERATING INSTRUCTIONS Giu 14 Page Key Tone Key Tone-On Key Tone-Off Contrast Contrast-1-5 Language Deutsch Español Nederlands Dansk Português English Français Date/Time 01-01-2010 00:00 Alarm period Time:1-10Min[...]

Configuration Giu OPERATING INSTRUCTIONS 15 Page Configuration General Information NOTE: Before beginning to operate the base unit, de activate the key lock function. You need the 4-digit Entry Code to do this. The default, device-specific Entry Code is provided in the battery compartment of the base unit. The key lock is reactivated automatical[...]

Configuration OPERATING INSTRUCTIONS Giu 16 Page Setting the Date/Time 1. Enter the device-specific Entry Code. Confirm it by pressing  . 2. The menu is opened by pressing the Menu button  briefly. 3. Select the Date/Time menu option. Confirm it by pressing  . 4. Display: 01-01-2010 . 5. Use the keypad on the base unit to enter the day, mo[...]

Configuration Giu OPERATING INSTRUCTIONS 17 Page Activating the Internal Telephone Dialling Unit with OGM Function The internal telephone dialling unit is deactivated if no telephone numbers have been entered and saved. You can enter up to 10 individual telephone or mobile phone numbers of contact persons, such as relatives, friends or neighbours. [...]

Configuration OPERATING INSTRUCTIONS Giu 18 Page After having entered phone numbers, ensure that they are correct in re spect of the alarm calls. You can do this by triggering a silent alarm. The telephone numbers you have entered are dialled in succession in the pro grammed sequence. 1. Enter the device-specific Entry Code. Confirm it by pre[...]

Configuration Giu OPERATING INSTRUCTIONS 19 Page Trigger Delay The alarm is triggered after a delay so that if someone enters through the main door, they can disarm the alarm system before the acoustic alarm and internal telephone dialling unit are activated. You can set a trigger delay between 0 and 240 seconds. If one of the sensors is tripped, t[...]

Configuration OPERATING INSTRUCTIONS Giu 20 Page Alarm Period The base unit is equipped with an integrated siren. The duration of the acoustic alarm can be selected between a minimum of 1 minute to a max imum of 10 minutes. The alarm period is preset to 3 minutes (an alarm period up to 3 minutes is permitted in Germany!). 1. Enter the device-spe[...]

Configuration Giu OPERATING INSTRUCTIONS 21 Page Remote Control The  button on the remote control can be configured as an SOS (emer gency call) or Panic button via the base unit. Proceed as follows to configure the button: 1. Enter the device-specific Entry Code. Confirm it by pressing  . 2. The menu is opened by pressing the Menu button ?[...]

Monitoring Functions OPERATING INSTRUCTIONS Giu 22 Page Overview of Monitoring Functions Monitoring function Acoustic alarm signal Internal telephone dialling unit activated Silent mode No Yes with screening function Alarm mode Yes Yes At Home mode Yes No Disarmed mode No No Emergency call (SOS) No Yes with handsfree function Panic alarm Yes No Swi[...]

Monitoring Functions Giu OPERATING INSTRUCTIONS 23 Page You can define the required type of alarm as follows using either the base unit or the remote control unit supplied: NOTE: If an outdoor siren is registered on the base unit, the alarm can only be stopped by the re mote control unit after 15 seconds at the earli est. Alarm Mode NOTE: You[...]

Monitoring Functions OPERATING INSTRUCTIONS Giu 24 Page Disarmed Mode NOTE: When the system is disarmed, you can move freely within the living quarters without trigger ing any alarms. Base unit 1. Enter the device-specific Entry Code. Confirm it by pressing  . Remote control 1. Press the  button. Panic Alarm You can activate a panic alarm [...]

Remote Access Via Telephone Giu OPERATING INSTRUCTIONS 25 Page Remote Access Via Telephone The wireless alarm system can be operated by remote access using a telephone. You can use a telephone to activate or deactivate the alarm system and switch the handsfree and screening functions on. NOTE: The base unit takes your call after 8 rings. An swer[...]

Resetting the Factory Settings (RESET) OPERATING INSTRUCTIONS Giu 26 Page Resetting the Factory Settings (RESET) NOTE: Please note that when carrying out a RESET, all the user settings are deleted. The registra tion of the sensors is retained! After a RESET has been executed, the 4-digit Entry Code is 1-2-3-4! Proceed as follows to reset the fac[...]

Registering and Deregistering Sensors / System Extention Giu OPERATING INSTRUCTIONS 27 Page Registering Sensors Up to 32 sensors can be registered on the wireless alarm system. If you purchase optionally available sensors, such as additional remote controls, smoke detectors etc., they must be registered manually. Proceed as follows to register the [...]

Changing the Batteries OPERATING INSTRUCTIONS Giu 28 Page Changing the Batteries If the battery charge of the sensors is low or practically empty, the following status messages appear in the display: Battery capacity low 1. bAtt Lo appears in the display. The sensor affected, e.g. Open Sen sor01 , is displayed. 2. If you activate the alarm syste[...]

Regular Maintenance and Servicing Giu OPERATING INSTRUCTIONS 29 Page Regular Maintenance and Servicing Base Unit 1. Disconnect the base unit from the power outlet before cleaning it! 2. Clean the surface of the housing with a soft, lint-free cloth. Never use any chemicals or scouring agents. NOTE: Never immerse the equipment in water![...]

Information on Disposal OPERATING INSTRUCTIONS Giu 30 Page Information on Disposal The implementation of European law in national laws and direct ives obliges you to dispose of consumable goods appropriately. This serves to protect both persons and the environment. The adjacent symbol indicates that electrical and electronic apparat us and ba[...]

Technical Data Giu OPERATING INSTRUCTIONS 31 Page Technical Data The wireless alarm systems in the Protect6XXX-Series operate within the frequency band specially reserved for security technology in the 868 MHz frequency range. This ensures that interference to the wireless alarm sys tem by other consumer products, such as baby monitors, is ru[...]

CE-Mark OPERATING INSTRUCTIONS Giu 32 Page CE Mark The device fulfils the requirements stipulated in the EU Directive: S 1999/5/EC (R&TTE) The CE Mark on the device confirms conformity.[...]

Empty Page[...]

Empty Page  6HLWH[...]

Empty Page[...]

 6HLWH PIN Code This is your individual, preset PIN code! If you want to change this predefined PIN code, please refer to Chapter "Configuration" in this operating instruction manual. Keep this operating manual in a safe place away from the wireless alarm system! Please note that the Copyright of this operating instruction manual is[...]