Palsonic 5110PF manual

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 51CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 5110PF OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15899 PU[...]

Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ f[...]

INTRODUCTION Features Hyperband English/Chinese on-screen menu display 100 preset channels Auto-search, manual search Intellectualized I C-bus control Sleep timer, Auto Power-Off & blue background display Four picture mode setting AUDIO/VIDEO input & output terminals S-VIDEO terminal Advanced picture improvement circuit 1. Built-in digital [...]

NOTES FOR OPERATION Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. Please follow[...]

Effective range of the remote control operation Antenna Connection (1) Remove the back battery cover. Installation To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial[...]

Front view Back View Appearance Note: Functions of MENU, TV/AV, VOL , CH are also provided to the remote controller. 4 POWER SWITCH TV/AV MENU VOLUME DOWN CHANNEL UP CHANNEL DOWN VOLUME UP (2) Video 2 input terminals {VIDEO, AUDIO L/MONO, R} Antenna input MONITOR output terminals {VIDEO, AUDIO L/MONO, R} S-VIDEO (1) Video input terminals {VIDEO, AU[...]

Remote Controller Appearance 5[...]

If no picture appears on the screen, press the button or any one of 0~9 number buttons on the remote controller to turn the set on. Without using the remote controller, you can directly press VOL or CH or TV/AV button on the set to turn on the TV. To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. . Turning the P[...]

. OPERATION Tuning in There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. Use the AUTO SEARCH function to preset all the active channels in your local area automatically. To enter into menu Press the MENU button repeated[...]

. . OPERATION Tuning in (continued) Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO- SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions. Manual search If AUTO SEARCH [...]

OPERATION To skip a position number After presetting the channels, you can skip unnecessary position numbers so that only the channels you want to watch are selected. 1. Enter into the POS. MEMORY menu, select and highlight POSITION , then select the unwanted program number with the or button. 2. Press the or button to move the cursor to "SKIP[...]

358NTSC The setting of colour and sound system Tuning in (continued) Press the SYS button, the colour and sound system will be displayed on the screen. If the colour is abnormal, press the or button to select COLOR, then press the or button to select the proper colour system. Every time you press the or button, the colour system will change in the [...]

OPERATION Channel selection l You can watch TV programmes being broadcast on the preset channels. You can select your desired TV program by one of the following methods. Using the direct select buttons To select a one-digit position number, press the -/-- button to display "-" and 0~9 to select a number (0~9). To select a two-digit positi[...]

PICTURE COLOR 50 BRIGHT 50 CONT 100 SHARP 50 BB ON SELECT ADJUST sharper softer *TINT Selectable picture OPERATION Convenient Picture Controls Item To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. Press the P.S button to select the desired picture quality. MEMORY1 MEMORY2 MEMORY[...]

!!!!!!!..... Adjusting the volume and muting the sound OPERATION Convenient Sound Controls To adjust the sound volume Adjust the sound volume with the VOL buttons. Press the VOL button to decrease the sound. Press the VOL button to increase the sound. To mute the sound The muting function is convenient when you need to pay attention to surrounding [...]

1. Press the MENU button repeatedly until the OTHER SLEEP:30MIN. Sleep timer and to select the language for the OSD OPERATION Other functions Making use of the Sleep timer function allows you to have the set automatically turned off after a preset time. Press the SLP button every time, the time displaying on the screen will change in the sequence b[...]

To connect AV input terminal CONNECTING OTHER EQUIPMENT External Equipment Connections The following describes how to use and connect the TV with other AV equipment. Refer to the owner’s manual of the equipment to be connected as well. You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture an[...]

To connect MONITOR output terminal To connect AV input terminal (continued) CONNECTING OTHER EQUIPMENT To select the video input, press TV/AV the button on the TV set or AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until it displays progr[...]

. . . . . . . . . . . . OTHERS Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Spots appear on the screen Stripes appear on the screen Double images or "ghosts" Snowy picture The remote controller does not work TV cabinet creaks Specificatio[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-21F83-00[...]