Panasonic TC-50PS24 manual

TM Operating Instructions 50” Class 1080p Plasma HDTV (49.9 inches measured diagonally) Manual de instrucciones T elevisión de alta definición de 1080p y clase 50” de Plasma (49,9 pulgadas medidas diagonalmente) For more detailed instructions, refer to the Operating Instructions on the CD-ROM. T o view the Operating Instructions on the CD-ROM[...]

2 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8) Do not install near any heat sources such as radiators, heat r[...]

3 Do not place any objects on top of the Plasma TV . If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV , please consult an Authorized Service Center . In the unlikely event that you receive a shock from this pro[...]

4 CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendati ons. Flat panel displays that are inappro priately situated on dressers, bookcases, shelves, desks, speakers, c hests or carts may fall over and may cause personal injury or even death. The consum[...]

5 Do not display a still picture for a long time This causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty . 4 : 3 12 T o prevent the “Image retention”, the screen saver is automatically activated after a few minutes if no signals are sent or no operatio[...]

6 Accessories/Optional Accessory Accessories Remote Control T ransmitter N2QA YB000485 Batteries for the Remote Control T ransmitter (2) AA Battery AC cord Pedestal TBLX0135 Product Registration Card (U.S.A.) Operating Instructions (Book) VIERA Concierge and Quick start guide Installing the remote’ s batteries Open Hook Note the correct polarity [...]

7 Accessories Assembly screws (4 of each) A XYN5+F18FN M5 × 18 (Silver) B THEL080N M5 × 30 (Black) Poles (2) L R L or R is printed at the bottom of the poles. Base (1) Attaching the pedestal to TV ■ Assembling the pedestal Fix securely with assembly screws A . (T otal 4 screws) T ighten screws firmly . A L R Pole Front Pole Base ■ Set-up Carr[...]

8 Accessories/Optional Accessory (Continued) AC cord connection T o attach T o remove Insert it firmly until the tabs on both sides click into place. Keep pushing both sides until they snap and pull. tc_50_ps24_eng_簡易_0574.indb 8 tc_50_ps24_eng_簡易_0574.indb 8 2010/01/07 17:56:03 2010/01/07 17:56:03[...]

9 T o connect the antenna terminal Basic Connection Note Not all cables and external equipment shown in this book are supplied with the TV . For more details on the external equipment’s connections, please refer to the operating manuals for the equipment. When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from[...]

10 High-Definition Standard-Definition Note For more details on the external equipment’s connections, please refer to the operating manuals for the equipment. Basic Connection (Continued) T o use HDMI terminals HDMI A V OUT e.g. Blu-ray Disc player A V Equipment Connecting to HDMI terminals will enable you to enjoy high-definition digital images [...]

11 Remote control Switches TV On or Of f (Standby) Changes the input mode Displays Main Menu Displays Sub Menu Colored buttons (Use for various functions following the instructions on screen.) V olume up/down Sound mute On/Off Changes aspect ratio Switches to previously viewed channel or input modes Operate the external equipment with “VIERA Link[...]

12 First T ime Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 17) is set to “No”. or T urn the TV On with the POWER button or (Remote) (TV) Configure your viewing mode Select your language Language / Idioma / Langue [...]

13 Press to return to the previous screen Auto channel setup (ANT/Cable setup) Select the connected Antenna in terminal ANT/Cable setup Step 3 of 6 Select “Not used” when viewing TV via Satellite receiver or Cable box. Note: Select “Cable” when viewing via Cable DTA Box. Cable Antenna Not used ANTENNA Cable In ANTENNA Cable In OK RETURN Sel[...]

14 Note About broadcasting systems Analog (NTSC): Conventional broadcasting Digital (A TSC): New programming that allows you to view more channels featuring high-quality video and sound Select the Input labels (Label inputs) Select NEXT then press OK to go to next step. Label inputs Step 5 of 6 Press RIGHT to select a label for each input. Example:[...]

15 How to Use Menu Functions V arious menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. Press to exit from a menu screen Press to return to the previous screen Display the menu Shows the functions that can be adjusted. Some functions will be disabled depending on the [...]

16 Menu list Menu Item Adjustments/Configurations (alternatives) Picture Reset to defaults* Resets all picture adjustments to factory default settings except for “Advanced picture”. Picture mode Basic picture mode (Vivid/Standard/Cinema/Custom) Contrast, Brightness, Color , Tint, Sharpness Adjusts the color , brightness, etc. for each picture m[...]

17 Menu list Menu Item Adjustments/Configurations (alternatives) Setup Channel surf mode Sets the mode to select the channel with the Channel up/down button. (All/Favorite/Digital only/Analog only) • Favorite: Only channels registered as F A VORITE. Language Selects the screen menu language. Clock Adjusts the clock. ANT/Cable setup Sets channels.[...]

18 FA Q Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For details For additional assistance, please contact us via the website at: www .panasonic.com/contactinfo www .panasonic.ca[...]

19 If there is a problem with your TV , please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer , quoting the model number and serial number (both found on the rear of the TV). No sound is produced Sound is unusual Are the speakers?[...]

20 P ANASONIC CONSUMER ELECTRONICS COMP ANY , DIVISION OF P ANASONIC CORPORA TION OF NORTH AMERICA One Panasonic W ay Secaucus, New Jersey 07094 Panasonic Plasma T elevision Limited W arranty Limited W arranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (ref[...]

21 Customer Services Directory (for U.S.A. and Puerto Rico) Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www .panasonic[...]

22 Limited W arranty (for Canada) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 P ANASONIC PRODUCT – LIMITED W ARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option[...]

Note[...]

Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes.[...]