Palsonic TFTV2035BK manual

LCD TV/DVD COMBO TFTV2035BK USER'S MANUAL[...]

Table Of Contents Important Safety Instructions -------------------------------------------------------- Disc Information --------------------------------------------------------------------------- Front Panel --------------------------------------------------------------------------------- Rear Panel -----------------------------------------------[...]

Important Safety Instructions 2 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equila[...]

Important Safety Instructions 3 NOTES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the produc[...]

Disc Information 4 Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm Operating systems and features of individual DVD discs is specified by the software maker. Please refer to the instructions accompan[...]

View of Unit 5 Front and Right Side Panel 1. 2. 3. 4. 5. 6. 7. 8. Colour TFT screen Speakers Power Indicator During work, it is blue; in standby mode, it is red. Remote Sensor SOURCE button Press repeatedly to select TV, COMPOSITE, S-VIDEO, COMPONENT, VGA or DVD mode. MENU button Press to enter or exit system setup menu. CH button Press to selec[...]

View of Unit (Continued) 6 Back Panel Open the back cover on the right side of the unit's rear panel, and you will see all jacks, as shown below: 1. 2. 3. 4. 5. Y/Pb/Pr Input Jacks Connect Y/Pb/Pr signal source in COMPONENT mode. L/R Audio Input Jacks (for Y/Pb/Pr) Connect L/R audio signal source in COMPONENT mode. AV Output Jack Output TV or [...]

Remote Control 7 View of Remote Control 1. 2. 3. 4. POWER button Press to enter or exit standby mode. TV button Press to shift to TV mode. DVD button Press to shift to DVD mode. P.M. button Press to shift the screen picture modes to different brightness settings: User, Standard, Soft, Bright and Shine. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.[...]

Remote Control 8 MENU button (under DVD mode) Press to enter disc menu in DVD mode; press to exit teletext mode in teletext mode SETUP button Press to enter or exit setup menu in DVD mode; press to display the index page in teletext mode. SLOW button Press to activate slow playback function in DVD mode. In teletext mode, press to display the concea[...]

Remote Control 9 Using of Remote control Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. The operating distance may vary depending to the brightness around. Notes: Do not point bright lights directly at the remote control sensor. Do not place objects betwe[...]

System Connections 10 Do not connect the power cord until all other connections have been made. Ensure that you observe the colour cables when connecting audio and video cables. Before connecting, open the cover on the right side of the unit's rear panel. Connecting Power Supply Power is supplied through the provided power adapter. Connect one[...]

System Connections (Continued) 11 Connecting External AV Signal Source Use the AV cables to connect external AV signal source to AV input jacks on the jack panel of the unit. And use the S-Video cable to connect external S-Video signal source to the S-VIDEO input jack on the rear panel of the unit. After connection, turn on the unit and the externa[...]

System Connections (Continued) 12 Connecting External AV Device (AV Output) Use the AV cables to connect external AV device to the audio and video output jacks on the jack panel of the unit to output TV or COMPOSITE signals. After connection, turn on the unit and external AV device and press the SOURCE button to shift to corresponding mode. AUDIO T[...]

System Connections (Continued) 13 Connecting PC Follow the steps and figure below to connect PC to the unit. 1. 2. 3. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and the other end to the PC. Connect one end of the audio cables to the PC audio input jack on the rear panel of the unit and the other end to the [...]

System Connections (Continued) 14 Connecting TV Antenna Connect TV signal source to the TV jack on the jack panel of the unit. After connection, turn on the unit and press the SOURCE button to shift to TV mode. If you have been scanned TV programs, take the following steps to select a channel. 1. 2. Channel Numbers 0-9 Press the number button to se[...]

TV Function 15 Preparation 1. 2. After connection, press the POWER button to turn on the unit. Press the SOURCE button to shift to TV mode. You can go on with the following operations. Image Setting Press the MENU button once to enter the setup menu. Press the button to select Image and press the ENTER button to enter the menu shown on the right. I[...]

TV Function 16 Brightness Setup Press the button to select Brightness and press the button to adjust the value . Press the MENU button to return to the previous menu. Contrast Setup Press the button to select Contrast and press the button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the button to select[...]

TV Function 17 When the VGA signal is connected to the unit, the Advanced setup menu is shown below: Press the " " button to select the desired item and press the "ENTER" button to enter it's setup menu. Press the "MENU" button to return to the previous menu. Auto Adjust: If the monitor is not clear, you should ca[...]

TV Function 18 Audio Setting Press the MENU button once to enter the setup menu. Press the button to select Audio and press the ENTER button to enter the menu shown on the right. In the Audio setup menu, press the button to select the desired item. Press the EXIT button to return to the previous menu. Volume Setup Press the button to select Volume [...]

TV Function 19 Timer Setting Press the MENU button once to enter the setup menu. Press the button to select Timer and press the ENTER button to enter the menu shown on the right. In the Timer setup menu, press the button to select Off, 15Min, 30Min, 45Min, 60Min, 75Min, 90Min, 105Min or 120Min. Press the EXIT button to return to the previous menu. [...]

TV Function 20 Country Press the button to select the Country and press the ENTER button to enter the menu shown on the right. Press the button to select the desired item. Press the MENU button to return to the previous menu. Auto Scan Press the button to select the Auto Scan and press the ENTER button to start auto scan. The screen will display sh[...]

TV Function 21 Channel Name Press the button to select the Channel Number and press the ENTER button to enter. Then press the button to select letters or press the number buttons to input numbers. Press the MENU button to return to the previous menu. Skip Press the button to select Skip and press the ENTER button to activate or cancel this function[...]

TV Function 22 CH NO Press the button to select CH NO and press the ENTER button to enter. Press the number buttons to enter the channel number. Press the button to return to the previous menu. Store Press the button to select Store and press the ENTER button to store the above operations. Note: The "CH NO" and "Store" items onl[...]

NICAM Function 23 Mono Nicam Mono Mono Stereo The unit support NICAM function under TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will appear corresponding display as shown below: 2. When[...]

DVD Playback 24 Preparation: Disc Loading Steps: 1. 2. 3. 4. Connect the unit to the power supply and press the POWER to turn on the unit. Press the SOURCE button and select DVD mode. Handing the disc with its printed side outward vertically to the disc tray and gently insert the disc into the disc tray. The disc will draw into the unit and load au[...]

DVD Playback 25 Fast Playback During playback, press the or button to activate fast backward or forward playback. During fast playback, press the PLAY button to resume normal playback. SLOW During DVD disc playback, press the SLOW button to activate slow playback. During slow playback, press the PLAY button to resume normal playback. Repeat Use the[...]

DVD Playback 26 CD Playback After loading a CD disc, the unit will play all tracks on the disc by default. You can use the button, or number buttons to select a track. Stop Press the STOP button once to stop playback and press the PLAY button to resume normal playback. Press this button twice repeatedly to stop playback completely. Pause Press the [...]

DVD Playback 27 JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a "PICTURE CD" when they develop your film. Play A[...]

DVD Playback 28 DIVX Playback Pre-operation DIVX is the name of a revolutionary new video code, which is based on the new DIVX compression standard for video. Load a DIVX disc in the disc tray, the player will search and play disc automatically. The screen displays the root menu. Use the , buttons to select desired item and press the ENTER button t[...]

Note Make sure that files are stored in the USB and the SD/MS/MMC card before the connection. USB and SD/MS/MMC Card Function 29 Preparation In DVD mode, connect USB device to the USB port or insert SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit Press the Card button to shift to desired mode and the screen will display th[...]

DVD System Setup 30 Preparations 1. 2. 3. In DVD mode, press the Setup button to open DVD setup menu. Press the button to select setup menu. Press the Setup button again to exit DVD setup. - - General Setup Page - - TV Display Angle Mark OSD Lang Captions Screen Saver Last Memory Media Center Go To General Setup Page General Setup Page Press the DV[...]

DVD System Setup 31 OSD Lang Captions Screen Saver Last Memory The item is used to select the OSD language. 1. 2. 3. 4. Press the direction buttons to select OSD Lang . Press the ENTER button to enter the setup. Use the direction buttons to select items. Press the ENTER button again to confirm selection and return. 1. 2. 3. 4. Press the direction b[...]

DVD System Setup 32 Media Center 1. 2. 3. 4. Press the direction buttons to select Media Center . Press the ENTER button to enter the setup. Use the direction buttons to select DVD, USB, SD/MMC or MS. Press the ENTER button again to confirm selection and return. Audio Setup Page Press the SETUP button to enter the General setup menu, then use the d[...]

DVD System Setup 33 HDCD Setup In the Audio Setup Page, use the direction buttons to select HDCD Setup. Press the ENTER button to enter the setup and the screen will display as below: 1. 2. 3. 4. In the menu, press the ENTER button to enter the setup. Use the direction buttons to select items. Press the ENTER button again to confirm selection and r[...]

DVD System Setup 34 Sharpness Brightness Brightness 0 1. 2. 3. 4. Press the direction buttons to select Sharpness . Press the ENTER button to enter the setup. Use the direction buttons to select High, Medium or Low. Press the ENTER button again to confirm selection and return. Brightness 1. 2. 3. 4. Press the direction buttons to select Brightness [...]

DVD System Setup 35 Preference Setup Note: This item is only available when there is no disc in the disc tray or the disc is stopped completely Press the DVD SETUP button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the below: In the menu, press the ENTER or direction button t[...]

DVD System Setup 36 Default 1. 2. 3. Press the direction buttons to select Default . Press the ENTER button to select Reset . Press the ENTER button, all the settings will return to the default status. - - Preference Page - - Load Factory Setting Audio Subtitle Disc Menu Default Eng Off Eng Reset[...]

Troubleshooting 37 Take steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so. SYMPTOM CHECK ITEM There is n[...]

Specifications 38 Resolution 800 x 600 TFT-LCD Screen Size 20 inches Power AC100~240V, 50/60Hz Power Consumption <60W Dimension 490mm x 478mm x 184mm (LxWxD) Weight About 9.52 Kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are tradema[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888[...]