Onkyo TX-SR333 manual

TX-SR333 A V RECEIVER Basic Manual Adv anced Manual f ound here http://www .onkyo.com/m anual/txsr333/adv/en.html E n[...]

2 About the Basic Manual The Basic Manual leads you through the fundamental steps to enjoy the A V Receiv er from connections to TV , speaker system and playbac k devices , to necessar y functions for playbac k. As well as that, Basic Manual inf orms you with the instructions on frequently used functions. Besides, there is another par t of the manu[...]

Step 1: Connections 3 1 Connecting the TV and pla yers Important : The power cord must be connected only after all other connections are completed. HDMI Cable Connection The unit has many HDMI jac ks on its rear panel and each of them corresponds to an input selector button of the same name on the front panel. F or example, a Blu-r ay Disc pla yer [...]

4 Step 1: Connections r T o pla y 4K or 1080p video , use the high speed HDMI cable . Connecting Components without HDMI If your A V component does not hav e HDMI jack, use an av ailable jac k of your component for cab le connection with this unit. Just as the HDMI jac ks, other jacks on this unit ha ve a preassigned input selector button on the[...]

5 Step 1: Connections 2 Connecting speakers Important : The power cord must be connected only after all other connections are completed. 45 12 3 6 12 F ront speakers 3 Center speaker 45 Surround speakers 6 Subwoof er r Only one subwoof er can be connected. r T o use the ZONE function, ref er to the section 6 "Using the multi-zone functio[...]

6 Step 1: Connections maximum frequency . If your subwoof er does not hav e built-in power amplifier , you can connect a power amplifier betw een the unit and the subwoof er . r The speaker setting is 5.1 ch at the time of purchase . Change the setting when you use a configuration other than 5.1 ch. r Shor t-circuiting the + cable and - cab l[...]

7 Step 2: Setting Up 1 T urning the power on Connect the power cord to the outlet ( ¼ ). Press z ON/ ST ANDBY on the main unit or z RECEIVER on the remote controller to turn the unit on or to standby mode. r When the unit is turned on, a large instantaneous current may flo w affecting functionality of the computer and other devices . It is reco[...]

8 Step 2: Setting Up Mov e the cursor with d / c buttons and set the distance from each speaker to the listening position. Press HOME to sav e the changed setting and close the menu screen. r This setting cannot be changed if headphones are connected or audio is output from the speakers of the TV . r The distance of speakers cannot be changed[...]

9 Step 3: Pla ying Bac k 1 Playing the pla yer and TV z T o control the unit : The remote controller ma y be in the remote mode that enables control of other de vices. In the state of remote mode, y ou will not be able to operate this unit. When you operate the unit, oper ate it from back to (a mode in which to operate this unit) RECEIVER mode by p[...]

10 Step 3: Pla ying Back Listening modes Select the desired mode by s witching and listening actual sound in different modes . The selectable listening modes depend on the format of the input signals. MO VIE/TV : Y ou can select a listening mode suitable for movies and TV programs. MUSIC : Y ou can select a listening mode suitable for m usic. GAME [...]

11 Step 3: Pla ying Back 3 Connecting and playing the Bluetooth- enabled device Y ou can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled de vice. The co verage area is |HGGV|OGVGTU r The Bluetooth-enabled de vice needs to suppor t the A2DP profile. r Note that connection is not alwa ys gu[...]

12 Step 3: Pla ying Back 5 Using Quick Setup men u In the Quick Setup menu, y ou can set frequently used functions including input selection and volume adjustment. 1. Press Q SETUP on the remote controller . The Quick Setup menu is displa yed on the connected TV's screen. Quick Setup Input Audio Information Listening Mode 2. Select the item wi[...]

13 Step 3: Pla ying Back 6 Using the multi-zone function Y ou can listen to the sound in a separate room by making the Zone connection (analog) between the unit and an integrated amplifier placed in the separate room. Y ou can use a Blu-ray Disc pla yer in the main room in which the unit is placed, while receiving AM/FM broadcast in the separate ro[...]

14 1 23 8 9 F G H J 4 K 56 7 I M L P R N O Q (European, Australian and Asian models) Front P anel 1 z ON/ST ANDBY button : T ur ns the unit on or into standby mode . 2 BLUET OOTH indicator : Flashes while pairing with a Bluetooth-enabled de vice is in progress and sta ys lit when pairing is completed. 3 ZONE 2 button : Controls the ZONE function. 4[...]

15 1 46 8 2 3 5 7 9F G H (T aiwanese models) Rear P anel 1 RI REMO TE CONTROL jack : An Onkyo product with RI jack can be connected and synchroniz ed with this unit. 2 (/#06'00#LCEMŝCPF#/#06'00# terminal : The supplied antennas are connected. 3 USB port : A USB stor age device is connected so that musi[...]

16 T r oubleshooting Before starting the procedure Problems ma y be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. T r y the simple measures on both the unit and the connected device . If the problem is that the video or audio is [...]

17 Specifications Amplifier Section Rated Output P ower All channels: 65 watts minimum continuous power per channel, |QJONQCFU|E JCPPGNUFTKXGPHTQO*VQM*YKVJC maximum total harmonic distortion of 0.7% (FTC) 90 watts minimum continuous po wer per channel, 6 ohm loads, |EJCPPGNUFTKXGP?[...]

18 License and T rademark Inf ormation Manufactured under license from Dolb y Laboratories. Dolby , Pro Logic and the double-D symbol are trademarks of Dolby Labor atories. For DTS patents , see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD , the Symbol, & DTS and the Symbol together are registered t[...]

19 Precautions For European Models Declaration of Conf ormity We declare , under our sole responsibility , that this product complies with the standards: – Safety – Limits and methods of measurement of radio disturbance characteristics – Limits for harmonic current emissions – Limitation of voltage changes, voltage fluctuations and flic ker[...]

* 2 9 4 0 1 7 9 3 * D1405-0 SN 29401793 (C) Copyright 2014 Onkyo Corporation Japan. All rights reser ved. Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAP AN http://www .onkyo .com/ 18 P ark W ay , Upper Saddle River , N.J. 07458, U.S .A. For Dealer , Ser vice, Order and all other Business Inquiries: T el: 201-785-2600 F ax: 201-78[...]