Palsonic TFTV525WS manual

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 51CM CORDLESS REMOTE LCD TV/MONITOR MODEL: TFTV525WS OWNER'S MANUAL N111[...]

T able of Contents Important Information ............................................................................................................................ Important Safety Precautions ............................................................................................................... Preparations ..............................[...]

Important Information 1 WARNING: TO REDUCE THE RISK OF OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of insinuated dangerous voltage within the product's enclosure that may be of sufficient magnitude to[...]

Important Safety Precautions 2 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent po[...]

Important Safety Precautions (continued) 3 13. Carefully move ---When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. 15. Servicing ---Refer all servicing to qualified service personnel. Servi[...]

Important Safety Precautions (continued) 4 22. Power source ---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it i[...]

Preparations 5 2 Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Note: the illustration is for your reference only, the remote sensor may locate differently with different model. Cautions regarding use of re[...]

Preparations (continued) 6 INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be[...]

Identification of Controls 7 Remote Sensor Power Indicator 1. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. 2. CH+/- Press these two buttons to directly change the TV channel; In OSD MENU, press these buttons to choose the OSD items. 3. VOL+/- Press the VOL+ or VOL- button to directly[...]

Identification of Controls (continued) 8 1. D-Sub input /Audio Line in Connect to the D-Sub/audio output jacks on your PC. 2. Component inputs Connect to the audio and component output jacks of a DVD player or Set-Top Box. 3. Antenna input Allows you to connect cable or outdoor antenna. 4. S-Video input Receive a S-Video signal from external source[...]

Identification of Controls (continued) 9 To adjust backlight This button can not work To adjust menu transparency To access the MENU main page or exit menu operation To select input signal source Picture mode select [0-9] number buttons: Direct channel select Turn the unit on or off Sound mute ENTER: To confirm your operation CH+/-: To switch chann[...]

Connections 10 How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. Note: For better video, you can use the S-video jack if your source supports it. The unit automatically identifies S-Video if you are using S-Video jack. We recommend you to disconnect S-Video cable before you use Video jack . To p[...]

Connections (continued) 1 1 Yellow (VIDEO) White (AUDIO L) Red (AUDIO R) Connect a Camcorder How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your LCD TV, press SOURCE button repeatedly to select Video . 2. Turn on your camcorder and set it to output mode.[...]

Connections (continued) 12 Connect a DVD Player DTV RECEIVER How to connect a DVD Player using Component Video Connections: Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr (or Y, Cb, Cr) output jacks on the DVD player. Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the [...]

Connections (continued) 13 Connect a PC Audio cable D-Sub cable How to connect: Connect a D-Sub cable between the D-Sub jack on the PC and the D-Sub input jack on the unit. Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit. To Watch the PC screen 1. Turn on your LCD TV, press SOURCE button repeatedly to sele[...]

T urning the Unit On and Off 14 Turning the Unit On and Off Turning On Insert the power cord into the wall outlet. Press the Power Switch on the unit. Press the Power button on the remote control. The unit will be turned on and you will be ready to use its features. Turning Off With the power on, press the Power button on the remote control to turn[...]

Memorising the Channels 15 Your LCD TV can memorise and store all the available channels for both antenna and cable channels. After the available channels are memorised, use CH+/- to scan the channels. Storing Channels in Memory Automatically Press MENU to display the menu main page. Press CH+/- repeatedly to select Channel page. Press ENTER or VOL[...]

Memorising the Channels (continued) 16 Adding and Erasing Channels Use number buttons to directly select a channel that will be added or erased. Repeat steps 1~3 in [ Storing Channels in Memory Automatically ] to access the Channel menu page. Press CH+/- repeatedly to select Skip item. Press ENTER or VOL+/- to select On or Off . When the item is se[...]

Basic Operations 17 Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. When you press the CH+ or CH- , the unit changes channels in sequence. You will see all the channels that the unit has memorised. You will not see channels that were erased. Direct Accessing Channels Press the number buttons to go d[...]

Setting Picture 18 Using the Preset Picture Mode Press MENU to display the menu main page. The picture page will be displayed automatically. Press ENTER or VOL+/- to access the Picture submenu. The Picture Mode item is highlighted automatically. Press ENTER or VOL+/- to select a desired picture mode. You may also use the P.MODE button to quickly se[...]

Adjusting Image in D-Sub mode 19 With working in D-Sub mode, this unit allows you to perform several adjustments for image Adjusting the Picture Automatically Press MENU to display the menu main page. Press CH+/- repeatedly to select Image page. Press ENTER or VOL+/- to access the Image page. The Auto Adjustment item will be highlighted automatical[...]

Setting Sound 20 Customising the Sound Press MENU to display the menu main page. Press CH+/- repeatedly to select Audio page. Press ENTER or VOL+/- to access the submenu. Press CH+/- to select Bass , Treble or Balance item. Press VOL+/- to adjust the value of the item. Using the Preset Sound Mode Use the S.MODE button to quickly select Sound mode. [...]

Other Functions 21 120min. Adjusting Menu Transparency Press MENU to display the menu main page. Press CH+/- repeatedly to select Display page. Press ENTER or VOL+/- to access the submenu. Press CH+/- to select Transparency item. Press VOL+/- to adjust transparency. Note: You may use the TRANSPARENCY button to quickly adjust the menu transparency. [...]

T roubleshooting 22 Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms No power Check item "Ghost" or double images Check that the AC power cord is plugged into the mains socket. Unplug the power cord, wait for 60 seconds. Then reinsert plug into the mains socket and turn[...]

Care and Maintenance 23 LCD Display panel information Note: The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time. Important Information Regarding Use of Video Games, Co[...]

Specifications 24 Power supply: Power Consumption: Screen: Dimensions: Weight: TV system & channel coverage: System PAL-B/G TV system: Speaker: Accessories AC 100-240V 50/60Hz 130W 51cm 568 (W) x 162 (D) x 434 (H) (mm) 9kg VHF 2-12 UHF 21-69 CATV X~Z+2, S1~S41 PAL BG, NTSC (AV) 8W, 8 x 2 Owner's manual x 1 Remote control unit x 1 Design an[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L20Y193-00 V1.0[...]