Panasonic HD3700H manual

Digital Video Cassette Recorder Operating Instructions (Software) AJ- E P[...]

– 2 – Contents Menu screen transitions . . . . . . . . . . . . . . 4 Turning on the power . . . . . . . . . . . . . . . . 7 HOME menu displays . . . . . . . . . . . . . . . 8 HOME menu . . . . . . . . . . . . . . . . . . . . . 13 HOME SET UP menu . . . . . . . . . . . . . . 17 VIDEO IN menu . . . . . . . . . . . . . . . . . . . 22 VIDEO OUT HD [...]

– 3 – Contents SET UP menu . . . . . . . . . . . . . . . . . . . 111 INTERFACE SET UP menu . . . . . . . . 112 PANEL SET UP menu . . . . . . . . . . . . . 118 PANEL SET UP (OP MAP REMOTE) menu . . . . . . . . . . . . . . . . . . . . . . . . . 120 PANEL SET UP (OP MAP LOCAL) menu . . . . . . . . . . . . . . . . . . . . . . . . . 123 USER SET UP [...]

– 4 – Menu screen transitions HOME F8 HOME SET UP AUDIO IN F6 AUDIO IN PCM INPUT SELECT AUDIO IN CUE INPUT SELECT F7 F8 AUDIO IN SET UP AUDIO OUT F7 AUDIO OUT MONITOR VIDEO IN F7 F7 F10 F9 F9 F10 F1 1 F12 F1 F2 F3 VIDEO OUT CONVERT HD_TO_SD VIDEO OUT CONVERT SD_TO_HD VIDEO OUT CONVERT HD_TO_HD F9 F1 1 F12 F8 VIDEO OUT VIDEO OUT HD VIDEO OUT HD [...]

– 5 – Menu screen transitions MUL TI CUE F8 MUL TI CUE SET UP ASSEMBLE ASSEMBLE MANUAL EDIT F8 ASSEMBLE MANUAL EDIT SET UP F12 F12 F1 F2 F3 F4 F5 F6 F7 F10 F1 1 F1 1 F13 F12 HOME SET UP INSERT/ASSEMBLE MANUAL EDIT SET UP INSERT/ASSEMBLE AUTO EDIT SET UP SYSTEM SET UP TC/CHR SET UP AUDIO IN SET UP AUDIO OUT SET UP INTERF ACE SET UP P ANEL SET UP[...]

– 6 – Menu screen transitions TEST F2 RF DIAG F2 DIAG MASKED F3 DIAG LAST F3 AUDIO F4 MECHA F5 SYSTEM F6 FRONT F7 F1 F1 SERVO F13 IC CARD F1 USER MUL TI CUE ERROR LOG F2 F1 TEST FRONT P ANEL F2 TEST FRONT KEY CHECK IO F1 F2 SELECT MONITOR MONITOR F3 F3 F2 F3[...]

– 7 – Turning on the power Turn on the power. « The HOME menu is displayed. This VTR comes already programmed with menus that correspond to specific operating objectives, and the operations performed on each differ from one menu to another. When a menu is selected using a menu se- lection button, what appears on the display changes, and the fu[...]

– 8 – HOME menu displays ∑ Audio signal display area (Either 8 or 4 channels will be automatically displayed depending on the format used.) Use this to adjust the level of the input audio signals on the AUDIO IN menu. Alternatively, it is used to adjust the level of the audio playback output signals on the AUDIO OUT menu. Press the L/R button[...]

– 9 – HOME menu displays REF : This indicates the status of the output reference signal which has been selected by the VTR. HD REF59: HD REF with a field frequency of 59.94 Hz is selected. HD REF47: HD REF with a field frequency of 47.96 Hz is selected. HD REF48: HD REF with a field frequency of 48.00 Hz is selected. HD REF50: HD REF with a fie[...]

– 10 – HOME menu displays ∑ Setting mode display area The displays appearing in this area indicate the modes which have been set. CUT: Appears when the audio cut editing mode is set. XFADE: Appears when the audio cross-fade editing mode is set. VFADE: Appears when the audio V fade editing mode is set. INTRP: Appears when the time code interpo[...]

– 11 – HOME menu displays ∑ Setting the initial value for the time code (1) Press the center cursor key. The display now appears in reverse video. (2) Press the center cursor key again so that the cursor is made to serve as a column cursor, and then use the number key to input the value. To set a letter from A to F in the initial value of the[...]

– 12 – HOME menu displays ∑ Setting and checking the cue time (1) Press the center cursor key. The time code display now appears in reverse video. (2) Press the [ 4 ] cursor key. The cue time now appears in reverse video. (3) Press the center cursor key again so that the cursor is made to serve as a column cursor, and then use the number keys[...]

– 13 – HOME menu This menu is displayed by pressing the following key: HOME [4] : Cassette tape in the 4-channel audio format. [8] : Cassette tape in the 8-channel audio format. (This display indicates the C bit pin position of the cassette tape.) If system format does not matched with the C bit pin position of the cassette tape, 4 or 8 display[...]

– 14 – HOME menu Key F1 F2 F3 F4 F5 F6 F7 Key designation OUTPUT For selecting the audio/video output signals. FREEZE For outputtting the flash freeze frame. EJT CTL For CTL operation in EJECT mode. TC/CTL For timer mode switching. TC/UB For switching the display between the TC and UB values. TC CLR For clearing the TC value. (TCG CLR) For clea[...]

– 15 – HOME menu Key F8 F9 – F10 F11 F12 F13 Key designation SET UP —— PREAD A ° For setting audio pre-read to ON or OFF (SD mode only) PREAD V ° For setting video pre-read to ON or OFF (SD mode only). REC INH For setting the record inhibit mode. Description Transfers the VTR to the HOME SET UP menu screen. This is used during insert ed[...]

– 16 – HOME menu ∑ Pre-read editing (1) Set the pre-read function to ON by pressing the F key and F11 key (PREAD A) or F12 key (PREAD V) together. (2) Perform the connections for pre-read editing as shown in the figure below. (3) Proceed with pre-read editing in the desired insert editing mode. (4) Restore the original connections upon comple[...]

– 17 – HOME SET UP menu This menu is displayed by pressing the following keys: ) OR ) F1 SET UP F8 HOME F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 18 – HOME SET UP menu Key F1 F2 F3 F4 F5 F6 F7 F8 Key designation SYNC PLY Sync play. AT PLY For switching the playback picture in JOG/VAR. PRG PLAY Program play. PRG PLAY Program play. CAP LOCK ° 3 For setting the capstan servo lock TAPE MD. Tape mode when the VTR is in standby OFF. —— EXIT Description Automatically compensates for the [...]

– 19 – HOME SET UP menu Key F9 – F10 F11 F12 F13 Key designation —— PREROLL For selecting the preroll time. STILL For setting the STOP/STILL (static frame) mode holding time. STBY OFF For setting the time for the transfer to standbay OFF. Description After pressing the F11 key, turn the ADJUST control. Selection can be made between 0 and [...]

– 20 – HOME SET UP menu ∑ Reference OUT REF: This sets the video output signal reference. AUTO: When the REF VIDEO connector input sig- nal is available, the output reference is locked to REF VIDEO; when it is not avail- able, it is locked to the INPUT input signal. When neither the REF VIDEO nor INPUT input signal is available, the internal [...]

– 21 – HOME SET UP menu ∑ Programmed play function (1) Press the F4 (PRG PLY) key. (2) Set the step to FINE or COARSE using the F3 (PRG PLY) key. (3) Set the programmed play speed using the ADJUST control. (4) Press the PLAY and VAR buttons together. (5) To change the playback speed, turn the ADJUST control while pressing the VAR button. (6) [...]

– 22 – VIDEO IN menu This menu is displayed by pressing the following key: VIDEO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 23 – VIDEO IN menu Key F1 F2 F3 – F11 F12 F13 Key designation INPUT For selecting the HD video input signals. INT SG For selecting the type of HD internal signals. —— INT SG For selecting the type of SD internal signals. INPUT For selecting the SD video input signals. Description DIGITAL: Selects the serial input signals. INT SG: Select[...]

– 24 – VIDEO OUT HD menu This menu is displayed by pressing the following key: VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 25 – VIDEO OUT HD menu Key F1 F2 F3 F4 F5 – F7 F8 F9 F10 F11 – F13 Key designation For adjusting the Y level. PB For adjusting the P B level. PR For adjusting the P R level. BLACK.L For adjusting the black level. —— SET UP SD CONVERT —— Description j¶ to i 3 dB ( j 3 dB to i 3 dB in fine adjustment mode) ≥ Establishes the fine [...]

– 26 – VIDEO OUT HD SET UP menu This menu is displayed by pressing the following keys: > F8 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 27 – VIDEO OUT HD SET UP menu Key F1 F2 – 5 F6 F7 F8 F9 – F11 F12 F13 Key designation LINE CONV ° —— SERIAL SYS PHASE INTERP. Interpolation EXIT —— STATE —— Description Line conversion function OFF: No line conversion; when a 1035 tape is played back, 1080 signals with black bands added at the top and bottom of the picture ar[...]

– 28 – VIDEO OUT HD SET UP STATE menu This menu is displayed by pressing the following keys: (or ) >> OR >> (or ) > F12 F12 F11 F9 VIDEO OUT F12 F8 AUDIO OUT VIDEO OUT Description NORMAL: The standard mode is established (E-E through mode is turned OFF). THROUGH: When the EE/EE1 is selected, the E-E through mode (AV minimum delay[...]

– 29 – VIDEO OUT SET UP STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR ’ s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ° The cursor will[...]

– 30 – VIDEO OUT SD menu This menu is displayed by pressing the following keys: > F9 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 31 – VIDEO OUT SD menu Key F1 F2 F3 F4 F5 – F6 F7 F8 – F9 F10 F11 F12 F13 Key designation Y For adjusting the Y level. PB For adjusting the P B level. PR For adjusting the P R level. BLACK.L For adjusting the black level. —— HD —— CONVERT CMPST SDI —— Description j¶ to i 3 dB ( j 3 dB to i 3 dB in fine adjustment mode) ≥ Es[...]

– 32 – VIDEO OUT SD SET UP COMPOSITE menu This menu is displayed by pressing the following keys: >> F11 F9 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 33 – VIDEO OUT SD SET UP COMPOSITE menu Key F1 F2 – F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation COMB FIL ° 1 For controlling the comb filter. —— SYS SC For adjusting the system subcarrier. SYS H For adjusting the system H phase. INTERP. Interpolation EXIT —— 7.5%STUP For adding 7.5% setup to the composite output. LINE BLK ° [...]

– 34 – VIDEO OUT SD SET UP CMPST STATE menu This menu is displayed by pressing the following keys: (or [AUDIO OUT]) >> OR >> (or ) > F12 F12 F11 F9 VIDEO OUT F12 F8 VIDEO OUT Description NORMAL: The standard mode is established (E-E through mode is turned OFF). THROUGH: The E-E through mode (AV minimum delay mode) is established.[...]

– 35 – VIDEO OUT SD SET UP CMPST STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR ’ s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ° The cu[...]

– 36 – VIDEO OUT SD SET UP SDI menu This menu is displayed by pressing the following keys: )) F12 F9 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 37 – VIDEO OUT SD SET UP SDI menu ° 1 This adjustment is possible only when the AJ-UDC3700P HD-SD format converter board (optional accessory) has been installed. ° 2 In a mode other than the 525i (480/59i) mode, this adjustment is possible only when the AJ-UDC3700P HD-SD format converter board (optional accessory) has been installed. Key F1[...]

– 38 – VIDEO OUT SET UP LINE BLK (video output line blanking) menu This menu is displayed by pressing the following keys: )) (or ) ) . F11 F12 F11 F9 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 – F7 F8 F9 F10 F11 F12 – F13 Key designation —— EXIT ALL ON ALL OFF LINE BLK —— Description Returns the VTR to the VIDEO OU[...]

– 39 – VIDEO OUT SET UP LINE BLK (video output line blanking) menu ∑ Setting the line blanking The blanking lines in the vertical blanking period can be set in 1-line increments. (1) Press the center cursor key. The cursor now appears. (2) Move the cursor and select the lines to be blanked. (3) Press the center cursor key to select ON or OFF [...]

– 40 – VIDEO OUT SD SET UP SDI STATE menu This menu is displayed by pressing the following keys: (or ) )) OR )) (or ) ) . F12 F12 F11 F9 VIDEO OUT F12 F8 AUDIO OUT VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 – F7 F8 F9 – F13 Key designation —— EE_MODE —— EXIT —— Description NORMAL: The standard mode is est[...]

– 41 – VIDEO OUT SET UP STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR ’ s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ° The cursor will[...]

– 42 – VIDEO OUT CONVERT menu (This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.) This menu is displayed by pressing the following keys: ) F10 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 – F6 F7 F8 F9 F10 – F1 3 Key designation HD_TO_SD SD_TO_HD HD_TO_HD[...]

– 43 – VIDEO OUT CONVERT HD_TO_SD menu (This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.) This menu is displayed by pressing the following keys: )) F1 F10 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 – F7 F8 F9 – F13 Key designation MODE RESPONSE ENHANCE[...]

– 44 – VIDEO OUT CONVERT SD_TO_HD menu (This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.) This menu is displayed by pressing the following keys: )) F2 F10 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 – F7 F8 F9 – F13 Key designation MODE RESPONSE ENHANCE[...]

– 45 – VIDEO OUT CONVERT HD_TO_HD menu (This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.) This menu is displayed by pressing the following keys: )) ° This menu is operational when 1080/23.98p or 1080/24p has been set as the system format. F3 F10 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 [...]

– 46 – AUDIO IN menu This menu is displayed by pressing the following key: AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 The digital audio input statuses are displayed here. PRE EMPHASIS ON: Pre-emphasis is applied to the input signals. OFF: Regular signals with no pre-emphasis are supplied.[...]

– 47 – AUDIO IN menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation CH-1 For adjusting the audio CH1 input level. CH-2 For adjusting the audio CH2 input level. CH-3 For adjusting the audio CH3 input level. CH-4 For adjusting the audio CH4 input level. CUE For adjusting the cue audio input level. PCM CUE SET UP CH-MIX CH-5 For ad[...]

– 48 – AUDIO IN PCM INPUT SELECT menu This menu is displayed by pressing the following keys: > F6 AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 49 – AUDIO IN PCM INPUT SELECT menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 Key designation CH-1 For selecting the recording signals of digital audio CH1. CH-2 For selecting the recording signals of digital audio CH2. DIGITAL For selecting the CH1 and CH2 digital input signals. CH-3 For selecting the recording signals of digital audio CH3. CH-4 For se[...]

– 50 – AUDIO IN PCM INPUT SELECT menu Key F10 F11 F12 F13 Key designation CH-6 For selecting the recording signals of digital audio CH6. DIGITAL For selecting the CH7 and CH8 digital input signals. CH-7 For selecting the recording signals of digital audio CH7. CH-8 For selecting the recording signals of digital audio CH8. Description ANA CH2: S[...]

– 51 – AUDIO IN CUE INPUT SELECT menu This menu is displayed by pressing the following keys: > F7 AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 52 – AUDIO IN CUE INPUT SELECT menu Key F1 F2 F3 F4 F5 – F7 F8 F9 F10 F11 F12 F13 Key designation CH-1 For setting cue mixing for CH1. CH-2 For setting cue mixing for CH2. CH-3 For setting cue mixing for CH3. CH-4 For setting cue mixing for CH4. —— EXIT CUE For selecting the cue audio recording signals. CH-5 For setting cue mixing for C[...]

– 53 – AUDIO IN SET UP menu This menu is displayed by pressing the following keys: > OR > F6 SET UP F8 AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 54 – AUDIO IN SET UP menu Key F1 F2 – F5 F6 F7 F8 F9 F10 F11 – F13 Key designation INT SG MD —— PEAK HOLD For setting the peak hold. SCALE For switching the level meter scale. EXIT DATA ADV ° 1 STYLE ° For setting the digital audio input/output data format. —— Description For selecting the internal audio test signal. TONE: Refer[...]

– 55 – AUDIO IN CH-MIX SELECT menu This menu is displayed by pressing the following keys: > F9 AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 – F5 F6 F7 F8 F9 – F13 Key designation SELECT —— CH-MIX (ON) For mixing the input signals with the signals played back simultaneously and recording them. CH-MIX (OFF) For prohib[...]

– 56 – AUDIO IN CH-MIX SELECT menu ∑ Mix-and-record (1) Press the F6 (CH-MIX) key to set it ON. The mixing graph display now appears. (2) Press the center cursor key to display the cursor. (3) Use the cursor keys to move the cursor to the channel in which the sound is to be mixed. (4) Press the center cursor key to select the signals to be mi[...]

– 57 – AUDIO IN CH-MIX SELECT menu ∑ Mix-and-record (continued) (5) Move the cursor to the mixing ratio display area, and turn the ADJUST control to set the ratio at which the signals are to be mixed (in 1% increments). Mixing ratio display area O Notes N ≥ When the PLAY button is pressed after the CH-MIX mode has been set, the F6 (CH-MIX) [...]

– 58 – AUDIO OUT menu This menu is displayed by pressing the following key: AUDIO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 The digital audio input statuses are displayed here. PRE EMPHASIS ON: Pre-emphasis is applied to the input signals. OFF: Regular signals with no pre-emphasis are supplied.[...]

– 59 – AUDIO OUT menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation CH-1 For adjusting the audio CH1 playback level. CH-2 For adjusting the audio CH2 playback level. CH-3 For adjusting the audio CH3 playback level. CH-4 For adjusting the audio CH4 playback level. CUE For adjusting the cue audio playback level. —— MONITOR SE[...]

– 60 – AUDIO OUT MONITOR menu This menu is displayed by pressing the following keys: > F7 AUDIO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 61 – AUDIO OUT MONITOR menu Key F1 F2 F3 F4 – F6 F7 F8 F9 – F10 F11 F12 F13 Key designation MODE For selecting the mode. L CH R CH —— A.MONI For selecting the audio monitor output level adjustment. EXIT —— R CH L CH MODE Description Selects the VTR mode in which the monitor output signals are automatically switched to the cue sign[...]

– 62 – AUDIO OUT SET UP menu This menu is displayed by pressing the following keys: > OR > F7 SET UP F8 AUDIO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 63 – AUDIO OUT SET UP menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 Key designation A/V PHASE ° For adjusting the audio output phase in relation to the video phase. JOG PROC For setting the digital process ON/OFF. VAR PROC For setting the digital process ON/OFF. PB FADE Playback fade. PB OUT Selects the audio output when playback is started. PEAK HOLD[...]

– 64 – AUDIO OUT SET UP menu Key F10 F11 F12 F13 Key designation STYLE ° —— STATE —— Description This menu item can be set by pressing the F10 key together with the F key. PCM: The style is set to the normal PCM audio mode. DATA: The style is set to the data mode (compressed audio: Dolby-E). Transfers the VTR to the AUDIO OUT SET UP ST[...]

– 65 – AUDIO OUT SET UP menu ∑ Adjusting the audio output signals in relation to the video signals (1) Press the F1 (A/V PHASE) key to put the display in reverse video. (2) Adjust the phase difference using the ADJUST control. When the ADJUST control is turned, the display changes to VAR. (The adjustment can now be varied in 1-sample incremen[...]

– 66 – AUDIO OUT SET UP STATE menu This menu is displayed by pressing the following keys: >> F12 F8 AUDIO OUT Description NORMAL: The standard mode is established (E-E through mode is turned OFF). THROUGH: The E-E through mode (AV minimum delay mode) is established. ° A discrepancy occurs between the video (audio) output and time code ou[...]

– 67 – – 67 – VIDEO OUT SET UP STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR ’ s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ≥ The[...]

– 68 – AUDIO OUT SDI ASIGN menu This menu is displayed by pressing the following keys: >> F12 F8 AUDIO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 69 – Description Selects the channels whose signals are to be output to HD SDI embedded audio channels 1 through 4. CH1 T 4: The signals of CH1 through CH4 are output. CH5 T 8: The signals of CH5 through CH8 are output. OFF: No signals are output. Selects the channels whose signals are to be output to HD SDI embedded audio channels 5 through [...]

– 70 – TC/CHR menu This menu is displayed by pressing the following key: TC/CHR F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

– 71 – TC/CHR menu Description INT: Built-in time code generator. EXT LTC: LTC time code from TIME CODE input connector. S LTC: LTC time code added to serial signals; not displayed when the SD mode is selected. S VTC: VTC time code added to serial signals; not displayed when the SD mode is selected. EXT VITC: VITC time code added to video signa[...]

– 72 – TC/CHR menu Description ON: CF BIT is recoorded. OFF: CF BIT is not recorded. ≥ When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key, the VTR conforms to the external color frame bit. Transfers the VTR to the TC/CHR SET UP menu screen. Transfers the VTR to the TC/CHR CONVERT menu screen. LTC: LTC is read out all the time. AUTO[...]

– 73 – TC/CHR menu ∑ Changing the superimposing position (1) Move the position using the cursor keys. ≥ When a cursor key is held down, the cursor will move more quickly. ≥ When the center cursor key is pressed, the superimposing re- turns to its initial position. ∑ Time code displays and VTR’s operating modes Display the time codes a[...]

– 74 – TC/CHR menu ∑ Time code displays and VTR’s operating modes (continued) VTR’s operating modes STOP F.FWD PREVIEW REW REVIEW EDIT PLAY (edit playback) PREROLL EDIT REC (edit recording) AUTO EDIT (automatic editing) CUE UP JOG STANDBY OFF VAR EJECT SHTL DMC PREVIEW REC DMC EDIT REC (display blinks during Pre-CTL operation) OUT PREVIEW[...]

– 75 – TC/CHR menu Table of user bit settings F1 (SOURCE) INT (internal) TC S LTC S VITC EXT LTC EXT LTC F2 (TC SLAVE) —— —— SLAVE DIRECT F3 (UB SLAVE) ON OFF ON OFF ON OFF F10 (TCR) LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUDIO VITC LUBG mode REGEN INT UB PRESET INT UB EXT REGEN INT UB PRESET INT UB DI[...]