Paradyne 1754 manual

1752 and 1754 SHDSL Routers User’s Guide Document Number 1752-A2-GB20-00 June 2005[...]

1752 and 1754 SHDSL Router U ser’s Guide Copyright 2005 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protecte d by federal copyri ght law. No part of this publication may b e copied or distributed, transmitted, transcribe d, stor ed in a retrieval system, or translated into any human or computer languag [...]

1752 and 1754 SHDSL Router User’s Guide Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided fo r ventilation. To ensure reliabl e operation of the product and to protect it from overheating, these slots and openings[...]

1752 and 1754 SHDSL Router U ser’s Guide CE Marking When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Parad yne World Wide Web site at www.paradyne.com . Select Library → Technical M anuals → CE Declarations of Conformity . Jap an Class A ITE This is a Class A[...]

1752 and 1754 SHDSL Router User’s Guide ACT A Customer Information This equipment complies with Part 68 of the FC C rules and the requirements ad opted by the ACTA. On the bottom of the network extender is a label that contains, among other info rmation, a product identifier in the format US:AAAEQ##TXXXX. If requested, th is number must be prov i[...]

1752 and 1754 SHDSL Router U ser’s Guide Contents CE Marking .................................................................................................................... 4 Jap an ........................................................................................................................................ 4 EMI Notices ..........[...]

1752 and 1754 SHDSL Router User’s Guide Mac OS 8.x or 9.0 ............................................................................................................. 23 Chapter 3 – Configuring the Router Using EmWeb ................................................. 24 Accessing EmW eb ..........................................................[...]

1752 and 1754 SHDSL Router U ser’s Guide Chapter 4 – Diagnostic and T roubleshooting .......................................................... 86 8 June 2005 1752-A2-GB20-00[...]

1752 and 1754 SHDSL Router User’s Guide Chapter 1 – Introduction Thank y ou f or choosing a 1750 Series SHDSL router as your broadband a ccess solution. This manual is designed to hel p you with the setup and configuration o f your product. 1750 Series Overview The 1750 Series G.SHDSL.bis standalone routers take a dv antage of the latest G.SHDS[...]

1752 and 1754 SHDSL Router U ser’s Guide Applications G. SH DSL /G .SHDSL . b i s I P DSLAM Int ern e t 1752 / 1754 LAN LAN CPE CO LAN A. Connect t o IP DSLAM B . LAN Extensi on 1752 /1754 1752 /1754 CO CPE Specifications Standards Compliance  Auto load balancing with bonded pai rs  ITU-T G.991.2  Supports Annex A, Annex B, Annex F, and [...]

1752 and 1754 SHDSL Router User’s Guide  Password protection  Real time log  Remote access mana gement via telnet  SNMPv1  Stateful Packet Inspection (SPI)  Web based GUI interface Protocol  DHCP client/server and D HCP relay function ality  DMZ support  IEEE 802.1Q VLAN  IEEE802.1P Priority Output Queuing  IEEE80[...]

1752 and 1754 SHDSL Router U ser’s Guide Chapter 2 – Hardware Setup and Startup Front Panel LED and Rear Panel description F ollowing illustrations sho w the front panels of the 2-wire and 4-wire routers. Figure 2-1. 2-Wire 1752 Front Panel LEDs Figure 2-2. 4-wire 1754 Front Panel LED LED Usage PWR Power Indicator. DSL DSL loop activity. On: un[...]

1752 and 1754 SHDSL Router User’s Guide Figure 2-4. 2-wire 1752 rear vie w Figure 2-3. 4-wire 1754 rear vie w Back Panel Featu re Usage DC IN Power Adapter Input Reset Button Reset device to factory default setting CID Connected to PC serial port for console LAN Connected to Ethernet Port DSL 1–2 (1752) DSL 1–4 (1754) Connected to loops 1 thr[...]

1752 and 1754 SHDSL Router U ser’s Guide f orget your pass word or cannot acce ss the de vice , reset the de vice to retur n it to the def ault settings. Follo w this procedure: 1. P o wer of f the router . 2. Press the Reset b utton. 3. With the Reset button st ill depressed, powe r on the router , watching the front panel. 4. When the LEDs b li[...]

1752 and 1754 SHDSL Router User’s Guide Hardware Connection – Model 1752 1. Connect the supplied RJ11 cabl e to the port marked DSL at the back of the SHDSL router. Connect the other end of the cable to your SHDSL source. 2. Insert one end of the RJ45 Ethernet cab le into one of the LAN ports marked LA N on the back of the SHDSL router. Connect[...]

1752 and 1754 SHDSL Router U ser’s Guide Hardware Connection – Model 1754 1. Connect one of the supplied RJ11 cable s to t he port marked DSL 1-2 at the back of the SHDSL router. Connect the other end of the cable to the SHDSL source. Connect the other supplied RJ11 cable to the port marked DSL 3-4. Connect t he other end of the cable to the SH[...]

1752 and 1754 SHDSL Router User’s Guide Configuring Windows PCs To access the router using the web interface, yo u must configure your PC’s TCP/IP address to be 192.168.1. x , where x is an y number between 3 and 254. The subnet ma sk is 255.255.255.0 . Your router’s default IP address is 192.168.1.1 . Windows XP: 1. In the Windows task bar, [...]

1752 and 1754 SHDSL Router U ser’s Guide 5. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radi o button labeled Use the following IP address and type 192.168.1. x (w here x is any number b etween 3 and 254) in the IP Address field. Type 255.255.255.0 in the Subnet Mask field. 6. Click on twice to confirm your changes, and [...]

1752 and 1754 SHDSL Router User’s Guide Windows 2000: 1. In the Windows task bar, click on the Start button, point to Settings , and then select Contro l Panel . 2. Double-click on the Network and Dial-up Connectio ns icon. 3. In the Network and Dial-up Connections window, right-click on t he Local Area Connection icon, and then sele ct Propertie[...]

1752 and 1754 SHDSL Router U ser’s Guide 5. If Internet Protocol (TCP/IP) does not appear a s an installe d component, click on . 6. In the Select Network Component Type dialog bo x, select Protocol , and then click on . 7. Select Microsoft in the Manufacturers box. 8. Select Internet Protocol (TCP/IP) in the Network Protocol s list, and then cli[...]

1752 and 1754 SHDSL Router User’s Guide 10. Click on to restart the PC and complete the TCP/IP installation. 11. After restarting your PC, open the Control Panel window, and then click on the Network icon. 12. Select the network component labeled TCP/IP , and then click on . 13. If you have multiple TCP/IP listings, select the listing associated [...]

1752 and 1754 SHDSL Router U ser’s Guide Configuring Apple PCs To access the router using the web interface, yo u must configure your PC’s TCP/IP address to be 192.168.1. x , where x is an y number between 3 and 254. The subnet ma sk is 255.255.255.0 . Your router’s default IP address is 192.168.1.1 . Mac OS X 1. Under the Apple men u, select[...]

1752 and 1754 SHDSL Router User’s Guide Mac OS 8.x or 9.0 1. Under the Apple men u , select Co ntrol Panels, then TCP/IP. 2. In the TCP/IP control panel, choose t he item that correspond s to your Ethernet interface from the Connect via: drop-down list. 3. Select Manually from t he Configure: drop-down list. 4. Type an address between 192.168.1.3[...]

1752 and 1754 SHDSL Router User’ s Guide Chapter 3 – Configuring the Router Using EmWeb Accessing EmWeb EmW eb is an application for co nfiguring your r outer . It is accessed using a web bro w ser such as Inter net Explo rer v ersion 5 or abo ve . T o access EmWeb on a router set to the f actor y def ault configuration: 1. Attach a PC to one o[...]

1752 and 1754 SHDSL Router User’s Guide • Adva nced: Lets you co nfigure adv anced feature s like Security , IP routes, and Bridge. • System: Lets yo u e xecute system-le vel co mmands li ke Ev ent Log, Fir mw are Update, Backup/Re store, Sa ve configur ation, and Authentication. • Status: Provides inf ormation about the current setup and s[...]

1752 and 1754 SHDSL Router User’ s Guide System status page Click o n System Status to inv oke the system status page from which the status of the bridge/router interf aces or routing table is displa yed. Physical port connection status: If to view or chang e a ph ysical por t configur ation, select a por t to see config uration inf or mation f o[...]

1752 and 1754 SHDSL Router User’s Guide To view or change advan ced configuration setting s for the SHDSL port, click o n View advanced attributes. The SHDSL Port Configuration page is displayed. “Shdsl” i s the default port name. You can configure SHDSL p arameters from this page. 1752-A2-GB20-00 June 2005 27[...]

1752 and 1754 SHDSL Router User’ s Guide 28 June 2005 1752-A2-GB20-00[...]

1752 and 1754 SHDSL Router User’s Guide 1. In the Unit Id drop-down menu, set t he device a s CO or CPE, and t hen click on to submit your setting. 2. To set the router’s Wire Pair mode, click on the Wire Mode drop-d own list to select the Wire Pair number needed. Click o n to submit your setting. Wire Pair DSL Pair to Use Illustration WirePair[...]

1752 and 1754 SHDSL Router User’ s Guide 1. The page displays basic p ort attributes for the Ethernet port on your router. 2. For advanced configuration of Ethernet port attributes, from the Eth1t Port Configu ration page, click on View advan ced attributes. The Advanced Eth1 Port Configuration page is displayed. 3. Update the port attributes tha[...]

1752 and 1754 SHDSL Router User’s Guide Bridge/Router Interfaces: T o view the statistics on Bridge/Router Interf ac es, select a specified interf ace to inv oke the status page. The f ollowing figure sho ws the statistics on the interf ace, rfc14 83-0, under SHDS L por t configuration page . Click to configure WAN connections. The pro c edure re[...]

1752 and 1754 SHDSL Router User’ s Guide System information This page sho ws system information, includi ng MA C address, Firmware ve rsion, hardw are ve rsion, IP address, and the amou nt of time the system has been up . Event Log Click o n Eve nt Log to displa y the Event Log screen: This page displa ys a table containing all configur ation err[...]

1752 and 1754 SHDSL Router User’s Guide Setup pages This page allo ws you to configure W AN and LAN connectio ns. The Setup page allows users to configure: 1. LAN connections 2. DHCP Server 3. DHCP Relay 4. DNS Client 5. DNS Relay 6. SNTP Client WAN Connection This screen allows you to create a nd confi gure WAN connections for yo ur router. You [...]

1752 and 1754 SHDSL Router User’ s Guide Creating a WAN service 1. Click on Create a new service. A page is displayed containi ng a list of WAN service options. 2. Select an option, and then click on Configure . You need to add d etailed configuration information about the WAN serv ice that you a r e creat ing. 3. Click on . The WAN connectio ns [...]

1752 and 1754 SHDSL Router User’s Guide following advanced editing links: Edit ‘Service’ Edit ‘PPPoE’ Edit ‘Atm Channel’ 3. Click on Change . The edit page is displayed an d changes are applied to the servi c e. Deleting a WAN service 1. At the WAN connection s page, click on the Delet e link for a specific service. The WA N connectio[...]

1752 and 1754 SHDSL Router User’ s Guide • DNS Client • DNS Relay • SNTP client LAN connections This option allows you to: • Configure the IP address and subnet of the default LAN conne ction to the Router. • Configure a seconda ry IP address on the same su bnet as the primary IP address. • Create virtual interfaces. Multiple virtual [...]

1752 and 1754 SHDSL Router User’s Guide b. Secondary IP address details. To create/conf igure a secon dary IP addres s, click in the Secondary IP Address te xt box and type the new address details. Once you have configured the IP addre s s(es), cli ck on the button. A message is displayed confirming that your address info rmatio n is being update[...]

1752 and 1754 SHDSL Router User’ s Guide b. Change the options for the existing virtual interfa c e, then click on Change. The page is reset and the new values a r e di splayed. To delete a service: a. Click on the Delete link. b. Check the details displ ayed, and then click on the Delete this conne ction button. DHCP Server This option allows yo[...]

1752 and 1754 SHDSL Router User’s Guide Creating a DHCP server subnet Click on the Create new Subnet link. Th e following page is displayed: 2. This page allows you to: • Set the value and netmask of the subnet (eithe r manually or by selecting an IP interface whose value and mask is used instea d), and set the maximum and default lease times. [...]

1752 and 1754 SHDSL Router User’ s Guide Editing a DHCP Subnet Click on the Advanced Options lin k for a specific subnet. The Edit DHCP server subnet page is displayed. This allows you to edit all of the values that were set when the su bnet was created. 2. This page also allows you to add add itional opt ion information. At the bottom of the pag[...]

1752 and 1754 SHDSL Router User’s Guide Creating a Fixed Host 1. Click on the Create new Fixed Host link. The follo wing page is displayed: 2. Complete the following: a. Type in the IP address that will be given to the host with the spe cified MAC address. b. Type in the MAC address and the ma ximum lease time (default is 86400 seconds). 3. Click[...]

1752 and 1754 SHDSL Router User’ s Guide DHCP Relay This option allows you to: • Enable and disable DHCP relay. • Add DHCP servers to the DHCP relay li st. • Configure and delete server entri es on the DHCP relay list. From the Configuration me nu, click on DHCP relay. The following page is di splayed: Enabling/disabling DHCP relay This scr[...]

1752 and 1754 SHDSL Router User’s Guide Editing/deleting entries in the DHCP relay list 1. To edit an entry, click on an IP addr ess and type a new entry, then click o n . 2. To delete an entry, check the Delete box for a specific IP address, then click on . DNS Client This option allows you to: • Create a list of server addresses . This enable[...]

1752 and 1754 SHDSL Router User’ s Guide Configuring the DNS relay list 1. In the Add new DNS server section, type an address in the New DNS serve r IP addres s text box. 2. Click on . The address is displayed in the Edit DHCP server list section. To edit an entry, click on an IP address and ty pe a new e ntry, then click on . To delete an entry,[...]

1752 and 1754 SHDSL Router User’s Guide SNTP Client The option allo ws you to: • Synchronize Client with NTP Server • Configure SNTP-NTP Server • Set the syste m clock From the Configuration me nu, click on SNTP client . The following page is displ ayed: Synchronize Client with NTP Server Clic k on to f orce the SNTP client to immediately s[...]

1752 and 1754 SHDSL Router User’ s Guide zone should be pre-configure d. Configure SNTP-NTP Server T ype the NTP Server IP address in the text bo x of Add NTP Server IP Address, and then clic k on . T ype the NTP Server Hostname in the te xt box of Add NTP Sev er Hostname, and then cli ck on . Configure SNTP Client Mode Select SNTP Synchronizatio[...]

1752 and 1754 SHDSL Router User’s Guide Select a time zone: Click on the local timezone dro p down list and select a time zone. And then cli ck on to validate your setting. Enter SNTP tr ansmit pack et timeout value , SNTP transmit pac ket retries val u e , and SNTP automatic resynchronizatio n polling v alue in their respectiv e text bo x es. Cl[...]

1752 and 1754 SHDSL Router User’ s Guide Quick Setup p age The Quic k Setup will guide you to configure vir t ual circuits in this de vice. T o set VPI/VCI: 1. Enter the VPI and VCI for e ach service listed. 2. Click o n to submit your settings or to clear yo ur settings. 3. If to create or delete W AN ser vices, cli ck on the Clic k here to Add [...]

1752 and 1754 SHDSL Router User’s Guide Firmware Update This option allo ws you to upload firmware images to the router using HTTP . 1. F rom the System menu, clic k Fir mw are update. The f ollowing pag e is displa yed: 2. T ype in the location of the new firmwa re image that y ou want to upload, or use to browse and sele ct the file. Click on .[...]

1752 and 1754 SHDSL Router User’ s Guide Restoring your configuration 1. From the System menu, click on Backup/restore . 2. In the Restore Configurat ion section, click in the Configuration File text box and type the network path of the file that you wish to rest ore. If you do not know t he path details, click on and locate the file using the Ch[...]

1752 and 1754 SHDSL Router User’s Guide Authentication This option allows you to administer a ccount s for users who access the router. From the Configuration menu, click on Authentication . The following p age is displayed: Creating a new login account 1. Click on the Create a new user . The followi ng page is displayed: 2. Type details for the [...]

1752 and 1754 SHDSL Router User’ s Guide This page allows you to: • Update details for a specific user account. Modify the neces sary text boxes then click on the button. • Delete a user account. Click on the Delete this user button. 2. Once you have edited or deleted a user ac count, the Authenticati on page is di splayed and the table refle[...]

1752 and 1754 SHDSL Router User’s Guide • Configure Intrusion Detection setting s Via the Advanced menu, click on Security and then the followin g page is displayed: Enabling Security You must enable Security before you can enable Firewall and/or Intrusion Detection . In the Security State section: 1. Click on the Security Enabled radi o button[...]

1752 and 1754 SHDSL Router User’ s Guide 3. Click on the button. Configuring security interfaces Security interfaces are based on e xisting LA N services. You must create a LAN servi ce for every security interface that you want to configure. For details on how to create LAN services: 1. From the Security Interfaces section, c lick on Add Interfa[...]

1752 and 1754 SHDSL Router User’s Guide page. Check the interface details, then click on the Delete button. Configuring NAT To configure NAT, you need to: 1. Enable Security; see the Enabling Secu rity section. 2. Create at least two different security inte rface type s based on existing LAN services; see the Configuring Security Interfaces se ct[...]

1752 and 1754 SHDSL Router User’ s Guide 2. Click on Add Global Addre ss Pool. The following page is displ ayed: 3. This page allows you to create a pool of network IP addre sses that are visible outsid e your network. Add values for the following tabl e entries: • Interface type . The internal address type that you w ant to map your external g[...]

1752 and 1754 SHDSL Router User’s Guide Click on Return to Interface List to displa y the Security Interface Configu ration page. To create a reserved mapping, click o n t he Add Reserved Mapping hype rlink. See the Configuring NAT Reserved Mapping s ect ion. Configuring NAT Reserved Mapping Reserved mapping allows you to map an outside security [...]

1752 and 1754 SHDSL Router User’ s Guide Configuring Firewall Policies To configure firewall policies, click on the Security Policy Config uration link under Policy, Triggers and Intrusion Detection as shown. A table is displayed containing details of each Firewall policy. Y ou can now configure the policies to include po r t filters and v alidat[...]

1752 and 1754 SHDSL Router User’s Guide Specify the start and end o f the port range for t he TCP/UDP protocol that you want to filter. Then select TCP or UDP protocol from the Pr otocol drop-down list. After that, use the Direction drop-down lists t o specify whether y ou want to allow or bl ock inbound traffic, and allow or block outbound traff[...]

1752 and 1754 SHDSL Router User’ s Guide you want to configure. The Configure Va lidators page is displa yed. Click on the Add Host Validator link. The following page i s displayed: 2. In the Host IP Address text box, type t he IP address that you want to allow/block. 3. In the Host Subnet Mask text box, type the IP mask address. If you want to f[...]

1752 and 1754 SHDSL Router User’s Guide a. Transport Type. Select a transport type from the d rop-down list, depending on wheth er you are adding a trigger for a TCP or a UDP appli cation. b. Port Number Start. Type the start of the tr igger port range that the primary se ssion uses. c. Port Number End. Type the end of the tri gger port range tha[...]

1752 and 1754 SHDSL Router User’ s Guide The values displayed on th e Firewall Configure Intrusion Detection page are the default values. 2 . Configure Intrusion Dete ction as follows: a. Use Blacklist. Select true or false depe nding on whe ther you want external hosts to be blacklisted if the Firewall detects an intrusio n from th at host. Clic[...]

1752 and 1754 SHDSL Router User’s Guide IP Routes This option allows you to create static IP rout es to destination ad dresses via an IP interface name or a Gateway addre ss. From the Advanced menu, click on I P routes . The Edit Routes page is displayed: This page lists the following informatio n about existing routes: • Whether the route is v[...]

1752 and 1754 SHDSL Router User’ s Guide Deleting a route 1. To delete an existing route, check in the Delete box for a specific route. 2. Click on . Creating an IP V4 Route 1. Click on the Create new Ip V4 Route hyperlink. Th e following page is displaye d. 2. Complete the Create IP v4 Route form in order to configure the route. 3. When you have[...]

1752 and 1754 SHDSL Router User’s Guide Global Bridge Configuration Following figure displays the global c onfiguration settings fo r the bridge. The following bridge information is di splayed: 1. Bridge MAC Addre ss 2. Number of bri dge interfaces configured 3. Type of the Bridge 4. Unicast learning whi c h i s non-configurable, and always set t[...]

1752 and 1754 SHDSL Router User’ s Guide 10 and 100,000 second s. The default value is 300 seconds. If to change the fil ter age, input the seconds desired in the filter ag e field, and then clock on to submit your setting. 11. Traffic Class setting which is the status of traffic class mappin g. If to set traffic class, select your option from th[...]

1752 and 1754 SHDSL Router User’s Guide The following spanning bri dge information is displaye d and allows users to configure: 1. Spanning: spanning tree setting (true o r false) 2. Priority: spanning tree priority value 3. Forward Delay: spanning tree forward delay time (se conds) 4. Hello time: spanning tree hello time (seconds) 5. Maximum Age[...]

1752 and 1754 SHDSL Router User’ s Guide interface in its egress interface list. User priority The user priority to regener ate d user-priority mapping for a bridge interface. 0 Transport Name of attached transport. Priority map The mapping of user priorit y in the incoming frames to the regenerated us er priorit y that would be used for traffic [...]

1752 and 1754 SHDSL Router User’s Guide Option Description Default value Priority 1 The regenerated user - priority to which the user priority with value 1 in the incoming frame should be mapped. 1 Priority 2 The regenerated user - priority to which the user priority with value 2 in the incoming frame should be mapped. 2 Priority 3 The regenerate[...]

1752 and 1754 SHDSL Router User’ s Guide value 3 is mapped. Priority 4 The traffic class to which the regenerat ed priority of value 4 is mapped. 4 Priority 5 The traffic class to which the regenerat ed priority of value 5 is mapped. 5 Priority 6 The traffic class to which the regenerat ed priority of value 6 is mapped. 6 Priority 7 The traffic c[...]

1752 and 1754 SHDSL Router User’s Guide VLAN Configuration Click on VLAN configuration and the n VLAN interfaces page is displaye d as shown in the following figure. Users can configure the VLAN ex i s ting cu rrently or create new VLAN via this page. The following table gives the range of value s for ea ch option, which can be specified with thi[...]

1752 and 1754 SHDSL Router User’ s Guide Edit untagged Ports As shown in the following figure, user can add o r delete a specified untagged po rt. Click on to submit your setting, to clear your setting and to return to previous page. Create a new VLAN Click on Create a new VLAN , the Create a new VLAN page is displayed, as shown in the following [...]

1752 and 1754 SHDSL Router User’s Guide 1752-A2-GB20-00 June 2005 73[...]

1752 and 1754 SHDSL Router User’ s Guide VPN VPN (Virtual private network) is a p rivate data network that makes use of the public telecommunication infrastructu re, maintaining privacy through the use of a tunn eling protocol and security procedures. To configure VPN, c lick on VPN via the Adva nced menu to invoke the VPN Settings screen. To act[...]

1752 and 1754 SHDSL Router User’s Guide 2. WAN services information allows u s ers t o view and delete a specified service. Following table shows the definition of e ach field. Field Description Valid Created successfully interface name Name of the interface ikeport The IKE port value; the UDP port number on which IKE daemon listens on all valid [...]

1752 and 1754 SHDSL Router User’ s Guide Following table shows the definition of e ach field. Field Description Valid Created successfully interface name Name of the interface policy name Name of the policy Selector name Name of the selector Action The action specified by the policy (deny, bypass or applyipsec) Click on View, and then IPSec Polic[...]

1752 and 1754 SHDSL Router User’s Guide Following table shows the definition of e ach field. Field Description Valid Created successfully Policy Name Name of the policy First SA Name Name of 1s t security association Protocol Each SA supports a single se curity protocol - AH or ESP. If you want to use both protocols simultaneous ly, you need to c[...]

1752 and 1754 SHDSL Router User’ s Guide Edit IPSec Config If to create a IPSec, the procedure is shown as follows: Step 1: Crea te a new IPSec selec tor Click on the Create a new selector link. The IPSec Selecto r page i s displayed a s follows: Input the values on the fields respectively. T he following table gi ves the range of values for each[...]

1752 and 1754 SHDSL Router User’s Guide Step 2: Crea te IPSec Interface Click on the Create IPSec Interface link, the IPSec Interface page is displayed as follows: Input the values on the fields respectively. T he following table gi ves the range of values for each option, which can be specified wi th this command and a default value. field Descr[...]

1752 and 1754 SHDSL Router User’ s Guide Option Description Default value interface name Name of the interface n/a Selector name Name of the selector n/a Policy log Enab les or disables the status of the IPsec policy log. false Policy status Enables or disables the status of the IPsec policy. false Policy priority The priority for the policy look[...]

1752 and 1754 SHDSL Router User’s Guide Input the values on the fields respectively. T he following table gi ves the range of values for each option, which can be specified with this command. Option Description Interface name Name of the interface Policy name Name of the IPsec policy prev iously created. Encry Key Encry Key is a cryptographic key[...]

1752 and 1754 SHDSL Router User’ s Guide Option Description Df Bit Df Bit indicates how the Don’t Fragment (DF) bit in the IP header should be be handle d in tunnel mode. You can choose from the following dfbitcfg values: If copy is set, the DF bit in the outer IP (tunnel) header is copied from the inner IP header. If set is set, the DF bit is [...]

1752 and 1754 SHDSL Router User’s Guide SNMP Click on SNMP to invoke the Edit SNMP Conf ig screen where you can edit SNMP (Simple Network Management Prot ocol ) configuration. Enter or select the appropriate value s. Click on to submit your setting or to clear your setting. The follo wing table gi ves the range of values for each option. Option D[...]

1752 and 1754 SHDSL Router User’ s Guide Ports This option allows you to configur e the SHDSL p o rt on your router. 1. From the Advanced menu, click on Port Configuration . The SHDSL port available on your router is displayed. From the Ports Configuration men u, click on SH DSL. The SHDSL Port Configuration page is displayed: “Shdsl” is the [...]

1752 and 1754 SHDSL Router User’s Guide Wire Mode DSL Pair to Use Illustration 2-Wire Mode 1 4-Wire Mode 1,2 6-Wire Mode 1,2,3 8-Wire Mode 1,2,3,4 DS L 1 2 3 4 3. Click on the Line Probe drop-down list to set line prob e as enable or disable. 4. Click on the Annex drop-down li st to select the desired annex mode: A, B, A&B, F, G, or F&G. [...]

1752 and 1754 SHDSL Router User’ s Guide Chapter 4 – Diagnostic and Troubleshooting ____________________________________________________________ _________________________ Use the LEDs to deter min e the status of connections. Description Suggestion Power LED, Ethernet LED, or DSL LED is not lit. Check the appropriate connection. Ethernet LED bl[...]