Palsonic 5179G manual

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 51CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 5179G OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 4164 Standards Australia APP No: N15957[...]

Sleep timer...................................................16 Playing Games.............................................15 SYSTEM setting.........................................14 CLOCK setting...........................................13 Convenient Picture and Sound Control....12 Channel selection.........................................11 AFT[...]

English/Chinese on-screen menu display INTRODUCTION Features Hyperband 256 preset channels Intellectualized I C-bus control Full function remote control SLEEP timer, ON Timer, OFF Timer Non-signal blue background display and AUTO-POWER-OFF function Games, built-in 500 years' calender Child Lock function, channel swap . . . . . . . . . 2 1 Prog[...]

NOTES FOR OPERATION Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. Please follow[...]

Twin-lead aerial feeder (300 ) Effective range of the remote control operation Antenna Connection (1) Remove the back battery cover. Installation To ensure a bright-colored and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the for UHF/VHF aerial,[...]

Front view Back View Appearance Note: Functions of , MENU, TV/AV, VOL , CH are also provided to the remote controller. 4[...]

Remote Controller Appearance 5[...]

To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. . Turning the Power On/Off & Menu Operation OPERATION *Note: If there are no input signals to the TV when the TV set is on, a blue background will appear on If you want to turn off the TV temporarily, press the button on the remote controller to switch the se[...]

OPERATION Tuning in There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. Use the ASM (Automatic Search Memory) function to preset all the active channels in your local area automatically. To enter into the PRESET menu Pre[...]

OPERATION Tuning in (continued) Use the SEARCH function if desired channels can not be preset with the ASM or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using SEARCH and SKIP functions. SEARCH If ASM can not preset the desired channels, or yo[...]

After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected with POS+/- button. Enter into PRESET menu, select the program number you want to fine-tune. Tuning in (continued) OPERATION Press the POS+/- button to select "SKIP". Press the VOL+/- button to select "SKIP [...]

I D/K M/N B/G If picture and sound’s effect of the channel is instead poor by making use of FINE, you can correct them by making use of AFT. Enter into the PRESET menu, press POS+/- button to select AFT , press VOL+/- button to select AFT ON. Note: If the program is in AFT ON, the position number displayed on the screen will be in green. 1. Press[...]

OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. You can select your desired TV program by one of the following methods. Using the direct select buttons (0~9) and --/---button To select a one-digit position number (0-9) Press the 0~9 button directly. To select a two-digitposition number (10~99) Press -[...]

Press the button to mute the sound. To restore the sound, press the button again or VOL+/- buttons. OPERATION Convenient Picture and Sound Controls COLOUR BRIGHTNESS CONTRAST To select the picture mode Pressing (PERSONAL) paler deeper 38 38 50 50 darker lighter 45 50 48 58 weaker stronger 28 50 63 63 SOFT STANDARD VIVID LIGHT You can select the pic[...]

OPERATION CLOCK SETTING Press the CLOCK button to display the CLOCK menu. (Or press the MENU button repeatedly to select and highlight CLOCK icon, and press VOL+/- button to enter into the CLOCK menu.) TIME setting Making use of this function can set the current time for the TV. Press the POS+/- button to select and highlight TIME . Press the VOL- [...]

To switch the OSD language from English to Chinese, press POS+/- button to select CHINESE ( ),press VOL+ button, the screen menu is automatically displayed in Chinese. To switch the OSD language from Chinese to English, press POS+/- button to select (ENGLISH) press VOL+ button, the screen menu is automatically displayed in English. B/B (blue backgr[...]

OPERATION Playing Games In this TV set there are two built-in games: Falling Cube and Millennium Alien . Below we will describe how to make use of them. To enter into Game Press MENU button to select and highlight GAME icon. Press VOL+/- button to enter into GAME SELECT menu. To select Game GAME SELECT MILLENNIUM ALIEN In GAME SELECT menu, press PO[...]

30MIN 60MIN 90MIN Making use of MILLENNIUMALIEN OPERATION Playing Games (continued) & SLEEP Timer Enter into MILLENNIUM ALIEN , there are characters "SHOOTING START" flying from right to left. When the characters have flied over, you can begin to shoot. Pressing VOL+ button can move the battleplane on the lower screen rightward, press[...]

POS. 9 LOCK OFF CHANGE PASSWORD CHILD LOCK ENTER PASSWORD CHILD LOCK OPERATION Other functions To exit the calendar interface, press RECALL button. 17 24 31 Press the MENU button repeatedly to select and highlight LOCK icon. Press VOL+/- button to enter into CHILD LOCK setting interface, mess POS +/- button to select "CHANGE PASSWORD" or [...]

OPERATION Other functions (continued) Press SCAN button, the TV set will scan the channels from current channel to higher channels one by one, the upper right corner of the screen will display position number, ever program will be displayed for about 2 seconds and then go on scanning until all the programs are scanned over. Press SCAN button again,[...]

CONNECTING OTHER EQUIPMENT External Equipment Connections This set is incorporated with Audio & Video input and output terminals which allow direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. Refer to the owner’s manual of the equipment to be connected [...]

. . . . . . . . . . . . . . . . . . . OTHERS Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. No power, red indicator is not lit up Poor colour, poor tint Spots appear on the screen Stripes appear on the screen Picture is distorted, disturbed or lost D[...]

< 70W 590(W) x 472(H) x 479(D) X~Z+2, S1~S41 2.5W Dimensions(mm): Weight(kg): OTHERS Specifications Power supply: Power consumption: CRT TV system & channel range System VHF PAL-B/G 2-12 Colour system: Sound output: Accessory: AC 240V, 50Hz 23 51cm UHF 21-69 PAL-BG, NTSC (AV) One remote controller CATV * Note: Design and specifications are s[...]

PALSONIC CUSTOMER SERVICE 604-21A63-03 FAX:(02)9313 7555 TEL:(02)9313 7111 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TELEPHONE AUSTRALIA: 1300 657 888[...]