Palsonic PDP4290HD manual

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 107CM CORDLESS REMOTE PLASMA TELEVISION & MONITOR MODEL: PDP4290HD OWNER'S MANUAL N111[...]

Table of Contents Important Safety Precautions ........................................................................................................... Important Notice ................................................................................................................................. Preparations ...................................[...]

Important Safety Precautions 1 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent po[...]

Important Safety Precautions (Continued) 2 15. Stand --- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal inj[...]

Important Notice 3 About Temperature Do not use in hot and cold rooms (locations) When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also[...]

Preparations 4 Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, an[...]

Preparations (Continued) 5 75-ohm coaxial cable (round cable) INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a good signal and will generally [...]

Identification of Controls 6 POWER SWITCH 1. INDICATOR 2. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. Press this button to access the MENU main page. 3. MENU 4. VOLUME Press the VOL or VOL button to directly increase or decrease the sound volume level. In menu operations, these butt[...]

Identification of Controls (Continued) 7 Main Unit (rear view) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Speaker output jacks RS-232 terminal : For service only. The user should not use this terminal. S/PDIF digital audio output (optical): Connects to the digital audio input of a digital audio component. HDMI input: HDMI (High-Definition Multimedia Interfac[...]

Identification of Controls (Continued) 8 Remote Control Unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 POWER : Switches the TV power on or Standby TV/Radio: Switches between TV and Radio mode. (DTV only). EPG: Displays the Electronic Program Guide. (DTV only) FAV +/-: Selects the favourite channel. FAV.LIST: Displays the favourite ch[...]

Connections 9 1. Turn on your TV then press SOURCE button. The SOURCE menu opens. 2. Press or to select AV 1 (or S-Video if using S-VIDEO terminal), then press OK to confirm. 3. Turn on your VCR, insert a videotape and press the Play button. Carefully check the terminals for position and type before making any connections. The illustration of the e[...]

Connections (Continued) 10 How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your TV, then press SOURCE button. The SOURCE menu opens. 2. Press or to select AV 2 , then press OK to confirm. 3. Turn on your camcorder and set it to output mode. (For details, [...]

Connections (Continued) 11 TV REAR Device with component video To connect a device using component video: Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Cb/Pb, Cr/Pr output jacks on the device. Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the device. To pla[...]

Connections (Continued) 12 VCR for Recording Cables are often colour-coded to connectors. Connect red to red, white to white, etc. AV cable TV REAR How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. To record program 1. Turn on your TV, select a program you wish to record. 2. Turn on your VCR, in[...]

Basic Operations 13 Turning On Insert the power cord into the wall outlet. Press the Power Switch on the unit, then press the POWER button on the unit or on the remote control. The unit will be turned on and you will be ready to use its features. Turning Off With the power on, press the POWER button on the unit or on the remote control to turn off [...]

Basic Operation (Continued) 14 Displaying the Information Banner Selecting the Input Signal Source Press SOURCE button. Press or to select the input source. You can quickly go to first item (TV) and last item (HDMI) by pressing or button. Options include: TV - Watch the TV signal. AV1 - Watch the signal from the AV1 input terminals. AV2 - Watch the[...]

Memorizing the Channels 15 Your TV can memorize and store all of the available programs (including TV and Radio programs). After the available programs are memorized, use Channel up/down button to scan through the available stations You can complete an auto search to search for all programs (including radio and TV stations) available to your televi[...]

Memorizing the Channels (Continued) 16 If a channel is not already labelled, you can label the channel so you know what channel you are watching. Navigate to SETUP menu and press or to select Manual Adjust , and then press OK to access the sub-menu. Highlight Program , press or to select a program which you want to label. Press or to select Label ,[...]

Channels List - TV 1. TV 2 2. TV 3 7. 7 Digital 8. TV 7 70. 7 HD Digital 71. 7 Digital 1 72. 7 Digital 2 73. 7 Digital 3 22. TV 9 29 TV 10 Favorite Move Up Skip Move Down Memorising the Channels (Continued) 17 You can make use of channel list to set up your favourite channels. In the channel list, press or to select your favourite program, press RE[...]

Channel and Program Selection 18 Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable of receiving both traditional analog channels and digital channels. When watching digital TV program and you want to listen to radio program, simply press TV/Radio button to switch. To return t[...]

Picture Adjustment 19 Press MENU and the main menu screen displays. Press to select VIDEO menu, press to access the menu. Within the menu, press , , , to navigate through the options or adjust an option. Press OK to confirm a selection or enter a sub- menu . Aspect Ratio You can select the aspect ratio (display proportions) according to your video [...]

Sound Adjustments 20 Using the volume buttons (VOL+ and VOL- ) Press the VOL+ or VOL- to increase or decrease the volume. Using the MUTE Press the MUTE button to temporarily turn off all sound. To restore the sound, press the MUTE button again. Press MENU and the main menu screen displays. Press to select AUDIO menu, press to access the menu. Withi[...]

Sound Adjustments (Continued) 21 Stereo/Bilingual Selection (for analog channels) You can quickly select sound multiplex mode by using the STEREO button on the remote control. NICAM Broadcast Selection This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy NICAM broadcasting, this TV set receives NICAM syst[...]

Rating and Lock Setup 22 Rating T Channel Lock Parental Lock Password The Password setup sub-menu is used to set a new system password or to change an existing system password. By default, the system password is 0000 and you may change it. To access Rating control, to lock or unlock channels, to view locked channels, or to set up Parent Lock, the s[...]

Rating and Lock Setup (Continued) 23 Rating T Channel Lock Parental Lock Password The Channel Lock function blocks the viewing of any channel for which the channel lock has been set. Navigate to the RATE menu and use or to highlight Channel Lock item, press OK to access. Now a password is required to input. Use number buttons to input the password [...]

Time Zone, EPG & Sleep Timer 24 PASSIONS PASSIONS PASSIONS PASSIONS PASSIONS BLUE HEELERS BLUE HEELERS BLUE HEELERS BLUE HEELERS BLUE HEELERS 7 Digital 7 Digita1 7 Digitai2 7 Digital3 7 HD Digital 15:00-15:59 BLUE HEELERS Tom thinks he's found a suitable creche for his grandson Sam - until rumours of baby bashing start to circulate. Channe[...]

Teletext & Subtitle 25 What Is Teletext? Your System receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. To Turn On/Off Teletext Select a TV channel providing the Teletext[...]

Image Adjustment for D-Sub (PC) Mode/Component Mode 26 Before adjusting the image, make sure that you select the correct source (D-Sub or YPbPr). Press MENU and the main menu screen displays. Press to select DISPLAY menu, press to access the menu. Within the menu, press , , , to navigate through the options or adjust an option, press OK to confirm [...]

Troubleshooting 27 If after reading these operating instructions, you have additional questions related to the use of your television, please call the services centre in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Remote control does not operate The batteries could be weak. Repla[...]

Troubleshooting 28 General One or some channels can't be displayed These channels may be locked. Please unlock them (see <Channel Lock Setup> section). These channels may be set skipped in the channel list. You may set it to not skipped or select them with 0-9 number buttons. Lost password You may use the super password (2580)to overwrit[...]

Specifications 29 SVGA Type: Display Size diagonal: Power Supply: Power Consumption: Dimensions (mm): Unit Weight (kg): TV System: PDP TV 107cm AC I00-240V 50/60Hz 350W 1246(W) x 753(H) x 263(D) 39 Analogue: CCIR (PAL-B/G, NTSC (AV)) Digital: DVB-T (2K/8K OFDM) DTV Technical Data Channel Coverage VHF (174MHz~230MHz), UHF (519MHz~ 820MHz) Channel Ba[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 5944030070 YG Ver. 1.0[...]