Opticon LMD 1135 manual

User’s Manual LMD 1135 Miniature High Speed Laser Fixed Position Scanner Manual No. 25-ULPNR102-01 March, 2005 (OSE Command Set) 8 Olympic Drive Orangeburg, NY 10962 Tel 845.365.0090 Fax 845.365.1251 www.OpticonUSA.com[...]

[...]

Contents Section 1 Introduction and Getting Started 1 Product Overview 1 Quick Start-Up Procedure 1 Section 2 Technical Specifications 3 Physical Specifications 3 Symbologies Supported 3 Optical Specification 3 P i t c h 4 S k e w 4 Tilt (rotation) 5 C u r v a t u r e 5 Electrical Specification 5 RS232 Communications Specifications 6 Connector Pin [...]

Organization of this Manual This manual provides the necessary instructions for installing and using the Opticon LMD 1135 Fixed Position Scanner. The manua l is organized as follows: Section 1 Introduction and Getting Started Describes the general operation of the LMD 1135 scanner. Also provides a Quick Start- Up Procedure that allows you to be gin[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 1 Section 1 Introduction and Getting Started Product Overview The LMD 1135 Fixed Position Scanner is a miniatur e, 100 scan per second, laser bar code reader designed to be easily incorporated into host equipmen t. The small physical size makes the scanner easy to integrat[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 2 ♦ In the Properties Settings dialog screen, Select Terminal keys for the Function, arrow and control key; then Select ANSI for Emulation; the Back scroll buffer line can remain at the default 500 ♦ Click on the ASCII Setup button. In the ASCII Setup Sending screen, s[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 3 Section 2 Technical Specifications Physical Specifications Case Material Plastic Dimensions 2.2 x 1.9 x 1.0 in (WxDxH) (55 x 47.5 x 25.5 mm) Weight 2.1 oz (60 grams ) w/o cable Cable Length 6.5 Feet (2000 mm) Connector 9-pin, DB9F-SC connector with power pigtail (evaluat[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 4 Pitch Specified operation ( α ) at + 50 degrees or less. (Recommended at + 13 degrees) Avoid specular reflection in the dead zone (+/- 8 degrees). Skew Specified operation ( α ) + 30 degrees or less. (Recommended 0 degrees)[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 5 Tilt (Rotation) Curvature Curvature Electrical Specifications Operating Voltage +5VDC + 10% Current Operating 85mA (typical), 150mA (max) Idle 55mA (typical), 70mA (max) Pwr-On Surge 650mA (typical), 1500mA (max) Specified operation ( θ ) + 20 degrees or less. (Barcode [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 6 RS232 Communications Specifications RS232 Data Transmission Format Parameter Default Optional Settings Timing Asynchronous No. of Start Bits 1 bit No. of Stop Bits 1 bit 1 or 2 bits No of Data Bits 8 bit 7 or 8 bits Parity None Odd / Even / None Baud Rate 9600 baud 150 t[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 7 Scanner/cable snap-in connector pin-out (connector: 3004CA8101 Kinsun) Pin No. Signal 1 RTS 2 CTS 3 TxD 4 RxD 5 VCC 6 Ground 7 NC 8 NC 9 NC 10 NC Environmental Specifications Temperature Operating +23 to +113 ° F (-5 ° to +45 ° C ) Storage -4 to +140 ° F (-20 ° to +[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 8 Section 3 Positioning the Scanner for Optimum Performance Achieving Optimum Performance Three items greatly impact performance: 1) Distance (from the scan window) to the bar code 2) Specular Reflection 3) Quality of Bar Code Labels 1) Distance to the Bar Code The ideal l[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 9 Readable Bar Code Width LMD 1135 (Field-of-View Specification Based Upon 40 Degree Sweep) Distance from Window Max. Width 2.0” 2.8” 4.0” 4.2” 8.0” 7.2” 12.0” 10” The table above shows the field-of-view at various distances from the window. The field-of-vi[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 10 3) Quality Bar Code Labels The quality of the bar code label can affect the sca nning performance. Poor quality labels are more difficult to decode and may result in non-reads or po tential misreads. The bar code label should be printed to specifications. This means tha[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 11 Application Notes Tips for Achieving High Throughput In some applications your primary objective may be to achieve the highest possible throughput rate. The following list identifies the parameters and scanner settings that can maximize scanning and decode throughput sp[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 12 Tips for Verifying the Presence of a Bar Code If the scanner is operated in the “trigger enabled” mode and the trigger is activated, one of three conditions may occur: A bar code is scanned and decoded. Decoded data is transmitted A bar code is scanned but is not de[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 13 Section 4 Configuring the Scanner Since the operation of the LMD 1135 scanners are micr oprocessor controlled, it is possible to modify or program its operation to match your specific app lication. Changes in parameter settings can be accomplished two ways. 1. The scann[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 14 Section 5 Application Engineering Support Technical Assistance and Support Opticon is eager to help you integrate the LMD 1135 sca nner into your application. Our technical support staff is available to answer any questions or work with you to adapt the scanner to your [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 15 Section 6 Scanner Labeling IEC 825-1 Class 1 Laser Device The LMD 1135 has been examined and found to be a Class 1 Laser Device according to the relevant requirements of IEC 825-1 and corresponding EN 60825-1 (1993-11) including amendment 1 (1997-09) and amendment 2 (20[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 16 Appendices Appendix A How to Program the Scanner Appendix B Computer Programming Commands Appendix C Bar Code Programming Commands Appendix D Dimensional Drawing Appendix E Optical Performance (typical)[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 17 Appendix A Programming the Scanner Two different methods can be used to prog ram parameters to configure the scanner: a. Programming via Computer Commands b. Programming via special Bar Codes from a menu page Most parameters can be programmed using either of these two m[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 18 When the scanner is in the Programming Mode, you can change more than one parameter at a time. However, this may become confusin g. Until you become proficient at programming you may prefer to change only a few parameters at one time. We reco mmend that you keep a recor[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 19 Appendix B Computer Programming Commands All commands must be preceded by an 'ESC' charac ter (ZZ) and be followed by a 'Carriage Return' character (1C). Shaded areas indicate factory default settings. Enable Disable Global Defaults U2 Enable Factory[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 20 Enable Disable Options for Code 39 8E Enable 1 character read 8D Enable 3 character read C0 C1 Enable Check Digit calculation D9 D8* Transmit Check Digit D0 D1 Transmit start/stop characters (*…..*) +L +M Concatenation -Y -Z Alternative algorithm *Only disable if C0 e[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 21 Prefix Suffix Select Symbology for Prefix/Suffix RY RZ All codes N1 N6 UPC-A M0 O0 UPC-A +2 or +5 N2 N7 UPC-E M1 O1 UPC-E +2 or +5 N3 N8 EAN13 M2 O2 EAN-13 +2 or +5 N4 N9 EAN-8 M3 O3 EAN-8 +2or +5 M4 O4 Code 39 M5 O5 Codabar (NW-7) M6 O6 Industrial 2 of 5 M7 O7 Interlea[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 22 Handshaking I0 Unlimited wait for CTS from terminal I1 100 mS wait for CTS from terminal I2 200 ms wait for CTS from terminal I3 400 mS wait for CTS from terminal P0 No Handshaking P1 Busy/Ready P2 Modem P3 ACK/NAK (1 second timeout with error buzzer) P4 ACK/NAK no resp[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 23 Scanner Timeout (Trigger Enabled Mode) Y1 1 second after triggering Y2 2 second after triggering Y3 3 second after triggering Y4 4 second after triggering Y5 5 seconds after triggering Y6 6 second after triggering Y7 7 seconds after triggering Y8 8 seconds after trigger[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 24 Appendix C: Bar Code Programming Menus & Commands - Index 1. Global Default & Sc anner Config uratio ns....................................... 25 2. Symbology Selectio n ................................................................... 26 3. Add/Activate Speci[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 25 1. Global Default & Scanner Configurations Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   U2 Return all parameters to Default settings V3  %  Z1 Transmit software version [2   Z2 Save all values set by [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 26 2. Symbology Selection Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   A0 Enable all bar code symbologies B1   J0 Enable all UPC and EAN K1   A2 Only Code-39 B3   A3 Only Codabar (NW-7) B!   A4 O[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 27 2. Symbology Selection (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   J4 Only EAN (13/8) K5   J5 Only EAN (13/8) +2 K6   J6 Only EAN (13/8) +5 K7   J7 Only Industrial 2 of 5 K8   J8 [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 28 3. Add/Activate Specific Bar Code Symbologies Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   B2 Enable Code 39 C3  %  B3 Enable Codabar (NW-7) C!  %  B4 Enable IATA C5  %  B5 Enable Code 93 C6  % ?[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 29 3. Add/Activate Specific Bar Code Symbologies (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   R6 Enable EAN (13/8) +5 S7  %  R7 Enable Industrial 2 of 5 S8  %  R8 Enable Interleaved 2 of 5 S9 [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 30 5. Options for UPC Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   E2 UPC-A (13 Digits) Add leading zero; Transmit check digit (Translates UPC-A to EAN-13) F3   E3 UPC-A (12 Digits) Do not add leading zero; Transm[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 31 6. Options for EAN-8 & EAN-13 Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   6J EAN-13 Disable transmit CD 7K   6K EAN-13 Enable transmit CD 7L  %  6H EAN-8 Disable transmit CD 7I   6I EAN-8 Enabl[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 32 7. Options for Code 39 & IT Pharmaceutical Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   8E Enable 1 character (3 characters including start/stop characters) 9F  %  8D Enable 3 characters 9E   C1 Disab[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 33 7. Options for Code 39 & IT Pharmaceutical (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   D6 IT Pharmaceutical only E7   DB IT Pharmaceutical, enable transmit of leading A EC   DA IT Pharmac[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 34 8. Options for Codabar (NW-7) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   H4 Enable ABC code only I5   HA Enable Codabar only IB  %  H3 Enable Codabar and ABC code I!   HC Enable 1 character (3 cha[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 35 8. Options for Codabar (NW-7) (Continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   H7 Do not calculate check digit I8 %  H6 Calculate check digit I7  HI Inter-character Gap Check – No check IJ  HH Inte[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 36 9. Options for Interleaved & Industrial 2 of 5 Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   G0 Do not calculate check digit H1  %  G1 Calculate check digit H2   E0 Transmit Check digit F1  %  E1[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 37 10. Options for IATA Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   4H Do not calculate check digit 5I  %  4J Calculate check digit (CPN + Form + Serial) 5K   4I Calculate check digit (Form + Serial) 5J [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 38 11. Options for Code-128 / EAN-128 Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   OF Disable EAN-128 only PG  %  JF Enable EAN-128 only KG   MP Disable concatenation NQ  %  MO Enable concatenation NP [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 39 13. Fixing the Number of Digits Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   H0 Disable fixed length all symbologies I1  %  H1 Enable fixed length all symbologies I2   HK Enable fixed length for selected [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 40 For example, if a Code 39 label of length 2 characters were scanned in Step 3 then only Code 39 labels would be checked for a minimum length of 2 characte rs. If a second label had been read in Step 3 (immediately following the first), then that partic ular symbology co[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 41 15. Setting Prefixes (Identifying the Symbology) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   RY All codes SZ   N1 UPC-A O2   M0 UPC-A +2 or +5 N1   N2 UPC-E O3   M1 UPC-E +2 or +5 N2   [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 42 15. Setting Prefixes (Identifying the Symbology) (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   M7 Interleaved 2 of 5 N8   M8 Code 93 N9   M9 Code 128 N:   I8 IATA J9   N0 MSI/Plesse[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 43 16. Setting Suffixes (Identifying the Symbology) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   RZ All Codes S[   N6 UPC-A O7   O0 UPC-A +2 or +5 P1   N7 UPC-E O8   O1 UPC-E +2 or +5 P2   [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 44 16. Setting Suffixes (Identifying the Symbology) (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   O7 Interleaved 2 of 5 P8   O8 Code 93 P9   O9 Code 128 P:   I9 IATA J:   N5 MSI/Plesse[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 45 17. Direct Input of Numeric Characters Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[  Q0 0 R1  Q1 1 R2  Q2 2 R3  Q3 3 R!  Q4 4 R5  Q5 5 R6  Q6 6 R7  Q7 7 R8  Q8 8 R9  Q9 9 R: [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 46 18. Direct Input of Alpha Characters (ZZ) START/END Program Menu [[  0N N 1O  0A A 1B  0O O 1P  0B B 1C  0P P 1Q  0C C 1D  0Q Q 1R  0D D 1E  0R R 1S  0E E 1F  0S S 1T  0F F 1G  0T T 1U  0G G 1H  0U U 1V  0H H 1I  0V V 1[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 47 19. Direct Input of Alpha Characters (Lower Case) (ZZ) START/END Program Menu [[  $N n %O  $A a %B  $O o %P  $B b %C  $P p %Q  $C c %D  $Q q %R  $D d %E  $R r %S  $E e %F  $S s %T  $F f %G  $T t %U  $G g %H  $U u %V  $H h [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 48 20. Direct Input of Control Characters (ZZ) START/END Program Menu [[  1M ^M (CR) 2N  9G ^@ (null) :H  1N ^N (SO) 2O  1A ^A (SCH) 2B  1O ^O (SI) 2P  1B ^B (STX) 2C  1P ^P (DLE) 2Q  1C ^C (ETX) 2D  1Q ^Q (DC1) 2R  1D ^D (EOT) 2E  1R ^R (D[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 49 20. Direct Input of Control Characters (Continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[  1Z ^Z (SUB) 2[  9A ^[ (ESC) :B  9B ^ (FS) :C  9C ^] (GS) :D  9D ^^ (RS) :E  9E ^_ (US) :F  9F DEL (ASCII [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 50 21. Direct Input Characters Misc. (ZZ) START/END Program Menu [[  5N - 6O  5A <SPACE) 6B  5O . 6P  5B ! 2B  5P / 6Q  5C “ 6D  6A : 7B  5D # 6E  6B ; 7C  5E $ 6F  6C < 7D  5F % 6G  6D = 7E  5G & 6H  6E > 7F  [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 51 21. Direct Input Characters Misc. (Continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[  7D ^ 8E  7E _ 8F  7F ‘ 8G  9T { :U  9U | :V  9V } :W  9W ~ :X [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 52 22. Code Identification & Cha racters/Digits Transmitted This feature instructs the scanner to use pre-existing code identifiers and/or to calculate/transmit a number indicating the total number of characters th at are being transmitted to the host for specific symb[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 53 The Opticon Code Identifiers are the following: UPC-A C EAN-13 B Code 39 V UPC-A +2 F EAN-13 + 2 L Code 39 (Full ASCII) W UPC-A +5 G EAN-13 +5 M Italian Pharmaceutical Y UPC-E D EAN-8 A Codabar R UPC-E +2 H EAN-8 +2 J Codabar ABC S UPC-E +5 I EAN-8 +5 K Industrial 2 of [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 54 23. Communication Parameters (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   K7 19,200 Baud L8   L0 7 Data Bits M1   L1 8 Data bits M2  %  L2 Parity = None M3  %  L3 Parity = Even M! [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 55 24. Handshaking Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   I0 Unlimited wait for CTS from terminal J1  %  I1 100 mS wait for CTS from terminal J2   I2 200 mS wait for CTS from terminal J3   I3 400[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 56 24. Handshaking (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   KC 50 ms intercharacter delay LD   KD 100 ms intercharacter delay LE  [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 57 25. Buzzer Operation Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   T0 Volume = Maximum U1  %  T1 Volume = Upper Mid-range U2   T2 Volume = Lower Mid-range U3   T3 Volume = Minimum U!   W0 Disab[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 58 26. Positive & Negative Bar Codes Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   V2 Positive bar code only (black bars/white spaces) W3  %  V3 Negative bar codes W!  V4 Both positive & negative bar cod[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 59 28. Selecting the Read Mode Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   S0 Single Read Mode (Trigger enabled mode only) T1   S1 Multiple Read Mode T2  %  S2 Continuous Read Mode T3   The operation [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 60 29. Parallel Read Mode Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   +6 2 Parallel labels only ,7   +7 3 Parallel labels only ,8   +8 4 Parallel labels only ,9   30. Add-on Wait Mode (Applies to UPC/[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 61 31. Scanner Timeout (Trigger Enabled Mode only) These commands, which are only applicable in the Tr igger Enabled mode, establish the time-out period after the trigger pulse is received. In Single Read Mode, the time out is terminated upon a good read. In Multiple Read [...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 62 32. Multiple Read Reset Time This option is used in conjunction with the multiple read mode. The selected time sets the period the scanners should be pointed away from a label before that same label can be decoded again. Indefinitely means that the next bar code must al[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 63 33. Quiet Zone Options With this option the scanner can decode bar codes that have smaller quiet zone margins than specified for the symbology. Be careful when using this option as its use may increase the possibility of partial and ghost reads. Do not use smaller margi[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 64 34. Redundant Decoding The Number of Redundant Decodes determines how many times the scanner must decode a bar code and obtain the same value before it will transmit the data. For example, if the redundancy is set at three times, the scanner will not transmit data until[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 65 35. Transmitting Error Indications (Trigger Enabled only) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   TH Error message no label UI   TI Error message no decode UJ   TG Clear error messages for no label a[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 66 36. Good Read LED Operation Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[   T4 Good read LED disabled after decode U5   T5 Good read LED ON after decode for .20 seconds U6  %  T6 Good read LED ON after decod[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 67 Appendix D: Dimensional Drawing (All dimensions in millimeters)[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 68 Appendix E: LMD 1135 – Optical Performance (typical unit) Depth of Field, PCS = .9 0123456 789 1 0 1 1 1 2 1 3 20.0 mil 15.0 mil 10.0 mil 6.0 mil 5.0 mil Resolution Distance from Unit (in ches)[...]

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner Page 69 Notes[...]