Opticon NFT 2100 manual

NFT 2100 Miniature High Speed CCD Fixed Position Barcode Scanner User’s Guide Manual No. 25-ULNFT2100-01[...]

Contents Section 1 Introduction and Getting Started 1 Product Overview 1 Quick Start-Up Procedure 1 Section 2 Technical Specifications 3 Physical Specifications 3 Symbologies Supported 3 Optical Specification 3 P i t c h 4 S k e w 4 Tilt (rotation) 5 C u r v a t u r e 5 Electrical Specification 6 RS232 Communications Specifications 6 Connector Pin [...]

Organization of this Manual This manual provides the necessary instructions for installing and using the Opticon NFT 2100 Fixed Position Scanner. The manua l is organized as follows: Section 1 Introduction and Getting Started Describes the general operation of the NFT 2100 scanner. Also provides a Quick Start- Up Procedure that allows you to be gin[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 1 Section 1 Introduction and Getting Started Product Overview The NFT 2100 Fixed Position Scanner is a miniature, 200 scan per second, CCD barcode reader designed to be easily incorporated into host equipment. The small physical size makes the scanner easy to integr[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 2 ♦ Click on the ASCII Setup button. In the ASCII Setup Sending screen, select Line ends with line feeds and Echo typed locally so that any keyboard commands you input will appear on your screen. In the ASCII Setup Receiving screen, select Append line feeds to inc[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 3 Section 2 Technical Specifications Physical Specifications Case Material Steel (Black) Dimensions 2.16 x 1.85 x 0.78 in (WxDxH) (55 x 47 x 20 mm) Weight 3.5 oz (100 grams) without cable Cable Length 6.5 Feet (2000 mm) Connector 9-pin, DB9F-SC connector with power [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 4 ±10º ±30º Av iod th is r eg ion 1 4 . 5 1 4 . 5 α α β ±6º Skew Specified operation ( α ) at + 30º or less. (Recommended at + or - 13º) Avoid specular reflection in the dead zone (±10º). Pitch Specified operation ( β ) at + 6º or less. (Recommended [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 5 35.4 R ±10º φ 1 4 .5 Tilt (Rotation) Specified operation ( θ ) ±10º or less. (Barcode aspect ratio must allow the field of view to cover all bars). (Recommended operation at 0º) Curvature EAN-8 / UPC-E: R = >20 mm (0.8”) or EAN-13 / UPC-A: R => 30 m[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 6 Electrical Specifications Operating Voltage +5VDC + 5% Current Operating (LEDs are ON) 130mA (max) Idle (LEDs are OFF) 45mA (max) Pwr-On Surge 1000mA (max) RS232 Communications Specifications RS232 Data Transmission Format Parameter Default Optional Settings Timin[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 7 Connector Pin-outs 9 Pin D-Sub Female Connector (with power stereo jack) Pin No. Signal Direction Power Plug/Jack Signal 1 Frame Ground Tip NC 2 TxD Output Center +5V 3 RxD Input Rear Signal Ground 4 NC 5 Signal Ground Pwr Return 6 NC 7 CTS Input 8 RTS Output 9 NC[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 8 Section 3 Positioning the Scanner for Optimum Performance Achieving Optimum Performance Four items greatly impact performance: 1) Distance (from the scan window) to the bar code 2) Field of View 3) Specular Reflection 4) Quality of Bar Code Labels 1) Distance to t[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 9 ±10º ±30º Av iod th is re gio n 1 4. 5 1 4 . 5 α α Readable Width or Field of View for the NFT 2100 (Field-of-View Specification Based Upon 69º Degree Sweep) 1.0" Focal Distance 1.4" 1.5 2.0" 2.5" Distance from Front of Case 25.4mm 35.4m[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 10 Measuring Scanner Performance A method for properly positioning the unit is to program the scanner for Trigger Disable (S7) and Continuous Read (S2) modes. The scanner will now be always on and will continuously read the same bar code. Since the buzzer sounds eac[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 11 Tips for Verifying the Presence of a Bar Code If the scanner is operated in the “trigger enabled” mode and the trigger is activated, one of three conditions may occur: A bar code is scanned and decoded. Decoded data is transmitted A bar code is scanned but is[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 12 Section 4 Configuring the Scanner Since the operation of the NFT 2100 scanners are microp rocessor controlled, it is possible to modify or program its operation to match your specific app lication. Changes in parameter settings can be accomplished two ways. 1. Th[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 13 Section 5 Application Engineering Support Technical Assistance and Support Opticon is eager to help you integrate the NFT 2100 scanner into your application. Our technical support staff is available to answer any questions or work with you to adapt the scanner to[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 14 OPTICON NFT-2100-I -RS232 C xxxxx x MADE IN JAPAN ****** Section 6 Scanner Labeling IEC 825-1 Class 1 LED Devices The NFT 2100 has been examined and found to be a CE Class 1 LED Device according to the relevant requirements of IEC 825-1 and corresponding EN 60825[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 15 Appendices Appendix A How to Program the Scanner Appendix B Comput er Programming Commands Appendix C Bar Co de Programming Commands Appendix D Dimensional Drawing Appendix E Optical Performance (typical)[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 16 Appendix A Programming the Scanner Two different methods can be used to prog ram parameters to configure the scanner: a. Programming via Computer Commands b. Programming via special Bar Codes from a menu page Most parameters can be programmed using either of thes[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 17 When the scanner is in the Programming Mode, you can change more than one parameter at a time. However, this may become confusin g. Until you become proficient at programming you may prefer to change only a few parameters at one time. We recommend that you keep a[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 18 Appendix B Computer Programming Commands All commands listed below must be preceded by an 'E SC' (x1B) or 'STX' (x02) character and be followed by a 'Carriage Return' (x0D) or 'ETX' (x03) character. Shaded areas indicate fa[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 19 5, IATA, & Codabar -Z Alternate decode algorithm no.1 for Code 39 Enable Disable Options for Code 39 (cont.) .S Alternate decode algorithm no.2 for Code 39 Enable Disable Options for IT Pharmaceutical D6 D5 IT Pharmaceutical only D7 D5 IT Pharmaceutical if po[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 20 Prefix Suffix Select Symbology for prefix/Suffix M5 O5 Codabar (NW-7) M6 O6 Industrial 2 of 5 Prefix Suffix Select Symbology for prefix/Suffix (cont.) M7 O7 Interleaved 2 of 5 M8 O8 Code 93 M9 O9 Code 128 I8 I9 IATA N0 N5 MSI/Plessey MB OB SCode L8 L9 Telepen MZ [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 21 Communication Handshaking P1 Busy/Ready P2 Modem P3 ACK/NAK (1 sec tim eout with error buzzer) P4 ACK/NAK no response (100 ms timeout, terminates with good read buzzer) ZG XON/OFF Communication Delays KA No intercharacter delay KB 20 ms intercharacter delay KC 50[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 22 YO Margin check 1/7 nominal YP Margin check 2/7 nominal YQ Margin check 3/7 nominal YR Margin check 4/7 nominal YS Margin check 5/7 nominal YT Margin check 6/7 nominal YU Margin check normal Redundant Decoding X2 Read bar code 3 times before transmitting X3 Read [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 23 Appendix C: Bar Code Programming Menus & Commands - Index 1. Global Default & Sc anner Config uratio ns....................................... 24 2. Symbology Selectio n .............................................................. 25-26 3. Add/Activate [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 24 1. Global Default & Scanner Configurations Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ U2 Return all parameters to Default settings V3 % Z1 Transmit software version [2 Z2* Save all values set by com port command[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 25 2. Symbology Selection Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ A0 Enable all bar code symbologies B1 J0 Enable all UPC and EAN K1 A2 Only Code-39 B3 A3 Only Codabar (NW-7) B! A4 Only IATA B5 A5 Only Code-93 B6 A6[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 26 2. Symbology Selection (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ J4 Only EAN (13/8) K5 J5 Only EAN (13/8) +2 K6 J6 Only EAN (13/8) +5 K7 J7 Only Industrial 2 of 5 K8 J8 Only Interleaved 2 of 5 K9 JD Tri[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 27 3. Add/Activate Specific Bar Code Symbologies Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ B2 Enable Code 39 C3 % B3 Enable Codabar (NW-7) C! % B4 Enable IATA C5 % B5 Enable Code 93 C6 % B6 Enable Code 128 C7 % B7 Ena[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 28 3. Add/Activate Specific Bar Code Symbologies (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ R6 Enable EAN (13/8) +5 S7 R7 Enable Industrial 2 of 5 S8 % R8 Enable Interleaved 2 of 5 S9 % JZ TriOptic K[ % R9 [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 29 5. Options for UPC Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ E2 Translate UPC-A to EAN-13 (13 Digits) Add leading zero & Transmit check digit F3 E3 UPC-A (12 Digits) Do not add leading zero; Transmit check digi[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 30 6. Options for EAN-8 & EAN-13 Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ 6J EAN-13 Do not transmit CD 7K 6K EAN-13 Transmit CD 7L % 6H EAN-8 Do not transmit CD 7I 6I EAN-8 Transmit CD 7J % IB Disable ISBN transl[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 31 7. Options for Code 39 and IT Pharmaceutical Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ 8E Enable 1 character (3 characters including start/stop characters) 9F % 8D Enable 3 characters 9E C1 Disable check digit calc[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 32 7. Options for Code 39 and IT Pharmaceutical (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ D5 Disable IT Pharmaceutical & enable code 39 E6 % D6 Enable IT Pharmaceutical & disable code 39 E7 D7 Enab[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 33 8. Options for Codabar (NW-7) (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ F4 Transmit start/stop characters as abcd/abcd G5 HJ T ransmit start/stop as DC1, DC2, DC3, DC4 IK H8 Transmit check digit I9 % H9[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 34 Codabar (NW-7) Format Start Character 1 to 42 data digits Check digit Stop Character A . . . . . . . . T a . . . . . . . . t A . . . . . . . . A a . . . . . . . . a • Codabar (NW-7) has four different start/stop character schemes as shown above. The check dig i[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 35 9. Options for Interleaved & Industrial 2 of 5 Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ G0 Do not calculate check digit H1 % G1 Calculate check digit H2 E0 Do not transmit Check digit F1 E1 Transmit check digi[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 36 10. Options for IATA Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ 4H Do not calculate check digit 5I % 4J Calculate check digit (CPN + Form + Serial) 5K 4I Calculate check digit (Form + Serial) 5J 4K Calculate check d[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 37 11. Options for Code-128 / EAN-128 Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ OF Disable EAN-128 only PG % JF Enable EAN-128 only KG MP Disable concatenation NQ % MO Enable concatenation NP 12. Options for Code-93 C[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 38 13. Setting the Character length that is allowed to be read. Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ H0 Disable length setting on all symbologies I1 % H1 Enable length setting on all symbologies I2 HK Enable leng[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 39 For example, if a Code 39 label containing 2 characters were scanned in Step 3 then only Code 39 labels would be checked for a minimum length of 2 characte rs. If a second label had been read in Step 3 (immediately following the first), then that particular symbo[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 40 Example : To add the alpha character “A” as a Prefix and “B” as a Suffix to UPC-A bar code data: 7. Scan “START/END Programming Mode” 8. Scan N1, representing a Prefix for UPC-A 9. Scan 0A, representing the alpha character “A” 10. Scan N6, represe[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 41 15. Setting Prefixes (Identifying the Symbology) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ RY All codes SZ N1 UPC-A O2 M0 UPC-A +2 or +5 N1 N2 UPC-E O3 M1 UPC-E +2 or +5 N2 N3 EAN-13 O! M2 EAN –13 +2 or +5 N3 N4 [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 42 15. Setting Prefixes (Identifying the Symbology) (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ M7 Interleaved 2 of 5 N8 M8 Code 93 N9 M9 Code 128 N: I8 IATA J9 N0 MSI/Plessey O1 MB SCode NC L8 Telepen M9 MZ[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 43 16. Setting Suffixes (Identifying the Symbology) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ RZ All Codes S[ N6 UPC-A O7 O0 UPC-A +2 or +5 P1 N7 UPC-E O8 O1 UPC-E +2 or +5 P2 N8 EAN-13 O9 O2 EAN–13 +2 or +5 P3 N9 E[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 44 16. Setting Suffixes (Identifying the Symbology) (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ O7 Interleaved 2 of 5 P8 O8 Code 93 P9 O9 Code 128 P: I9 IATA J: N5 MSI/Plessey O6 OB SCode PC L9 Telepen M: PS[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 45 17. Direct Input of Numeric Characters Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ Q0 0 R1 Q1 1 R2 Q2 2 R3 Q3 3 R! Q4 4 R5 Q5 5 R6 Q6 6 R7 Q7 7 R8 Q8 8 R9 Q9 9 R:[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 46 18. Direct Input of Alpha Characters (ZZ) START/END Program Menu [[ 0N N 1O 0A A 1B 0O O 1P 0B B 1C 0P P 1Q 0C C 1D 0Q Q 1R 0D D 1E 0R R 1S 0E E 1F 0S S 1T 0F F 1G 0T T 1U 0G G 1H 0U U 1V 0H H 1I 0V V 1W 0I I 1J 0W W 1X 0J J 1K 0X X 1Y 0K K 1L 0Y Y 1Z 0L L 1M 0Z [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 47 19. Direct Input of Alpha Characters (Lower Case) (ZZ) START/END Program Menu [[ $N n %O $A a %B $O o %P $B b %C $P p %Q $C c %D $Q q %R $D d %E $R r %S $E e %F $S s %T $F f %G $T t %U $G g %H $U u %V $H h %I $V v %W $I i %J $W w %X $J j %K $X x %Y $K k %L $Y y %[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 48 20. Direct Input of Control Characters (ZZ) START/END Program Menu [[ 1M ^M (CR) 2N 9G ^@ (null) :H 1N ^N (SO) 2O 1A ^A (SCH) 2B 1O ^O (SI) 2P 1B ^B (STX) 2C 1P ^P (DLE) 2Q 1C ^C (ETX) 2D 1Q ^Q (DC1) 2R 1D ^D (EOT) 2E 1R ^R (DC2) 2S 1E ^E (ENQ ) 2F 1S ^S (DC3) 2T[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 49 20. Direct Input of Control Characters (Continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ 1Z ^Z (SUB) 2[ 9A ^[ (ESC) :B 9B ^ (FS) :C 9C ^] (GS) :D 9D ^^ (RS) :E 9E ^_ (US) :F 9F DEL (ASCII 127) :G[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 50 21. Direct Input Characters Misc. (ZZ) START/END Program Menu [[ 5N - 6O 5A (SPACE) 6B 5O . 6P 5B ! 6C 5P / 6Q 5C “ 6D 6A : 7B 5D # 6E 6B ; 7C 5E $ 6F 6C < 7D 5F % 6G 6D = 7E 5G & 6H 6E > 7F 5H ` 6I 6F ? 7G 5I ( 6J 6G @ 7H 5J ) 6K 7A [ 8B 5K * 6L 7B [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 51 21. Direct Input Characters Misc. (Continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ 7D ^ 8E 7E _ 8F 7F ‘ 8G 9T { :U 9U | :V 9V } :W 9W ~ :X[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 52 22. Communication Parameters Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ K0 150 baud L1 K1 300 Baud L2 K2 600 Baud L3 K3 1,200 Baud L! K4 2,400 Baud L5 K5 4,800 Baud L6 K6 9,600 Baud L7 % K7 19,200 Baud L8 L0 7 Data [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 53 22. Communication Parameters. (Continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ L5 1 Stop Bit M6 % L6 2 Stop Bits M7 23 Communication Handshaking. Computer Command Function /Description Bar Code Command (ZZ) ST[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 54 23. Communication Delays P4 ACK/NAK no response (100 ms timeout, terminates with good read buzzer) Q5 KA No intercharacter delay LB % KB 20 ms intercharacter delay LC KC 50 ms intercharacter delay LD KD 100 ms intercharacter delay LE[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 55 24. Buzzer Operation Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ T0 Volume = Maximum U1 % T1 Volume = Upper Mid-range U2 T2 Volume = Lower Mid-range U3 T3 Volume = Minimum U! W0 Disable buzzer X1 W8 Enable buzzer X9 [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 56 25. Setting the Trigger Functions Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ S7 Disable the trigger function /LEDs are ON continuously T8 % S8 Enable the trigger function /LEDs are OFF until trigger is activated or [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 57 Mode Trigger Function Enabled (S8) Trigger Function Disabled (S7) After receiving a trigger pulse, scanner will read multiple, different bar codes in succession until it times out. (Each read will reset the scanner’s time out) Scanner will read different bar co[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 58 27. Add-on Wait Mode (Applies to UPC/EAN only) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ XA Disable Add-on wait mode YB XB Enable Add-on wait mode of 0.25 seconds YC XC Enable Add-on wait mode of 0.50 seconds YD % [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 59 28. Scanner Timeout (Trigger Enabled Mode only) These commands, which are only applicable in the Tr igger Enabled mode, establish the time-out period after the trigger pulse is received. In Single Read Mode, the time out is termin ated upon a good read. In Multip[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 60 29. Multiple Read Reset Time This option is used in conjunction with the multiple read mode. The selected time sets the period the scanners should be pointed away from a label before that same label can be decoded again. Indefinitely means that the next bar code [...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 61 30. Quiet Zone Options With this option the scanner can decode bar codes th at have smaller quiet zone margins than specified for the symbology. Be careful when using this option as its use may increase the possibility of partial and ghost reads. Do not use small[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 62 31. Redundant Decoding The Number of Redundant Decodes determines how many times the scanner must decode a bar code and obtain the same value before it will transmit the da ta. For example, if the redundancy is set at three times, the scanner will not transmit da[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 63 33. No read error messages. The scanner can be programmed to transmit an error message when no barcode is read. The unit must be in trigger mode, then, the error message will be sent at the end of a trigger time out. 2 types of messages can be sent. The first typ[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 64 Appendix D: Dimensional Drawing (All dimensions in millimeters [inches])[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 65 Appendix E: NFT 2100 – Optical Performance NFT 2100 Depth of Field Table (Grade A Labels) Density Min. Distance (inches) Max Distance (inches) Range (inches) 6 mil 0.9 1.6 0.7 10 mil 0.8 1.7 0.9 20 mil 0.8 2.0 1.2 40 mil 0.9 2.4 1.5 NFT 2100 Depth of Field Char[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 66 Appendix F: Placement Drawing (All dimensions in millimeters [inches]) This Drawing shows one possible placement of the scanner relative to the target label. Other orientations are possible depending on barcode density and barcode length. Please use the optical i[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 67 Appendix G: Placement Drawing for test tubes (All dimensions in millimeters [inches]) This Drawing shows one possible placement of the scanner relative to the target label. Other orientations are possible depending on barcode density and barcode length. Please us[...]

Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 68 Notes[...]