Panasonic TH-65PF10WK manual

TQBC2236 Please read these instructions before operating your set and retain them for future reference. Model No. Operating Instructions High De fi nition Plasma Display English The illustration shown is an image. TH-50PF10WK TH-65PF10WK[...]

2 Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence. Retain your pur chase r eceipt also, and not[...]

3 Important Safety Notice W ARNING 1) T o prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water ( fl ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked fl ame sources, such as lighted candles, should be placed o[...]

4 Safety Precautions W ARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) Always be sure to ask[...]

5 Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display . Do not stick any foreign objects into the Plasma Display . • Do not insert any[...]

6 Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display . • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwis[...]

+ + - - 7 Accessories Power supply cord Fixing bands × 2 Batteries for the Remote Control T ransmitter (2 × R6 (UM3) Size) Remote Control T ransmitter EUR7636070R Operating Instruction book Accessories Supply Check that you have the accessories and items shown Remote Control Batteries Requires two R6 batteries. 1. Pull and hold the hook, then ope[...]

1 2 1 2 1 2 SERIAL PC IN AUDIO SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN SLOT2 8 Connections Speaker terminal (R) Speaker terminal (L) – Cable fi xing bands Secure any excess cables with bands as required. When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker ’s Install[...]

1 2 SERIAL PC IN AUDIO SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN 1 2 1 2 SLOT2 9 Connections Speaker terminal (R) Speaker terminal (L) – Cable fi xing bands Secure any excess cables with bands as required. When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker ’s Install[...]

AUDIO PC IN TH-42PS9 10 1 6 7 8 3 9 4 5 10 15 14 13 12 1 1 2 Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input T erminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 1 10 kHz and vertical scanning frequency of 48 to[...]

SERIAL 6789 13 4 5 2 STX C1 C2 C3 P1 P2 P3 P4 : P5 ETX 11 SERIAL T erminals connection Notes: • Use the RS-232C cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface [...]

SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN AUDIO OUT Y , P B , P R , OUT P R P B Y L R COMPONEN T VIDEO OUT PC SLOT1 SLOT2 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN HDMI A V OUT HDMI A V OUT This unit has terminal boards equivalent to Dual HDMI T erminal Board (TY -FB10HMD) and BNC Component Video T erminal Board[...]

INPUT MENU ENTER/ + / VOL - / PC 16:9 Italiano Español ENGLISH (US) Русский English (UK) Deutsch Français OSD Language Set Select 13 Power On / Off Connecting the AC cord plug to the Plasma Display . Fix the AC cord plug securely to the Plasma Display with the clamper . (see page 8, 9) Connecting the plug to the W all Outlet Notes: • Mai[...]

14 Power On / Off Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green T urn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode. Note: Dur[...]

INPUT MENU ENTER/ + / VOL - / INPUT MENU ENTER/ + / VOL - / 15 Initial selections Selecting the On-Screen Menu Language Press to display the Setup menu. Press to select the OSD Language. Press to select your preferred language. Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Input terminal will not be selected if[...]

INPUT MENU ENTER/ + / VOL - / 16 Basic Controls Main Unit MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 18) INPUT button (INPUT1, INPUT2, INPUT3 and PC selection) (see page 15) V olume Adjustment V olume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the curso[...]

Off timer 90 2 3 1 PC 4:3 17 Basic Controls Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 13, 14). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. SET UP button (see page 18, 19) SOUND button ([...]

1/2 Picture Normal Normalise Normal 25 0 0 0 5 Brightness Sharpness Picture Mode Colour Contrast Hue 2/2 Picture Advanced settings White balance Colour Management Normal Off On 0 Normal Normalise Auto Setup Pos. /Size V -Pos 0 H-Pos V -Size Dot Clock H-Size Clock Phase 1:1 Pixel Mode Off 0 0 0 0 0 0 0 Normal Normalise Pos. /Size V -Pos H-Pos 0 V -S[...]

Sync P-NR Signal H-Freq. V -Freq. kHz Hz 33.8 60.0 [ RGB ] Cinema reality Block NR Mosquito NR Auto Off Off Off Off Cinema reality P-NR Signal [ Component ] Block NR Mosquito NR Off Off Off Off 3D Y/C Filter (NTSC) Colour system Signal Cinema reality Panasonic Auto (4:3) [ AV ] P-NR Block NR Mosquito NR On Auto Off 4:3 Off Off Off Set up TIMER POWE[...]

4 : 3 16 : 9 4 : 3 Zoom 16 : 9 Panasonic Auto Just INPUT MENU ENTER/ + / VOL - / 20 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. [During MUL TI PIP Operations] • Picture and Picture, Picture in Picture : • Others : Aspect switching is not possibl[...]

0 Normal Normalise Auto Setup Pos. /Size V -Pos 0 H-Pos V -Size Dot Clock H-Size Clock Phase 1:1 Pixel Mode Off 0 0 0 0 0 0 0 Normal Normalise Pos. /Size V -Pos H-Pos 0 V -Size H-Size 1:1 Pixel Mode Off Auto Setup 21 Adjusting Pos. /Size 1 Press to display the Pos. /Size menu. Press to select Auto Setup / H-Pos / H-Size / V -Pos / V -Size / Dot Clo[...]

22 Adjusting Pos. /Size While the Pos. /Size display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings. Helpful Hint ( / Normalise Normalisation) Auto Setup Automatically adjust H-Pos / V -Pos / Cl[...]

AB A B A B BA B A B A PC1 VIDEO2 PC1 VIDEO2 VIDEO2 VIDEO1 PC1 VIDEO2 A A A C B B B D MUL TI PIP MUL TI PIP MUL TI PIP SW AP SWAP SW AP SELECT 23 MUL TI PIP Press repeatedly . Each time pressing this button main picture and sub picture will be displayed as follows below . Press to swap main picture and sub picture. Press to select the input mode. Un[...]

One screen Advanced PIP Main screen Sub screen 12 3 65 4 Options On Weekly Command Timer Onscreen display Off Initial INPUT Initial VOL level 1/3 Off Off 0 0 Maximum VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP 24 Advanced PIP 1 2 3 5 Press to display the Setup menu. Press to select “OSD Language”. Press and [...]

1/2 Picture Normal Normalise Normal 25 0 0 0 5 Brightness Sharpness Picture Mode Colour Contrast Hue 2/2 Picture Advanced settings White balance Colour Management Normal Off On Advanced settings Normal Normalise 0 0 2.2 Off 1/2 Black extension AGC Gamma Input level Advanced settings 0 0 0 0 0 0 2/2 W/B Low B W/B High R W/B Low R W/B Low G W/B High [...]

26 Picture Adjustments Notes: • “Colour” and “Hue” settings cannot be adjusted for “RGB/PC” and “Digital” input signal. • Y ou can change the level of each function (Contrast, Brightness, Colour , Hue, Sharpness) for each Picture Mode. • The “Hue” setting can be adjusted for NTSC signal only during “A V (S Video)” inpu[...]

Sound Normal Normalise Normal 0 0 0 Off T reble 0 Mid Sound Mode Balance Bass Surround Main Audio Out (PIP) 1/2 27 Sound Adjustment 1 Press to display the Sound menu. Press to select the menu to adjust. Select the desired level by listening to the sound. Note: Bass, Mid, T reble and Surround settings are memorized separately for each Sound Mode. 2 [...]

2/2 Sound Out Left Channel Right Channel Channel 1 Channel 1 Off Level Meter Off SDI Sound Output On Surround 28 SDI Sound Output Notes: • This menu is available only when selecting a slot that HD-SDI T erminal Board with audio (TY -FB10HD) is installed. • This menu is unavailable when 2-picture display mode is active. SURROUND This menu is dis[...]

× 1 × 2 × 3 × 4 1 Exit 2 EXIT 2 INPUT MENU ENTER/ + / VOL - / 29 Digital Zoom 1 3 2 4 This displays an enlargement of the designated part of the displayed image. Display the operation guide. Press to access Digital Zoom. The operation guide will be displayed. Select the area of the image to be enlarged. Press on the enlargement location to sele[...]

1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 2/2 Setup Screensaver MUL TI DISPLA Y Setup Set up TIMER Portrait Setup PRESENT TIME Setup PRESENT TIME Setup PRESENT TIME MON 99:99 Set PRESENT TIME 99:99 DA Y MON PRESENT TIME Setup PRESEN[...]

Set up TIMER POWER OFF Function POWER OFF T ime POWER ON T ime POWER ON Function Of f 0:00 Off 0:00 PRESENT TIME 99:99 Set up TIMER POWER OFF Function POWER OFF T ime POWER ON T ime POWER ON Function Of f 0:00 Off 0:00 PRESENT TIME 99:99 31 PRESENT TIME Setup / Set up TIMER Set up TIMER Press to select POWER ON T ime / POWER OFF T ime. Press to set[...]

2/2 Setup Screensaver MUL TI DISPLA Y Setup Setup TIMER Portrait Setup PRESENT TIME Setup Screensaver Start Function Mode Side panel Wobbling Peak limit Finish T ime Start T ime White bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Finish T ime Start T ime White bar scroll Off[...]

Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start Time White bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Operating Time Periodic Time White bar scroll Interval 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side pa[...]

Screensaver Start Function Mode Side panel Wobbling Peak limit Finish T ime Start T ime White bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 34 Screensaver (For preventing image retention) Side Panel Adjustment 1 Press to select Side panel. Press to select Off, Low , Mid, High. Press to exit from Screensaver . 2 Do not display a picture [...]

1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 35 Reduces power consumption P[...]

2/2 Setup Screensaver MUL TI DISPLA Y Setup Setup TIMER Portrait Setup PRESENT TIME Setup × 2 MUL TI DISPLA Y Setup Horizontal Scale Off A1 Off AI-synchronization V ertical Scale Location Off Seam hides video × 2 MUL TI DISPLA Y Setup 36 Press to display the Setup menu. Press to select the MUL TI DISPLA Y Setup. Press to display the “MUL TI DIS[...]

Off AI-synchronization × 2 Horizontal Scale Off Off A1 Location V ertical Scale Seam hides video × 2 MUL TI DISPLA Y Setup MUL TI DISPLA Y Setup Off AI-synchronization × 2 Horizontal Scale Off Off A1 Location V ertical Scale Seam hides video × 2 MUL TI DISPLA Y Setup MUL TI DISPLA Y Setup Off AI-synchronization × 2 MUL TI DISPLA Y Setup Horizo[...]

MUL TI DISPLA Y Setup Off Off MUL TI DISPLA Y Setup Horizontal Scale V ertical Scale Seam hides video A1 Location × 2 × 2 AI-synchronization Off 38 Setup for MUL TI DISPLA Y Y ou can set the remote control ID when you want to use this remote control on one of several different displays. 1 2 3 Switch to on the right side. Press the button on the r[...]

2/2 Set up Screensaver MUL TI DISPLA Y Setup Portrait Setup Set up TIMER PRESENT TIME Setup Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup 39 Divide an input image into 3 parts, a[...]

Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup 40 Set up for Portrait Press twice to exit from Setup. 7 Press to select AI-synchronization. Press to select “Off” , “On”. A[...]

1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 3D Y/C Filter (NTSC) Colour sy[...]

1/2 PC Off Standby save Off Power management Of f Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 3D Y/C Filter (NTSC) Colour system Signal On Auto Cinema reality Panasonic Auto (4:3) Off 4:3 [ AV ] Block NR Mosquito NR Off P-NR Off Off Cinema reality Signal Off H-Freq. V -Freq. kHz Hz [...]

1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 3D Y/C Filter (NTSC) Colour system Signal On Auto Cinema reality Panasonic Auto (4 : 3) Off 4 : 3 [ AV ] P-NR Off 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Lang[...]

Sync Auto Sync on G Sync VBS 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup Sync P-NR Signal Auto [ RGB ] Cinema reality Off Off H-Freq. V -Freq. kHz Hz 33.8 60.0 44 Select Signal from the “Setup” menu during RGB input signal. Press [...]

Options Weekly Command Timer Initial VOL level 1/3 Off Off 0 0 Maximum VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP Initial INPUT Onscreen display On O f f 45 Options Adjustments Item Effect Adjustments Weekly Command Timer Sets Weekly Command Timer . (see page 49) Onscreen display On Off On: Displays all the fol[...]

Options On Weekly Command Timer Onscreen display Off Initial INPUT 1/3 Maximum VOL level Initial VOL level Button lock INPUT lock Advanced PIP Remocon User level Off Off 0 0 Off Off Off Off 46 Options Adjustments Item Effect Adjustments Initial VOL level Off On Press button to adjust the volume when the unit is turned on. Off On Off: Sets normal vo[...]

Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 2/3 47 Options Adjustments Item Effect Adjustments Off-timer function Enable Disable Enable: Enables the “Off-timer function”. Disable: Disables the “Off-timer function”. Note: When “Disable?[...]

3/3 Options O f f Off Off V . lnstallation Rotate Slot1 Serial Slot Select Slot power Off Power On Screen Delay 48 Options Adjustments Item Effect Adjustments Slot Power Off Auto On Off: Power is not transmitted to the slot power . Auto: Power is transmitted to the slot power only when main power is on. On: Power is transmitted to the slot power wh[...]

Options On Weekly Command Timer Onscreen display 1/3 Weekly Command Timer On Program1 Function Monday Program3 T uesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit Weekly Command Timer Program1 On Monday Function Program3 T uesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sun[...]

Weekly Command Timer 20:00 20:30 57 58 8/8 22:00 59 --:-- 60 --:-- --:-- 61 --:-- 62 --:-- A VL:00 DAM:NORM POF --- --- --- --- --- 63 64 1 Program Weekly Command Timer 8:00 10:30 02 01 1/8 --:-- 03 --:-- 04 --:-- --:-- 05 12:00 06 9:12 PON IMS:SL1 --- --- --- --- DAM:ZOOM A VL:10 07 08 1 Program Weekly Command Timer 02 10:30 Command No T ime IMS:S[...]

1/2 Signal PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup SHIPPING YES 51 Shipping condition This function allows you to reset the unit to the factory setting. 1 2 3 4 Press to display the Setup menu. Press to select “OSD Language”. Press and h[...]

52 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) No Picture[...]

53 COMPONENT/RGB/PC/VIDEO input signals Applicable input signals for Component / RGB, Mini D-sub 15P ( * Mark) Signal name Horizontal frequency (kHz) V ertical frequency (Hz) Component / RGB / Mini D-sub 15P (Dot clock (MHz)) 1 525 (480) / 60i 15.73 59.94 * (13.5) 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 4 3 625 (575) / 50i 15.63 50.00 * (13.5) 4[...]

54 COMPONENT/RGB/PC/VIDEO input signals Signal format V ertical frequency (Hz) Horizontal frequency (kHz) Dot clock (MHz) Number of active pixels T otal number of pixels Number of active lines T otal number of lines 1 VGA60 59.94 31.47 25.18 640 800 480 525 2 525/60p 59.94 31.47 27.00 720 858 480 525 3 625/50p 50.00 31.25 27.00 720 864 576 625 4 75[...]

55 Command list of W eekly Command T imer No. Command Control details 1 AAC:MENCLR Audio Menu (Clear) 2 AAC:MENDYN Audio Menu (Dynamic) 3 AAC:MENSTD Audio Menu (Standard) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT :0 Audio Mute (OFF) 7 AMT :1 Audio Mute (ON) 8 ASO:M Audio out when PIP mode (Main Picture) 9 ASO:S Audio out when PIP[...]

56 TH-50PF10WK TH-65PF10WK Power Source 220 - 240 V AC, 50/60 Hz Power Consumption Power on 595 W 725 W Stand-by condition Save off 0.8 W , Save on 0.6 W Save off 0.7 W , Save on 0.5 W Power off condition 0.3 W 0.3 W Plasma Display panel Drive method : AC type 50-inch, 16:9 aspect ratio Drive method : AC type 65-inch, 16:9 aspect ratio Screen size [...]

57 Memo[...]

58 Memo[...]

59 Memo[...]

Matsushita Electric Industrial Co., Ltd. Web Site : http://panasonic.net © 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Customer ’ s Record The model number and serial number of this product can be found on its rear panel. Y ou should note this serial number in the space provided below and retain this book, plus your purcha[...]